237 models
UPDATE: I've uploaded the Fusion360 and STEP files for easier remixing in case you can't find the Titan blower. Also check the comments and remix section - there are mods for cheaper roomba filters, philips car filter, active carbon…
Print approx. €0.61–€0.74 excl. taxPreliminary estimate for PETGSource material: PET
This bin organizes my whole cable collection if you guys can see from the photos I use lots of USB Cables and keeping them organize was a challenge until now with this grifinity usb organizer I can pick i cable within seconds no thumbling…
Print approx. €6.66–€8.14 excl. taxPreliminary estimate for one variant
I needed to replace some broken/worn access pegs for a Key Manager board. These are the bobble ended versions. 2 files. The one with the plain end is used to hold the keys and the one with the gear is used to unlock and remove the keys.…
Print approx. €0.96–€1.17 excl. taxPreliminary estimate for PETGSource material: PET
A holder to place a smartphone in while charging hanging in a socket with extra hole to pull the charing wire through. Shape is optimized for a iPhone 14, with a maximum space between the two curves of 82,5mm. The cutout for the charger…
Print approx. €4.19–€5.12 excl. taxPreliminary estimate for one variant
The Gridfinity USB cable manager Small and simple solution to get rid of the USB cablemess in your drawer with Gridfinity! Printing: I printed the model on a ELEGOO Neptune 2s, with PLA filament, layer height 0.28 mm. First layer: 210°C/…
EDIT : I've added a tighter version of the grip. I'd recommend to try first with the normal version first as it is working perfectly for me and most users, but if you find the grip is too loose you can try the tighter version :) Hi !…
Cable hanger to hang and sort different cables like USB C, HDMI, etc. Printed with Prusament PETG no support used
1U Cable Manager for 19" Racks
If you like what I do here, come visit my (German) Discord or my Facebook group. Discord: MX-creations Facebook: 3D printed Grow Tools & Accesories - free .stl a simple and practical rope manager - hex holes inside can be used for my…
These are the pain points I faced with cable organizers all my life! Even my own! So if they resonate with you this model is for you: Taking that one cable out of the pack is hell. The run between organizers is a tangled mess. Too many…
Housing for the LiIon 18650 battery tester, charger, discharger. Consisting of three stl-files: Main Housing Safety Grid for the two power resistors (protects your and others hands) Three knobs for operation Printed on my MK3S+ in PLA,…
über likes makes und follower würde ich mich sehr freuen, Peace MazZe I would be very happy about likes makes and followers, Peace MazZe
I broke one of my wiremanager from my desktop, so i took the caliper and created the model. Then i redesigned it for better printabiliy, with hight strength and a nice design. You have different angles of the shape, smallest and best…
Wallmount for Dymo Label Manager for IKEA Skadis. Remixed from these models: https://www.thingiverse.com/thing:3167836/files https://www.prusaprinters.org/de/prints/100876-ikea-skadis-hook/comments
I created a version with a 7mm-wide slit (instead of the original 6mm slit) and a model with internal space for cables measuring 34x34mm, compared to the original 26x26mm. EDIT: The model is now parametric, you can change settings as you…
I needed a wider gap that didn't have the angular bends to accommodate several power cords in my rack that are rather beefy and don't like to bend. In the photos, the new design is yellow, and I show it next to the original (in purple).…
a useful print to organize the extruder cables for the Sovol SV04 IDEX printer. Also useful to make use of the “mirror feature” because you will need a mirrored part for the second extruder. You will also need a M4 screw and nut and a M5…
I needed a cable holder that could be attached to the back of my cupboard in a relatively hidden way - but still make the cables easily accessible without them falling off. The "balls" are clipped together under the plug (or anywhere else…
Cable Manager / Relief for the Anycubic Chiron. Someone made one where you needed to remove the belt and other parts, with this one you only need to unscrew 2 stepper motor screws and put it in place. Also Stronger and a square guide for…
The Apple HomePod Mini does not have a removable power supply cord so it cannot be shortened. In some installations, this leaves several feet of cord to deal with. I designed a container that will house the excess cord. The container…
2 versions: - 8u stackable - Nonstackable
Keep your cables organized and go from a bin of tangled wires to a bin of plugs. Fast and simple print. No need for supports, and only uses ~10 grams of filament. Plug your desired plug in, wrap the cable around and use the channels to…
This is a remix of the cable manager Strain Relief i found here. Its an improoved version since it allows the cable to move vertically and not form an angle. All you need is a 3mm allen screw from the spare ones, preferably 15mm and a 2,5…
Cable Conduit Manager for Hiding Cables - Modular Design Must be mounted to underside of desk with screws. M4 Holes already added. Print Left, Right parts. Middle parts optional, for extending the cable Conduit. Suggested to use 0.6mm HF…
As promised this is a functioning part that replaced the Zortrax HEPA-Carbon filter. This can be used with the AirManager2 that can be found here:…
This cable manager can be clamped to desks , shelfs or whatever you like. Holds up to three cables tight and save. Very useful. Looks amazing when printed BICOLOR. PLA is strong enough. Material: PLA Layerheight: 0,2mm Infill: 25%
Cable Manager - Clip RJ45 Resize to adjust dimension If you download/enjoyed this file, please leave a like - Thx Category: Hobby
This is designed to fit the 130W power adapter (2.6" x .87") for Dell's XPS 15" laptop. I improved a previous design that eventually broke after a year. This one is slightly bulkier but has these improved features: separate spools for…
This is a simple an minimal holder for the Melodrip and designed to fit on top of an Orea V3 filter holder. Both small (155) and big (185) versions are supported, although I didn't test the small one myself. Feel free to comment regarding…
A cable manager for BambuLab A1 series printers. Choose between many variations. Manage your cables and PTFE tubes with this simple print (less than 10 minutes).
A wall mount for your DYMO label printer. Compatible with LabelManager 280.
A Gridfinity holder for the Dymo LabelManager 160 . Takes up a 3x5 grid
this is a 19" 1u cable manager for your rack You need to glue the top of the cable manager(in the grooves that are printed) to the rest and than you can snap/slide the front in and out of place. it is designed to be glued as to not need…
2020 HEX T-slot twist-in Cable Manager - Guida Cavi con aggancio rapido Suitable for: https://www.printables.com/it/model/767250-profile-2020-alu-4-sides-open-adjust-the-z-scale-t…
Quick remix to allow for larger cables
The organiser can be attached to a surface via screws or double sided tape. Open it on one side to clip in bigger cables. Smaller cables go on top. It has some aligment pins to avoid unwanted twisting. I used PLA for printing, printing on…
This cable manager is there to lay the cables nicely at the table, for example. It is best to use double-sided adhesive tape for fastening. You need a piece of filament (1.75mm) to join them together. Insert the filament into the hole on…
Rj45 Universal Patch Cable Manager / Cable PASS-Through 90 degree angle for Alu 2020 / 3030 / 4040 Profile Suitable for: 2020 -3030 -4040 -500 V-Slot T-Slot Alu profile - Rack 3d printer frame profile Server / Rack Resize to adjust…
Because I need to be more flexible with my cable storage and the usual comb design does not hold the plugs and connectors in place and the cable gets bent, I created this version to be placed on my HSWs. Basic elements: 3 slots, for…
This cable manager is specifically designed for organizing and routing essential but infrequently accessed cables, such as HDMI, DisplayPort, USB, and power cords. It's the perfect solution for hiding cables under your desk, helping…
This is my take on the NZXT "Puck" style cable organizer. This is designed to coil a headphone cable or VR headset tether inside the channel and hang the headset or headphones over the outside of the cube. Print instructions This print…
Easy to print, easy to mount, easy to use. Takes a lot of cables, one handed. Durable and cables can be easy and separately removed. Printed in ABS with 0.2mm Layerhight, 10 at a time
6/3/2025 - adding second version (V2) to lessen the chance of interference with “full spools” I moved all of my “outlets” on the SUNLU S4 to one end to shorten bowden tube paths. I added pneumatic bulkhead couplers at one end so that I…
As many people have used the original design bottom up, I have created this simplified remix of the ID.4/ID.5 USB cable manager. It can be inserted and easily locked in the lid slots and holds the USB cables firmly in place.
27Feb2026 Update: I recently started using the ModulAir Exhaust system from on Makerworld. I really like the easy twist adaptation, so I designed a duct adapter to integrate with that system 26Jan2026 Update: Per a request I've uploaded…
Poor cable management can lead to print issues quickly so fix it with these. Easy to print and you can just zip tie on!
This mount is designed for the Waveshare Solar Power Manager (version D) and has 4mm mounting holes which are compatible with a 5mm-spaced prototyping breadboard. I designed this for use in a solar-powered Meshtastic node so that it could…
The curved slot on the original version of this remix makes it much easier to feed cables into the cable holder. The cable manager has been redesigned and now features three different internal dimensions, three different slot widths to…
My cable comb kept hitting my Y-limit switch during homing, (see pictures) causing crashing during starting. This cable manager attaches to the extrusion via (2) M3x25 bolts and (2) 2020 M3 T-nuts. 3 zip ties are routed through the…
Enjoying my designs? If you'd like to support my work, you can buy me a coffee here: buymeacoffee.com/cstab . Thank you!
This is a remix of the original AirManager V2 Changes: Delta BFB1012M fan which is widely available https://octopart.com/search?q=BFB1012M Philips air filter (4mm shorter, cheap clones available):…
Can be used to hold DYMO label manager 160/280 on multiboard. Connectors attached, can be screwed with 6mm hex key. Two versions available: with open or with close front side. Bottom side hole size is 46mm x 80mm. Top side hole size is…
The track is intended for 3 parts. two are glued together making the base. The reason they are glued together and not just printed from the base is so the weak part of the part (the fingers sticking up are not weaker because of print…
This is a Honeycomb Storage Wall compatible holder for Dymo labelers. The specific model I made it for was the LabelManager 160 but any similarly shaped label printer ought to fit. Made to use minimal plastic and allow for quick grabbing…
I have been carrying a Victorinox Midnite Manager with an USB stick for quite some while. Unfortunately, Victorinox does not provide any upgrades to those USB sticks. As I need to carry quite a few extra GBs of data with me, I wanted a…
Carrier for the DFROBOT Solar Power Manager 5V
Prevents GPU from sagging and covers your Cable-Tree. Airflow optimized. Also had the oportunity to mount my GPU-Support-Fan. The Arms hold snapfit, but because it can get hot and i dont know how the Plastik expands, i added a Cabletie.…
Cable manager Kabel manager zum Aufhängen loser Kabel (USB, etc)
A simple but extremely reliable and useful strap lock for your e-guitar or bass strap (body side), with a built in cable router (ever stepped on your cable while playing? BTDT). Just pop on and you're good to go. Modeled with a diameter…
I remixed it to accept screws so it can be mounted directly to the wall. Thanks to the original designer!
To facilitate the bundling of cables I have drawn it so that the normal cable and also double ones fit into it.
I made this for a friend of mine that wanted tuck boxes for his individual teams. This organizer was designed to fit sleeved cards. Base game only as neither of us are able to get the expansions. I included a blank lid you can modify with…
In Oathsworn, I wanted something that would allow me to manage the cards of multiple characters when playing solo, whilst reducing the space required. It also allows me to easily see where my cards are, and help plan how I'm going to get…
Print in PLA without support Find all my Saitek accessories in my dedicated collection
Case for 1 card; The size of the inner rectangle after printing with the 0.4mm nozzle at standard settings(Super quality; UltiMaker Cura), will correspond to the size of a standard card (length - 85.6 ± 0.13 mm, width - 53.98 ± 0.06 mm).…
Desktop Cable Tidy! So a quick and easy model I made. Still getting into the swing of modelling so this is all new for me. I know there are a few cable Managers online for this sort of thing but I wasn't a fan of the Long large ones. I…
Print instructions Material: I used PLA (but PETG could also work) Layer height: 0.3mm Infill: 20% Perimeters: 3 or 4 Support: Not needed Print orientation: Print as oriented in stl Materials needed 2x M3x8 bolt 1x M4x8 bolt 1x M4…
A cable organizer shaped like a dachshund, designed to keep your desk tidy with a touch of charm. The elongated body holds multiple cables securely, while the simple slot design allows quick access and easy handling. It prints with…
Printed with standard profile on Bambu X1C. Small overhang, no supports needed.
Universal RJ45 Patch Cable Manager / Cable PASS-Through for Alu 2020 Profile Suitable for: 2020 -3030 -4040 V-Slot T-Slot Alu profile - Rack Resize to adjust dimension If you download/enjoyed this file, please leave a like - Thks
Hi, i made this litle cablemanagment clip thing to have under my desk. I used double sided tape to stuck it to the bottom of my desk. There is one for big and one for small cables. image to big for uploading so you can see it here:…
Pegboard holder for a Dymo Labelmanager 160, designed for 1" spaced pegboard holes.
Back Housing for "LiIon 18650 Battery Manager"
A quick design based on an image and text added on Tinkercad to decorate your office and show how successful you are Category: Signs & Logos
This cable manager is designed to fit your 19-inch cabinet. Simply print out the two parts (without bracket) and plug them together. optional: They can also be glued together additionally. I think it is a good alternative to the following…
This is a quick project I made in collaboration with a friend. It is a small AIO hose manager for the ASUS Prime AP201 chassis using a Arctic LF2 280mm AIO. His chassis had a collision with the motherboard, so the AIO was placed in an…
Please read fully. This tray fits two iRobot Roomba 800/900 series HEPA filters and a cheap 10mm activated carbon foam sponge air filter. It fits this remix filter housing for the Air Manager V2:…
Cable organizer/router for edges of desks and similar. Ideal for cables that are often moved around and used (e.g. USB). Optional clip to aid in retention of the cable when they are being moved around frequently. I have included the .f3d…
2020 / 3030 / 4040 Small Bracket Container Holder - Cable Manager - Supporto convertibile in contenitore Suitable for: 2020 -3030 -4040 V-Slot T-Slot Alu profile Resize to adjust dimension If you download/enjoyed this file, please leave a…
Buy the filter here on Amazon or any other place that sells Roomba accessories. https://www.amazon.com/gp/product/B00K7DMEJ0/ref=ox_sc_saved_image_2?smid=A2PVM5SNBKAIHK&psc=1 You don't need to take the tab off as it should slot into the…
This is a 1U rack mountable cable manager for running copper/fiber cables vertically. I designed it for mounting to the front of a APC Netshelter cabinet with the doors off.
This is my attempt to cable manage my e-bike build. The adapter screws into the seat tubing and there are 6 mount points for small cableties. When you are done a lid slides into place and covers up the cables. The model can be printed in…
Der Kabelwickler V2 ist für längere und dickere Kabel gedruckt mit 15 % Infill und einer 0,4 Nozzel über likes makes und follower würde ich mich sehr freuen, Peace MazZe
Hey I Desinged this New Cover Plate so i can Mount it in my LackEnclosure and can easy get it out for Maintaence.
The right side was 2mm off so I mirror the left side
Desk Manager to organize your objects
Printed with PETG and supports. Recommend some hand handing after support removal for smoother edges. Serves as a direct replacement for the cable manager outbound lighting sells on their website. If you don't already have the light you…
This template was created so that I could cut the 2mm adhesive foam for the AirManager v2 using a Cricut rather than cutting by hand.
Small Key Manager for everyday use. Complete it with short Ruthex M3 inserts and M3 screw. Length of screw should match the amount of the keys. Use some M4 washers for a odd amount of keys.
Just some oddly specific spare part, in case your cable clip broke as well. I designed it for the HP Omen Series
A sign which explains exactly , what a Process Manager does. ;-) Adjust the size in x and y direction in your slicer if desired. It is printed in multi-color with manual filament change at layer height. If you like my stuff, then please…
Update 07.02.2026: "Tight" & "Relaxed" Versions I have updated the naming convention and added a new variant based on assembly testing: Tight (Original): High-frequency wave for a firm, secure grip on wires. Relaxed (New): Wide-pitch…
Caractéristiques principales : Design intelligent : Conçu pour maintenir fermement votre câble USB (ou tout autre type de câble) tout en permettant un mouvement fluide. Fermeture magnétique : Équipé de deux aimants pour une fermeture…
IKEA Kapplake Light Fixture + Cord Manager Kit by David Bohn If you mount the IKEA Kapplake light they way they show you to (towards the back of your display case/shelf as to hide the power cord), I found that it will work fine for…
This is a mount for the Lilygo S3 Core, coupled with the Waveshare Solar Power Manager (D), and three 18650's in a cradle. Lilygo S3 Core Waveshare Solar Power Manager Designed for Meshtastic.org solar nodes.
A wall mountable case and cover for the Waveshare Solar Power Manager (B) / (C) ( https://www.waveshare.com/solar-power-manager-b.htm not an affiliate link) Includes: the source Fusion 360, PRUSA and GCode (for PTEG) files for the base…
Solar Manager ( https://www.solarmanager.ch/ ) is a Raspberry Pi based system that measures and regulates supported systems (e.g. inverters, EV chargers, batteries etc.) in a smart home. The Raspberry Pi comes in a box without any fixing…
