Search results: mascot

Sort order

243 models

P
PrintablesShirayukiX

Sukon Bu - Hololive Shirakami Fubuki Overseas Mascot

Scale 57 x 74 x 92mm Overseas version of Shirakami Fubuki's mascot character Sukon-bu (Su-Corns) for foreign viewers. The main difference between the two mascots is the cloth around the neck: Japan viewers have scarves while Overseas don…

Downloads
182
Likes
20
Rating
4
P
PrintablesRepkord

Bolt The OpenSauce Mascot

Excited for this year's OpenSauce so I brought "Bolt" the mascot to life in both finger puppet and bobblehead form! Fan art only. Just for fun, not affiliated with OpenSauce. Just a fun model to commemorate the fun and creativity that is…

Downloads
57
Likes
20
Rating
5
P
Printablespmeineke

Iowa State Cyclone Mascot Cy

Iowa State Cyclone Cy Mascot - All 3 are the same layer heights so they can be printed together or separate. Layers 1st - Red 2nd - Yellow 3rd - White 4th - Black

Downloads
24
Likes
1
Rating
0
P
PrintablesDrgn

FRC MASCOT HELMET

This helmet was orignally made by me for FRC Team 6996's Koala Mascot that we have on the side of our robot. The ziptie slot fits a ziptie of 4.7mm wide and 1.2mm thick, it will fit most ziptie slots, and there is a spot for the ziptie…

Downloads
6
Likes
2
Rating
0
P
PrintablesMINILab3D

MatterHackers' Mascot

Progettato pensando alla risoluzione dei problemi, Phil ha diverse funzionalità specifiche per mettere alla prova la tua stampante. Queste caratteristiche includono: piccoli dettagli inseriti, piccoli dettagli in rilievo, sporgenze,…

Downloads
3,278
Likes
603
Rating
4.93
P
Printablesakmiller01

Simple Claude Code Mascot - Clawd

A simple render of the Claude Code mascot, Clawd. If you print clawd.stl, you can change the color of the eyes with a simple filament change; otherwise clawd_singlecolor.stl has the eyes embossed.

Downloads
1,276
Likes
56
Rating
5
P
PrintablesIDE_IS_LIFE

Supportless Tux (Linux Penguin Mascot)

Fully printable without supports! I chose to use a brim for my prints, but it is not strictly necessary. Mine used 10% infill in a Gyroid pattern in PLA+ at 0.1mm layer height, scaled so it is 100mm tall (around 4 inches) and 2 walls /…

Downloads
974
Likes
68
Rating
4.83
P
PrintablesLucía Castro

TIGER MASCOT FIGURE/ TIGRE MASCOTA FIGURA/ TIGER KEYCHAIN

Dos modelos, uno de una adorable figurilla de un tigre, la otra dispone de una anilla para utilizarlo como llavero. Excelente para regalar. Muy adorable.

Downloads
875
Likes
99
Rating
0
P
PrintablesArkam

Labubu Mascot Dressed High Details

Labubù in high details Supports must be enabled Dimensions: 36 x 33 x 65 (mm) I used around 13 grams of filament in total

Downloads
677
Likes
37
Rating
0
P
PrintablesPubel

Tux mascot - MMU remix

I wanted my Tux printed in colors. So I created 3mf file for MMU. I used PLA but you are free to change everythin you need. You need only three colors. Enjoy!

Downloads
668
Likes
49
Rating
5
P
PrintablesShirayukiX

Takodachi - Hololive Ninomae Inanis Mascot

Ninomae Ina'nis' mascot from Hololive. The halo is excluded from the design for the purpose of 3D printing; also, the model is missing a leg when it should have eight, like an octopus. I plan to edit the model in the future to fix the leg…

Downloads
664
Likes
106
Rating
5
P
PrintablesMDesigns7

MASCOTS FIFA 2026

MINIATURE MASCOTS OF THE 2026 WORLD CUP

Downloads
653
Likes
18
Rating
0
P
PrintablesOZRIDERS

Pet shaped cutter for polymer clay, cookies or crafts - Cortador en forma de mascotas para arcilla polimerica, galletas o manualidades

Pet shaped cutter for polymer clay, cookies or crafts - Cortador en forma de mascotas para arcilla polimerica, galletas o manualidades You can scale it according to your need Puedes escalarlo según tu necesidad

Downloads
589
Likes
141
Rating
5
P
PrintablesMete

Kanye West Dropout Bear 3D Model – Iconic Mascot Figure

Bring home the legendary “Dropout Bear” – Kanye West’s iconic mascot from his classic album covers! This high-quality 3D model captures all the unique details of the famous bear, perfect for Kanye West fans, collectors, and digital artists.

Downloads
573
Likes
18
Rating
0
P
Printablesagranda07

Placas identificadoras para mascotas: perros y/o gatos

Placas identificadoras para mascotas: perros y/o gatos!

Downloads
540
Likes
34
Rating
0
P
PrintablesSick

Creality Mascot Cuva

The creality mascot called cuva

Downloads
513
Likes
35
Rating
5
P
Printablesfribbledom

Gopher Mascot

This is Gopher, the mascot of Go. Original gophers are designed by Renee French CC BY 3.0. Source of the model: https://www.thingiverse.com/thing:3413597

Downloads
459
Likes
56
Rating
4.2
P
PrintablesRichard Romero

Placa Para Mascota Editable *f3d

Editable pet identification tag with name and number on the reverse to facilitate the search for the owner. file in *f3d Placa de identificacion editable para mascota con nombre y numero al reverso para facilitar la busqueda del dueño.…

Downloads
433
Likes
46
Rating
0
P
PrintablesJosef Průša

Mascot of Prague Comic Con by Ferreira

Model designed by famous Czech artist Michal Suchánek and then modeled in Zbrush by 3Dcharacter artist Máricio Ferreira.

Downloads
430
Likes
41
Rating
5
P
PrintablesShirayukiX

SSRB - Hololive Shishiro Botan Mascot

Shishiro Botan's mascot as a model you can print. I suggest using a resin printer over a FFF printer due to the tail's thickness. Edit 4/6/22: Version 2.0 The tale is thicker thicker Adjusted the angle for the fuse to reduce the amount of…

Downloads
426
Likes
49
Rating
0

Placa de Identificacion para Mascotas - Pet ID Tag

You can add words like: Bad Dog Beware, Crazy Owner, Bites, Does Not Bark, Just Came, Mine of Me, Return Eye, Used, Faithful Friend, etc. A stray dog ​​will always walk in a disoriented manner, which can cause him to wander further and…

Downloads
425
Likes
24
Rating
0
P
PrintablesArkam

Labubu Mascot Cute High Detail

Labubu cute in high details Supports must be enabled Dimensions: 34 x 29 x 55 (mm) I used around 9 grams of filament in total

Downloads
415
Likes
24
Rating
5
P
PrintablesVogMan

Mini VogMan – Friendly 3D Printable Mascot (Presupported/Unsupported)

This is Mini VogMan - the chubby-cheeked, thumbs-up, always-positive maker sidekick from the VogMan universe. Whether he’s cheering you on in a build or making a surprise cameo in a YouTube video, Mini VogMan is the printable embodiment…

Downloads
412
Likes
16
Rating
5
P
PrintablesMZ4250

DOTS RPG Project Mascot Dragon!

Here is the very cute dragon mascot for the DOTS RPG Project! They are an amazing organization that specializes in braille dice for blind players! More information of their amazing work here: https://www.dotsrpg.com/ Want to access even…

Downloads
353
Likes
75
Rating
0
P
PrintablesFederico Runco

Linux Mascot Tux - Multipart / No MMU needed

For all the cheapos like me who can't afford a printer with an MMU, I've recreated the Tux penguin in multiple parts. All pieces should snap together, glue is only needed for the feet. When assembling, insert the tummy parts first.

Downloads
351
Likes
55
Rating
5
P
PrintablesAgustin Arroyo

Filameno - Impresoras 3D mascot

Want to support my work and even sell 3D prints of some of my designs? Check the following links. Patreon: http://www.patreon.com/flowalistik Donations: http://www.paypal.me/flowalistik --- Filameno is the official mascot of Spanish…

Downloads
338
Likes
89
Rating
5
P
PrintablesSOVOL3D

Sovol Mascot Soovee

Sovol Mascot Soovee

Downloads
337
Likes
39
Rating
4.83

Tux the linux mascot

I made some modifications to be able to export "colorable" stl's The 3mf file contains the parts, you can change colors in process => by object => select the color for each "sub" object. Enjoy :)

Downloads
323
Likes
81
Rating
5
P
PrintablesShirayukiX

Sukon Bu - Hololive Shirakami Fubuki Japanese Mascot

Scale 45 x 50 x 80mm This is the Japanese version of Shirakami Fubuki's mascot character Sukon-bu (Su-Corns) for her native viewers. I decided to add a little more personality and modeled it balancing on a burger to fit with Fubuki's…

Downloads
323
Likes
66
Rating
5
P
Printables3Z PRINT

Comedero para Mascotas

Comedero para mascotas que he diseñado yo, hay dos tamaños distintos. El tamaño mayor puede que no quepa en todas las impresoras, el mas chico sí. Recomiendo imprimir con relleno para mayor reisstencia. Espero que le sirva! *Puede que…

Downloads
273
Likes
12
Rating
0
P
Printablesrayjizza

IPN (Mex) Mascot

A little donkey is the mascot of one of the most popular universities in Mexico, which celebrate its 84th anniversary this year. Print instructions Single color and multicolor version files.

Downloads
243
Likes
31
Rating
4.33
P
PrintablesAndrea Fontana

Carlo - Bag Clip & hackerscad mascot

Made with hackerscad. This clip is a parametric model written in hackerscad , a CAD where models are code. Open bagclip.hcad (see also: Examples > Carlo from app's menu) to make your own version: change the number of teeth, the tooth…

Downloads
232
Likes
35
Rating
5
P

Spike, the Rat Rig Punkfil Mascot

Meet Spike – The Official Punkfil Mascot We challenged the community to design a mascot worthy of representing Punkfil – Rat Rig’s signature filament brand. Out of several creative and high-quality submissions, one stood out. Spike ,…

Downloads
210
Likes
33
Rating
5
P
PrintablesGeoff.

MatterHackers' Mascot Phil A Ment

Introducing the new MatterHackers mascot: Phil A. Ment! Designed with troubleshooting in mind, Phil has several features specifically to put your printer through its paces. These features include: small inset details, small embossed…

Downloads
204
Likes
27
Rating
5
P
PrintablesPlanetler

mute talisman/charm/mascot/keychain (Rainbow Six: Siege)

Mute talisman from Rainbow 6 Siege, ready for dual extrusion! Just klick "keep in position" for right placement when opening. Created with Microsoft 3D Builder Print Settings Printer: ctc Rafts: Doesn't Matter Supports: Doesn't Matter…

Downloads
183
Likes
17
Rating
0
P
PrintablesProtopasta

Protopasta Protognome Gnome Mascot updated with hex P logo mark on back

Our original gnome mascot from the mid 2010s with our hex P logo introduced in 2020 on his back. A great benchmark part!

Downloads
171
Likes
27
Rating
5
P
PrintablesE3D

King Roary II (E3D's Mascot)

MODEL DETAILS E3D's Mascot, the successor to King Roary I. Multimaterial and single colour models are provided. RECOMMENDED PRINT SETTINGS Use whatever nozzle size, layer height and print scale you like! DESIGNER Designed by our very…

Downloads
169
Likes
35
Rating
5
P
PrintablesJosef Průša

Mascot of Prague Comic Con by Pain

Model designed by famous Czech artist Michal Suchánek and then modeled in Zbrush by Creature artist and deigner David Pain.

Downloads
166
Likes
10
Rating
0
P
PrintablesMDesigns7

FIFA 2026 MASCOT

FIFA 2026 MASCOT MINIATURE MODEL FOR FANS OF THE BEAUTIFUL GAME

Downloads
156
Likes
5
Rating
0
P
PrintablesCabista

Chameleon (Algix Mascot)

Super sweet chameleon Super sweet "what's up" chameleon on a standing platform. I just fell in love with it - and couldn't find it here... So I had to upload it Summary on Thingiverse: Summary This is the Algix 3D mascot. It is a Panther…

Downloads
140
Likes
9
Rating
0
P
PrintablesPlanetler

twitch talisman/charm/mascot/keychain (Rainbow Six: Siege)

Twitch talisman from Rainbow 6 Siege, ready for dual extrusion! Just klick "keep in position" for right placement when opening. Created with Microsoft 3D Builder Print Settings Printer: ctc Rafts: Doesn't Matter Supports: Doesn't Matter…

Downloads
132
Likes
10
Rating
5
P
Printablessvenstaro

Ferris the Rust mascot

Print your very own Ferris! The back and fronts can either be easily glued or just snapped-in (but you can still use glue then to secure it). I recommend variable layer height, making sure to get the finest resolution possible at the…

Downloads
127
Likes
33
Rating
5
P
PrintablesBarfi72

2026 FIFA World Cup mascot

The 2026 FIFA World Cup is approaching, so I created its mascots using AI. There are three of them: a moose, a tiger, and an eagle. I printed them with a 0.1 mm layer height, 15% Gyroid infill, and supports. I was too lazy to paint custom…

Downloads
122
Likes
7
Rating
0
P
Printablesjose vega

Tazón de día de muertos para Mascotas

Recomiendo usar PTG para mas durabilidad y exposición al intemperie puede poner una veladora mi con vaso pequeño o una de aluminio también una a baterías. incluye porta retrato Prueba de temperatura: Empieza con un valor bajo, como 220°C,…

Downloads
117
Likes
11
Rating
5
P
PrintablesKevin Brand

Dispensador Automatico De Alimentos Para Mascotas

¡Simplifica la alimentación de tus mascotas con este dispensador automático diseñado para comodidad y eficiencia! Este modelo permite programar intervalos de dispensación mediante Bluetooth, asegurando que tus mascotas reciban la cantidad…

Downloads
115
Likes
9
Rating
0
P
PrintablesTom Wilkie

Grafana Grot Mascot!

Credit to the excellent Gumilar on Fiverr , who design the model for me off of the images from our design team. STL will need rotating in PrusaSlicer to sit upright. Print with supports.

Downloads
115
Likes
15
Rating
5
P
PrintablesGovaju 3D

Govi la mascota Test de Govaju 3D

Hola soy Govi! La mascota del Canal de YouTube Govaju3D y que he sido diseñado y creado por mcgybeer Mi impresión no requiere soportes. Sólo cortar e imprimir!! A parte de lo divertido que es imprimirme, soy un modelo perfecto para…

Downloads
111
Likes
9
Rating
0
P
Printablesgeoffmyers

Panther Head School Mascot/Logo

Simple 2D model of a panther's head (school mascot/logo)

Downloads
110
Likes
9
Rating
0
P
PrintablesPlanetler

buck talisman/charm/mascot/keychain (Rainbow Six: Siege)

Buck talisman from Rainbow 6 Siege, ready for dual extrusion! Created with Microsoft 3D Builder Print Settings Printer: CTC Bizer Dual Rafts: Doesn't Matter Supports: Doesn't Matter Resolution: 0,2 Infill: 25% Category: Keychains

Downloads
107
Likes
7
Rating
0
P
PrintablesJezzaWalker

R. R. Slugger - LEGO Compatible Slug Mascot

A cute LEGO-compatible slug in honor of the R. R. Slugger YouTube channel. Sort of inspired by some of the older LEGO animals. Modeling this involved mixing LEGO compatibility with my usual half-baked sculpture techniques in Blender. It…

Downloads
106
Likes
20
Rating
5
P
PrintablesSheehanDesigns

Philadelphia Eagles Mascot (Swoop) Mini

NO SUPPORTS! LOW LAYER HEIGHT RECOMMENDED Modeled from scratch Prime and paint, I covered mine in a clear epoxy finish. This model is based on a figure I found in my house, not my original design.

Downloads
104
Likes
16
Rating
0
P
PrintablesBarfi72

2026 World Cup Tiger Mascot

The 2026 FIFA World Cup is approaching, so I created its mascots using AI. There are three of them: a moose, a tiger, and an eagle. I printed them with a 0.1 mm layer height, 15% Gyroid infill, and supports. I was too lazy to paint custom…

Downloads
103
Likes
6
Rating
5
P
Printablesmochr

Bob & Bobek - hockey mascot

Modeled in cinema 4D, printed with PLA, scale 0.1 Maskot IIHF 2015 Czech Republic Print instructions Category: Toy & Game Accessories

Downloads
102
Likes
11
Rating
0
P
PrintablesBarfi72

2026 FIFA World Cup mascot

The 2026 FIFA World Cup is approaching, so I created its mascots using AI. There are three of them: a moose, a tiger, and an eagle. I printed them with a 0.1 mm layer height, 15% Gyroid infill, and supports. I was too lazy to paint custom…

Downloads
101
Likes
5
Rating
5
P
PrintablesFormFutura B.V.

Fil Futura - Mascotte

Meet Fil Futura, this is our well-known figure you have seen on our spools and or other products. We print and use Fil to showcase all our materials and colors. Feel free to print them too! We scale him at a 12cm height for our promotion…

Downloads
96
Likes
23
Rating
5
P
Printablesbirdybro

MiSTer-Kun MiSTer FPGA Mascot

This is a reupload of baxysquare's STL from thingiverse to help spread the love for MiSTer. :) Original from here: https://www.thingiverse.com/thing:4812603

Downloads
94
Likes
19
Rating
5
P
Printables1xMerch

Bulldog Surfer Sculpture - Beach Dog Decor - Surfing Mascot Statue

Buy the full version on Cults3D! Visit my store for paid models! https://cults3d.com/@1xmerch

Downloads
90
Likes
13
Rating
0
P
PrintablesNicolas

bebedero para mascota

bebedero para mascotas, contiene rosca para una botella que le rellenas con agua, asi a medida que tu mascota bebe agua, la botella va rellenandolo, de tamaño 18cm aproximadamente, viene perfeecto para gatos y perros medianos

Downloads
86
Likes
6
Rating
5
P
PrintablesKevDoy

Apple Finder Guy / Mac Mascot Figure

As seen on Apple's social media pages to promote the Macbook Neo, you can now print your very own Finder Guy figure. It doesn’t like sitting up on its own so some double sided adhesive is recommended.

Downloads
81
Likes
3
Rating
0
P
PrintablesXandriel

Luce the Slayer - Vatican mascot Luce + Frieren - 2 poses

2 poses I made of Luce wielding Frieren's staff. Message me if you'd like to see any additional poses, fixes etc.

Downloads
80
Likes
10
Rating
5
P
PrintablesSnuff Klko
Downloads
80
Likes
10
Rating
5
P
PrintablesGoran Skarr

Esso vintage Mascot

I created these mascots for a 1/32 diorama. I printed them in resin, but they can also be printed with a filament printer. There are two mascots, the male and the female. Esso Man Thickness: 4mm Height: 140mm Width: 77mcm Esso Woman…

Downloads
79
Likes
11
Rating
5
P
PrintablesPlanetler

thermite talisman/charm/mascot/keychain (Rainbow Six: Siege)

Thermite talisman from Rainbow 6 Siege, ready for dual extrusion! Just klick "keep in position" for right placement when opening. Created with Microsoft 3D Builder Print Settings Printer: ctc Rafts: Doesn't Matter Supports: Doesn't Matter…

Downloads
78
Likes
10
Rating
0
P
PrintablesPlanetler

mira talisman/charm/mascot/keychain (Rainbow Six: Siege)

Mira talisman from Rainbow 6 Siege, ready for dual extrusion! Just klick "keep in position" for right placement when opening. Created with Microsoft 3D Builder Print Settings Printer: ctc Rafts: Doesn't Matter Supports: Doesn't Matter…

Downloads
75
Likes
6
Rating
0
P
PrintablesPlanetler

bandit talisman/charm/mascot/keychain (Rainbow Six: Siege)

Bandit talisman from Rainbow 6 Siege, ready for dual extrusion! Just klick "keep in position" for right placement when opening. Created with Microsoft 3D Builder Print Settings Printer: ctc Rafts: Doesn't Matter Supports: Doesn't Matter…

Downloads
75
Likes
8
Rating
0
P
PrintablesPhixfeiss

Duo figure - Duolingo mascot

Print Settings: Material: PETG Layer Height: 0.12mm Infill: 15% Supports: Tree Supports (Organic) Creation Process: This model was created using a hybrid workflow combining AI generation and manual 3D sculpting: AI Generation: The base…

Downloads
75
Likes
10
Rating
0

Personalized Feeder for Your Pet / Comedero personalizado para tu mascota

Personalized pet feeder. It has a maximum outer diameter of 20cm and a height of 6cm, suitable for almost all printers. You can always scale the model up or down. The current list of names is: AKIRA ALMA APOLO ARES ARIA ARYA ASIA ASLAN…

Downloads
71
Likes
11
Rating
5
P
PrintablesPlanetler

montagne talisman/charm/mascot/keychain (Rainbow Six: Siege)

Montagne talisman from Rainbow 6 Siege, ready for dual extrusion! Just klick "keep in position" for right placement when opening. Created with Microsoft 3D Builder Print Settings Printer: ctc Rafts: Doesn't Matter Supports: Doesn't Matter…

Downloads
71
Likes
7
Rating
0
P
PrintablesFormFutura B.V.

Fil Futura - Surf Board - Mascotte

Meet Fil Futura, this is our well-known figure you have seen on our spools and or other products. But this time he's ready to Surf throughout the Summer of 22. Feel free to print them too!

Downloads
67
Likes
9
Rating
5
P
Printables3D PRIXMA

Placa personalizada para mascotas (con nombre y número de contacto).

Es un modelo simple, en mi caso lo imprimí con plástico PLA, tiene buen grosor lo que lo hace resistente, las letras sobresalientes y el marco hace que tenga una buena vista, en el modelo no está el número de teléfono de contacto, pero…

Downloads
61
Likes
3
Rating
0
P
PrintablesDante

Gamecocks Mascot Re-imagined

Re-imagined bust of the South Carolina Gamecocks Mascot. Printed on a 5 head XL @ about 350mm tall. PLA with 10% adaptive cubic infill.

Downloads
55
Likes
14
Rating
0
P
Printablesverunka

Kotlin mascot - Kodee

glue all body parts together. it is possible to scale model up or down (my print with googly eyes is scaled down to 60%). you can also use googly eyes instead of printed eyes. recommend to paint underneath the face with white opaque…

Downloads
54
Likes
8
Rating
5
P
PrintablesRanger

Trojan Mascot Gear Key Chain

This was printed at .16 layer height, in Firos PETG. The lower portion is in Navy Blue, and the top 3 layers are in Gold.

Downloads
53
Likes
1
Rating
0
P
Printables3DU

Bebedero automatico mascotas

Bebedero totalmente automatico para tu mascota !!!!!!!!! El agua es vida!!!! Carecer de alimento es un problema si, pero aún más carecer de agua. Las piezas estan ensambladas con super-pegamento (cianoclirato), que una vez seco es inocuo.…

Downloads
53
Likes
50
Rating
0
P
PrintablesPhixfeiss

Tux figure - Linux mascot

Print Settings: Material: PETG Layer Height: 0.20mm Infill: 15% Supports: Tree Supports (Organic) Creation Process: This model was created using a hybrid workflow combining AI generation and manual 3D sculpting: AI Generation: The base…

Downloads
53
Likes
16
Rating
0
P
PrintablesTorrid

Morris Mascot Mini wall art

Saw alot of wall art, but not a mini.. so i thought why not make one. Free but at least give a like ;)

Downloads
52
Likes
5
Rating
0
P
PrintablesLayer Labs

Beaker - Layer Labs Mascot

Print the Layer Labs mascot - Beaker! We believe in the 3D printing community. I have been involved with 3D printing since 2014 and I have developed a deep appreciation for the RepRap movement in that time. There is a significant…

Downloads
52
Likes
12
Rating
5
P
PrintablesAnimaForge

Low Poly Sleeping Fox Figurine | Geometric Sleeping Fox Statue | Modern Desk Mascot Decor | Cute Animal Lover Gift | 3D Printed Orange Fox

Layer Height: 0.12 mm Walls / Perimeters: 2 Infill: 15% Supports: No supports required! Material: PLA Orange

Downloads
51
Likes
6
Rating
0
P
Printablesdubmehard

Kanye West Graduation bear mascot

Hello, Kanye bear companion item. Thanks for your download, enjoy the print!

Downloads
50
Likes
9
Rating
0
P
PrintablesPlanetler

aperture science talisman/charm/mascot/keychain

Aperture science talisman, ready for dual extrusion! Just klick "keep in position" for right placement when opening. Created with Microsoft 3D Builder Grip: http://www.thingiverse.com/thing:2000846 Print Settings Printer: ctc Rafts:…

Downloads
49
Likes
3
Rating
5
P
PrintablesHeidi Makes

Baby Mona Lisa Octocat (GitHub mascot)

Mona is GitHub's famous Octocat mascot. This is a fanart design based on Mona's classic look, but in Chibi-style. Including laptop! Printing Tips I printed these in PLA with 0.20mm speed, 15% infill, seam set to rear , and enabled brim .…

Downloads
48
Likes
11
Rating
0
P
PrintablesMonsieur-Pierre

Vault Boy – Fallout Inspired Mascot Figurine

💖 Support Me If you like this model and want to use it for commercial purposes, you can support me on Patreon and get a commercial license: https://www.patreon.com/cw/MonsieurPierre A classic figurine inspired by Vault Boy from the…

Downloads
47
Likes
6
Rating
0
P
PrintablesPlanetler

jackal talisman/charm/mascot/keychain (Rainbow Six: Siege)

Jackal talisman from Rainbow 6 Siege, ready for dual extrusion! Just klick "keep in position" for right placement when opening. Created with Microsoft 3D Builder Print Settings Printer: ctc Rafts: Doesn't Matter Supports: Doesn't Matter…

Downloads
46
Likes
8
Rating
0
P
PrintablesCarval

Comedero pequeño mascota

Comedero para gato o perro, tamaño pequeño. La base y las patas están impresas en PLA y los platos con PETG. Todos los modelos se han impreso con soportes.

Downloads
46
Likes
10
Rating
0
P
Printablespranav

Clawd (Claude's Mascot)

Some of my favorite Clawd 8-bit figures.

Downloads
46
Likes
3
Rating
0
P
PrintablesMinus One

Minus One Mascot

Meet the official Minus One mascot. I wanted something fun, futuristic, and instantly recognizable—and with Neural4D , I could quickly turn the concept into a fully realized 3D character. Whether you're creating mascots, game characters,…

Downloads
46
Likes
32
Rating
0
P
Printablesadamnant

Fractal Mascot (DND / TTRPG)

Similar to the Pest Mascot a few days ago this is a creature from Strixhaven. It's supposed to be tiny but the level of detail just wouldn't work at that scale so I made small / medium versions of it. With creatures like this AI tends to…

Downloads
45
Likes
11
Rating
0
P
PrintablesAlvaro

Tag NFC para mascotas

Chapa para mascotas con espacio para integrar un chip NFC y personalizar su identificación digital. Se incluye proyecto 3mf configurado para impresoras bambulab y snapmaker U1 con pausa para poner el chip en su inteior, 3mf genérico y una…

Downloads
45
Likes
22
Rating
0
P
PrintablesPlanetler

thatcher talisman/charm/mascot/keychain (Rainbow Six: Siege)

Thatcher talisman from Rainbow 6 Siege, ready for dual extrusion! Just klick "keep in position" for right placement when opening. Created with Microsoft 3D Builder Print Settings Printer: ctc Rafts: Doesn't Matter Supports: Doesn't Matter…

Downloads
42
Likes
8
Rating
0
P
PrintablesSecretqwerty

Tobacco Pusher for Mascotte Tube Filler (Deluxe)

I do not smoke nor condone smoking. My father did not like the pusher that came with his Mascotte Tube Filler Deluxe, as he felt it to be too short. For years now, he's been using a cut up card instead. Well no more! The ones I found were…

Downloads
42
Likes
5
Rating
0
P
PrintablesKaeruWay

Chapa Identificativa para Mascotas con Forma de Hueso

Dale a tu perro o gato una chapa única y práctica con este diseño en forma de hueso. Puedes personalizarla con el nombre de tu mascota y, si lo deseas, añadir tus datos de contacto en la parte trasera para mayor seguridad (se puede hacer…

Downloads
41
Likes
1
Rating
0
P
PrintablesFormFutura B.V.

Fil Futura - Summer Relaxing - Mascotte

Meet Fil Futura, this is our well-known figure you have seen on our spools and or other products. But this time he's ready for the Summer of 22. Feel free to print them too!

Downloads
41
Likes
7
Rating
5
P
PrintablesPhixfeiss

Gecko figure - Open Suse mascot

This little green friend is looking for a new home! Here's a chameleon with large, playful hands and a ready-made handle for catching flies (or just looking cute). Model Information: Aesthetics: Geometric Art Character: Fun, cartoony…

Downloads
38
Likes
5
Rating
0
P
PrintablesFormFutura B.V.

Fil Futura - Sphinx - Mascotte

Fil Futura Relic from Egypt.

Downloads
38
Likes
6
Rating
5
P
PrintablesAlvaro

Comedero mascota

Comedero para mascota.

Downloads
38
Likes
3
Rating
0
P
PrintablesPlanetler

caveira talisman/charm/mascot/keychain

Caveira talisman from Rainbow 6 Siege, ready for dual extrusion! Created with Microsoft 3D Builder Print Settings Printer: CTC Bizer Dual Rafts: Doesn't Matter Supports: Doesn't Matter Resolution: 0,2 Infill: 25% Category: Keychains

Downloads
37
Likes
5
Rating
0
P
Printablesadamnant

Inkling Mascot (DND / TTRPG)

This is another creature from Strixhaven an Inkling Mascot. They're supposed to be tiny but I have it on a 25mm / medium baseplate. This fellow is very much an exercise in the snake hook tool, lots of creases and some teethy bits. Overall…

Downloads
37
Likes
5
Rating
0
P
PrintablesFormFutura B.V.

Fil Futura - Cheering - Mascotte

Meet Fil Futura, this is our well-known figure you have seen on our spools and or other products. Feel free to print them too!

Downloads
37
Likes
11
Rating
0
P
PrintablesAd.G

Hedwige – La chouette de Harry Potter (mascotte de Poudlard)

Figurine représentant Hedwige , la célèbre chouette harfang blanche offerte à Harry Potter à ses débuts à Poudlard. Symbole de loyauté, de magie et de liberté, elle est l’un des personnages les plus attachants de l’univers des sorciers.…

Downloads
36
Likes
6
Rating
0