Search results: mik

Sort order

1,385 models

P
PrintablesKlaasYK

Multicolor Rummikub tiles

Simple Rummikub tiles you can print yourself! Even without a MMU! Any friends which color vision deficiency? Take a picture of all your filament colors and let them choose 4 colors they can distinguish! Now you can all play together :D…

Print approx. €1.33–€1.63 excl. taxPreliminary estimate for one variant

Downloads
1,320
Likes
130
Rating
5
P
PrintablesSmoluch

Rummikub Travel stackable tile stand

As we play Rummikub a lot we optimize our ways. We use the travel set with smaller tiles and I've designed custom, stackable stands with four grooves, so you can store each color separately. It is not a super easy print! You need a strong…

Print approx. €4.74–€5.79 excl. taxPreliminary estimate for one variant

Downloads
838
Likes
79
Rating
4.5
P
PrintablesCaptainAl

Mikrotik RB5009UG - 10 inch or 19inch rackmount kit

an easy-to-print ram mount holders for Mikrotik RB5009 for 10inch or 19inch rackmounts.

Print approx. €1.00–€1.23 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
572
Likes
30
Rating
2.75
P
PrintablesAxelCo

Raiser / stand for MikroTik RB5009UG+S+IN / RB5009UPr+S+IN POE IN/OUT router

Raiser / stand for MikroTik RB5009UG+S+IN and RB5009UPr+S+IN POE IN/OUT (thank you @Omni_RF for testing) router. With the stand the ground clearance is 24mm. Thus, you can route your network cables underneath the device and also help to…

Print approx. €0.05–€0.06 excl. taxPreliminary estimate for one variant

Downloads
283
Likes
33
Rating
0
P
Printablessnoty

Mikwaukee M18 Fan Power Supply Holder

The Milwaukee M18 18-Volt Lithium-Ion Cordless Jobsite Fan can be powered by a M18 battery or the included power supply. This was designed to hold the power supply while the fan is not in use.

Print approx. €3.68–€4.50 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
218
Likes
33
Rating
4
P
PrintablesKlaus

Choke bowdencable screw / Befestigungsschraube Choker Seilzug - Mikuni BST33

After printing drill the 3,5 mm hole complety through the scrw, then cut of the flange (which is necessary for printing) and shorten to approx. 22mm.

Print approx. €0.52–€0.63 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
206
Likes
6
Rating
5
P
PrintablesH.Stephens

Native Instruments Maschine Mikro mk3 Stand

This model will support the NI Maschine Mikro mk3 on your desk, holding it up at a 20-degree angle in order to better see the LCD screen and buttons, and also making it a little more ergonomic for finger-drumming at arms-length. The…

Print approx. €4.94–€6.04 excl. taxPreliminary estimate for one variant

Downloads
191
Likes
17
Rating
5
P
Printablesdiego2255

Gniazdo do Formikarium

Projekt Gniazda Formikarium do hodowli mrówek. Gniazdo z systemem nawadniania przystosowane pod próbówkę fi16 oraz wentylowana jedna komorą. Projektowane na podstawie wieloletniej obserwacji zachowań mrówek hodowlanych. wejście do gniazda…

Print approx. €0.32–€0.39 excl. taxPreliminary estimate for one variant

Downloads
165
Likes
14
Rating
0
P
PrintablesPeter Farell

Hatsune Miku : Lego Like

Hatsune Miku : Lego Like

Print approx. €5.55–€6.79 excl. taxPreliminary estimate for one variant

Downloads
142
Likes
27
Rating
0
P
PrintablesCartoonishNerd

Foldable Print-in-place Phone Stand (Light Weight with Japanese Kumiko Pattern)

This project is a light weight phone stand. It is a print-in-place design that no assembling is needed. Also, the stand is foldable for easy carrying. In compared with my previous designs, this one reduced weight drastically by…

Print approx. €5.62–€6.87 excl. taxPreliminary estimate for one variant

Downloads
116
Likes
17
Rating
0
P
PrintablesFvones

Tiskátko do keramiky/těsta - včely / ceramic/dough stamps - bees

velikost se dá libovolně upravit ve sliceru ---------------------------- the size can be adjusted freely in the slicer

Print approx. €1.66–€2.02 excl. taxPreliminary estimate for one variant

Downloads
79
Likes
16
Rating
0

Barbie Table quadratic type Mikado

Print upside down with no support.

Print approx. €4.92–€6.01 excl. taxPreliminary estimate for one variant

Downloads
72
Likes
18
Rating
0
P
PrintablesLord Rosomak

Stativ pro mikroskop / Microscope stand

Stativ pro USB mikroskop, kombinace 3D tisku a dalších komponent. Hlavní sloup je dřevěný hranol 35 x 35 mm, dal by se nahradit i nějakým pevným tiskem. Posun pro zaostřování je řešen závitovou tyčí M8. --- Tripod for USB microscope,…

Print approx. €1.32–€1.61 excl. taxPreliminary estimate for one variant

Downloads
67
Likes
7
Rating
0
P
Printablesmatbcvo

MikroTik RB5009 mounting bracket

MikroTik RB5009 mounting bracket, can be installed either way (0 or 180 degrees) 4 x M4 nut and screw (length 40 mm) Recommended to sand with P120 sandpaper and then glue with epoxy glue

Print approx. €3.15–€3.85 excl. taxPreliminary estimate for one variant

Downloads
53
Likes
1
Rating
0
P
Printablesdiego2255

Poidełko dla mrówek FORMIKARIUM

Poidełko dla mrówek kompatybilne z próbówkami fi 16mm.

Print approx. €0.38–€0.46 excl. taxPreliminary estimate for one variant

Downloads
52
Likes
8
Rating
0
P
PrintablesMarynowane

Pick-Up Stick Game Bierki Mikado

Imported from: https://makerworld.com/en/models/413501#profileId-315509

Print approx. €3.20–€3.92 excl. taxPreliminary estimate for one variant

Downloads
42
Likes
1
Rating
0
P
PrintablesPaul Cobbaut

Kumiki cube - prism Y

Prism Y This is a remix of my Kumiki cube . It is basically the same as the original, but with the sides cut off along the Y-axis. This makes it a prism with eight sides. The original Kumiki cube can be cut along each axis. Here is a…

Print approx. €12.71–€15.53 excl. taxPreliminary estimate for one variant

Downloads
42
Likes
8
Rating
0

Kumiko RPG Dice Holder [Parametric]

A parametric RPG dice holder for 1d4, 1d6, 1d8, 2d10, 1d12 & 1d20, decorated with a stylish Japanese kumiko pattern. I designed this around the exact measurements of my Rime of the Frostmaiden dice set so the fit may not be ideal for your…

Print approx. €2.82–€3.44 excl. taxPreliminary estimate for one variant

Downloads
42
Likes
14
Rating
5
P
Printablesdiego2255

Miska karmidełko dla mrówek FORMIKARIUM

Miska na pokarm dla mrówek. Posiada uchwyt do wyciągania pęsetą.

Print approx. €0.06–€0.07 excl. taxPreliminary estimate for one variant

Downloads
37
Likes
5
Rating
0
P
PrintablesFvones

Tiskátko do keramiky/těsta - kůň / ceramic/dough stamps - horse

pro snadnějsí tisk odnímatelná rukojeť velikost se dá libovolně upravit ve sliceru ---------------------------- Removable handle for easier printing the size can be adjusted freely in the slicer

Print approx. €11.21–€13.70 excl. taxPreliminary estimate for one variant

Downloads
32
Likes
5
Rating
0
P
PrintablesPaul Cobbaut

Kumiki cube - prism X

Prism X This is a remix of my Kumiki cube . It is basically the same as the original, but with the sides cut off along the X-axis. This makes it a prism with eight sides. The original Kumiki cube can be cut along each axis. Here is a…

Print approx. €12.33–€15.08 excl. taxPreliminary estimate for one variant

Downloads
31
Likes
4
Rating
0
P
PrintablesJulianKoe

Mikrotik wAP Adapter Plate 1/4" Camera Connection - DIN 4503-1 / ISO 1222

Informations Designed a Adapter Plate for my Mikrotik wAP AC Access Point to mount on any Camera Equipment. I use it with a Small Rig 10" Arm and a Manfrotto Super Clamp. Work really well and is very stable. You need some small screws to…

Print approx. €0.70–€0.86 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
22
Likes
1
Rating
0
P
PrintablesJuda Kaleta

Úchytka kabelu na rameno mikrofonního stojanu BESPECO SH13NE

Úchytka kabelu na rameno mikrofonního stojanu BESPECO SH13NE.

Print approx. €0.37–€0.45 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
21
Likes
1
Rating
0
P
PrintablesPaul Cobbaut

Kumiki cube - prism Z

Prism Z This is a remix of my Kumiki cube . It is basically the same as the original, but with the sides cut off along the Z-axis. This makes it a prism with eight sides. The original Kumiki cube can be cut along each axis. Here is a…

Print approx. €12.38–€15.14 excl. taxPreliminary estimate for one variant

Downloads
18
Likes
2
Rating
0

Mouse Rato Mikas

Mouse Face Logo

Print approx. €1.55–€1.90 excl. taxPreliminary estimate for one variant

Downloads
13
Likes
5
Rating
0
P

Leg of the "Sharp R-200(IN)W" microwave / Bein der "Sharp R200 INW" Mikrowelle

Replacement leg of the "Sharp R-200(IN)W" microwave.

Print approx. €0.08–€0.10 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
11
Likes
1
Rating
0
P
PrintablesRealPrint

Hook for Ortlieb QL1 on a MIK luggage carrier / Haken für Ortlieb QL1 an einem MIK Gepäckträger

Die Original-Haken sind zu hoch, wenn man zusätzlich ein Topcase mit MIK (2.0) Halter auf einem MIK Gepäckträger befestigen möchte. Diese Haken ermöglichen das. Zusätzlich ein Haken für den größeren Durchmesser unten. The original hooks…

Print approx. €0.97–€1.18 excl. taxPreliminary estimate for one variant

Downloads
10
Likes
4
Rating
0
P
PrintablesDDM Šternberk

Vykrajovátka pro kroužek KERAMIKA

Sada vykrajovátek pro velikonoční výzdobu - ZAJÍC S MRKVÍ - z keramické hlíny návrh keramického výrobku a rozkreslení na jednotlivé díly kreslení dílů v TinkerCadu (Scribble) přenesení do formátu . stl úprava velikostí v PrusaSlicer…

Print approx. €1.64–€2.01 excl. taxPreliminary estimate for one variant

Downloads
4
Likes
0
Rating
0

Formikárium - školní mraveniště

Školní chov mravenců a poznání jejich biologie. Jednoduchý a základní model lze dotvářet či vytvořit dle základních pravidel vlastní. https://www.youtube.com/watch?v=gpg8jEsVtnI&t=3s

Print approx. €9.00–€11.00 excl. taxPreliminary estimate for one variant

Downloads
1
Likes
0
Rating
0
P
Printablesredfoxdude

Umikot (58mm Version) - Planetary Gear Spirograph Espresso WDT Tool

WDT is an art. Its chaotic nature takes skill to master consistently. Umikot is a Tagalog word which means: to spin; to turn around; to revolve; to rotate; to circle; to go around; to swirl; to gyrate. In that spirit, this 3D printable…

Downloads
25,049
Likes
4,179
Rating
4.95
P
PrintablesMeyui

Kumiko Pen Holder - Desk Organizer

Designed to enhance desktop storage efficiency, this pen holder combines an Elongated Hexagon shape with Kumiko-style , blending Japanese minimalism with practical aesthetics. Available in two size options Version A : 95 × 150 x 100 mm…

Downloads
17,134
Likes
4,132
Rating
4.93
P
PrintablesMeyui

Kumiko Pen Holder

A Kumiko-style pen Holder designed for your workspace. It features 9 compartments for storage , efficiently organizing different stationery and tools. Dimensions : 95 x 95 x 90 mm The slanted design makes grabbing tools more…

Downloads
8,747
Likes
2,229
Rating
4.58

Miku Hatsune - Vocaloid - Anime Fanart Toy

PRESUPPORTED - https://social.thangs.com/m/57128 Hatsune Miku (初音ミク), codenamed CV01, was the first Japanese VOCALOID to be both developed and distributed by Crypton Future Media, Inc.. She was initially released in August 2007 for the…

Downloads
8,059
Likes
973
Rating
5
P
Printablesredfoxdude

Umikot (54mm Version) - Planetary Gear Spirograph Espresso WDT Tool

WDT is an art. Its chaotic nature takes skill to master consistently. Umikot is a Tagalog word which means: to spin; to turn around; to revolve; to rotate; to circle; to go around; to swirl; to gyrate. In that spirit, this 3D printable…

Downloads
7,251
Likes
1,100
Rating
4.91
P
PrintablesMeyui

Kumiko Pen Holder - Desk Organizer / Superellipse

A Superellipse Kumiko-style pen holder designed for your workspace. It features 7 compartments for storage , efficiently organizing different stationery and tools. Dimensions : 95 x 95 x 95 mm The slanted design makes grabbing tools more…

Downloads
4,810
Likes
1,180
Rating
4.96
P
PrintablesXema

Mimik 10

Aquí tienes la traducción: This is a fully articulated, easy-to-print and easy-to-assemble figure at 1:10 scale. It is based on Carbon 13, with which it shares the legs and hips. The rest has been completely redesigned. All kinds of…

Downloads
3,728
Likes
1,107
Rating
4.7
P
PrintablesMeyui

Mini Desktop Bin / 2 Lid Design / Kumiko

Slope Can is a compact desktop bin that keeps your workspace tidy — whether it’s paper scraps, tools, or small essentials. Its gently slanted opening and refined Kumiko-patterned surface bring beauty and practicality to your daily setup.…

Downloads
3,210
Likes
1,114
Rating
4.97
P
PrintablesMeyui

Kumiko Holder for Post-It Notes with 8 Stencils

I noticed that sticky note boxes usually lack a lid design. To enhance portability, I designed an integrated lid that not only provides a new option but also makes carrying and storing sticky notes more convenient, while also…

Downloads
2,945
Likes
762
Rating
4.91
P
PrintablesMeyui

Kumiko Asanoha Lamp / 2 Versions / LED KIT 001

Here is the tall Japanese Shoji Lantern which is fully compatible with the Bambu Lab LED Kit 001 . Inspired by Japanese aesthetics, It's ideal for anyone who appreciates traditional Japanese design, creating a peaceful, zen-like…

Downloads
2,538
Likes
901
Rating
5
P
PrintablesTyler OO

Umikot V2 Breville 54mm Version - Planetary Gear Spirograph Espresso WDT Tool

I waited for a month for the original author to respond wether there will be a V2 for 54mm portafilters, and then decided to make my own. This is not a scaled model, but a re-computed one. Please follow the original Umikot instructions…

Downloads
2,185
Likes
278
Rating
4.96
P
PrintablesPatrickart.hk

Mike Wazowski(Monsters University)

Mike Wazowski(Monsters University)

Downloads
2,169
Likes
209
Rating
4.9
P
PrintablesFireDog

Microphone Voucher Box / Mikrofon Gutscheinbox

Ein Mikrofon mit Ständer und abschraubbarem Kopf zum Verschenken von Eventgutscheinen. A microphone with stand and unscrewable head for giving away event vouchers. Print instructions Gedruckt in PLA mit 0,2mm Schichtstärke. Länge: ca.…

Downloads
2,092
Likes
110
Rating
4.95
P
PrintablesMeyui

Kumiko Asanoha Lamp / 2 Versions / LED KIT 001

This design is inspired by the traditional Kumiko Asanoha pattern. I wanted to reinterpret it through a unique structure and super-elliptical form. Beyond preserving traditional aesthetics, hope to add new creative elements to traditional…

Downloads
2,089
Likes
796
Rating
4.89
P
PrintablesDr Swaster

Kumiko Chopstick Storage Box

A replacement for my original chopstick storage box. I added the Kumiko to give it a more traditional look. Prints with no supports and 100% infill. Internal box dimensions are: Small Box 260x35x20mm, Large Box - 260x65x20mm Update! Added…

Downloads
1,870
Likes
955
Rating
4.92
P
PrintablesCorneel

Umikot La Pavoni 51 mm

A remix of the 54 mm Umikot for the 51 mm post-millenium La Pavoni filterholder. See the 54 mm version for instructions. The basketdepths are: Standard double: 26 mm IMS 14-16gr: 25 mm (not tested yet!) IMS 16-20gr: 29 mm (not tested…

Downloads
1,582
Likes
180
Rating
4.9
P
PrintablesOwny

Mike – Funko POP! figure, from Stranger Things

Usage: Collectible decoration Humorous gift or parody piece Custom addition to a Funko Pop–style collection Print Recommendations: Suggested scale: ~1:18 (around 10 cm tall) Print with supports (especially for the head and arms)…

Downloads
1,386
Likes
135
Rating
5
P
PrintablesI_make_things

Hatsune Miku keychain with color swap (dual color)

I literally know nothing about the character other than the fact my friend liked the desing Also found someone who charged 10$ for the design so had to make it myself (and make it free of course) You can print this in 2 colors be posing…

Downloads
1,363
Likes
127
Rating
5
P
PrintablesAiz G

Beis Hamikdash

The Beis Hamikdash Print Settings 20%+infill Brim if needed Supports, add support blockers if you printer can bridge well. Assembly Take out all of the supports and you're done.

Downloads
1,355
Likes
54
Rating
5
P
PrintablesThinAir3D

Mike Rockowski (The Rock + Mike Wazowski) - Support Free

Remixed from: https://www.prusaprinters.org/prints/32751-dr-smolder-bravestone-dwayne-johnson & https://www.thingiverse.com/thing:1088238 If you would like to support my work or have access to ALL of my files you can consider joining my…

Downloads
1,294
Likes
107
Rating
3.67
P
Printablesderek

Rummikub Tile Stand

A simple Rummikub tile stand/holder with 4 slots, 9"x4.5"x1.25". Recommend printing at 0.20mm, 5%+ infill (10% under slots), no supports/brim. 3mf file provided for ease

Downloads
1,277
Likes
113
Rating
4.88
P
PrintablesGoatGamez

Dynamike - Brawl Stars

Dynamike is an old miner and prospector who's become obsessed with explosions. Nothing makes him happier than a big boom!

Downloads
1,259
Likes
60
Rating
5
P
PrintablesMeyui

Kumiko Superellipse Bonsai Planter with Legs

With this version, the planter has been upsized to 125mm (4.5") , making it suitable for a wider variety of plants. The form remains true to its design roots, elevated by a base inspired by traditional Japanese stone lanterns . The base…

Downloads
1,206
Likes
538
Rating
5

Miku Hatsune - Vocaloid - Anime Fanart Toy

PRESUPPORTED - https://social.thangs.com/m/57128 Hatsune Miku (初音ミク), codenamed CV01, was the first Japanese VOCALOID to be both developed and distributed by Crypton Future Media, Inc.. She was initially released in August 2007 for the…

Downloads
1,085
Likes
163
Rating
5
P
PrintablesNatanel Benzaki

Mikolas' Guitar Pick collection - Beveled and Rounded

Same picks as Mikolas' but with a slight bevel or fillet all around the pick. This gives a more “on point” and deep sound and is more comfortable in my opinion. There's also a travel pick card for these picks here:…

Downloads
1,048
Likes
63
Rating
5
P
PrintablesSarec

Magnetic pottery stamps / magnetická razítka na keramiku

EN - English A set of stamps designed for ceramic production. These stamps are created with an emphasis on easy of use and flexibility. A magnet is integrated behind the 0.2 mm layer of both parts of the stamps, allowing the printing part…

Downloads
1,040
Likes
394
Rating
4.29
P
PrintablesJefflynn

Mimikyu - low poly (pokemon)

Mimikyu - low poly (pokemon) Let me know which Pokémon you'd like me to make next!

Downloads
1,018
Likes
141
Rating
5
P
PrintablesMicro Center

Hatsune Miku Cosplay Headphones

Hatsune Miku Cosplay Headphones They are glue in place with color separated details that can be used for lighting and accents. Heat forming the headband may be needed to get them to fit comfortably. Inland Filament Used: Black PLA Pink…

Downloads
998
Likes
167
Rating
4.5
P
PrintablesDerHansen

Mikrofonhalter für Motorola Funkgerät Feuerwehr

Mikrofonhalter für Motorola Funkgerät Feuerwehr 0,2 Layer Wall 4-5 45% Infill 4 Untere und obere Schale

Downloads
995
Likes
42
Rating
5
P
PrintablesMeyui

Kumiko Bonsai Planter with Legs (Rectangle)

Inspired by traditional Japanese design, this planter features an elegant Kumiko pattern, complete with a drip tray, sturdy legs, and a decorative outer shell. The plant's water tray has a small hole, making it easier to check the…

Downloads
976
Likes
458
Rating
5
P
PrintablesKevin Wong

Umikot All In One Needle Cutting Guide and Bending Tool

An all in one needle cutting guide and bending tool for redfoxdude 's popular Umikot (58mm Version) - Planetary Gear Spirograph Espresso WDT Tool . It's uses the needle length (35/25mm) as the reference, so it's compatible with both the…

Downloads
946
Likes
92
Rating
5
P
Printableselmoserafa

Umikot 51s

The stl files work for my case, in you'll need (in addition to the materials pointed out by redfoxdude) 4 3x10x4mm bearings (pressfit into spinring) and about 40x 4mm ball bearings. EDIT: forgot to mention I also incorporated heatset…

Downloads
902
Likes
90
Rating
4.8
P
PrintablesOmer Meshy

Rummikub stand leg

Stand leg for Rummikub

Downloads
840
Likes
20
Rating
5
P
Printablestrevor229

Hatsune Miku Hair Clip Accessory

I wanted to make my own version that is freely available for anyone to use and customize for their Miku cosplay The main size of these is 80x80mm OD, ~70x70mm ID and 18mm thick. If a different size is desired, scale everything to maintain…

Downloads
808
Likes
84
Rating
5
P
PrintablesElizabeth3D

Hatsune Miku – Anime Figure

Want to sell prints of my original designs? A commercial license (fan art and trademarked characters not included) is available on my Patreon: https://www.patreon.com/Elizabeth3D Like my free models? Support me on Ko-fi:…

Downloads
787
Likes
210
Rating
5
P
Printablesguichiang

Rummikub tile

This is a remix from the original rummikub game. Number of pieces: 106x Base 2x Numbers sequence (1 ~ 13) of each color (4x colors) - total 104x 2x coringas (normal or 9 3/4) This design doesn't require glue to connect the pieces. Take…

Downloads
760
Likes
158
Rating
4.92
P
PrintablesKolbi

Christmas Cookie Biscuit Gingerbread Cutters (vykrajovátka na sušenky perník Vánoce) Part_01 9Pcs, Gingerbread Man (Reindeer) Panáček Sob, Glove Rukavice, House, Christmas Sock, Lollipop, Santa Claus Mikuláš, Sleigh Saně, Snowflake Vločka, Star Hvězda

Christmas Cookie Biscuit Gingerbread Cutter (approx 85 mm) You can change scale in the Fusion 360 File in Parameters Table, for make the cutters bigger (X and Y axis), without to increase the wall thickness. (See attached picture with…

Downloads
745
Likes
66
Rating
5
P
Printablesdynmic

Tamping station for Lelit 58mm portafilter (+ Umikot compatible version)

A tamping station compatible with Lelit 58mm portafilters (PLA580*) for the Lelit Glenda and similar espresso machines. There are two versions, one is a simple tamping station with slots for the ears of the portafilter and the other is…

Downloads
739
Likes
78
Rating
5
P
Printablesredfoxdude

Umikot - No Countersunk Screws Parts Planetary Gear Spirograph Espresso WDT Tool

Alternative parts for Umikot - Planetary Gear Spirograph Espresso WDT Tool These are versions of the Handle and Spin Ring parts without the countersink. This allows the use of non-flathead/countersunk screws. enable support for the handle…

Downloads
737
Likes
43
Rating
5
P
PrintablesMeyui

Kumiko Bonsai Planter with Legs

Inspired by traditional Japanese design, I plan to design a series of Japanese bonsai. This planter consists of three components: the main bonsai vessel featuring a Kumiko pattern, a detachable drip tray, and supporting legs incorporating…

Downloads
726
Likes
324
Rating
5
P
Printablesafhfaklsj dfda
Downloads
719
Likes
67
Rating
5
P
PrintablesSASSy Design

Kumiko Plant pot and Planter - Vase mode design

A plant pot inspired by the Kumiko style wood decor theme. Print information: Recommended vase mode or semi-vasemode settings (0% infill, 0 top layers, 4 or 5 bottom layers, 2 or 3 outer perimeters - for a stronger print) Recommended…

Downloads
690
Likes
222
Rating
5
P
PrintablesMechnificent

Spare support leg for Rummikub tile board

I made and printed this model for an acquaintance because their original set of was missing one leg and over years of usage, the crossed slots in the boards have been worn out a little causing the legs to fall out at the slightest nudge.…

Downloads
679
Likes
30
Rating
4.5
P
Printablespdz

MIKE - Bicycle Mount Generator - Bike Connector Tool

Tired of searching for the perfect bike connector, only to find that nothing really fits your setup? - Look no further! We are a research group at ETH Zürich and are currently developing a free online bike mount generator . With MIKE, you…

Downloads
660
Likes
800
Rating
5
P
PrintablesTaro Hayashi

Miku & Teto hair for DUMMY13

DUMMY 13 Printable Jointed Figure © 2023 by Lucky 13 Toys is licensed under CC BY 4.0 The use of Hatsune Miku & Kasane Teto is based on a PCL license .

Downloads
639
Likes
194
Rating
5
P
PrintablesHK721

Umikot 51 mm base for Delonghi Dedica

Remixed base for Delonghi Dedica EC685 bottomless portafilter with 26mm IMS Filter Basket

Downloads
635
Likes
73
Rating
5
P
Printableskmaus

Mimikyu

Thank you for printing my models. It means very much to me! Some 3D printed models from this community have put a much-needed smile on my face on some days. So I hope I can make my contribution and delight you with my creations. If you…

Downloads
632
Likes
60
Rating
5
P
PrintablesPotted Pork

Mikrotik hEX S router DIN rail mount

DIN 35 rail mount for a Mikrotik hEX S router Mounts on edge with ports facing forward. Integral clip to snap onto a DIN 35 rail. Router snaps into bracket without requiring fasteners. Design: Clip design based on…

Downloads
629
Likes
51
Rating
5
P
PrintablesPluralMakes

MiKA3D 500g spool extender for Bambu Lab X1 AMS

The original design doesn't fit MiKA3D's 500g spools correctly, so I modified the tabs so they're easier placed on these spools.

Downloads
585
Likes
43
Rating
5
P
Printablesmodsmthng

Umikot Flair Pro 2 rework (spirographic wdt tool) Umikot Flair Pro 3 rework

This is a remix of the great Umikot by @redfoxdude https://www.printables.com/de/model/481587-umikot-58mm-version-planetary-gear-spirograph-espr (more remix information at the end). How to use: Use the printed funnel (base) and pour the…

Downloads
585
Likes
85
Rating
5
P
PrintablesMilhause

Hatsune Miku

Hatsume Miku is Popular Vocaloid I recommend You SLA or DLP printer for this print Category: Sculptures

Downloads
571
Likes
51
Rating
0

Kumiko-style lamp

Found this style of lamps on youtube. Wanting one for my living room, but having no woodworking skills to speak of, I threw this together. The lamp is compatible with a EU E27 style connector w. lock ring. It should be large enough to…

Downloads
561
Likes
203
Rating
5
P
Printableschk230

Hatsune Miku 3d Model

Hatsune Miku fun 3d model. (single color)

Downloads
555
Likes
26
Rating
0
P
PrintablesPatrickart.hk

Mike Wazowski(Monsters University)

Mike Wazowski(Monsters University)

Downloads
531
Likes
96
Rating
5
P
PrintablesLowd14

Kumiko Plates

This remix is my version of the plates in form of Kumiko ! Kumiko is an ancient Japanese woodworking (skill) to create panels by assembling small parts of wood without nails, just glue and geometry ! Enjoy this version of mine thanks to…

Downloads
525
Likes
79
Rating
5
P
Printablesmseidler

Mikrotik RB5009 10 Inch Rack Mount

Rack mount bracket for the Mikrotik RB5009 which can be used to mount the router to a 10 inch rack with 0.5 height units. M4 screws are needed to mount the brackets to the router. Remixed an existing model and changed the horizontal…

Downloads
515
Likes
47
Rating
4.5
P
PrintablesJonan Seeley

minirummi: Travel-Sized Rummikub

minirummi: Travel-Sized Rummikub minirummi is a compact, travel-sized version of the classic tile-based game Rummikub. In Rummikub, players strategically arrange numbered tiles in runs and sets, aiming to be the first to use all their…

Downloads
509
Likes
75
Rating
5
P
Printablesguichiang

Rummikub stand/box

I recomend to use lubricate the moving parts The design don't require screw. You can choose to print the stand for my custom tiles, or print the larger on to use with the original Rummikub. print all the mirror and non mirror parts

Downloads
505
Likes
106
Rating
4.75
P
PrintablesKarolTheGuy

Mikrotik CCR Rackmount Ears and Screws - EARS/K-10

Mikrotik router/switch ears for rackmount since they are so difficult to buy. Fits my CSS326-24G-2S+RM no issue and should fit other router/switches from Mikrotik The distance between the holes is 25mm.

Downloads
502
Likes
33
Rating
5
P
Printablesemeremnd

Switchblade 300 Kamikaze Drone

This is a completed model of U.S Aerovironment Switchblade300, It is capable of delivering 300gm of payload. (This project is for educational purpose only) Download complete files from Cult3D https://cults3d.com/:1960170…

Downloads
496
Likes
35
Rating
0
P
PrintablesMeyui

Kumiko Drawer Riser for iPad/ Tablet Stand

Enhance your workspace with this functional and stylish iPad Stand Drawer Riser. Designed to integrate perfectly with the original design - iPad Stand Riser. Optimal Viewing Angle: features a 2-degree tilt, ensuring a comfortable and…

Downloads
472
Likes
171
Rating
5
P
PrintablesvmLOGIC

Modified MIK adapter plate suitable for Ortlieb rear pannier bags

Motivation (english) I use the MIK system on my bike, which allows you to clip anything onto the rack. But it is annoying that you cannot use the MIK adapter plate with Ortlieb pannier bags at the same time. The design of the MIK adapter…

Downloads
471
Likes
53
Rating
4.88
P
Printableselli0286

Improved Rummikub Rack Holder

My original Rummikub game only came with four racks/holders, but we often would like to play with five or six people. So I improved upon the original design by making it more sturdy. The original game came with enough tiles to allow for…

Downloads
468
Likes
18
Rating
5
P
PrintablesClamikra

Crank Remix for the Bambu Re-Spooler by Miklos Kiszely

A crank with longer shaft for manual re-spooling when the hexagon adaptor for an electric drill is in place. With this crank you can turn the spool manually even when the electric drill adaptor is installed. The normal crank will collide…

Downloads
468
Likes
63
Rating
5
P
PrintablesHeikit

JBL Partybox 320 Microphone Holder - JBL Partybox 320 Mikrofon Halterung

I recommend printing it in PETG The first version closes relatively flat at the top (e.g. if the party box is to be pushed under a table), the second version “mic higher” places the microphones higher. It would be nice if you post your…

Downloads
465
Likes
31
Rating
5

Miky's Family

Miky's Family

Downloads
459
Likes
180
Rating
4.67
P
Printablesjk_printer

miniDSP UMIK-1 microphone shock mount

An isolating shock mount for the miniDSP UMIK-1 measurement microphone. The mount is intended to be installed on a monopod, tripod or selfie stick with a ¼" or 3/8" screw. It isolates the microphone from a broad range of vibrations, which…

Downloads
454
Likes
54
Rating
5
P
PrintablesKeepy

MikroTik Hex and Haplite Rack Mount Holder

Introducing the MikroTik Hex and Haplite Rack Mount Holder, the perfect solution for seamlessly organizing and safeguarding your valuable network devices. Designed to securely hold your MikroTik Hex and Haplite routers, this rack mount…

Downloads
453
Likes
29
Rating
4.25

Domino / Tile / Rummikub Rack Scalable 🁴

100% scale pictured below, good for scrabble and rummikub

Downloads
440
Likes
82
Rating
4.83
P
PrintablesAritz

mike y sully

figura de Mike y Sully

Downloads
435
Likes
48
Rating
0
P
Printables3DP_Park

MIKU ( no support )

MIKU ( no support ) Category: Fashion

Downloads
423
Likes
34
Rating
3