Prusa balance game
You may chose between 2 characters ( Jo Prusa and Baby Dragon ). All models are designed to be suportless so you dont need them for succesful print.
- Downloads
- 24,124
- Likes
- 5,366
- Rating
- 4.97
2,018 models
You may chose between 2 characters ( Jo Prusa and Baby Dragon ). All models are designed to be suportless so you dont need them for succesful print.
Support me: Post a Make and Comment PayPal Venmo: @paulorfo Cash App: $paulorfo ------------------------------------------- News: 12/15/2023: “ Testris_TS_… ” is a travel size version at 50% of the original size. NOT TESTED. Please let me…
Juega el Tetris en la vida real, esta vez evitando perder el equilibrio
Lately, I’ve been experimenting with emergency whistles. Here’s my first attempt let me know what you think or what I could improve!
This is a stacking game where players carefully place complex 3D pieces onto a growing structure, judging alignment, weight distribution and stability. While the goal is to build higher than your opponents, pushing the structure too far…
After the first attempt I made this one louder and easyer to print.
For single player this simple balancing game has one main goal… see how many dinos you can stack on the wobbly base. With two players you will need two of each dinosaurs printed. Each player will start with 10 dinosaur pieces. Then one…
partage d'un ficher payer imprimable en PLA ou resine, support obligatoire
I found this great game of Tetris to play with the grandkids. printed it and loved it. I printed 6 sets of pieces which is plenty. I designed a box to put it all in. You don't have to print it in colors, but if you have a BambuLab or…
I made a very simple box/case for the game with integrated stand. The existing game board will act as the case cap/lid without any modification requirements. There is enough space between the game board and the box to pick the figures out…
If you like my model, you can reward me by purchasing it on Cults3D at the link below: https://cults3d.com/en/3d-model/game/balancing-hat-only-40-minutes-print
This is an improvement on the rather popular "Floating Cup (smoother look, foolproof assembly)", https://www.printables.com/model/164778-floating-cup-smoother-look-foolproof-assembly . See that model for some notes and directions of how…
Just quick remix. Scaled down to 85 percent of original. To spice things up a little use different colors in layers while slicing (M600 command or pause-change filament-resume). Print 4 pieces of every tetris-piece, it will fit easily…
This is my “Ultimate” version of this game, with quite a few new play possibilities to make it even more fun. Hope you will enjoy it, and please let me know if you've ideas to improve it, I'll design the parts. Please note that I won't…
Here is the original part : https://www.thingiverse.com/thing:3888958 Enjoy!
Little acrobats balancing and stacking game. Printing with more infill will result in heavier acrobats that are easier to stack. Acrobats available with and without smiling face. Can be scaled down for a mini desktop stacking game. Have…
Print each furniture piece at least 4 times . Use any colors you like for better visibility and fun. How to Play Place one piece as a base. Stack furniture pieces on top of each other to create a balanced structure. Same-type elements…
If you like the model, please give a like 💟 and post your prints 📸. 💡 Prusa balance game - Darth Vader, Stormtrooper, Mandalorian, Yoda, Dwayne The Rock Johnson, Pinguin, Tux, Snowman, Christmas Tree, Gnome, Santa, Benchy, Pikachu,…
A Detailed Parts List can be found in the description of the YouTube Video below: This robot does not require any supports to be printed. Designed by Kelton Serra (Build Some Stuff) in Fusion360.
Hi, I created a balancing game with a figure, you stack them on top of each other in the shape of a pyramid, whoever falls down loses. It also comes with a nice box that can hold about 80 figures. Enjoy
Hello, the original author of the model has contacted us to check your remix as it does not meet the license conditions or is not a transformative remix of the original. Since your remix violates the license and rules of the original…
Update 26.05.2024: Added version for 4-color multicolor print (AMS & MMU). Summary This is a model of a Mitsubishi Evo 4 (Lancer Evolution IV) in a kit / gift card style. Some characteristic details can be discovered. Equipped with…
This is a fun and challenging balance Tetris game. The game is simple to play: simply print as many sets of pieces as you need (I printed 1 set per player, but 2 sets work great). Every palyer get one pieces of each type. The first player…
This is my design for self leveling / gyro cup or a MUG holder. You can install on adult walking aid, baby stroller handlebars for bicycles. I was inspired from the design…
Picture this: You're an experienced chess player who has hit a plateau at 500 elo. You feel stuck and bored with traditional chess. Then you think, what if I made chess even harder? Well do I have the game for you! Balance Chess…
Introducing the FDM (Fixum Dude Motors) print in place ambulance. Inspired by the Clockspring3D Flippy Ladder Firetruck ( https://www.printables.com/model/488109-flippy-ladder-firetruck-filament-stories-and-hotma ), but all new from the…
Update 25-Nov-2025 Tree and Latches updated to R4. Added internal feature to the Tree to increase strength. Thanks to Slant3D for the idea. 23-Jan-2024 Uploaded game pieces with a round base. Original hex base game pieces will also fit .…
Self-balancing bat, print in place and optionally glue the teeth on (as far forward as possible); have also uploaded a single tooth if you would like the bat to spin. Also included a version with a hole to hang the bat, should balance on…
Since I saw a mechanical watch for the first time I wondered: How do they work? Why does it tick and why is it ticking with a constant frequency? And why is there this thing, which keeps tilting from one side to the other? To answer my…
LANCE OF LONGINUS IN EVANGELION Category: Toy & Game Accessories
Use the pliers to separate the parts and then assemble the car. The model is on a scale of 1:64. To scale a model from 1:64 to 1:43, you need to use a scaling factor of 148.8% in the slicer Printing this model with multicolor produces a…
Toolbox/casing for the Tetris Balance game, with or without colors The ‘balance’ have a reserved emplacement in the toolbox lid, it stays in place as it is a tight fit and 3 clips retains it. The tray that holds pieces is removable to…
This small santa hat has a special trick: it balances! Printing Instructions (Standard): I recommend PLA with 0.2mm layer height, 5-10% infill, 2-3 walls, and no supports! Print as oriented. I printed in matte white PLA and colored the…
The Avro Lancaster was a heavy bomber aircraft used primarily by the Royal and Canadian Air Forces during the Second World War and saw extensive use with over 7000 being constructed. In its versatility it would carry some exotic ordinance…
Compared to original, it has adjusted scale to 150 mm wide base, letters are set in 0,25 mm deep (first layer) and it has added chamfer 1 mm on the all edges.
https://www.printables.com/model/633194-pru https://www.printables.com/model/669446-prusa-balance-game-collapsable/files https://www.printables.com/model/667011-prusa-balance-game-accessories-box-and-two-piece-s I have included: The…
Summary This is a model of a Lancia Delta HF Integrale Evoluzione 2 in a kit card style. Some characteristic details can be discovered. Equipped with seperate exhaust ;-) After printing, the model can be assembled with the help of…
Simple and easy to print without supports Balancing Game Choose your color and enjoy!
Dinosaur Stack is a fun and creative 3D printed game that focuses on balance, patience, and skill. The goal of the game is simple: stack the dinosaur figures on top of each other without making the tower fall. Each dinosaur has a…
I have printed this holder with PETG and it's been working great for months now. Every file is to be printed once, with the exception of the spacers , which you will need 4. Apart from the printed files, you will also need: For the cup…
parts size adjusted for easier storage
3D MODEL DESCRIPTION My father needed a blade balancer for his lawnmower blade this summer, so I designed him one. How it works: If the blade is unbalanced, one of the edges will weigh further down than the other. Then you have to remove…
Saw this in an advert somewhere and thought it'd be a fun little project! Pretty easy to print and the game is self explanatory (whoever tumbles the pile first loses). The original also has cards that tell you what piece to play to make…
Place as much piranhas to the base as you can. Try it by one hand only. Share your best result with friends :)
Storm Trooper: https://makerworld.com/en/models/221166#profileId-239784 Darth Vader: https://makerworld.com/en/models/221163#profileId-239884 --- Commercial Use --- By purchasing this design on Cults , you support my work and receive a…
Since I saw a mechanical watch for the first time I wondered: How do they work? Why does it tick and why is it ticking with a constant frequency? And why is there this thing, which keeps tilting from one side to the other? To answer my…
The Prusa balance game is a great model and a source of much fun. However, it lacks: a box to contain all the parts, and a two-piece base for easy disassembly and storage in the box. This remix addresses both issues. The connector between…
🇲🇦 مرحبا بك في المغرب Welcome to Morocco! This model was designed by Dany Sánchez . After living in Casablanca for 2 years, Dany said farewell with this grand model of the Mosque Hassan II, landmark of Casablanca and one of the largest…
It's Swing-Wing Saturday Muh dudes! and so I present this beauty, which has been a long time in the works. In addition to this, Swing Wing Saturday will be once a month. As the name suggests, the kit card will have a variable sweep wing,…
A simple mechanical calculator powered by gravity and trigonometry! Either when teaching a child to do basic addition and subtraction, or when explaining more complex concepts to a physics class, like center of mass and mechanical…
A starter for the urgent desires. So, com board is ready and was done with M3 heat inserts in mind. As there is currently no idea of where it would commonly fit this is not the final solution. I for my part will fit it into a gridfinity…
This is a silhouette model of the car. The default stl is approximately 40cm and 2mm thick. You can scale it as you like in your slicer, but don't scale it uniformly, otherwise the thickness will change (try to keep 2-3mm). Add…
Rescaled a popular gnome figure and placed on a hex tile to be used with Prusa Balance game. Original gnome: https://www.printables.com/model/178691-gnome-christmas-tree/ If you need some matching hex baskets to catch and store your…
Short and fun balance game. For two or three players. Roll a dice and see what object you need to put on the unstable base. The one who fails to put the object on the base and keep it stable lose. The youngest player decides who starts.…
J'invoque le tous puissant dragon blanc aux yeux bleu !!! <(^^)>
This is the Yeetlance: a shell-ejecting, breech-loading, single-shot, half-length dart blaster. Practical? No. Competitive? No. Fun? Oh absolutely. Update 2024-01-20 p2: Added missing O-Ring for bolt plug seal to BOM. Update 2024-01-20:…
Introducing the Lancehorn from Horizon Zero Dawn! This machine is to scale with the official board game and stands on a 30mm base. It is intended to be printed in one piece with the base attached for stability. All credit for character…
My daughter asked for a Barbie Gymnastics set from Target for her birthday. After purchasing the one she wanted ( https://www.target.com/p/barbie-174-careers-gymnastic-coach-dolls-playset/-/A-52607245#lnk=sametab ) and realizing how…
The LOVE Balance Sculpture is a modern decorative piece that blends minimalist design with pure emotion. 3D printed with a matte red finish, it transforms the word “LOVE” into a balanced three-dimensional structure full of movement and…
This is a remix to address some issues I had with the original design. Printing info: PLA 0.4mm nozzle 0.20mm layer height 15% infill [UPDATE 6/22/2026] Per request, here are the diameters for the steps on the original model as posted.…
Supersonic variable-sweep wing, heavy blended wingbody bomber, Remix of a FMS Model source: http://logic-wizard.art.coocan.jp/fms_e.htm https://en.wikipedia.org/wiki/Rockwell_B-1_Lancer Category: Vehicles
Build Info: Parts can be printed with PLA. No supports needed Worth mentioning: The blocks can be printed individually or as a kit. The number of blocks required to fill the optional storage container is shown in “( )” in the model name.…
Printed in 0.15 mm layer from Prusament: PLA Lime Green (Blend) PLA Prusa Orange PLA Lipstick Red PLA Pearl White (Blend) PLA Pineapple Yellow PLA Royal Blue (Blend) PLA Prusa Galaxy Black PETG Clear All types of blocks are 4x.
Ocean-themed stacking and balancing game Made for all ages – kids, adults, families, makers Perfect for game nights, classrooms, office desks, or chill solo play Easy to print, no supports needed Mix colors, scale parts, or paint your own…
The players take turns stacking the stones. When the tower tips over, you add up the number of stones. After several rounds, the total is added up. The player with the fewest points wins.
Inspired by the original Balancing Acrobats , this redesign takes the challenge to a whole new level. While the original focused on vertical stacking, this version introduces wild, multidirectional chaos. The unique geometry allows you to…
I tried to make the size so that the weight is the same if you use similar infill for the dragon and mario. Needs supports. Edit: Added a V2 for the model which makes mario better fused with the bottom pad. Also makes him bigger to be…
I added the base that goes with the cone. I lost it years ago and had been using a nail to balance the cone. I forgot about the base when I made the first model. Printed with no supports in about 90 minutes.
Baby Yoda: https://makerworld.com/en/models/221166#profileId-239784 Darth Vader: https://makerworld.com/en/models/221163#profileId-239884 --- Darth Vader Character --- !!! NO SUPPORTS NEEDED !!! U can print that without support, using…
One more for the CSHMFSEU (Clockspring3D/Hot Makes/Filament Stories Extended Universe)! Presenting an ambulance remix of the awesome Hot Makes/Filament Stories Flippy Ladder Firetruck to complete the first responders set. Original…
This is an easy-to-print platform for supporting the balance wheel during a watch service. It is similar to Bergeon item #7990 “Support for Cleaning the Impulse Pin”. In addition to allowing for cleaning of the roller jewel, it makes a…
English: This corner mount is for Reolink TrackMix Wifi security camera. Besides the printed parts you need: 4 x Heated Inserts M4 4 x M4 screw (12-16mm long should work) the 4 screws and dowels that came with the camera + two additional,…
can be printed together or separately in other colours can be printed without support the Chevrolet Avalanche is very realistic Print in place kit card , Assembly required
A new spin on an old idea. Indulge in this entertaining and engaging balance game that draws inspiration from Tetris. Begin by printing out your game pieces (it is suggested to have 6 sets, but some players may find that 8 or more work…
This is a remix of the Balance Tetris box to fit the Ender 3 build plate as well as to enable multi-colour with inserts of the letters and the bottom of the holes for the pieces. This model uses less material while able to fit the same…
3D Tetris Balance is a physical tabletop game that combines spatial reasoning, balance, and a bit of luck. Inspired by classic Tetris shapes, players take turns placing lightweight, open-frame pieces onto a curved see-saw base. As the…
Llavero del iconico personaje de one piece Edward Newgate (Barbablanca) Barbablanca es... Ese hombre es... El único que
Full instructions are at https://www.lampysecurity.com/ Supports are required, and only around 15% infill is needed.
Pequeña ruleta con 7 separaciones en blanco para poner lo que sea, usa un rodamiento o bearing 608 para poder girar libremente English Small roulette with 7 blank spaces to put anything, use a 608 bearing to rotate freely
There's no turning back with Clancy (unless Hank orders him to). He's fully embraced his fake crustacean life and will do anything for his comrades.
I just took paulorfo's dice and replace the inverted z with the v piece of Bhorian's balance Tetris game
An old file from my Pepakura making days that I discovered in Pepakura Designer you can export to .OBJ and in "Windows 10 3DBuilder or 123Design" export to .STL. Unfortunately I don't have the skills yet to improve further on the model,…
The object of this game is to build the tallest tower by fitting the elephants and the balls together without letting them fall HAVE FUN! Printing tips: PLA, 20% infill , 0,25mm layer height
Self-Customizable Sign for Labeling This blank sign is designed for you to personalize and label as you need! You can add your own text in several ways: After Printing: Simply write or draw on the sign with a marker or pen. Before…
TinyMtn Free Pack 14 - Alps This is a package with sets of 3D model files for four iconic mountains in the Alps. Mont Blanc, 4810 m / 15,781 ft Eiger, Jungfrau, Mönch, 4158 m / 13,642 ft Matterhorn, 4478 m / 14,692 ft Monte Rosa, 4634 m /…
A friend of mine has a Mitsubishi Lancer and he had these covers stolen/broken. And of course, ordering online would have been way too expensive. Fortunately he had one left that was partially broken, but I managed to take measurements…
Added another layer to the original design to hold the individual Battery strap strongly in place - minimizing potential damage to the FC/O4 air unit during a crash. Added a version that holds the XT30 cable firmly in place, away from the…
I wanted to make some fun pieces for the balance game. They are the same height as the Joe Prusa piece. They vary a little, but are within 0.50 grams of each other. PLA 10% infill with 3 walls No Supports
Updated 5/29/26!! - Changed shaft interface to reduce error in assembly - Increased thickness of parts to increase durability Use this tool to help balance the ratchet on your Beyblade X beys. I saw too many people selling a simple…
Personally, this is my favorite spinning balancing bird model as it looks clean and is easy to print. Print upright with supports (raft/brim recommended) . Birdwithcavity STL file allows you to hot glue a counterweight like a coin into…
Bigger base for more fun Pack of 21 tetris cube shapes New tetris cube shapes for off-axis play Bigger base optimized for Prusa MINI (90% scale) More shapes, more fun
This Marble Balance Maze recaptures part of my (and maybe your) childhood! Inspired by the original Brio marble labyrinth game, players navigate their marble from the start to the finish, winding around obstacles and pitfalls along the…
Having printed the Prusa balance game board in brown and green to look like a tree, I decided I needed some tree dwelling creatures to finish the game off. I couldn't find any ready made game pieces along that theme, so opted to remix a…
Just a fun little project I did to make a gift set for somebody.
Meine bärenstarke selbst erstellte CaliBär Figur als Spielfigur fürs Prusa-Balance-Game!
Please click ❤LIKE❤ if you appreciate my work 😊 The rally legend – now on your wall. This 3D printable model of the Mitsubishi Lancer Evolution V is a tribute to one of the most aggressive and iconic 90s performance cars. Wide fenders, a…
The model is for RC car scale 1/5. It is a copy of the original Speedline Montecarlo with brake vent. There are two files for the brake vent: SINGLE SOLID: it is the model for the printer with one extruder (one color); DOUBLE SOLID: it is…