Search results: listi

Sort order

2,041 models

P
PrintablesThinkable

Realistic Skull Candy Bowl | Halloween Skull Decoration

Awesome Skull Bowl for Halloween candy/decoration. I would love to see your makes! Post them below. This is easily one of the coolest 3D prints I've done. It was designed for no supports, but I would use supports of at least 75+ degree…

Downloads
50,555
Likes
10,571
Rating
4.96
P
PrintablesMatt-G

Playstation 5 (PS5) horizontal stand minimalistic version

Hello There I made a minimalistik version of my horizontal stand. I was inspired by Jon May and his digital stand. This version uses 50% less Material and has a little better fit. I hope you like this Version as well and post a make or a…

Downloads
4,472
Likes
371
Rating
4.94
P
PrintablesI_L_T

minimalistic.tray

Uncluttered, clear and unfussy - a simple tray for small parts like electronic components, screws and nuts, jewelry and other filigree parts. For a clean and sorted desk. Printed with Prusa Mini+ Print instructions Printed with PLA 0,2mm…

Downloads
3,361
Likes
193
Rating
5
P
PrintablesFH

EcoGrid - Minimalistic Gridfinity Base

The motivation for designing yet another Gridfinity base grid was the hour of print-time and the sub-par angles on the original design. I figured that it's not necessary to extend to grid completely to the top of the 45° angle. Once…

Downloads
2,781
Likes
429
Rating
5
P

Minimalistic Tree Jewelry & Ring organizer

I wanted a little organizer for my hair ties and jewelry, so I made this little low poly tree. Prints with no supports and no extreme overhangs. The tree just slides in the base after printing. 0.2mm layer height PLA I've used these…

Downloads
2,391
Likes
852
Rating
5
P
Printablessh

🍂 Organic leaves set (realistic look)

Info: decorative organic leaves collection can be bent when heated (hair dryer for example) to look more realistic Print info: 0.2mm layer height no supports be sure to have perfect 1st layer but some bad 1st layer can also create…

Downloads
1,803
Likes
455
Rating
4.96
P
Printablesstiaro

Minimalistic Solder Fume Extractor

Introduction Minimalistic solder fume extractor with 120mm fan and two active coal filters. Easily prints in three separate parts and slides together into a space efficient and sturdy package. The bottom is fastened with two countersunk…

Downloads
1,508
Likes
467
Rating
4.54

Minimalistic PS4 controller stand

I used a 3D scan of the PS4 dual shock controller and used it to create part of a negative mold to better fit the controller on the stand. here is a stand for single controller and one for 2 controllers. When printing rotate the model so…

Downloads
1,459
Likes
118
Rating
5
P
PrintablesTWB

Minimalistic Card-sized SD Card Holder

Suggested print settings for the Main Body : Layer height 0.2mm. Infill 20%. Perimeters: 5 (for strength and aesthetic). No supports are needed. Suggested print settings for Micro SD attachment : Layer height 0.2mm. Infill 15%. Brim:…

Downloads
1,224
Likes
314
Rating
4.8
P
PrintablesLuke

Minimalistic Zip Tie Under Desk Cable Organizer

Highlights: Print time less than 20 minutes Uses only 5.5 grams of filament per object Screws in to desk using either #6 screws (M3/M3.5 equivalent) or you could use command strips for a less permanent solution Does not require supports!…

Downloads
1,198
Likes
644
Rating
4.94
P
PrintablesGiantBrain

Minimalistic HexScraper – Compact Print-Bed Scraper

Clean bed. Fresh start. The Minimalistic HexScraper is a compact, one-piece scraper for removing filament remnants from your 3D printer’s build plate. A central grip keeps the tool close to your hand, while the hexagonal shape provides…

Downloads
1,023
Likes
173
Rating
4.86
P
PrintablesVojtěch_L

Coaster - circle (minimalistic)

Ironing on 0.10 No supp

Downloads
871
Likes
272
Rating
4.57
P
PrintablesKLM

Minimalistic Extruder Rotation indicator

This was designed to be used with a cylindrical magnet (8mm diameter by 10mm long) This is a press fit, no glue is required... Print instructions 200 microns works fine !

Downloads
832
Likes
87
Rating
4.78
P
PrintablesMarkus

Minimalistic dual angle phone stand

A nice and simple phone stand for your table or desk. The phone can be set in two angles, about 80° and about 60°. The steeper 80° angle works in portrait mode aswell.

Downloads
711
Likes
37
Rating
4.4
P
PrintablesVojtěch_L
Downloads
695
Likes
262
Rating
5
P
PrintablesVojtěch_L

Minimalistic pen holders - curve

Minimalistic pen holders - curve. No supports. Maximum details.

Downloads
616
Likes
263
Rating
5
P
PrintablesPolyForge

Cat – Cute or Realistic 3D Figurine

This cat sculpture captures the grace and personality of a feline companion. Whether posed sitting, sleeping, or playing, it brings warmth and charm to any shelf or desk. Printing : Suitable for both FDM and resin printers Supports :…

Downloads
606
Likes
54
Rating
0
P
PrintablesWim V

Frighteningly Realistic Looking Spider Knob

Do you have something to hide and is your roommate afraid of spiders? Then use this knob….. Or just because you like such a knob or spiders. To operate you have to grab the spider by the lower body. Original design. The model I used for…

Downloads
605
Likes
86
Rating
5
P
PrintablesFabianVeile

Minimalistic Compliant Photo Holder

Hi, this is a minimalistic compliant picture holder. You can use it to hold pictures or notes. You can combine several of them to hold larger photos. I tested it with a few photos, if you need a stronger version just let me know! I tried…

Downloads
579
Likes
135
Rating
4.9
P
Printablesgenau14zeichen

Minimalistic Wall mount for Raspberry Pi 3b / 4 Armor Case

Simple wall mount for the RPi4 armor case. Uses very little filament and prints quickly. I used PETG but PLA should also work. Has a nice fit and you can easily slide your Pi in and out after installing it to your wall. I printed the…

Downloads
578
Likes
60
Rating
5
P
PrintablesPrint Buddy

Realistic 3D Sparrow Model – High Detail Printable Bird Sculpture

Bring nature to your 3D printing collection with this highly detailed, realistic 3D model of a sparrow! Designed with precision and printed using the Elegoo Neptune 4 Pro, this lifelike bird features intricate feather textures and a…

Downloads
539
Likes
28
Rating
3
P

Minimalistic Xbox Controller Stand

This is an original design that prints fast. It fits Xbox Series S, X, and One controllers perfectly. It could fit other controllers too. Print in your favorite color and put stickers on the flat front, or model a raised logo in…

Downloads
500
Likes
51
Rating
5
P
Printablesi6o6

Minimalistic pen holder

“I have way too many pens, pencils, markers, small tools, and other assorted things that I jam into vase mode prints around the house” The solution to this problem is not to make an even bigger cup than the current one you use but to get…

Downloads
484
Likes
97
Rating
4.86
P
PrintablesSunny_print

Minimalistic Analog Clock

Do you want a small clock that is not boring and ugly but shines in your interior with a minimalistic touch? Well, here is the Minimalistic Analog Clock for you to print. This clock was designed to fit a Quartz clock mechanism (I took one…

Downloads
482
Likes
272
Rating
4.8
P
PrintablesSuturedUser

Realistic dragonfly wings (read description before printing)

This STL works better the larger you print it when slicing. After several tests with my .4mm nozzle the details weren't all visible until 180%. I like to keep X & Y at 180% and leave Z lower ~115% to keep them nice and thin (use .gcode or…

Downloads
428
Likes
69
Rating
0
P

Bear Tracks - Make realistic looking prints

Make Grizzly Bear Tracks You can use this model grizzly bear paw print for realistic footprints for education, learning about animal sign or for pranks. This is designed to make life-like tracks in sand, snow or mud and left and right…

Downloads
271
Likes
65
Rating
0
P
PrintablesUnicornDonut

Split Feathers (Remix of Super Realistic Feathers)

Same steps as the original in cura but adapted for printables. Mix and match to suit all of your feather needs! see original model for more detailed instructions best to pull these off the second the extruder moves up for the easiest…

Downloads
270
Likes
38
Rating
0

Minimalistic (BOSCH) 18V POWER FOR ALL Wall Mount

ENG Compatible with 18 V POWER FOR ALL ALLIANCE batteries from all manufacturers. Prints without supports, PLA is fine. For the mounting I recommend M3,5 screws. For easier mounting please find the spacer attached. DEU Kompatibel mit 18 V…

Downloads
267
Likes
33
Rating
5
P
Printablesmichiel J

realistic grim reaper

An extremely realistic grim reaper. It has a skull on the scythe. Recommend 0.1mm or 0.15mm layer lines. Be extremely careful when removing the support around the staf, its possible but you need to be patient. I would also tune the…

Downloads
243
Likes
32
Rating
0
P
Printables3Dietzmann

Cheap, minimalistic razor holder/ razor stand // günstiger, minimalistischer Mühle Rasierhobel Halter, Ständer

The majority of razor stands are big, heavy and expensive to print. I designed a cheap and minimalistic one for my Mühle Rasierhobel/ Mühle razor plane. Instead of the original Mühle one, that costs around 25 Euro, my alternative costs…

Downloads
232
Likes
35
Rating
5
P
PrintablesDownTheShed

Cascading Slide Slim Minimalistic Wallet

Easy to assemble, can hold 8 standard size cards, alternate models for more cards soon. fits into nearly any pocket. print file included, this worked for me and I just used a little super glue to secure it better. place the slider into…

Downloads
196
Likes
25
Rating
4.33
P
PrintablesTWB

Minimalistic Card-sized Nintendo Switch Game Card Holder

Suggested print settings for the Main Body : Layer height 0.2mm. Infill 20%. Perimeters: 5 (for strength and aesthetic). No supports are needed. Suggested print settings for Cover : Layer height 0.2mm. Infill 20%. Perimeters: 5 (for…

Downloads
166
Likes
24
Rating
4
P
PrintablesJeyMco

Prusa Mini Enclosure minimalistic + low budget (2mm plexiglass, M4)

My personal journey for a first bigger project. I wanted to build my own enclosure with cheaper materials fitting my printer setup and table. I made this to use the cheapest (2mm) plexiglass from the DIY shop and cut mine to be 4 sheets…

Downloads
142
Likes
36
Rating
0
P
PrintablesMutherFluffer

Pug Dog Bust – Realistic Dog Sculpture

Features Realistic Details – Carefully sculpted to highlight the Pug Dog's signature facial features and fur flow. Designed for FDM Printing – Prints cleanly with supports under the chin and ears; ideal for resin or high-resolution…

Downloads
96
Likes
12
Rating
0
P
Printablescrazy_CHicken

Maker Wallet - remix from Agustin "Flowalistik" Arroyo

-Enlarged cardcompartment from 4 to 6 cards. Uploaded model is without logo on lid

Downloads
84
Likes
4
Rating
0
P
PrintablesMichal

MiBand 6 minimalistic charging stand

Minimalistic holder/stand for MiBand 6 serves for stable charging without tangling all this stuff together. Also, free hanging cables attracts cats, so this gadget can be called cat-protector. You'll need: bolt M3x12 + nut small zip tie…

Downloads
83
Likes
8
Rating
5
P
PrintablesQuint

Minimalistic Teabag Carousal

Updates 10-03-2023: First upload Parts The teabag carousal consists of 3 parts. A low-profile stand, teabag holder, and stand stop. Stand The low-profile stand is an essential part of the teabag carousel, and it is designed to hold the…

Downloads
63
Likes
24
Rating
0
P
PrintablesRafael B

Mimi Minimalistic Flower Pot / Vase

Mimi Minimalistic Flower Pot / Vase Print using Vase mode and 0.10 layer size

Downloads
48
Likes
3
Rating
0
P
PrintablesDukeGuni

Minimalistic netgear gs305v3 mount

Used this mount to attach my switch with a tesa stripe under my table. Because the mount is so minimalistic it only works with good filament and good printer settings. happy printing!

Downloads
33
Likes
4
Rating
0
P
PrintablesAdriendel

Minimalistic square smart switch cover (Sonoff)

Sonoff smart switches are great... except some of them have a constant LED light that cannot be switched off! This simple, minimalistic cover will go on top of your Sonoff smart switch to cover the light. It has grips on the sides for…

Downloads
31
Likes
2
Rating
0
P
Printableszazu

Minimalistic Holder for (un)original Prusa DryBox on the Prusa Enclosure

Minimalistic (un)original Prusa drybox holder for the original Prusa enclosure additionally you need the following parts: 8x M3x6 or longer screws 4x M3 nuts

Downloads
20
Likes
7
Rating
0
P
PrintablesZŠMoravská

Medaile k cyklistické soutěži

Model kola vymodelovaný v programu Tinkercad. Kolo vytištěné v různých barvách slouží jako medaile. Ke kolu připojená plocha obsahuje logo naší školy. V programu Tinkercad je možné toto logo změnit (rozpojením objektů a přepsáním textu).

Downloads
18
Likes
1
Rating
0
P
Printablesagepbiz

Minimalistic Xbox Controller Stand

Simple and clean looking Xbox Controller Stand fits 8x3mm anti slip rubber pads (optional) Commercial license Do you want to sell prints of this model? You can purchase commercial licensing for this model by joining the Commercial license…

Downloads
65,398
Likes
13,911
Rating
4.97
P
PrintablesManabun Lab

Minimalistic Nintendo Switch Pro Controller Stand

I remixed agepbiz’s XBOX Controller Stand because it was amazing, while respecting the design to make it suitable for a Nintendo Switch Pro Controller. The remix source is here.…

Downloads
7,796
Likes
1,439
Rating
4.92
P
PrintablesWan

Realistic Skull Planter/Pen Holder

Try the new and improved V2 here! This skull planter/pen holder comes in a solid version, and one with drainage holes for plants! I know you overwater them, I drowned a cactus once. You're very welcome. There is now a new jawless model,…

Downloads
6,223
Likes
1,495
Rating
5
P
PrintablesDrJones

minimalistic trophy (vase mode) and base with hidden compartment

I recently needed some small trophies for different categories, so I came up with these. They are small and need only ~4g of filament (plus 5g for the simple base). Scale as needed, but I doubt it's well suited for much bigger size… (I…

Downloads
5,394
Likes
1,591
Rating
4.93
P
PrintablesArtificalSUN

QIDI Q2 minimalistic purge/waste bin (poop box)

Simple and easy to print filament waste bin for QIDI Q2. Unlike most other models does not require any additional hardware (magnets, screws, adapters, etc.) to mount. The hook/latch design relibly holds the bin in place while still being…

Downloads
4,390
Likes
274
Rating
5
P
PrintablesIan

Realistic fully 3D printable pocket knife

Update 25/2/2024: Fixed knife blade point. I had noticed that there were not a lot of realistic pocket knife options out there, so I ended up CADing one. It turned out better than I had anticipated. It comes with a locking mechanism and…

Downloads
3,942
Likes
397
Rating
4.71
P
PrintablesFlexiMania

Flexi Spider - articulated flexi realistic spider

This articulated spider was created for easy printing, strong joints and satisfying motion straight off the build plate. 🔹 Features Fully articulated flexi spider Smooth leg movement with flexible joints Print-in-place, one-piece model…

Downloads
3,668
Likes
654
Rating
4.7
P
PrintablesTom Vít

Realistic tyres/wheels for LEGO 10330 McLaren Senna Formula 1 car

The brand new McLaren MP4/4, piloted by the famous Ayrton Senna, is very good except for one crucial detail: the ratio of front to rear tyres does not match reality at all and can distract a bit. Yet all you have to do is print the tyres…

Downloads
3,426
Likes
277
Rating
4.94
P
PrintablesPocahontas

Realistic Benchy

Benchy for the real world Recommend print with my profile! You can print in PLA, PETG, ABS. Support Free Enjoy

Downloads
2,901
Likes
257
Rating
5
P
Printables3d tisk - Sam

Very realistic Predator bust

A very realistic and highly detailed bust of the Predator , inspired by the legendary extraterrestrial hunter from the classic sci-fi franchise. This striking 3D model captures the fearsome intensity of the character, featuring its…

Downloads
2,860
Likes
424
Rating
4.67
P
Printablesniletaner

The Glide | Minimalistic Functional Glider

This is the final iteration of my lightweight 3D printable glider, developed and optimized after beta phase. During the beta stage, I tested balance and tail geometry. Based on "flight trials", the rear section (tail assembly) has been…

Downloads
2,782
Likes
379
Rating
4.5
P
PrintablesOlle3D
18+

The source marked this model as adult content.

Downloads
2,487
Likes
228
Rating
3
P
PrintablesKAPPA3D

Glow-in-the-dark realistic moon

Print the model with glow-in-the-dark PLA. To obtain a better contrast, the first 0.2 mm were printed with black PLA.

Downloads
2,475
Likes
263
Rating
4.93
P
PrintablesUncleFrankSays

UFS-138 Eiffel Tower - More Realistic Improved for Printing

New improved version for 2026. It is broken into three parts. https://www.printables.com/model/1622682-ufs-170-ultimate-most-accurate-eiffel-tower-for-it Please send me your feedback. Thanks. I visited France this year and I was in Paris…

Downloads
2,386
Likes
86
Rating
5
P
PrintablesRiffnshred

Skadis Minimalistic Xbox Controller Stand

Desk space is premium real estate. Hang it instead !!! I did not need support but your mileage may vary. Uses the T-Clip system. The default one might not fit all Skadis board, but the Fusion 360 file is available here:…

Downloads
2,330
Likes
375
Rating
4.93
P
Printablescl@ytr0n

Realistic RED WASP Deterrent

Red wasps are very territorial… Anyone that's been stung by one knows that (ask me how I know)! But that doesn't mean you have to give up your territory for them! Preventing them can be as easy as creating a false nest! 🤯 Place these…

Downloads
2,243
Likes
579
Rating
5
P
PrintablesBondFire

Realistic horse

Realistic horse Commercial Membership – all my models with a commercial license: https://www.patreon.com/c/BondFire

Downloads
2,185
Likes
336
Rating
5

Realistic Crab

Prints on his butt to make the legs stronger and minimize supports. Very realistic in the right colors! Tree Supports on build plate only Partially Powered by image-to-3D from MakerWorld (https://makerworld.com/makerlab/imageTo3d)

Downloads
2,130
Likes
322
Rating
4.22
P
PrintablesTriform Designs
18+

The source marked this model as adult content.

Downloads
2,119
Likes
434
Rating
5
P
PrintablesSpeed

Skull Helmet Stand (Ballistic/Bump/NVG/NODs, etc.)

Remix of: https://www.thingiverse.com/thing:6341148 and https://www.thingiverse.com/thing:2596157 I have used a different skull that is simpler to print and much faster to print (half time for my settings). I used PLA-CF which came out…

Downloads
2,075
Likes
334
Rating
5
P
PrintablesBamBam Design

Realistic Octopus

Old Treasure: Mixed with Meshmixer 2019 from “Cute Mini Octopus” & “More Realistic Ball-Joint Articulated Octopus” Thanks to McGybeer & Stanos Happy Printing 😉👍

Downloads
2,055
Likes
177
Rating
5

Working Mini V6 60° Engine - Built Realistically

The model is 54mm long, 40mm wide and 38mm tall, using 31g of filament. Feel free to scale it up, but I did not test the fittings on a bigger model, so there might be some mistakes. You have to realistically assembly the bottom end of the…

Downloads
1,918
Likes
469
Rating
0
P
PrintablesCDisplay

realistic skull mask

For better printing you can split it, like i did (check photo's)

Downloads
1,915
Likes
731
Rating
5

Realistic Frog

Flat bottom and feet for EZ Printing! Scale to the size you need! Check out the whole collection! Tree Supports on build plate only Partially Powered by image-to-3D from MakerWorld (https://makerworld.com/makerlab/imageTo3d)

Downloads
1,895
Likes
257
Rating
4.92
P
PrintablesRustyFuzzdoor

Iron man(Realistic EASY)

super easy and amazing looking print

Downloads
1,888
Likes
257
Rating
5
P
PrintablesMici

DUMMY 13 - v2 - Way too realistic high-heel-booties (2 variants)

Based on DUMMY 13 Beta - Oct. 2023 DUMMY 13 Printable Jointed Figure © 2023 by Lucky 13 Toys is licensed under CC BY 4.0 Both variants are usable with the original parts (toe, ankle). They are impractical DUMMY may not be able to stand…

Downloads
1,758
Likes
393
Rating
5
P
PrintablesLeo_Careca

Realistic Hand

Only a realistiic hand.

Downloads
1,755
Likes
167
Rating
5
P
PrintablesFlameKitty

Realistic Poodle Model

This is a cute model of a poodle that is easy to print. it is super realistic. How to print: To make this model more realistic you need to use a fuzzy skin, here are the fuzzy skin parameters: Fuzzy skin: Outside walls only Fuzzy skin…

Downloads
1,736
Likes
125
Rating
4.89
P
PrintablesJonas

Modern and minimalistic table lamp

I designed a modern and minimalistic 3d printable table lamp. Printable parts This is a multipart print. The lamp consists of 4 parts: lamp shade (shade.stl) top lid for the base (base-top-lid.stl) base (base.stl) bottom lid for the base…

Downloads
1,715
Likes
411
Rating
4.86
P
PrintablesMrMesh

Honeycomb (HSW) Hook Minimalistic

These are some minimalistic hooks to use on the honeycomb storage wall. I designed 4 different variants with different thickness and length. You can use the empty insert to attach them to the wall. Please check out my other hooks for your…

Downloads
1,698
Likes
203
Rating
4.75
P
PrintablesBillie Ruben

Realistic 3D Printed Feathers

These are here for you to make fantasy feathers! of any colour, texture, size, etc and they will look quite realistic. I think they would be cool on great big hats, giant cosplay wings! Or costumes and capelettes or creature puppets!…

Downloads
1,673
Likes
402
Rating
4.44
P
PrintablesYngwieR

Minimalistic Xbox Controller Stand with Logo

Simple and clean looking Xbox Controller Stand. Fits 8x3mm anti slip rubber pads (optional) Printsett 0,1-0,2mm layer height

Downloads
1,623
Likes
144
Rating
5
P
PrintablesMeister Edel

Minimalistic & smooth Corner Bracket

Heyho For a small project I did need some minimalistic brackets! Since I didn't particularly like most of the versions already available online, I quickly constructed a few myself and ended up installing this ones. After that Project I…

Downloads
1,592
Likes
1,670
Rating
4.93
P
PrintablesDeltaprints

Minimalistically Designed Bear Sculpture

A great, minimalist interpretation of a bear. It appears strong, thoughtful, perhaps even pensive? This sculpture gives the bear a very special touch with its minimalist, curved lines. The standard dimensions are 200 mm x 151 mm x 97 mm…

Downloads
1,544
Likes
321
Rating
5
P
PrintablesLEN polygon

Minimalistic clothespin with 'snake-bite' grip

It's a medium sized clothespin, but as a single minimalistic part and print-in-place. It uses ‘snake-bite' style teeth to hold material together because it doesn't have any extra force pushing the clamp closed. The force is a little less…

Downloads
1,524
Likes
171
Rating
5
P
PrintablesVC Design

Wall Hook – Minimalistic

The design consists of two parts : BASE – mounted to the wall using a screw with a diameter of 4.5 mm INSERT – screws onto the BASE using an integrated thread, concealing the mounting screw while providing a larger contact area to better…

Downloads
1,486
Likes
664
Rating
4.83
P
Printablessthone

Realistic Handcuffs

This is a pair of realistic Handcuffs I designed off of a picture I found on the internet. They feature a button activated double lock. After activating the double lock turn the key in one direction to unlock the lock then the other…

Downloads
1,484
Likes
205
Rating
4.8
P
Printables4D

Minimalistic Nintendo Switch Pro Controller Stand - non-slip design

Manabun design is very accurate. I made quick remix for non-slip pads that I have at home. Dimensions 18 x 5 mm. Pads are very tight in holes. Print with 3 perimeters and 15 % lightning infill.

Downloads
1,465
Likes
116
Rating
5
P
PrintablesERAVIA

Crocodile Skull | Ultra Realistic

Print Instructions & Recommendations: Basic tree support is recommended for the current orientation. Both separated parts or the unified models can be printed with their current orientation with the following settings: Support Type: Tree…

Downloads
1,415
Likes
367
Rating
5
P
PrintablesJace1969

Paint Ball Ballistics Mask

This was a request originally on my To Do list that I've finally got around to completing. Thanks to Sinner for generating and providing the original .PDO I also need to get into a habbit of adding the name of the person whom requests a…

Downloads
1,402
Likes
377
Rating
4
P
PrintablesTomik s Cuprou

Minimalistic Xbox Controller Stand with Logo

XBOX Controller Stand This sleek and functional stand is designed to perfectly cradle your game controller, keeping your gaming area tidy and your controller readily accessible. Key Features Custom Fit: Precision-engineered to hold your…

Downloads
1,383
Likes
297
Rating
5
P
PrintablesRetron Print

Minimalistic Christmas Tree

A simple and elegant symbol of Christmas. The tree has been stripped of all unnecessary details while retaining its iconic character. The model comes in two versions: Solid monobloc. Just print and use. Three part assemble version.…

Downloads
1,372
Likes
350
Rating
4.8
P
PrintablesLH

Minimalistic Photo, Card Stand

Minimalistic picture stand in two sizes. Sizes Photo Stand - for standard 4 x 6 inches Photo Stand Small - small card size Print Layer height: 0.2mm Some infill Enjoy!

Downloads
1,370
Likes
168
Rating
4.87
P
PrintablesBeo666

Minimalistischer Clicker Klicker Fidget Fun

Weniger ist manschmal mehr, so auch in diesem Fall. Mein minimalistischer Klicker ist schnell und einfach gedruckt, es wird kein Support benötigt. Das einzige, was du brauchst, ist ein Keyboard Switch. Ohne Kleben wird alles…

Downloads
1,364
Likes
66
Rating
3
P
PrintablesFreestylez

Minimalistic Chess Set

I created this as a gift, so I thought I would share it here as well! Complete with individual piece cutouts in the drawer, an extra queen in each color, and magnets, this set is designed to be printed in any two colors, without the use…

Downloads
1,363
Likes
792
Rating
5
P
Printables3d tisk - Sam

Realistic bust of a Stormtrooper

A detailed and realistic Stormtrooper bust , designed for fans of the Star Wars universe . With accurate proportions and elements inspired by the movie screen , this model brings a piece of the Empire right to your shelf or desk . Great…

Downloads
1,281
Likes
320
Rating
5
P
Printables7h3 0n3

Minimalistic Elephant Sculpture

Just a minimalistic sculpture of an elephant. It was created as a gift. Prints without support. If you want some safety you can add a brim.

Downloads
1,279
Likes
244
Rating
5
P
PrintablesArioch77

HSW Xbox ONE controller minimalistic

Made a remix of some popular prints to meet my need to store my controllers on HSW. By no mean I design these, juste cut ( to make it work, and make it smaller ) and fusion two items together to work … Made a remix of…

Downloads
1,269
Likes
187
Rating
4.91
P
PrintablesTheHypaaa

ProjectF204: Formula 1 RC car with realistic suspension

Inspired by Daniel Norée's openrc F1 project I wanted to build a remote controlled Formula 1 car of my own design and fixing the ‘flaws’ of his car. I wanted my car to have a fully independent suspension utilising pushrods and not just…

Downloads
1,266
Likes
215
Rating
5
P
PrintablesDaniel Playle

Shopping cart trolley token coin UK (realistic pound shape)

Pound coin shaped trolley token. The faces around the edge of the token are slightly curved for a realistic fit (real pound coins are not perfect dodecagons!) The tokens are available in either one or two tone models. If you only want to…

Downloads
1,253
Likes
60
Rating
4.92
P
Printables3d tisk - Sam

Realistic Deadpool bust

A detailed and realistic bust of Deadpool , designed for fans of Marvel’s most unpredictable antihero. This model captures the essence of Deadpool’s iconic look – from his textured mask and tactical suit to the confident posture and…

Downloads
1,238
Likes
246
Rating
5
P
Printablescdc

Realistic Cherry

This model has a really small contact area with the plate (assuming it is printed upward, as it is the default in the .stl file) so I strongly recommend either cutting off ~0.5mm from the bottom or using a raft. I also recommend using a…

Downloads
1,235
Likes
87
Rating
4.8
P
PrintablesApolitosz

Realistic denture model with a print-in-place hinge

Added a hinge compared to the original mode. Mesh modification is not my strongest capability, but did my best to eyeball the upper and lower jaw model's position compared to each other, added a hinge, then rotated the upper jaw along the…

Downloads
1,224
Likes
283
Rating
5
P
PrintablesXeno

G26 - BLUE GUN / PROP / MORE REALISTIC

Try the remixed part by: Balconio https://www.thingiverse.com/thing:6508688 Regards Michael from Poland Have a nice day Print Settings Printer brand: Artillery Printer: Artillery Sidewinder X2 Rafts: Yes Supports: Yes Resolution: i used…

Downloads
1,184
Likes
102
Rating
4
P
PrintablesLush

Minimalistic Motorized Roller Blinds - NEMA 17 stepper motor gear and mount

Minimalistic Motorized Roller Blinds via esphome and homeassistant. To automate your roller blinds for: open blinds slowly and noiseless when waking up, coupled to your alarm clock close blinds on hot summer days control blinds if you are…

Downloads
1,135
Likes
383
Rating
4.5
P
PrintablesDBarwikowski

Minimalistic ironing test

Please consider Liking this model :) Ironing test Each rectangle has different ironing settings. Pick the one that suits you the best :) Originally designed for my SV08 but you should be able to adjust it to your printer

Downloads
1,123
Likes
49
Rating
5
P
Printablesdajanka.3d

Minimalistic Rabbit

Can be printed without infill and supports

Downloads
1,121
Likes
220
Rating
4.83