Search results: marker

Sort order

3,112 models

P
PrintablesJoe

Radius measurement tool and Cylinder center finder / center marker

This is a remix of https://www.thingiverse.com/thing:1213459 My appologies to the original designer for not including the link to his model originally, as I was unable to locate the original when I posted. For use as a Center Finder;…

Print approx. €1.59–€1.94 excl. taxPreliminary estimate for one variant

Downloads
8,276
Likes
2,792
Rating
4.87
P
PrintablesDmytro

Skyrim Quest Marker

Skyrim quest marker. You can stick it with a double-sided tape to a door, a wall, your forehead, you name it. There are two sets of models provided. Single part model and separate models for each detail of the icon as well as the base…

Print approx. €0.78–€0.95 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
1,788
Likes
477
Rating
4.9
P
PrintablesMiceciCZE

3D Markers Scanning Kit

Recommended material PLA Print settings Layer height = 0.2 For PET reflective film markers ϕ=10mm (6mm dot) https://www.aliexpress.com/item/1005007012274939.html?spm=a2g0o.order_list.order_list_main.5.68971802SpDi3O

Print approx. €1.51–€1.85 excl. taxPreliminary estimate for one variant

Downloads
1,604
Likes
55
Rating
5

Knitting Stitch Marker - “field-tested”, “knitter-approved”

Designed in collaboration with my wife (the knitter), to at least match the performance of her favourite mass-produced injection-molded knitting clips. (I figured there was not much use making something she wouldn't use anyway. Took me 6…

Print approx. €0.08–€0.10 excl. taxPreliminary estimate for one variant

Downloads
1,423
Likes
290
Rating
4.97
P
PrintablesJakeDK

Skyrim Map Markers

A Collection of map markers from the Elder Scrolls Skyrim Includes : Falkreath, Giants Camp, Markarth, Out Door Quest Marker, Quest Marker, Riften, Shack, Solitude, Whiterun, and Windhelm All are 3mf Files with the color change already…

Print approx. €0.19–€0.23 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
1,072
Likes
285
Rating
4.94
P
PrintablesMinietec

Tire markers / Reifenkennzeichen

Easy way to mark and label your changed tires. Just remove the cap of the valve, slip on the marker and tighten the cap. Einfacher Weg um gewechselte Reifen zu markieren. Einfach die Schutzkappe entfernen, Kennzeichen über das Ventil…

Print approx. €0.22–€0.27 excl. taxPreliminary estimate for one variant

Downloads
253
Likes
23
Rating
5
P
Printableschrisebryan

Crayola Marker Stand SuperTips

This 3D designed model is specifically created to hold a pack of 100 count Crayola Super Tips Markers. It features a compact and sturdy design, with enough space to store and organize the markers in an efficient manner. Whether you're an…

Print approx. €25.88–€31.63 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
239
Likes
33
Rating
0
P
PrintablesFabio3D

Marker compass adapter: pen clamp

Have you ever had to draw a circle in pen but your compass had only a pencil tip? With this simple and small print you can screw to the compass colour pencils, pens, markers… Print it is shaped in a easy-to-print shape doesn't need…

Print approx. €0.15–€0.18 excl. taxPreliminary estimate for one variant

Downloads
196
Likes
28
Rating
0
P
Printablesmkoistinen

Quartet Glass Whiteboard Marker Holder

I have a Quartet Whiteboard and designed this 6-marker holder that slides over the whiteboard at the top. I printed mine in black PETG. 1-Jan-2024 - Added a version with 1.9mm holes for markers made by other brands such as Expo.

Print approx. €6.15–€7.51 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
189
Likes
18
Rating
4.5
P
PrintablesPrintium 3D

LM8UU & LM10LUU Bearing Marker

Use this simple tool to accurately mark each LM8UU or LM10LUU bearing in your next build with a permanent marker for precise alignment every time. Prep Clean off the oil film on the outside of the bearings before marking with a permanent…

Print approx. €0.70–€0.86 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
155
Likes
34
Rating
5
P
PrintablesArea51

Car Tire Markers

Easy tire marker for your car - mark when changing tires for winter and summer. Avoid getting the wheels on the wrong way after storage... :) Can be mounted with zip-ties or fits over the air valve for easy placement. Marks (English): RF…

Print approx. €0.80–€0.98 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
150
Likes
30
Rating
5
P
PrintablesMar Ber

Pool Billard Position Marker

Printed with variable layer height. Standard Parameters.

Print approx. €1.59–€1.94 excl. taxPreliminary estimate for one variant

Downloads
149
Likes
12
Rating
5
P
PrintablesNeshi Models

Skyrim Adventure Board Game Marker + Standee for enemies tokens

Hlavní díl a stojánek na žeton potulných nepřátel stačí tisknout tryskou 0,4 mm, vrstva 0,15 mm, vypnutý IS. Rámeček a diamant je lepší z duvodu velikosti tisknout tryskou 0,25 mm, vrstva 0,10 mm, vypnutý IS. Doporucuji nejdříve prilozit…

Print approx. €0.51–€0.62 excl. taxPreliminary estimate for one variant

Downloads
134
Likes
19
Rating
5
P
PrintablesIgnacio Gabriel

Typographic stencil ruler, for markers and Sharpies.

Typographic Stencil Ruler for Markers and Sharpies Description: This versatile typographic stencil ruler is designed for use with markers, Sharpies, and other broad-tip pens. It features characters from the Pauza Stencil typeface,…

Print approx. €2.87–€3.51 excl. taxPreliminary estimate for one variant

Downloads
115
Likes
23
Rating
5
P
PrintablesArchipel

Squid game wine glass marker

7 minutes for a set of 3 markers. Supposing that you need to rest the wine for 15 minutes after opening before drinking, that let enough time to print 6 markers. Just sayin'! Print this set with different colors if needed! Essential of…

Print approx. €0.09–€0.12 excl. taxPreliminary estimate for one variant

Downloads
108
Likes
14
Rating
5
P
Printableswilliamdecker88

Disc Golf Mini Marker Display

Printed on Prusa Mini+. Turned out best when aligned “longways” with the movement of the print bed. I used organic supports (build plate only) on the overhangs of the front of the basket.

Print approx. €4.68–€5.72 excl. taxPreliminary estimate for one variant

Downloads
88
Likes
11
Rating
5
P
PrintablesMonkey Prints

Magnetic Pen Holder for Whiteboard Marker

Pen Holder for whiteboard marker This model can be used as a whiteboard pen holder. Pens up to 17mm in diameter can be used. Simply glue in some 6x3mm or 6x2mm magnets so that the holder stays at your whiteboard. No support structure…

Print approx. €1.00–€1.23 excl. taxPreliminary estimate for one variant

Downloads
82
Likes
14
Rating
5

Carrot Vegetable Marker

If you're like me you plant a lot of seeds in your vegetable garden and forget what you planted where. I made these to help me remember. Included is a gcode for a Elegoo Neptune 4 using PETG. In order to get the correct colours you have…

Print approx. €0.65–€0.79 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
72
Likes
16
Rating
0
P

1:8, 1:6 and Dual Dovetail Markers

Up your dovetail game with these accurate easy to print markers. Included are 1:6, 1:8 and a Dual marker for both. STEP files are included. Printing Tips: Print with multiple filament colors for added contrast for text. Print with text…

Print approx. €0.53–€0.65 excl. taxPreliminary estimate for one variant

Downloads
62
Likes
2
Rating
0
P
PrintablesCorny87

Stifthalter DécoTime Twinmarker

DécoTime Twinmarker von Action für 28 Stifte

Print approx. €11.89–€14.53 excl. taxPreliminary estimate for one variant

Downloads
61
Likes
5
Rating
0
P
PrintablesJPMakesStuff

4v or USB Lithium or INKZALL Large marker holder compatible with Ryobi Link

Holds your Ryobi 4v batteries, or USB Lithium batteries, or Milwaukee INKZALL Large markers to a Link rail Suggested print settings: - 0.20mm QUALITY - PETG (pictured using OVERTURE PETG Grass Green ) - Infill density 20% - Infill pattern…

Print approx. €9.87–€12.06 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
53
Likes
16
Rating
0
P
PrintablesEskichagar

Print approx. €0.07–€0.08 excl. taxPreliminary estimate for one variant

Downloads
50
Likes
6
Rating
0
P
Printablesakamaka

PrusaXL - Dual Nozzle Size Marker

PrusaXL - Dual Nozzle Size Marker One Ring for nozzle size One Ring for nozzle type

Print approx. €0.70–€0.85 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
46
Likes
4
Rating
4.75
P
PrintablesAwei

marker pen box 4x5

The Michael Pen Holder is compatible with Copico and Touch square pen barrels.

Print approx. €8.43–€10.31 excl. taxPreliminary estimate for one variant

Downloads
43
Likes
4
Rating
0
P
PrintablesDzejBee

Golfové markovátko (Golf marker)

Pro lepší detail textu jsem použil trysku 0,25. Více v souboru .3MF

Print approx. €0.29–€0.36 excl. taxPreliminary estimate for one variant

Downloads
38
Likes
2
Rating
0
P
PrintablesKat

Textmarker deskorginaizer

A little helper for the office desk. It can hold up to five small text markers.

Print approx. €3.18–€3.89 excl. taxPreliminary estimate for one variant

Downloads
35
Likes
7
Rating
0
P
PrintablesKubiV

V-Board Master Marker Holder

V-Board Master Marker Holder With fixed Markers in sockets Use 6x M6 bolts and nuts to holde markers in place 2x Magnets https://www.pilotpen.eu/en/v-board-master-marker-pen-begreen-fine-bullet-tip.html?master_product_id=1515

Print approx. €6.44–€7.87 excl. taxPreliminary estimate for one variant

Downloads
23
Likes
3
Rating
0
P

Magnetic marker holder / Magneticky drziak fixky

EN: Magnetic holder of the white board marker, on the fridge CZ/SK: Magneticky drziak fixky (na bielu tabulu) na chladnicku

Print approx. €0.20–€0.24 excl. taxPreliminary estimate for one variant

Downloads
22
Likes
3
Rating
0
P
PrintablesMaWoKo_3D_Druck

Glas Marker for Party

Hey Leute, wer kennt das nicht? Eine Feier, viele Gläser und die Frage, wem welches gehört. Da hilft ein Glasmarker! Einfach, schnell und perfekt, um Filamentreste loszuwerden. Gedruckt mit einer 0,4er Düse in 30% Infill und 0,25mm…

Print approx. €0.04–€0.05 excl. taxPreliminary estimate for one variant

Downloads
21
Likes
1
Rating
0
P
PrintablesAdam

PFD Lash Point Marker

This is a simple marker that you can mount on a PFD lash tab/point for visibility or to identify your gear. Printing instructions Print as-oriented in the .stl file (on its side), probably with a brim. Assembly instructions To attach,…

Print approx. €0.37–€0.46 excl. taxPreliminary estimate for one variant

Downloads
20
Likes
5
Rating
0
P
PrintablesSTEINISKO

Marker holder

Easy 1h print (use 2 sided tape or blue tack to stick to wall or wherever you want ) print at 500% scale (There is small problem with model-in your slicer put Z localisation -0.2mm (to make 1st layer dissapear) ) No supports needed. Use…

Print approx. €1.27–€1.55 excl. taxPreliminary estimate for one variant

Downloads
19
Likes
4
Rating
0
P
PrintablesSapphicJam

PearPenPal for Permanent Marker

The Pen Pear Pal is an ergonomic fixture that goes on a sharpie to increase usablility for people with a number of difficulties holding pens, such as arthritis, tremors, or fine motor disabilities by increasing the size and weight of the…

Print approx. €1.06–€1.30 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
18
Likes
5
Rating
0
P
PrintablesMario M

Channel markers for MackiePro mixer

These little markers have a small magnet inside that keeps them in place. They fit on any MackiePro mixer. There are .stl files for the alphabet and Dr (drums), Kb (keyboard), Kc (kick), Gt (guitar). You can make your own characters if…

Print approx. €0.09–€0.12 excl. taxPreliminary estimate for one variant

Downloads
15
Likes
4
Rating
0
P

RPG mini Stand marker -- fit on MZ4250s models

Helpful to distinguish which creature is which or track status conditions. The need first arose, when my ranger learned Conjure animals. I just printed 8 wolves, but the turns took too long. So I also printed 8 of those in different…

Print approx. €0.06–€0.07 excl. taxPreliminary estimate for one variant

Downloads
15
Likes
2
Rating
0
P
Printableshdrodel

Languo Acryllic Markers Number Tags (1000 Pieces!)

I created this numbering caps that clip on to langos acryllic markers. There's a total of 1000 caps. I Printed them using the following setup to print multicolor prints on my core one without an MMU or AMS system. Prints in PLA without…

Print approx. €5.12–€6.26 excl. taxPreliminary estimate for one variant

Downloads
14
Likes
8
Rating
4
P
PrintablesWelchomatic

Trail Marker

My wife cut a trail through a forested community area and asked that I design a trail marker that would blend in with the forest yet also be visible.

Print approx. €8.22–€10.05 excl. taxPreliminary estimate for one variant

Downloads
14
Likes
3
Rating
0
P
PrintablesAlex

Ubrand Glass Marker Holder

Marker holder for the Ubrand Glass Markers with eraser tip markers. I used a command strip but I attached the obj file so adding screw holes would be very simple and I may end up doing this at some point if the command strips fail.

Print approx. €2.66–€3.25 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
13
Likes
0
Rating
0
P
PrintablesDvG3DAtelier

Wallmount Speedmarker Lets Bastel Create - Improved handling / verbesserte Handhabung

The added cutout makes it easier to remove the Speedmarker from the holder without risking damage to the plastic knurled

Print approx. €1.50–€1.84 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
12
Likes
1
Rating
0
P
PrintablesWinnie-HB

Durchbruchsmarker

Schablone zum Anzeichnen der Bohrungsmitten von Durchbrüchen für OBO Stahlblechkanal 70X170. Ich habe diese Schablone erstellt um mir das Anzeichnen von Durchbrüchen an Dutzenden stellen auf meinen Baustellen zu vereinfachen. Template for…

Print approx. €4.20–€5.13 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
10
Likes
2
Rating
0
P
Printablesfirstgizmo

3D Scanning Marker

They come in many different shapes and forms. Can be equiped with 4x2mm or 6x2mm round magnets in order to have them stick to metal parts (like on cars) or to stick to each other. If you have no magnets, the marker works fine without. The…

Downloads
11,360
Likes
852
Rating
4.89
P
PrintablesART TOO
Downloads
9,409
Likes
2,961
Rating
4.94
P
PrintablesART TOO

LINE MARKER - DISTANCE MARKER (Easy to use)

Easy to use 2 mm increments Demo by きよさん:

Downloads
6,415
Likes
2,351
Rating
4.64
P
PrintablesART TOO

Center Marker - Center Marking Tool (parametric)

Easy to print - center and quarter markings 3 sizes 10 mm 15 mm 20 mm You can scale them even further in the slicer

Downloads
5,901
Likes
2,417
Rating
4.96
P
PrintablesART TOO

LINE MARKER - DISTANCE MARKER (Version 2.0)

Easy to use - Version 2.0 Better readable

Downloads
5,700
Likes
2,077
Rating
4.86
P
PrintablesBamBam Design

Bottle Cap/Marker V2 - Protect your Drink

Bottle Marker/Cap for Drinks & Beer Youtube Short Information about model maintenance: Due to the considerable administrative effort involved in managing models across different platforms, I have decided to maintain only the original…

Downloads
5,045
Likes
1,629
Rating
4.9
P
PrintablesAK3D

Center marker with ruler

Update 05/02/2025: I've made a change that further highlights the millimeters, making it even more functional. I created this simple yet effective tool to find the center of any cylinder, up to a maximum of 180Ø mm. Thanks to the external…

Downloads
4,710
Likes
1,599
Rating
4.89
P
PrintablesWhity

Magnetic Markers for 3D Scanning

Some variants of differently shaped magnetic markers for 3D scanning. The provided STLs are made for disc magnets of the size 10 x 3 mm and do need a pause command to manually insert them during the print (the 3MF file already includes…

Downloads
3,407
Likes
232
Rating
5
P
PrintablesAK3D

Center marker with ruler V2

I've perfected this simple yet effective tool for finding the center of any cylinder, now extending up to 30 cm / 23 inc in diameter. Thanks to the new ergonomic protrusion, it's more maneuverable and easier to grip during use.…

Downloads
3,236
Likes
1,357
Rating
5
P
PrintablesAeviternal

Dead Space Marker - Smoothed and Engraved

Used a (slightly inaccurate but cooler-looking) Unitology font to inscribe the Marker from Dead Space. I've seen various paid models on other sites that use the inferior game rip version of the marker and are full of holes in the mesh.…

Downloads
3,084
Likes
218
Rating
4.94
P
PrintablesWinston

Open Stitch Marker

A simple, open stitch marker for use in knitting or crochet. This stitch marker is approximately 7mm in diameter, making is suitable for smaller needle gauges.

Downloads
3,059
Likes
393
Rating
4.9
P
PrintablesDen

VW Bus Marker or Tool Holder with Working Wheels (optimized for Prusa Mini)

Disclaimer : I do not take any design credit (nor blame for the flaws) of the original model. I merely tried to repurpose and improve upon it for personal use. Optimized for Prusa Mini or similar sized bed: all the files are scaled and…

Downloads
2,997
Likes
731
Rating
4.88
P
PrintablesSurfalex2000

Prusa XL series: Nozzle Scrubber / Brush (UPDATE: included position marker, added 2x redesigned debris bucket)

It cleans the nozzle every Time in get parked. Also great for Tool changer, since it then cleans every Time.No need to adapt gcode or Change the settings! 13.11.2023 Added 2x redesigned and optimized (for 0.6mm nozzle) debris buckets…

Downloads
2,909
Likes
594
Rating
4.88
P
PrintablesART TOO

CENTER MARKER VERSION 2.0 - (Tested)

The new center marker, now with ruler incl. and a more robust design !!!

Downloads
2,830
Likes
1,217
Rating
4.92
P
PrintablesK2_Kevin

Pen, Pencil, Markers, Stuff Holder for Honeycomb Storage Wall

Its a pencil holder I use for pens, markers and remotes. 3 designs available! NEW Versions 2 & 3: With dividers, also helps keep your pens standing at attention. Get your Prusameters… Post your Makes! If you like this project, please…

Downloads
2,506
Likes
466
Rating
4.61
P
Printablesosoderholm

Lockable Stitch Marker

Lock-style knitting markers. Works well when printed in PLA. I recommend printing with 0.15 mm layer height, but 0.20 mm is probably OK too.

Downloads
2,494
Likes
296
Rating
4.88
P
Printablesidnarbjm

Golf Ball Marker - Three Line

This is a golf ball marker, for marking 3 straight lines on a golf ball. It was designed as slightly more than half of a sphere so it sort of clips onto the ball. I made this hoping that you would use a standard Sharpie on the middle line…

Downloads
2,400
Likes
192
Rating
5
P
PrintablesBengineer

Disc Golf Mini Marker

This is a standard putter-shaped mini mark disc used for marking your lie in disc golf. Flies decently well! Add your own image to the top and engrave it before printing. Can be customized for tournaments or for personal use. Makes a…

Downloads
2,323
Likes
172
Rating
5
P
Printableseg_design

3D SCAN PYRAMID MARKERS

As the title states, these are scan markers for 3D scanning primarily used in Structured-light scanning. The embedded magnets are interference fit while the markers are applied as stickers on all 5 sides. BOM 10×3mm Rare Earth Magnets…

Downloads
2,162
Likes
136
Rating
5
P
PrintablesObe_Design

Circle Marker Tool

Compact Circle Marker A rotating axis with a cutout to guide a pen for precise circle drawing. Perfect for DIY and 3D printing! The measurements are in centimeters, with a hole every 0.5 cm to offer more circle size options.

Downloads
1,998
Likes
736
Rating
5
P
PrintablesART TOO

DISTANCE MARKER - LINE MARKER - (Tested)

Perfect for drawing lines at the right distance

Downloads
1,860
Likes
807
Rating
4.67
P
PrintablesAndy Thilo

Bambu Spool Honeycomb Edition with Filament Markers

Honeycomb sided edition of the Bambu refillable spool with filament marker inserts

Downloads
1,826
Likes
195
Rating
4.88
P
PrintablesMeister Edel

Height Gauge & Marker for pencils

Heyho I make knifes and for the handles I dont want to use my very heavy height ripper all the time. So I designed this height marking device to use with a normal pencil (7 mm). There are two versions. 1. 7,5 mm - 65 mm markable height.…

Downloads
1,747
Likes
796
Rating
4.91
P
Printables3D 2Lab

Desktop organizer - 4x11 marker organizer

The hexagonal side Size : 148.00*128.17*10.00 cm. The hexagon has 3 different faces, two smooth, two called "bottom" and two called "top", as in the image. When assembling the pieces, arrange both side pieces in the same way and as in the…

Downloads
1,738
Likes
882
Rating
4.78
P
PrintablesVorinami

3D Scanning Marker Pyramid

I needed some marker setup my Revopoint POP 3D Scanner is able to pick up better than flat one on the turntable. Come up with these minimalistic pyramid I put the scanning markers provided by Revopoint (10mm Diameter). Fast printed , very…

Downloads
1,669
Likes
87
Rating
5
P
Printablesm3d

Knitting Stitch Marker - Strickmaschen Markierung

Easy print for marking the stitches while knitting. The one who requested it finds it very useful :-) printed in PLA If you are interested in knitting, please have a look at my needle gauge 3D model. have fun see also blog post: Knitting…

Downloads
1,613
Likes
281
Rating
5
P
Printablesn8zrebiec

Crochet Stitch Marker

Print in place, just a simple stitch marker. Designed by me but originally posted on my Makerworld page . Print in a rigid material and multiply for however many you need.

Downloads
1,612
Likes
253
Rating
4.11

Mini Monarch Marker - MTG Monarch Token / Mini Crown

A mini crown to pass around during your next commander game that involves the monarch mechanic! The size is just small enough to fit on top of your deck as a reminder to draw a card at the end step. :) No supports! Any settings will do.…

Downloads
1,544
Likes
187
Rating
4.92

Dovetail Marker

Thanks for checking out my model! You'll find all the details, instructions, and recommended print settings below. If you enjoy my designs and would like to support my work, feel free to buy me a coffee . I'd really appreciate it! Happy…

Downloads
1,476
Likes
824
Rating
4.75
P
Printablesgofishrd

Golf Tees and Ball Marker

There are three different versions of the golf tee. The only difference between them is the length. I have a short one that measures 1.75" - I use these for teeing off with irons. They are just long enough to keep the ball sitting atop…

Downloads
1,462
Likes
115
Rating
5
P
PrintablesObiWanJabroni

Page Marker / Holder - 1 Minute Print!

These page markers can be used to hold the page to favorite recipes, important pages that you want to refer back to in a book, favorite quotes, and to hold the page for important study material. They are a great way to help annotate a…

Downloads
1,445
Likes
371
Rating
4.85
P
PrintablesHolzerMax

Knitting-Stitch marker "Maschenmarkierer" - optimized for printing

My aunt asked me to make some knitting stitch markers in different colours. I designed this, which works well with PLA and ABS (thats what I tested so far). They print in around 1 min each, when printed in larger quantities and with an…

Downloads
1,403
Likes
173
Rating
4.94
P
PrintablesElitail

IKEA SKÅDIS Marker & Pencil Organizer – Wave Holder

A compact wall-mounted organizer for markers, pencils, pens and other cylindrical tools , designed specifically for the IKEA SKÅDIS pegboard. The wave-shaped compartments keep your tools organized, visible and easy to access. Manually…

Downloads
1,352
Likes
676
Rating
4.8
P
Printablesenque

Scanner Marker Block Kit

A magnetic marker block kit for use when scanning objects with a 3D Scanner. A Truncated Icosahedron Block (Half-globe Shape) An Equilateral Pyramid A smaller Dodecahedron block A long rectangular bar with space for M6 male and female…

Downloads
1,319
Likes
83
Rating
5
P
PrintablesZdre

UNI POSCA Paint Marker Stand

This stand holds 30 16.5mm diameter POSCA markers. Holder conveniently angles the markers easy selection and quick stowing. No supports required as long as you have good adhesion. Brim is recommended. Minimal manual support in the middle…

Downloads
1,275
Likes
168
Rating
5
P
PrintablesART TOO

DOWEL MARKER - CENTRER MARKER - DRILL MARKER (Parametric)

Easy to print drill marker - Parametric Not as sharp and durable as a metal version but for soft wood it works perfectly. Step file included in case you have any issues.

Downloads
1,240
Likes
624
Rating
4.63
P
Printablespeto.r_

VW Bus Marker Holder

ENGLISH description: A 3D Printed VW Bus Marker holder is a small but useful accessory for fans of the iconic Volkswagen Bus. This marker holder is designed to resemble the front end of a vintage VW Bus and is made using 3D printing…

Downloads
1,217
Likes
315
Rating
4.88
P
Printablesmanuelf

Small Arkham Horror LCG Path Markers

This is my take on path markers for the Arkham Horror LCG. As I do not have so much table space, I wanted to have small markers, which can be placed inbetween the cards without having to spread the cards too much. The single and double…

Downloads
1,195
Likes
175
Rating
5
P
PrintablesTwirlygrlandMom

Kitty Clip - A quick 2-minute paperclip bookmark page marker

A super easy clip to personalize your desktop supplies or add some flair to your bills. We printed it at .15 layer height with our .6 nozzle, but only because that is what is hooked up right now. It would probably still be ok with a .4…

Downloads
1,177
Likes
197
Rating
5
P
PrintablesMat

Dungeons and Dragons Status Effect Markers

These Rings fit the standard Figure size like you get them from Heroforge. The case fits 6 Rings each. Printing Instructions Basic Rings Just add a Color Change at 1.2mm. PrusaSlicer ≥2.4.0 will automatically suggest this. Exhaustion Ring…

Downloads
1,167
Likes
561
Rating
4.89
P
Printableslendres

Expo Dry Erase Marker Set with Fusion 360 Files

Holder for Expo Dry Erase Set. There are two versions, one for 4 markers and one for 6 markers. It can be attached to a wall using Command Strips or placed on a desk or table. There are also recesses in the back for gluing 6 mm diameter…

Downloads
1,164
Likes
164
Rating
4.95
P
PrintablesPeter Farell

John Wick Blood Oath Marker

John Wick Blood Oath Marker I plan on doing this again. I am not satisfied with it. I am going to approach it with a different design technique in the near future.

Downloads
1,133
Likes
313
Rating
4
P
PrintablesJotaEmePM

Pokemon Trading Card Game - Ability Used Marker

0.2 mm Quality 15% Infill Generic PLA Settings You can set a second color in 2.20mm (11 layer) Printed in a Prusa MK3S+

Downloads
1,101
Likes
76
Rating
5
P
PrintablesThomas H 3D

Dune sandworm - first player marker

Sandworm based on Dune 2021. Roughly the same size as the first player marker in the board game Dune Imperium. ~43mm in diameter. Designed to fit into my Dune Imperium insert https://www.printables.com/model/272184-dune-imperium-insert

Downloads
1,053
Likes
86
Rating
5
P
PrintablesCasper Sangild

Golf ball marker tool

The golf ball alignment tool is a game-changer for any golfer looking to improve their aim and accuracy on the green. The tool makes it easy to draw straight lines and other markings on your ball, allowing you to line up your shots with…

Downloads
1,041
Likes
60
Rating
3.89
P
PrintablesJustinB57

Paintball Marker Stand

This paintball marker stand was designed with the intention of being both simple and easy to use. Simply print both pieces out of high-quality PLA, screw the ASA adapter snugly into the marker, try to make one of the fins on the ASA…

Downloads
1,039
Likes
77
Rating
5
P
PrintablesПро СМП

3D-scanner markers

System of objects for 3D scanner markers. All figures have shallow cutouts for 6 and 10 mm markers (8 and 12 mm cutouts). The cutouts allow the markers to stay in place longer, since they do not catch on the edge during storage. The…

Downloads
1,020
Likes
106
Rating
5
P
PrintablesXile6

Marker Tracker Ball 3d scanning

These are hex balls or halves that create a ball. These work great in marker mode tracking for 3d scanners. Simply print a pair. Add marker dots, reflective ones are the best. Then place one 6mm x 4mm magnet into the whole at the bottom.…

Downloads
1,020
Likes
50
Rating
5
P
PrintablesStoneCut

Pen Holder / Organizer for 70x Ohuhu Acrylic Marker Pens

This construction holds 70 pcs of the (IMHO very nice but) fairly inexpensive Ohuhu acrylic marker pens that can either be ordered straight from the Ohuhu website or Amazon and similar sites. Be aware that you'll need 850+ grams of…

Downloads
1,019
Likes
184
Rating
5
P
Printablesgexgecko

Golf Ball Soccer Marker Stencil

This remix fixes the height issues of the original (too much Z space, golf ball would rattle around). I have also added press-fit slots for 4 8x3mm magnets which hold the two halves together while drawing in the stencil. Just print 2 of…

Downloads
1,007
Likes
199
Rating
5
P
PrintablesHalphinian

All Kill Team 2nd Edition Tokens/Markers

All tokens for all Kill Teams that have them, as well as tokens needed for the base game. Some tokens were more difficult to find designs for (i.e. Grisly Mark, Pain, Clearance Sweep, etc.), but I did my best, and hopefully the symbols I…

Downloads
1,005
Likes
73
Rating
5
P
PrintablesMatteo

VW Bus Marker holder

credits to: @munchlax1147 | https://www.thingiverse.com/thing:5182309 This is a remix of calebkraft's Modular VW bus container. I modified it to hold 45 art markers/pencils/pens and remodeled the wheels and wheel wells. It all fit…

Downloads
984
Likes
163
Rating
5
P
PrintablesMarekst

Stitch Markers / Crochet Ring

🧶 Stitch Markers Description: Versatile stitch markers designed for knitting, crochet, sewing, and various crafts . Their smooth edges and rounded shape ensure that the stitches glide easily without snagging, unlike sharp metal safety…

Downloads
978
Likes
171
Rating
4.67
P
PrintablesBuchtomil

XLR Cable Label Rings - quick marker

Simple but extremely practical rings for quick labeling of XLR or other audio cables. No more guessing which cable belongs to which channel – just snap the numbered ring on and you’re done. Designed for ≈ 5 mm cable diameter (typical…

Downloads
946
Likes
181
Rating
4.5
P
PrintablesPeter C

Golf - Golf Ball Marker - Assorted

This is a simple golf ball marker (24mm diameter, 2mm height and 10mm spike) with attached files (initial version) and links to additional newer updated versions (separate models that are 25mm diameter). Template - emboss with your own…

Downloads
945
Likes
133
Rating
5
P

Marker holder

A stand for holding 3*10 or 6*10 drawing markers

Downloads
919
Likes
106
Rating
4.86
P
PrintablesMike1D

Dodecahedron (assembly of Pentagons) for 3D scanner markers (fully parametric)

This dodecahedron can be used to stick reflective markers for 3D scanners to it. It's fully parametric when you use Autodesk Fusion. This was built with a free version of Autodesk Fusion hence the license that doesn't allow commercial use…

Downloads
890
Likes
53
Rating
0
P
Printablesallabout3dblog

360° LARGE 3d scanning frame for marker based laser scanner (Raptor, RaptorX, MetroX, HX)

YOUTUBE video showing the use of this 3d scanning frame: Improved LARGE version of my scanning frame v2 which is working great using RaptorX in parallel laser scanning mode. Motivation for designing this 3d scanning frame: Object can be…

Downloads
886
Likes
154
Rating
5
P
PrintablesBobbyMcWho

MTG Counter Marker

Inspired by this model , I designed this from scratch to print easily w/ no supports and with easy assembly. Print both sides for a +X/+Y counter marker, print just the hole side for a +X marker. You can scale these as needed in your…

Downloads
885
Likes
118
Rating
4.67

Dovetail Marker v2

Thanks for checking out my model! You'll find all the details, instructions, and recommended print settings below. If you enjoy my designs and would like to support my work, feel free to buy me a coffee . I'd really appreciate it! Happy…

Downloads
863
Likes
199
Rating
5
P

Rising Sun Kickstarter-like - Strongholds | Turtles | Flags | Alliance Markers | Dynasty Invasion

So you like Rising Sun Board Game? Do you think too that cardboard strongholds, turtles suck? Print this kickstarter-like-ish addons for your Rising Sun game! Turtle has been remixed from Snapping Turtle by xinghcy0311

Downloads
854
Likes
58
Rating
4.83