360 models
Summary Are you tired of searching your clips for your airtight Samla box once opened? You like the simplicity of print-in-place parts? Then this Samla clip is for you. The only thing you need are some drops of glue to fix the clips.…
Motivation I've got several requests to adapt my design of the clip for the larger 45/65l boxes ( Never lost Ikea Samla Clip (45l + 65l) ) to the smaller boxes 5l/11l/22l. So far I didn't use the smaller boxes as dry boxes and until…
I see that you like The binding of Isaac! Great! I made this keychain of the game character called Lost. Ready to be printed in three colours. I used white for the base, then change to blue, and lastly black for the outlines. If you…
This is the perfect way to save your child from getting lost in crowdy places! Adapt the whistle to your needs, choose your Filament, print it out ( 0.2mm layer height! No MMU required ), print the "necklace safety connector" ( 0.3mm…
Thanks a lot for to Canislupus for the original design and Slaig for the remix with the Fusion 360 files. I needed this clip for 130l box so here is my remix for the last two sizes of Samla boxes. If i understand the Ikea sizings…
Chachapoyan Fertility Idol aka Golden Idol from the Indian Jones movie Raiders of the Lost Ark (1981). Using Fusion 360 I was able to reduce the mesh by 75% without losing too much quality. PolyLite Silk Gold: https://amzn.to/46fmrag 1:1…
Summary Another simple Clip for your 22l Samla Box with or without sealing. Just a satisfying “Click” and closed. Use a strip of double-sided adhesive tape (showcase on the pictures) and you are done with searching your Samla Clips. I…
I needed this great design from Canislupus for a 22l samla box, so I recreate a clean fusion 360 file based on his v1 for sharing and allowing easy further modifications. Two models are proposed 11-22l samla box clip v1 Tested with 11l…
It belongs in a museum! Or in your office. Or maybe the mantle. Who knows?! It's entirely up to you where to display (or store) the Ark of the Covenant. Hopefully, if you're taking the time to print this out, you're not considering…
Replacement Coins and Compass models to go with the other lovely 3D resource tokens in Lost Ruins of Arnak. Coins are double sided and can be printed in a single colour (gold or copper). Compass are designed to be 4 colour using layer…
Spring is coming, just a reminder not to lose your 10mm socket while working on your car! This is an oversized 10mm socket 3/8 inch drive - big enough not to lose it anymore and also a lovely prop or toolholder for your garage. Inner…
Finally finished my insert for Lost Ruins of Arnak by CGE, plus BOTH expansions. It was a tight fit - might be too tight for some boxes, and there are a couple of bits I'd have liked to do better (the deck boxes were a real compromise in…
This is an organizer for the boardgame Lost Ruins of Arnak and it's expansion Expedition Leaders. It is a remix of my base game organizer and most of the components can be reused. If you already printed the base game version you only need…
You need to print this cube:- at 0.2mm layer height on a 0.4mm nozzle (or smaller) with 0.4-0.46 line width out of a non-silk material (silk expands when it comes out of the nozzle!) The screw and rod parts snap off to test in the screw…
Ever had a dream about a guitar but didn't want to spend thousands of dollars? Like to tinker and build? Here's a fun project for ya. Printed in PLA on a slightly modified Ender 3 V2 with a 1mm nozzle. The design is based on a 1959 Les…
The Regular Faction box needs to be printed 4 times. Factions that have additional items have a special place for them in the boxes If you like my work, please consider making a paypal payment: https://paypal.me/visar78
Robot from the TV show Lost In Space.The model was sliced up into separate parts to make it easy to print with most FFF/FDM hobby 3DPrinters. The file was derived from the file uploaded by cerberus333. It was chopped up and repaired using…
If you want, you can help me with designing inserts by donating here: https://www.paypal.com/donate/?hosted_button_id=J2YS7MREH8MU8 Hello, for those that don't know my ‘insert philosophy’ - I am creating modular inserts that are focused…
This is an organizer for the boardgame Lost Ruins of Arnak. It supports sleeved cards and vertical storage. Most of the boxes can go straight onto the gameboard to reduce setup time! Here's what you need to print: 4x Player - Holds cards…
This is a model of Lostvayne, the sacred treasure of Meliodas in the manga and anime of The Seven Deadly Sins. This was designed for to fit in the hand of the Meliodas figma action figure. Print instructions Category: Toy & Game Accessories
This is the ship used by the families in lost in space when heading to the colonies and becomes their home. With proper orientation on your build plate all the parts should print without supports. Change Log - Levitating: I purchased a…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
I designed this as a replacement for the lame cardboard start player marker in Lost Ruins of Arnak. For my Moon Staff upgrade, see https://www.printables.com/model/374337 . It's a multi-part model, none requires supports. You can also get…
CZ: Není můj design! Jediná úprava je moje a to “Player_Board_A”, kde jsem zvětšil díru na karty a odebral tamtéž spodní zábranu, aby se karty dali lehce vytahovat a vešli se dovnitř ve fólii EN: Not my design! I've remixed only the tile…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
I decided to make some replacement panels for my Centaurus M100 to give it some character. I made a blank and some customized panels. Feel free to remix it with any design you want. The cutout with the design should be 0.4mm deep if it…
I bought a sticker set for Lost Ruins of Arnak and only then I realized that there are 6 sticker sets for each expansion character but there are only 4 set of meeples. With this you can print extra meeples so all stickers can be used!…
The Ulysses from the Disney Movie Atlantis: The Lost Empire. Printed on my Longer LK5 Pro with raft and tree supports. Available to print as a whole or as two parts. My favorite movie growing up, I just had to have myself a model of the…
This is the mokoko pet from lost ark made to be able to sit on top of your screen like a little buddy! there are 3 versions, vanilla, santa hat, and a beanie, with 4 different variants of the beanie mokoko. As well as 4 variants of…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
I did not like the base meeples and research tokens. Please feel free to use them. Each meeple, I like to call them meepologist, comes in two parts, hat and body. Makes printing easy. The research tokens I also print in two sections, a…
The moon staff needs to be printed with supports and the 2 pieces glued together. Removing the supports was a bit of a pain. Use blue for the base game staff and red for the Expedition expansion staff. Pictured is Prusament Azul Blue PLA…
Ryankinnaman's very thematic resource trays look great on the game board. This is a super simple resizing to make them fit into Fabmaszter's excellent organizer. If you like what I'm doing… … consider buying me a coffee or joining my Club .
The lost Lament Configuration Dice/Box
This is a remix of @Fabmaszter great box insert. Only the files that I changed are here, the rest are at the post made by @Fabmaszter which is linked directly below.…
This is a bookmark I made of the Lodestar Initiative from the book series, Keeper of the Lost Cities. I've made two variants, one without the backplate. This one while looking batter, is harder to clean up. and one with the backplate.…
Projekt samostatného dělostřeleckého srubu nahrazující dělostřelecké tvrze. Do podzimu 1938 se nepodařilo zahájit stavbu ani jednoho objektu. III. třída odolnosti výzbroj: 3x Y, 1x L1, 3x N, 2x ZN osádka: 121 mužů model 1/200
Dělostřelecká tvrz Hůrka Jedna z pěti stavebně nejdokončenějších tvrzí ČS. opevnění, dnes muzeum u města Králíky v Pardubickém kraji. Sestávala z 5 povrchových objektů propojených kilometry podzemních chodeb a sálů, do sestavy tvrze patří…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
Love the show LOST and decided to make some coasters. Designed myself with logos from the Lost Wiki and Tinkercad, definitely not done professionally. This set includes the Dharma Logo coaster and the following 10 stations: The Arrow The…
Funny Sign - "I may not have lost all my marbles yet, but there is definitely a small hole in the bag somewhere" - multi colour print, printed in ZIRO PLA Glitter Twinkling Red and Sunlu Matte white PLA. For more funny signs see my…
The “Connection Lost” message from RuneScape. To match the in-game appearance, start with black filament and switch to white when letters begin to print. Beware of scaling down, because I got poor results slicing with Cura 5.1 on the…
Printed on my LONGER LK5 Pro with raft and tree supports. I assembled the fins with hot glue and then left to cool. Blender 3.1 Eevee render
This is my insert for the Lost Ruins of Arnak board game. It fits the following expansions: Lost Ruins of Arnak: Expedition Leaders Lost Ruins of Arnak: The Missing Expedition Lost Ruins of Arnak: Solo Mini Expansions (PnP) Lost Ruins of…
These were inspired by the tokens from MeepleSource, but were modeled from scratch by me. I recommend CA glue to assemble the compasses.
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
Lost Ruins of Arnak is a fun game but I have no clue why half of the game materials are amazing (arrows, jewels, tablets) and the other half is trash. Thanks to Virral for his great replacements for the cheap resource card board tokens .…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
This is a resource organizer for the game Lost Ruins of Arnak. I printed various bits of the organizer from Unserfamily and the remix by Casshern_1776 , but I wanted a single resource holder for all the bits. I tried my hand at making it…
I wanted something to hold my Lost Mary vapes, so designed this. It holds 5 fairly snugly, and has holes at the bottom (so you can puff away while the vapes are still in the holder if you wanted to for whatever reason). Quite a niche…
Visar78 did an excellent job with the organizer for the Gaia Project! However, editions around the world can present differences, and this was the case with the Brazilian edition from publisher Grok, whose tiles for the "The Lost Fleet"…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
Replacement battery cover for the lost vape thelema q200
Simple Silhouette of a Hyundai Veloster N. It is 2mm thick. I recommend sizing in only X & Y for your printer and double checking your slicer preview to make sure all lines will print. You may need to turn on “print thin walls” setting on…
Sub Pod Model from the movie Atlantis: The Lost Empire. Growing up Atlantis was my favorite Disney movie and I credit it for sparking all my creativity at a young age. I had started this model a year ago but only a few weeks ago did I try…
The original artwork was in bad shape, so it was painstakingly restored to allow the creation of a detailed lithophane. There is a version for both FDM and Resin printers The stl is very detailed and might take a while to slice on older…
This stand will fit for Lost Vape Nano Pro Ursa. Keep your vape pen from falling over when you set it down.
No supports, brim or raft. 0.2 mm layer height. The best result is expected if TPU/ elastan filament used. Support creator here: PayPal me :) Patreon
Print 2 each of the Player Decks and Player Tray files. Player Trays are stacked 3 on top of 3 with the cutouts on each row designed to hold 3 of the character boards. The “backfill” pieces serve to fill the remaining space and have a…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
Use TPU. The part presses on to the pump and snaps into the mattress like the OEM pump.
You'd better get yourself a garlic T-shirt, buddy, or it's your funeral . 8x3mm magnet to be glued in. Example print used 15% infill. 8/2023 - Redesigned this model, as it needed some fixing. Turned out fantastic with a layer color…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
This is a cover for the temple tile tray posted by Biofarmar for the board game Lost Ruins of Arnak. The cover fits snugly into the tile slots so that the tray can also double as the storage container when put away in the box. The side…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
This fun sign was suggested to me by a platform user, HudsonBear_457653, who wanted to have a fun sign that speaks to hiking lovers. For those of you that don't have a multicolor printer, my advise is too look, in your slicer, when starts…
Designed and printed this adapter to fit the air mattress from Lost Horizon for the Tesla Model Y. The inlet/outlet on the mattress is bigger than conventional adapters and I couldn't find one online. Should fit the mattress snug so it…
This is a simple insert for The Lost Expedition that holds the GeekUp Bits from the Boardgamegeek store and multiple expansions. It features three trays. One holds the card decks unsleeved, including the base game, the Fountain of Youth…
Pretty much it. Check the original model for individual parts. Enjoy! Follow me if you like these types of models :)
Visar78's Gaia Project insert is fantastic, from a design perspective. But it leaves a little to be desired when actually printing it out and using it. First off, the faction boxes are brilliant - but they require support trees to print…
Print at 10X scale of file for palm sized figure. Mirror both parts to get full model requires supports for all. for horns add raft also. faces only need supports this is set of all figures from Prusa printers by DiPT…
This is a “Lost Marble” style marble maze based off of an old wooden toy I had as a kid. I have this designed for use of a run of the mill glass marble that I had lying around. It measures 15.5mm in diameter. I have included the Fusion…
This Is a remix from Sare93's great clearing markers - this one has three suit spots for the lost city landmark mini-expansion pack. Suits provided were made by Sare93 When I printed the main markers, I did x&9 at 90% and z at 70% to make…
I designed this as a replacement for the lame cardboard moon staff token in Lost Ruins of Arnak. For my Start Player Marker (aka Clock) upgrade, see https://www.printables.com/model/374320 . Printing and Assembly This staff is made of two…
Split-flaps where the odd numbers have been replaced with hieroglyphics from the tv series LOST. Use with: https://www.prusaprinters.org/prints/69603-split-flap-counter-fully-printable Note: The numbers/hieroglyphics have been cut 0.4mm…
A simple solution for the Lost Vape Hyperion crappy fire button. You need to open the front part whit a screwdriver, trash the broken button, put the new one whitout use any kind of glue and close the front part.
Here is a remix of Taylor Chien's rowboat to fit the story Lost and Found by Oliver Jeffries. Here is a link to the story: https://www.oliverjeffers.com/lost-and-found I made this to go with two peg dolls my wife painted to use in her…
It is a part that remodels Kyosho's mini-z 4x4 into a Netflix version lost in space chariot with a 3D printer. Feel free to support me at: https://buymeacoffee.com/andcraft3d For assembly, please refer to the stl data and video in…
Eine einfache Halterung für Lost Vape Thelema Akkuträger mit Halterung für zwei 18650 Akkus. Sollte in jeden Becherhalter im Auto passen. Habe eine etwas kleinere Version hinzugefügt (ohne Akku-Halter) für kleinere Halter. A simple holder…
This is a removable chassis I designed for the KR sabers Lost Acolyte. Parts I used: 28 MM Smugglers Outpost Speaker Proffieboard V2.2 Keepower protect 18650 Small pixel accent ring There is a small cover for the accent ring that I had to…
Simple insert to organize the box for The Search for Lost Species. The timing tokens can be left in the boat and covered with the BoatCover, which friction fits quite well. Print one of everything except for 4 of the player boxes. I laser…
Grimm's Fairy Tales - Hansel & Gretel Lost in the Woods 3D printable model.
These are some prattle pins from the book series Keeper of the Lost Cites. I got the photos that I turned into relief sculpture here . Powered by Relief Sculpture Maker from MakerWorld (https://makerworld.com/makerlab/…
Lost Souls Bas Relief. Two Versions. This is the happy accident that occurred when I failed to change the default denoising strength in image2image while using stable diffusion to clean up a low resolution uv map in a decorated archway…
This dog collar looks like it is etched in the bone and held up by a tube with a if lost number on the back. Tip: Move the bone face down on the name and should be printed with supports
A clockface based on the logo of Nintendo and Camelots "Golden Sun - The Lost Age". It has an outer diameter of ~180mm and fits an axis of ~8mm. Depending on how long your axis is, a small washer nut may be necessary to hold it in place.…
Iconic Movie Props - Raiders of the Lost Ark - The Golden Idol - 1981
Lost Teotihuacán Jade Mask The greenstone masks of ancient Teotihuacán, carved from prized materials like jadeite and serpentinite, feature an idealized, stoic face that was often originally detailed with striking shell and pyrite inlays.…
A remix of the ntalekt's "Indiana Jones - Chachapoyan Fertility Idol" model that can now double as a piggy bank.
Did you break or lose the hanging cord when you last decorated the Christmas tree? - No problem with the clips - Easy to decorate and remove. Just print in green PLA or PETG. The original scale size is about 42mm overall length, clamping…
Lost in Space (1965) Models from Season 1 Episode "The Sky Pirate" A.P. Tuckers Spaceship
To apply this update, you must first perform the following "Lost in Space Chariot /MINI-Z 4x4 Body". https://www.printables.com/model/794624-lost-in-space-chariot-mini-z-4x4-body Also, please enjoy remodeling such as SCX24 and FCX24 of…
There are some great box organizers and ornate card holders out there for Arnak. I was just wanting something simple to keep the cards organized in the box and while out on the board. The holder is sized to hold sleeved cards and, if you…
If you like the well known boardgame THE LOST RUINS OF ARNAK you might prefer a nice little dovetail box for your players stuff, too. The box has 2 compartment. One for the basic deck cards and one for the other player stuff. We printed 4…
Figura de accion femenino perteneciente a la banda de moteros THE LOST. Female action figure belonging to the biker gang THE LOST
Iconic Movie Posters - Raiders of the Lost Ark - 1981
![[Adapter] FlexTail Pump - Lost Horizon Tesla Model Y Mattress](https://media.printables.com/media/prints/928357/images/7079070_33cfa0ae-1349-445e-aef7-933fab397186_b4feec94-ef9e-45f3-8aa5-762babf8043d/pxl_20240615_121521394mp.jpg)
