Small Whistle: extremely loud
Small whistle for keychain, backpacks and other daily or safety equipment.
- Downloads
- 15,523
- Likes
- 2,803
- Rating
- 4.91
1,203 models
Small whistle for keychain, backpacks and other daily or safety equipment.
Intro XXXS super-mini emergency whistle for your keyring! Only 32mm in size. Only 4min print time. SMALL but LOUD! Print a few of them and give them to your friends as emergency whistle. Why you'll love it? Very small - only 32mm Quick…
EXTREMLY LOUD WHISTLE Should you encounter issues with filament strings, this whistle may prove ineffective, as it involves numerous retractions. I suggest verifying your slicer configurations. You might consider reducing the printing…
To be able to pump up the CloudCuddle bed for on the go, a special adapter for the air pump is needed, which is not supplied with the tent or pump anymore. This connector solves the need to buy it seperately with shipping costs, etc.…
TWO SIZES NOW INCLUDED. Drink holder + phone stand + remote holder for any large/wide sectional or couch armrest or back of the couch. The non-remote side is easily narrow enough to go between your sofa and the wall). I know that it fits…
Easy to make a cute Clouds and Rainbow keychain I printed in PLA Infill: 15% Layer Height: 0.20mm Supports: No If you like my work consider Buy me a coffee 😊
The lamp cover dims and shades the white light of the Ikea UPPLYST cloud lamp. It's designed to snap onto the mounting plate. The LEDs have 1-2cm distance to the cover to prevent it from getting hot. When mounting the lamp to the wall,…
OnShape model: https://cad.onshape.com/documents/e575f295105d8e9e32a6bc56/w/313938088c26a895e167df17/e/4262aab72ff56fb5d56f9058
This is V2 with 20mm Mounting Hole Distance for the new Cloudray K40 Laser Head with FL 25.4mm and FL 50,8 mm. It fits to my K40 Laser X Axis Carriage Base. K40 Laser X Axis Carriage Base von EinfachUli | Kostenloses STL-Modell…
The set consists of a wall mount and a rotating mounting plate for attaching a PreSonus Eris 3.5 Gen 2 loudspeaker. The mounting plate is designed to use as little material as possible while still ensuring that the loudspeaker is securely…
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 162.28x200mm in size You may print at higher layer heights below the Min Depth of 0.48mm The Max Depth is 2.2mm and the Actual Depth is 2.2mm…
Wall art: Dragon in the clouds (four colours)
Introduction: Electronic waste (e-waste) is a huge global problem, posing troubling environmental threats. Waste mobile phones are a big part of e-waste, mainly due to extreme demand & short product life-cycles. While older smartphone…
Use PLA. 3pcs horisontal walls.
News 2024-03-17: My newest whistle design, a Long Range Dog Whistle at 7,000 Hz . Please download here . News 2024-01-21: I designed an ultrasonic dog whistle with an even higher pitch of 23 kHz , which you can download here . Update…
News 2024-03-17: My newest whistle design, a Long Range Dog Whistle at 7,000 Hz . Please download here . News 2024-01-21: I designed an ultrasonic dog whistle with an even higher pitch of 23 kHz , which you can download here . Update…
Introducing the smallest and most powerful whistle! Print it out and annoy your friends and neighbors!
This Mini Whistle – Extremely Loud (115dB) – 1.5g Edition is a slightly larger, sturdier version of the original mini whistle, still small enough to disappear on a keyring. Weighing in at 1.5 grams , it prints quickly and comes off the…
Rock-Solid and lightweight emergency whistle. Two chamber design. Painful loud. Print Settings Printer: Anycubic I3 Mega Rafts: No Supports: No Resolution: 0.2 mm Infill: 20% Notes: Print on its side (as it is in the stl-file) without…
This whistle is up to 120 db
My hand cranked turbine blower is cool and works fine - however you have to crank it really fast for a nice blow. So i tried to add another planetary gearbox - and it works so much better (and unfortunately louder). All parts are 3d…
simple, but loud two tone keychain. due to about 4kHz + 4,75kHz combination extremly noticable and loud. no supports needed. prints ~3 minutes, and uses ~1g of filament. (i achieved ideally 1g with 10% infill and ASA) Print as many as you…
News 2024-03-17: My newest whistle design, a Long Range Dog Whistle at 7,000 Hz . Please download here . News 2024-01-21: I designed an ultrasonic dog whistle with an even higher pitch of 23 kHz , which you can download here . Update…
Cutie Cloud Jumper Dragon Flexi-Fit (Special Articulated) Model With Multiple Choice Of Wing Designs Based on the dragon cloud jumper from the movie ‘how to train your dragon 2’ - Built with articulated links using my self designed…
Here is my design of a happy cloud lamp - the cute little light for your toddler! The lamp will cast a shadow of the stars to the ceiling (see pictures). You won't need anything but an LED strip as additional hardware for this lamp, also…
Since i was a little bit disappointet of the relatively low noise level of the original V29 whistle, i had to improve it. This whistle has larger cavities and therefore a lower pitch. The interval between the two tones is larger and more…
This is a model of Final Fantasy 7 Cloud Strife in simple polygon form. When I printed it I scaled the model to 15%. Some of the additional files I attached have already been scaled to match that 15%. This also includes: Buster Sword (to…
It is not easy to find to buy a good Emergency Whistle for Outdoor Survival so I made my own Extremely Powerful Whistle ! You can use for your safety to scare animals or in case of emergency, have an awesome adventure and leave no trace.…
Printed with PLA, without support. Z=0,3 20% infill Add peace of plastic bag. The best one is tiny bag in which Prusa send parts. You can add endless multipart to the BloWer main and get deeper voice. You can remove and add parts and get…
Intro This keyring whistle is small but loud. Print a few of them and give it to your friends as emergency whistle. Why you'll love it? Small, ideal size for your keyring Really loud for its size A good gift for your friends - and…
He may be a baby, but don't be fooled, he's pretty big. This design is easy to print in any material, 100 percent print in place with no assembly - Almost entirely rebuilt from a past design of mine. (Commercial licence is only for…
The bracket of my HyperX Cloud 2 headset broke, so I modeled and printed a new one.
A revised version of the whistle that I designed to be compact, fast-and-easy to print, and super loud . Good for sports and hiking, survival etc. Compact and handy, just 20 x 53 x 10 mm in size. The two chambers of slightly different…
Updates^ added enlarged cylinder inside gear, with guide added reinforced connector, instead
LOUD duck call. 60db will attract ducks from far away. Don't pay over 100$ for a call. Minimal sanding. Tight fit and compact pocket size. Good for any and all ages.
this whistle contanis major improvements compared to my V29.1 whistle. please be careful and use it responsibly. The whistle responds very easily due to an improved labium. It provides lesser air consumption aswell I built in reflectors…
Want to access even more models not found here in Prusa Printers? Interested in supporting my efforts making free models for the world to enjoy? Check out my patreon page here: https://www.patreon.com/mz4250 Patrons have access to all my…
I printed it with 1.6mm shell thickness and 10% infill. The holes for wall mounting are 350mm from each other. For bigger printers with 400x400mm print beds I uploaded a single piece model and a slim version. UPDATE The slim version can…
The Cloud Gateway Max gets hot! Do not print in PLA!
Very loud whistle!! Print in place. I wouldn't recommend PLA if it will sit in a hot car. This should work right off the printer, if not you can use needle files to sharpen the blade that splits the air to make it louder.
Fast and easy print! Printed with nozzle 0.4 / layer 0.2 - no supports Absolutely minimal construction to turn the large horn available with the Portable Air Horn into a very loud siren whistle. Simple assembly and disassembly. See video…
Light up your room with a bang! This striking 3D printed mushroom cloud captures the iconic explosion shape, designed to sit perfectly over a standard LED tea light. Whether you're into science, statement décor, or just cool night lights,…
The only thing worse that the subscription model, are overpriced accessories that should have been included! I made this for myself, as I will only use it with a 2280. So, if you're are only going to use a 2280 too, have at it. Includes a…
He’s definitely going to need supports, and I also recommend scaling him up nice and big before slicing if you want stability and the fine details. Have fun with this, and if you want to see more, give a like and follow me. If you have…
cloud box modular and with optional magnets to lock into position this is a modular design that consists of: base (use of 4mmx2mm magnets optional) main insert · 3 options secondary insert · optional pen holder (use of 4mmx2mm magnets…
The speaker enclosure has a volume of 4.5 liters and is tuned to 60 Hz. It features a triangular port design, eliminating the need for support structures during printing. Crossover: I designed my own crossover based on online…
cloud box modular and stackable through magnets check out companion model cloud organiser · modular this is a modular design that consists of the boxes themselves, lid, and as options you have feet and inserts. the stacking between the…
A set of cloud bath bomb molds with a flat bottom for adding embeds. Free to print for your own personal use! If you just want to buy this mold, I have it for sale here: https://chunkadust.com/products/cloud-bath-bomb-mold If you'd like…
Perfect fit for SKÅDIS mount for Ubiquiti Unifi Cloud Gateway Ultra. Does not block any I/O. Requires 2x Skadis T-Clip System - Low Profile Flush Mount Clips No support needed Printed with PLA with default setting
This is only my third 3D print. I made the adjustments using TinkerCAD. I used PETG filament and an Anycubic Kobra S1 printer.
Models are contained in two folders based on spacing Choc (18mm x 17mm) or Mx (19.05mm x 19.05mm) Dimensions Choc 1u: 17.5 mm x 16.5 mm 1.25u: 21.9 mm x 16.5 mm 1.5u: 26.5 mm x 16.5 mm 1.75u: 30.6 mm x 16.5 mm 2u: 35 mm x 16.5 mm 2.25u:…
cloud box · XL modular and stackable through magnets ~assembled dimensions in mm > x: 125 · y: 155 · z: 70 this is a modular design that consists of the boxes themselves, lid, and inserts as options. the stacking between the boxes and lid…
We are excited to introduce the new model for the Xbox Series X! As always, you do not need any support to print both parts. Installation on the console is straightforward and does not affect airflow. All buttons and slots are accessible.…
The "Geos" are edgy, literally 😎 We've combined the sugary sweetness of the FDM5 top-end with an accurate and punchy mid-section and bottom end. If you're into critical listening, or even mixing and mastering, the FDMGeos are for you! The…
Based on different existing models Can be printed without supports Uses 4 DIN 7991 M3-16 Screws and 4 M3 nuts
cloud pen holder with optional colour insert dimensions in mm > x: 93 · y: 83 · z: 91 photos show printed in easywood pla by FormFutura 0.20mm layer height 10% adaptive cubic infill notes colour insert is optional for a bit of contrast…
https://www.thingiverse.com/thing:2933021
Replace your old cracked PU armrests to with new memory foam Cloud Swap armrests. I used 12mm x 2mm magnets. They are press fit for me, but used some CA glue to keep them in place permenantly. Trim off the tabs on the perimeter used to…
Works great with my other panels :)
A 10" 1U rackmount for the UCG-Ultra with three keystone slots.
Ich habe die Flat Fhistle länger gemacht und die eine Kammer kleiner gemacht um zwei verschiedene Töne zu erzeugen.
This model was originally on Printables where the creator posted his .step file for editing. It's been mixed a few times but as the smaller Max and Ultra Unifi models. This is for the Unifi Cloud Gateway Fibe r unit. It's a wall mount…
This is a simple wall-mounted toilet paper roll holder. It is mounted on the wall with two screws but has also enough surface on the back to glue it to the wall. This holder supports up to three rolls of toilet paper with a diameter of…
A simple skin for Lucky 13 - Cloud Strife, Final Fantasy 7. Only three parts - his hair, shoulder guard and the buster sword. The hair I remixed from this model: https://www.thingiverse.com/thing:3393568 The hair is quite a complex piece…
it is largely based on Foden's design , which it also fits together with. I have also made a model for the Unifi Switch Ultra (USW-Ultra)
This is an air raid siren built to go inside a Stuka dive bomber model. The Stuka was a German terror weapon used in WWII. As it dived to drop a bomb, a siren would sound out from the plane to terrify the people they were bombing. This…
This design is a cloud. If you want to make adjustments or make other things out of it, you can certainly do so :)
Inspired by these shelfs: 1 , 2 . My design have same cloud effect of toilet papers, but using less material and faster print. Designed to be able to print on Prusa Mini (max dimension: 180mm). I used double sided tape to attach to the…
my original clamps started to break after changing the head cushion. So tried my luck with one from printables the original was pretty good only a bit to loose and I had trouble getting the cable behind the aluminium frame. I made the…
Update 7 and 8: 11/16/2021 and 11/17/2021 These are still my recommendations: Siren_Whistle_Mouthpiece v50.stl Siren_Whistle_Horn_Alternate_shallower_indented_cone.stl Rotor_Modification_4p6.stl For some additional experimenting fun with…
It's easy to print, with brim and without supports. I recommend a 0.2mm layer height.
Cloud printed in three parts, joined with a dovetail. Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: No Infill: 10% Filament: EcoPLA by 3DJake PLA Category: Household
About Camping can be very fun, but getting lost isn't. That's why many websites say that you should definitely bring a whistle to any camping or other nature trips in case you ever do get lost. However this is easy to forget and finding a…
This tower was inspired by my grandchildren's play houses made from old pallets, and I imagine if painting models is your thing it could be made to look quite spectacular! In use, there are two chutes which tumble and twirl and clatter…
Cloud Cookie Cutters - 4 different sizes Print Settings Printer Brand: Anycubic Printer: All-metal Mega Rafts: No Supports: No Resolution: 0.2 Filament: Unknown PLA Category: Kitchen & Dining
UPDATE: after inquiries have i made one that is 5 mm high, for more airflow Wall Mount for ubiquiti unifi Cloud Key Gen2 Plus Print one of each. 5mm hole for screw Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: Doesn't…
Simple, easy to print cloud. 2D, no supports needed. Just a very simple cloud “icon”. Enjoy!
UPDATE: After a year of use I noticed PLA was not holding up and where the two parts meet it started to sag. You might want to print this in non-PLA or support it with a plain metal rack. Two-piece design that slide locks together (no…
55mm x 40mm or 2.1in x 1.5in (6mm keyhole)
Wall mount bracket for Ubiquity Cloud Gateway Fiber (ucg-fiber). Gateway snaps into base and is held very tight. Exposes gateways ventilation slots. Slot to assist with removal. If you prefer to have a printed version of the model, please…
I reuploaded the files, so you no longer have to print each part individually, but can now print several parts simultaneously! Thank 16-year-old me for that conundrum. Use two mid-sections per pole.
STEP files are provided and here's the Onshape link if you want to edit any of the dimensions:…
Use M3 x 12 flat head screws. They will bite and thread into the plastic. The tolerances are tighter than the OEM part, resulting in less side to side movement, and a much stiffer snap when adjusting size.
Very small whistle for keychain. Be sure to blow hard.
Crude Remix to be able to print it in one go on bigger printers. At least a 370x370mm printbed is required. Dont mind the blocks in the preview, they are negatives volumes and will not be printed. Load the project as “Only import…
Print in place, Very loud dual tone whistle. Should work off the print bed. If it doesn't then use a needle file to sharpen the air splitter blades to a clean sharp edge. This should improve tone and increase the decibels. I recommend…
This model will work for both left and right sides of the headset. You have to replace both the front and the back of the hinge for each side that you want to replace as it will not mate with the existing shell pieces. Also, for the back…
A set of 2 small clay cutters perfect for creating ear rings, pendants or even buttons from polymer clay, ceramic or porcelain. One size (25mm), mirrored. Best printed solid with a 0.4mm nozzle in PLA.
This is an M2 drive caddy for the for the Ubiquiti Cloud Gateway Max (UCG Max NS) with no storage built in. I printed this in ABS with 100% infill, just to have something for the screw to bite in to. I used a random pc screw i had lying…
UniFi Cloud Key G2+ runs quite hot especially with large hard drive inside ~ 51 C. I've created a mount case with 120 mm cooling fan. Now the temperature is about 37 - 38 C which is optimal. Print instructions No supports 0.2 mm layers…
Arduino code on GitHub: https://github.com/SRRychter/Cloud.git
Introduction When I decided to assemble my HomeLab Rack I wanted each device to have its own dedicated holder, as I like to keep everything tidy and wanted to avoid a mass of shelves. Unfortunately I couldn't find any satisfactory…
Wall mount bracket for Ubiquity Cloud Gateway Max or Ubiquiti Cloud Ultra. Gateway snaps into base and is held very tight. Exposes gateways ventilation slots. Slot to assist with removal. I included another model “key” that can be…
The Unifi Cloud Gateway Fiber device does not come with a wall mount option like a lot of Ubiquiti's devices do. So this model allows you to wall-mount your UCG Fiber. It's designed to allow you to place the device in it with the cables…
Unifi Cloud Key Gen 2 Plus 1U 10" Rack mount. Printed i PET-G.
Credit to @Jonathanlin for including the f3d file that made this an easy first remix! I did slightly reduce the diameter on the side that connects to the Cloudline S6, the fit is very tight so make sure your printer is well calibrated. I…