101 models
It´s a little box to make unused space accessible. espacially for Pinhole Patterns of Ikea-Method kitchen funiture. Note: I increased the Vertical shell Perimeters to 5, to avoid infill in the Walls. To make everything look smooth, I…
Print approx. €1.65–€2.01 excl. taxPreliminary estimate for PETGSource material: PET
Spice rack fits perfect in a drawer of o method kitchen from IKEA. For one length you need two times the start file and one time the end file. I added a gcode for a whole lenght for a mk4. I used default settings in prusa slicer.
Print approx. €8.86–€10.83 excl. taxPreliminary estimate for one variant
Auf der Grundlage ( Grundplatte ) von @Muurph_109447 und seinem IKEA Method Holepattern Organizer 70x45x35 brauchte ich noch einen Halter für meine Zangen.
Print approx. €0.70–€0.86 excl. taxPreliminary estimate for PETGSource material: PET
It always bothered me that I couldn't get the last bit of soap out of Method hand soap dispensers apart from rinsing out the bottle and washing it all down the drain - this seemed wasteful and unnecessary. Using this coupling, I can now…
Print approx. €1.03–€1.25 excl. taxPreliminary estimate for one variant
I was recently given a spool of MakerBot Method Series PLA to work with, only it didn't play well with my printer! So I whipped up a quick and dirty spool adapter to allow me to print the things I needed to print. It's not perfect, but it…
Print approx. €2.45–€2.99 excl. taxPreliminary estimate for one variant
Let me know if you need other size (100mm included)
Print approx. €0.15–€0.18 excl. taxPreliminary estimate for PETGSource material: PET
My Website This is my custom-designed Dart camera setup with an integrated light ring. I printed the whole setup on a Bambu Lab A1. The problem with other setups is that I hit the camera on top when trying to throw a double 20. User…
fishing feeder used in method feeder fishing
krmítko pro method feeder tištěno z ABS +y ale bude fungovat z jakéhokoliv plastu Method feeder for fishing this is printed from ABS+ but it works with another plastic
Inspired by OpenSCAD Voronoi Generator by Felipe Sanches. Two .scad files are provided: fastvoronoi.scad can be included on its own with no other libraries. fastvoronoi_func_bosl2.scad is for use with BOSL2 . It provides a functional…
My version of a method feeder and mould. Glue 3x M10 nuts on the back to give it some weight to stay on the bottom when the bait falls off. Thread fishing line through hole in body. Printed PLA with 15% infill
While attempting to improve my ability to draw faces recently, the Loomis method really clicked with me. The part I struggled with the most was accurately drawing the curves on the sphere from an arbitrary angle, and I wished I had…
Filaments can be used such as PETG but then you might need to add some coating inside the resevoir to prevent the water from leaking. But I printed mine in PLA, and i have no leaking, so i would recommend to print the base “resevoir” in…
This is a quick and simple print for the outer corner of the plinth´s of ikea method kitchens. Fits with friction, but can supported with some glue. Printing details Print with given orientation no supports needed Layer height 0.3
vylepšené method feeder krmítko tištěno z ABS + ,ale bude fungovat z jakéhokoliv plastu závaží volím buď plech vystřižený a nanýtovaný nebo zaleju olovem a je klid Method feeder for fishing this is printed from ABS+ but it works with…
A simple method feeder for fishing enthusiasts who always lose them (me). I printed this in PETG for maximum resistance and for hot weather. If you have really good brindging settings it may print without any supports on the back also,…
I had an issue with my Ikea kitchens spicerack, being made of a wire frame not holding my spices that are in pouches. So I made these organizer boxes to store neatly all my spices inside the spice rack. Boxes are meant to slide into…
The LandCruiser and Lexus LX have a front hub that extends further out than the Method 703 wheels. This extension mounts to the wheels, then allows the Method hub cap to mount to the outside. NOTE: I just added a second set of files that…
Method feeder pro lov kaprů. Soubor Feeder zavaží slouží jako šablona pro obkreslení na plech a vystřižení. Závaží k feederu přiděláno záp. šroubem a maticí M4. Po zkompletování se závažím je hmotnost feederu cca. 25g. Print instructions…
DIY CO₂ Generator (Jello Method) This is a custom bottle cap and valve for a DIY CO₂ generator using the jello method , designed to provide a low-cost, consistent CO₂ source for your planted aquarium or aquascape. How it works: Ordinary…
Rotate the model to stay flat on one of the nobs. Print settings TPU 95 material 20% Cubic infill 3 walls normal supports
For your enjoyment, I present single part design center caps for Method 501 and 502 rally wheels. These may fit something else, but I wouldn't be aware of what. The bare aluminum center caps on these wheels are really crappy if you use…
Bei uns waren die mitgelieferten Sockelclips zu kurz. Diese passen perfekt. Länge mit Platte gesamt ca. 86mm. Wenn eine andere Länge benötigt wird, bitte in Fusion bearbeiten. Die beiden Teile habe ich mit einer M3x10 Senkkopfschraube…
Hi everyone! I want to share my method to create "acceptable" Timelapses. Currently, i'm not able to create those brilliant/perfect ones that we can see all over the internet but i hope to soon find the good configuration. With this…
A relatively quick hack that you can use as a mould for lew597's method feeder , which caught me two nice fish upon its very first use. There is a print-in-place push-out button which you can use to loosen sticky bait from the mould.…
These are picture hangers to be applicated e.g. to stretcher frames. I made different versions to be srewed, nailed or glued to the frame, also there are two versions for fixed and adjustable position.
We have Hackas grips on our method kitchen from ikea. The scews of the grip are used to secure the hooks at the interior of the door. I provided a low and high model. Happy printing
In unserer Ikea-Küche verwenden wir das METOD 20x60x80cm ( Link ) als unser Gewürzregal. Wie auf dem Vorher-Nachher-Bild zu sehen ist, war das Durcheinander unerträglich. Also habe ich ein Ordnungssystem entwickelt, welches leicht zu…
Many have seen the study that demonstrates a single ventilator can be hacked to server multiple patents. This method is very controversial for many reasons but if hospitals decide to use this method, this manifold system is easy to print…
Print on its side, as shown in the picture. I am using a drybox with the prusa xl so I dont have to store filaments after use. The problem with my drybox was that the PTFE tube had too many bends and it was very difficult to load new…
This is a simplified version of the Part A / base part from @StrayCat to save some printing time. I was able to reduce the print time by omitting the complex initial structure of the original part and using a simple cuboid instead. This…
If counterbore holes for nuts and bolts are provided on the bottom side, printing tends to be disturbed. Also, it is not practical to use support pillars because they are too narrow. The modeling methods described here solve that. As an…
The STL file needs to be split into multiple parts in the slicer according to the maximum height of the Z-axis. After cutting and properly rotating (cuts placed on the bed), print without supports. Material is up to you. I printed with…
We got two Makerbot Method X and a couple of extruders with it. I needed a holder for these close to the printer. After a couple of iterations i had these holders. The holder can contain two extruders and also the tools from the printer.…
An organizer for the 30cm Ikea Method Rack to store 8 spice glasses (~67mm diameter) more efficiently.
Embout de plinthe de cuisine Ikea method
Wenn Sie nur einen Befestigungspunkt durch einen Fuss haben und die Fussleiste wackelt , kann man diese Innenecke einfach auf das überlange Teil aufschrauben und das schmale Teil in das U einsetzen .
[Unofficial] LowRider v4 dust shoe modified to: allow two-wrench method of tool change AND work with Kobalt router (maybe also Makita) Posting at request of a V1E forum member! NOTE: some of the pics are of a TEST print just to check for…
Aeropress Holder – The Ultimate Brew Station Your AeroPress has probably been through countless brews, early mornings, and last-minute caffeine emergencies. Whether it’s fresh out of the box or a battle-hardened veteran with years of…
Choose a representation of the shell based on degrees of rotation then print either all of the rings, all of the cylinders, or all of both.
I typed PETG, but I think any one will do. The printing settings are your standard ones for the plastic used, at least 2 perimeters and at least 3 layers at the top and bottom.
Make a starry pattern tealight holder using vase mode and under/over temping your hotend (do this yourself, although the picture is what was produced by the G-code. Try furry sides for a different look possibly.) MADE IN PETG
This is a introduction to the printing technique I am calling Hex Wall Additive Manufacturing (HexWAM). It is a different method of laying down print lines to interlock layers together, similar to the cells of a bamboo plant. In the Zip…
For a bit more information, see the thread at https://www.theminiforum.co.uk/forums/topic/360208-the-string-method-3d-printing/ Need a version for the rear, too? Sorry, that one's up to you. Mine hang off a bespoke towbar, so won't help…
🎣 Preston ICS XL Feeder Organizer / Ladder – Clean & Functional Storage Solution A dedicated organizer (ladder) designed specifically for the Preston ICS XL feeder system, created to keep your rigs neat, secure, and always ready to use.…
Nozzle: 0,4 Supports: NO PLA, PETG I will be happy if you publish your printed model :)
My corner cover broke, so I printed a new one. Here are my print settings: 0,2 mm layer height 100% infill Standing on small edge with organic support on the print bed (otherwise the nose will likely break) SUNLU PETG grey
IKEA Method kitchen organiser to suit existing holes Material used: Overture matte PLA - Bin Marble PETG - Plugs No supports 15% infill No bed adhesion Creality K1C - 35 min total print time
Merging the Cable tray made by ftobler with the idea of using stampler instead of screw to minimize damage to drywall from CyberCyclist , I've created this Thing. You can use this to hang various type of USB cable and other electrical…
Simplest print on the site probably… so I gave it some bumps, holes and text for aesthetics :)) It'll cost you 1.84 meters / 5.49g of filament - but can be scaled up or down to your liking. I found it easier to use this rather than a fork…
lite box to organise the drawers in my kitchen. I made it 3-parts (2 x side / 1 x center) which connect so one can resize the box to various kitchen drawers. The drawer in the picture is a 60cm drawer. The box is 50mm high and 100mm deep.
go to tinker cad, and use it how you will
4Runner Method Wheel Pop in Center Cap.4Runner Method Wheel Pop in Center Cap. The Caps from Method Wheels keep falling out and they want to much for them. Should work on these models, 308, 310, 311, 312, 501, 502, 605, 606, and 610…
These are modules of 10x10 cm and 15x15 cm square and angular that assemble among themselves to build the necessary grid system to the establishment of a plenum in the Jaubert's method of a reef aquarium. The height of the modules is 2…
This is a model of 3 different pair of horns I made for my project! They were meant to look something between a branch and goat horns, I painted mine with acrylics based on actual horn references! They are made to be glued to a rubber…
A simple holder to hold trash bag rolls inside an Ikea Method cabinet. Print the two parts, no support needed. Category: Kitchen & Dining
Spoiler alert : My idea didn't work. I'm publishing this test because I think it's important to know what does not work, as well as what does. Perhaps someone else will have more success with the idea than I did, or perhaps it will…
This is my suggested solution to LeeH's embossing problem here: https://forum.prusa3d.com/forum/general-software-discussion/fusion-emboss-function/ Updated 240318 with simpler approach. More sketches but less time selecting lines.
Hi everybody, A file to be processed with openjscad. https://openjscad.org/ The aim is to provide a parametric lens file enabling the printing of optical element by FDM. Salt annealing method was performed as described…
Default kitchen skirtings are 8cm or higher. My kitchen with the fride and everything has been lowered to fit. Created a custom ventilation part that is 4cm high. 2 will be placed side by side where the fridge and other appliances are to…
I simply fused CyberCyclist's stampler stampler wall mount parts to psionic001's compact controller wallmount to create this. You can use a normal paper stampler to pin it to your drywall without using any screw or tape. This leave just a…
This print is a proof-of-concept of a method for making a replacement lens (clear dial cover) for a mechanical dial caliper (see photos). I have included the print files I used, but it should be noted that these parts needs to be…
This project was made to address issues with the original spindles for the Makerbot Spool Mount. We had problems with cardboard spools not spinning freely and slipping down the angled parts which causes them to bind. I took a lot of…
Ständer mit Platz und Durchführung für einen LED-Strip für das Periodensystem der Elemente von Methodisch inkorrekt! / eMpirie https://empirie.de/products/periodensystem
I modeled the Type V variation according to the standard instructions provided here: https://borgoltz.aoe.vt.edu/aoe3054/manual/expt5/D638.38935.pdf . I use a laser cutter to cut my material using the .dxf file provided. Please note, the…
A small, Arduino Uno based ISO15693 RFID Cloner. The code is on my Github with the Instructions and BOM in the README.md. https://github.com/GO3R/Makerbot-RFID-Cloner/ I needet a cloning device for the RFID tags from the Makerbot Method X…
Many Method alloy wheels come with center caps (lids), but the protruding front hub on the Toyota Land Cruiser 100 Series often prevents them from fitting properly. I designed these extensions using ChatGPT 5 to provide the necessary…
This lid allows you to reuse an old Pot Noodle container as a pot for growing plants using the kratky method. The hole is 32mm to fit a net pot, the ones I bought were described as 1.5" pots. There is a small ridge so it clicks around the…
This is not so much a "thing", and more of an essay on using the Z-hop technique I saw on Chuck Hellebuyck's YouTube channel a couple of weeks ago. It's not something that a complete novice should attempt, as it isn't just a case of…
Hier ein Ständer, ein Schild unf ein Stift zum 3D drucken als Schild für den UNterricht
The bottom of our soap dispenser is concave and always traps water which gets gross after a while. This print holds the soap elevated off the counter and allows the water to dry. The feet of the holder are printed separately and are…
My wife isnt strong enough so i created this little tool. Slide it at the bottem side facing down. (use some small cloth to prevent damage) and you can lift up the cabinet. Smaller version is 47mm. (i reduced the feet to 50mm in total to…
4Runner Method Wheel Pop in Center Cap.4Runner Method Wheel Pop in Center Cap. The Caps from Method Wheels keep falling out and they want to much for them. Should work on these models, 308, 310, 311, 312, 501, 502, 605, 606, and 610…
Zum darstellen der Projektionsmethoden. Perfekt um Azubis zu erklären wo welche Darstellung hin kommt.
4Runner Method Wheel Pop in Center Cap.4Runner Method Wheel Pop in Center Cap. The Caps from Method Wheels keep falling out and they want to much for them. Should work on these models, 308, 310, 311, 312, 501, 502, 605, 606, and 610…
AereoPino is a one-piece 3D printable airplane toy designed according to the Montessori philosophy. With smooth lines and balanced proportions, it encourages free manipulation and imaginative play. The design ensures safety, durability,…
Made the outer ring larger so it can fit on more drippers, specifically made for UFO, first remix
Version 2.0 of my Makerbot Method X RFID Coil Cloner is finally finished. Unfortunately, I had to remove the clone function, but you can still select all 16 materials and 16 different colors and read the tag in the serial monitor. Plus,…
Ikea Method foldable crate storage hooks Simple platform to store foldable crates in the Ikea method kitchen cabinets. Plate contains for plates that can be scewed in with the standard ikea screws used for drawers. (ikea partnumber…
This is Gridfinity based model that I modified using provide parameters from a parametric file created by Zack Freeman. I then modeled the main tray features to fit Makerbot MethodX Printer heads and associated nozzles, and tools.
Keep your Method Feeder rigs organized, protected, and always ready for your next fishing session! Tired of tangled rigs and messy tackle boxes? This simple and practical 3D-printed organizer is designed to hold your Mikado QMF Method…
Water via PEG Feeding bottle spacer using Giving Set Backpack method. Bottle:- Nutricia Flocare Container 1 Litre. Nutricia Flocare Container 1000ml 1L With Cap 10 each Sterile Empty Latex Free I found this bottle to be loose compared to…
I began with the insert press sold by Damomaker on Amazon ($36). I designed the attached trial piece. I printed it in PETG-HF. I attached the flat face tip after removing the very pointed tip that is preinstalled on the iron. This flat…
This is a rough and ready stencil to draw the 9x9 grid required to use the Mandala goal setting method, for those of us who are not gifted with the ability to trace straight, evenly spaced lines... You can learn more about this method…
A little cap to place in the holes of a method cabinet for when you are not using the legs.
This is a simple way to hold your soap bottle upside down. I made it using a 3d scan of the bottle that was cleaned up with ChatGPT, then put into a holder. Recommended to print with 0.15 or 0.10mm layer height, 2 or 3 perimeters. No…
An organizer for the 30cm Ikea Method Rack to store 8 spice glasses (~67mm diameter) more efficiently.
Aeropress Holder – The Ultimate Brew Station Your AeroPress has probably been through countless brews, early mornings, and last-minute caffeine emergencies. Whether it’s fresh out of the box or a battle-hardened veteran with years of…
Water via PEG Feeding bottle spacer using Giving Set Backpack method. Bottle:- Nutricia Flocare Container 1 Litre. Nutricia Flocare Container 1000ml 1L With Cap 10 each Sterile Empty Latex Free I found this bottle to be loose compared to…
For a bit more information, see the thread at https://www.theminiforum.co.uk/forums/topic/360208-the-string-method-3d-printing/ Need a version for the rear, too? Sorry, that one's up to you. Mine hang off a bespoke towbar, so won't help…
This is my suggested solution to LeeH's embossing problem here: https://forum.prusa3d.com/forum/general-software-discussion/fusion-emboss-function/ Updated 240318 with simpler approach. More sketches but less time selecting lines.
Inspired by OpenSCAD Voronoi Generator by Felipe Sanches. Two .scad files are provided: fastvoronoi.scad can be included on its own with no other libraries. fastvoronoi_func_bosl2.scad is for use with BOSL2 . It provides a functional…
These lug nut covers will fit on the Ford Transit AWD (not RWD), on Method MR701/MR703 wheels, with factory nuts. Very unlikely to fit other configurations. Friction keeps them in place nice and tight, no need for more (e.g. magnets).…
I am offering the original FreeCAD model file along with the method to create custom trophies. Like this: https://www.printables.com/model/1360393-father-excelence-award This package includes: The editable FreeCAD template model…
Method feeder. The feeder fits well in the red mold from Preston. Lead size in the attached photo. I recommend using a high-quality waterproof glue, for example Mamut. You can use PETG as a material, but it is much better to use PCTG…
This is the first time I’ve used the 0.8 mm nozzle, and I ran into problems because of the cheap, very low-quality filament. The matte PETG is a questionable blend that limits you to a very narrow temperature range of no more than 5…
A project to "Open" the Makerbot Method and Method X by replacing "closed" parts like Extruder and Mainboards to available 3rd party parts and Open and free Software like Mainsail. This part is a carriage to be able to mount the Chaotic…
![[Unofficial] LowRider v4 dust shoe modified to: allow two-wrench method of tool change AND work with Kobalt router (maybe also Makita)](https://media.printables.com/media/prints/643d038b-76b4-40b3-9330-7f955d3ceb6d/images/10616326_bbc2a22c-f105-4307-82c0-fcbe57513ffd_f5bb75a9-49a1-4677-addc-a44f62d30f5f/img_9430.jpeg)
