Search results: mastercraft

Sort order

55 models

P
PrintablesMike B

Mastercraft MultiMeter Box

As an experiment in transparent printing, I embossed hexagons into the lid to make it half as thick except for the ribs between the hexagons, and printed in 3D Printing Canada PC+ Transparent filament using a max of 20 mm/s for the bottom…

Print approx. €0.42–€0.51 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
132
Likes
18
Rating
5
P
Printables3D-surmesure

mastercraft caliper battery cover

A small battery cover for my caliper Print instructions I print this one in PETG with the flat surface on the build plate without support (they were too hard to remove and I broke the small legs). Instead I trimmed the legs with an exacto…

Downloads
883
Likes
52
Rating
5
P
Printablessylvain

Metric socket organizer Mastercraft 3/8 drive

Hex Sockets Mastercraft Hex - 3/8 inch drive for Metric Infill: 15% Resolution: 0.2 Filament: PLA OR PET-G

Downloads
498
Likes
54
Rating
5
P
PrintablesVincent reid

Wall Mounted Drill Holder (Bosch, Dewalt, Maximum, Milwaukee, Mastercraft)

Print in PETG with 20% infill and 3 walls I recommend using snug supports Imprime en PETg avec 20% de infill et 3 perimètres je recommande d'utiliser des supports Snug

Downloads
279
Likes
28
Rating
0
P
PrintablesCapeAero

HSW - Cheapo Mastercraft Caliper Bracket

All the caliper holders I could find for the HSW were designed around the digital varieties. My analog version is much slimmer and didn't fit very well, so I came up with my own. Fits the Mastercraft Vernier Caliper ($10 at Canadian Tire).

Downloads
214
Likes
42
Rating
4
P
PrintablesDiskdaddy

Mastercraft Caliper (older) - Battery Cap

Lost the battery cover for my older sliding caliper from Canadian Tire (Mastercraft). Designed a new one in Tinkercad a

Downloads
191
Likes
16
Rating
4.75
P
PrintablesStay-c Ren-0

Mastercraft 20v Battery Holder

Created on auto cad. Printed in PLA at 25% infill. Use either under shelf or mounted on wall.

Downloads
164
Likes
12
Rating
0
P
PrintablesStay-c Ren-0

Mastercraft 20v Tool Holder

Tool holder for mastercraft maximum 20v tools (drill, flashlight, etc.) Printed in PLA with 25% infill Supports required.

Downloads
154
Likes
9
Rating
0
P
PrintablesCapeAero

HSW - Mastercraft Speed Square Bracket

Holds the cheap plastic Mastercraft speed square from Canadian Tire.

Downloads
145
Likes
18
Rating
5
P
Printablessylvain

Metric socket 1/4 short and long organizer Mastercraft

Hex Sockets Mastercraft Hex - 1/4 inch drive for Metric Infill: 15% Resolution: 0.2 Filament: PLA OR PET-G

Downloads
127
Likes
23
Rating
0

Mastercraft Polishing Pad Kit Organizer

I use this cheap kit to fix small scratches on my car but using the box to store them has always irritated me. This parametric organizer can be customized to fit other uses but is purpose built for this exact kit. It is sized to fit on a…

Downloads
123
Likes
31
Rating
0
P
PrintablesThe Prusa King

Mastercraft screwdriver holder

printed with pla works great for small screwdrivers

Downloads
120
Likes
29
Rating
0
P
PrintablesLolzamarofl

1/4" MasterCraft socket set Gridfinity Organizers

1-4 Mastercraft socket organizer for gridfinity All text is 4mm size and 1mm height above the rest, seems to be the sweet spot for my lil' Ender 3 V2 Metric v2 holds shallow sockets of sizes; 4mm, 5mm, 5.5mm, 6mm, 7mm, 8mm, 9mm, 10mm,…

Downloads
109
Likes
23
Rating
0
P
PrintablesPeterthinks

Mastercraft vise 5 inch soft jaws

Clip on. No magnets. Hook the soft jaw under the normal jaw, tip the soft jaw down. Give it a tap on the top surface with a hammer and it clips onto the normal jaws. Close the vise to seat them. Not sure if they will come off easy,…

Downloads
76
Likes
12
Rating
5
P
PrintablesDessR

Mastercraft Thermometer Wallmount

This is a simple wallmount designed to fit Mastercraft laser thermometers and uses two screws to hold it up. Note Designed for #6 wood screws, up to (7.25mm Head, 3.3mm Shaft, 80°). Printing Recommendations Should be printed with the side…

Downloads
50
Likes
12
Rating
0
P
PrintablesSteve Hanov

Screw holder inserts for Mastercraft 60 Drawer Cabinet

Works only with the Mastercraft 60 drawer cabinet sold at Canadian Tire. The other ones have different sized drawers that won't fit it.

Downloads
47
Likes
8
Rating
5
P
PrintablesReed_pro

Mastercraft Vernier Caliper Gridfinity stand (1x2)

Simple vertical stand for cheap Mastercraft vernier caliper. Model # 058-1647-0 Has a loose fit for ease of use Uses Le0Michine's Fusion360 Gridfinity Generator https://github.com/Le0Michine/FusionGridfinityGenerator

Downloads
46
Likes
2
Rating
0
P
PrintablesLolzamarofl

3/8" MasterCraft Master Socket Gridfinity Storage

These are made for MasterCraft and similar socket sets to fit into my toolbox Gridfinity system. These are the yellow ones in the picture. I will have more 3/8" sets coming including; Metric Deep and Shallow socket sets. Please keep an…

Downloads
44
Likes
14
Rating
0
P
PrintablesPariDot

Mastercraft 12-1/2-in Planer Shroud For Vacuum 31.2mm(1-1/4inch)

I recently bought a planer that didn't come with any sort of shroud to hook up to a vacuum to keep the dust and wood chip mess to a minimum. I have split the long parts in half so that they would fit on a normal printer bed size. I…

Downloads
39
Likes
5
Rating
0
P
PrintablesSean

Mastercraft Framing Nailer, 3-1/2-in. Internal Seals

Mastercraft Framing Nailer, 3-1/2-in. Internal seals. Print with TPU 95A. Piston Chamber Seal may need a light wet sanding to create a favorable mating surface for an air tight seal.

Downloads
38
Likes
0
Rating
0
P
PrintablesKhouse

Mastercraft Maker Coin

This is just a simple model I created as I'm learning how to do 3d modeling with 360. Feel free to modify at will

Downloads
37
Likes
2
Rating
0
P
PrintablesKyle Myers

Mastercraft table saw fence lock

Table saw fence locks for Mastercraft #055-6737-2. One of our saws was returned with a broken part. Instead of scrapping the tool, I modeled and printed a new one. I've included two stl's. One is the foot piece as it was made, and the…

Downloads
32
Likes
9
Rating
0
P
PrintablesSandro Magi

Mastercraft Sander/Ridgid Shop Vac Adapter

simple hose adapter between a Mastercraft belt/disc sander and a standard Ridgid shop vac.

Downloads
30
Likes
5
Rating
0
P
PrintablesACas

Mastercraft Storage Box Latch Handle Replacement

Due to carelessness, I dropped the storage box that holds all of my filament and managed to break the latch handle that keeps it closed. Not wanting to go through the hassle of bringing it back and claiming the warranty, I decided to…

Downloads
30
Likes
1
Rating
0
P
PrintablesJason Gagnon

Soft Jaws for 5" Mastercraft Maximum Vice

Soft Jaws for 5" Mastercraft Maximum Vice.

Downloads
29
Likes
5
Rating
0
P
PrintablesMooseBoys

Radio Plate for MasterCraft Boat

Single-DIN radio trim plate for MasterCraft Maristar.

Downloads
28
Likes
4
Rating
5
P
Printablesredthemesetup

Mastercraft Precision Screwdriver Holder / Carousel

Try not to print with brims, if possible use rafts. you can use 30% infill for the base but for the actual screwdriver holders 100% is recommended

Downloads
28
Likes
4
Rating
0
P

Filament Dry Box Parts. Mastercraft sealed bin.

These are all the parts I modeled to make my own dry box. Other Parts Required for Dry Box Mastercraft Sealed Bin Silica Gel Desiccant 1 ½ abs pipe PC4- M6 pneumatic fittings and PTFE tube

Downloads
25
Likes
14
Rating
0
P
PrintablesWinston

Router bushing (Mastercraft)

A simple press fit bushing for Mastercraft routers. I printed it on fine settings with tree support, as this model needs to be very precise to press fit.

Downloads
22
Likes
5
Rating
0
P
Printableseighty3dp

Mastercraft Toy Tool Battery Cover Replacement

Simple battery cover for Mastercraft toy tool batteries. Only needs support where the little tab is.

Downloads
20
Likes
2
Rating
0
P
Printablessouthbaygsr

Drawer Cabinet Liner/Divider (Mastercraft)

These are liner/dividers for organizing the plastic drawers in a Mastercraft drawer cabinet. I'm using them to store screws and other hardware. The dimensions are 67mm x 51mm x 30mm tall. 0.6mm nozzle, 0.3mm layer, PLA, Sovol SV01

Downloads
20
Likes
3
Rating
0
P
PrintablesNico de Graaf

Mastercraft Caliper Gridfinity Holder

This is a gridfinity tool holder for the mastercraft digital calipers. 2X6 Grid

Downloads
20
Likes
3
Rating
0
P
PrintablesThe_Big_Tacoo

Mastercraft Maximum Impact Extension Holder for Gridfinity

2x4 holder for a full 4 piece set from Mastercraft!. Possibly one of my favorites I've designed so far, the dimensions are quite pleasing. Works a treat! Step files included for modifications.

Downloads
20
Likes
7
Rating
0
P
PrintablesApolloRoboto

Mastercraft Box Cutter Holder for Multiboard

A simple holder that goes on the Multiboard. Helps a lot to keep it's box of extra blades. The Cutter I used is a folding blade knife from Mastercraft. I used the following parts to hold it in place: Heavy Weight-Bearing Hook Snap Small…

Downloads
19
Likes
5
Rating
0
P
PrintablesKyle Myers

Mastercraft Mitre Saw Back Knob

Back knob for Mastercraft 55-6802-6 Compound Mitre saw. Modelled in Fusion360, printed in PETG.

Downloads
17
Likes
1
Rating
0
P
PrintablesNico de Graaf

Mastercraft Pliers set gridfinity organizers

gridfinity holders for mastercraft pliers and side cutters from this kit https://www.canadiantire.ca/en/pdp/mastercraft-comfort-grip-pliers-set-micro-chrome-finish-8-in-3-pc-0584785p.html?rq=pliers sidecutter model # 58-4587-4 needlenose…

Downloads
16
Likes
3
Rating
0
P
PrintablesChad Northeast

Mastercraft Wireless Charging Spacer

I found the wireless charging dock on newer Mastercraft boats to be too large for my iPhone 12 Pro, it would tip over or move to the side and the charging would stop. This spacer will better centre the phone over the charger and allow it…

Downloads
15
Likes
0
Rating
0
P
PrintablesThe_Big_Tacoo

Mastercraft Impact Screwdriver Gridfinity Holder

Was pleasantly surprised when i saw this tool still came in a steel case, but that doesn't mean it doesn't need its own holder! As it was juuust too large for a 1x4, rather than waste space i tossed in holder for eight additional impact…

Downloads
15
Likes
5
Rating
5
P
Printablesddden

Mastercraft Bench Grinder Space

If you do not have the space the wire wheel is too close and the nut will not have enough threads to hold the wheel on if the spacer is to big the wire wheel is too far out and will hit the outside cover and not spin due to the friction…

Downloads
13
Likes
1
Rating
0
P
PrintablesDonald Burden

Vacuum adapter for Mastercraft orbital sander

Use this on your Mastercraft orbital sander for dust collection that's way better than the little box it came with. You will need to trim the little lip off the sander at the connection to get this to fit flush.

Downloads
13
Likes
2
Rating
0
P
PrintablesJoe

Remix for doing a Multi-colour print and a custom fit on Mastercraft calipers

This g-code file is specific to a Prusa Mini/Mini+ If you are printing in Orange with Black text then you'll need to: Start with Orange filament loaded on your Prusa Mini/Mini+ About 8 minutes after starting your print from the g-code…

Downloads
13
Likes
8
Rating
0
P
PrintablesArnimated

Mastercraft MOD Bracket with and without Retention Clip

Strap this bracket to your model to mount to the Mastercraft MOD system.

Downloads
12
Likes
2
Rating
5
P
PrintablesDougS2K

Mastercraft Bandsaw Lower Guide Bearing bracket.

Anyone that has this bandsaw knows that while it's nice that this affordable saw has guide bearings, the bracket for them is too deep making the bearings to far forward and allowing them to come in contact with the blade teeth. This part…

Downloads
11
Likes
2
Rating
0
P
PrintablesSlicster

Mastercraft, Wallmaster or any keyhole type storage - large hook

Mastercraft, Wallmaster or any keyhole type storage - large hook

Downloads
11
Likes
3
Rating
0
P
PrintablesStay Tuned

Mastercraft Electric Lawnmower on switch

My lawnmower on switch broke and I lost the part that fell off. Using Sketchup, I was able to recreate the handle and tested. Works great! Printed with PET-G, with minimal branch supports and 40% infill.

Downloads
11
Likes
1
Rating
0

Mastercraft Maximum 20V tool holder

The holder has a perfect fit for to dhe drills, impact tools and the like. Features various mounting holes for #8 flat head screws, or #8 round head/socket head screws.

Downloads
10
Likes
1
Rating
0
P
PrintablesWoodborne

Mastercraft belt sander vacuum hose adapter

Remixed a model from Grant@GranitWorks to make it work with my Mastercraft belt sander. Print with the flange contacting the bed. Use supports (contacting bed only) and a large brim to prevent tip over. I printed with PLA at 0.2mm layer…

Downloads
7
Likes
2
Rating
0
P
PrintablesStephen Belaire

Gridfinity Mastercraft Temp Reader Holder

Gridfinity Holder for a Mastercraft Temperature Reader

Downloads
7
Likes
0
Rating
0
P
PrintablesStéphan girard

switch cover, press drill mastercraft

switch cover, press drill mastercraft

Downloads
6
Likes
1
Rating
0

Mastercraft Chisel Wall Mount.

Bought a set of Mastercraft (Canadian Tire Brand) Chisels and wanted to hang them on my tool shelf. So this exists now. Clicks into place. Wish it came with one CANADIAN TIRE‽ I have included the Fusion 360 File if you want to make your…

Downloads
5
Likes
1
Rating
0
P
Printables

Mastercraft belt sander vacuum hose adapter

Remixed a model from Grant@GranitWorks to make it work with my Mastercraft belt sander. Print with the flange contacting the bed. Use supports (contacting bed only) and a large brim to prevent tip over. I printed with PLA at 0.2mm layer…

P
Printables

Mastercraft Caliper Gridfinity Holder

This is a gridfinity tool holder for the mastercraft digital calipers. 2X6 Grid

P
Printables

Vacuum adapter for Mastercraft orbital sander

Use this on your Mastercraft orbital sander for dust collection that's way better than the little box it came with. You will need to trim the little lip off the sander at the connection to get this to fit flush.

P
Printables

Mastercraft Pliers set gridfinity organizers

gridfinity holders for mastercraft pliers and side cutters from this kit https://www.canadiantire.ca/en/pdp/mastercraft-comfort-grip-pliers-set-micro-chrome-finish-8-in-3-pc-0584785p.html?rq=pliers sidecutter model # 58-4587-4 needlenose…

P
PrintablesKrotek-inc

Mastercrafted Susser Dagger Baldurs Gate 3

____________________THIS IS DIGITAL PRODUCT___________________ ______________________NON-REFUNDABLE_______________________ ___________________STL FILES FOR 3D PRINTING___________________ Ready to print Mastercrafted Susser Dagger from…

Likes
4
Rating
0