22 models
Just a simple tool to set the correct height of the Pinda or Minda probe. Yes i know this is also the thickness or a simple calbe-tie! But i ran out of those so this little print came to the rescue. Print instructions Just print at 0.2 mm…
This is an excellent modification by enganear to the cable management on the Prusa mini to relieve the stress on the hot end cables Go to the website for more detail https://www.thingiverse.com/thing:4082541 Print instructions Printer:…
This optimized Prusa Mini MINDA-holder manages the heater cables more loosely in the space between the minda holder part and cooling fan. Even without the second screw in place, the part doesn't bend outwards like the original minda…
Simple edit for the MINDA probe mount to add a heat shield to help prevent the hotend from heating up the probe, since it does not have a thermistor (Like the PINDA V2 on the MK3S) to compensate for it heating up during long days of…
This is a REMIX of the excellent cable management adapter by clivebradshaw & enganear. Their versions didn't fit my Prusa Mini the way that I would have liked it to, so I decided to do some modifications to their design to fit my printer.…
Hot end clogs on the mini are attributed to heat creep and poor PFTE setup. I've managed to fix this issue by not installing a aftermarket heat break but by adding better heat paste and re-routing the hot end - thermister and heater…
I noticed that the original holder pinched on the hotend cables an uncomfortable amount, thus I modified it to give them much more space and cleaned up some weird geometry. The duct design is unchanged. Mounting still requires an M3x8…
I have modified the original holder to fit the Fan Duct. I have mounted the left screw to countered it on the other side with a nut.
Just a simple block that allows the quick adjustment of a Pinda/Minda sensor to 1mm from nozzle tip. No zip tie needed and you don't need to run the Z all the way to the bed. Place vertically on heat bed and run Z down to where the nozzle…
Remix of the original R2 part inspired by the first revision of https://www.printables.com/model/247005 design with M3 heat set insert. This model made from original step file for M3x5x4 heat set inserts. .step and .stl - files are…
I didn’t like the cable management from the original holder, so I modified it a bit. Now the cables are not pressed so much upwards and are also going a bit more to the side (what should help with the airflow). This fits perfectly on my…
Original part was making a lot of strain on hotend cables. So I modified it to allow more space for cables I recommend printing it in ABS/ASA/PETG etc. 100% infill, 3 perimeters, 0.15mm layer.
This is v2 of my previous REMIX of the excellent cable management adapter by clivebradshaw & enganear. Their versions didn't fit my Prusa Mini the way that I would have liked it to, so I decided to do some modifications to their design to…
Swiatełko co świeci na stół, ambitne i wybitne aczkolwiek i proste.
Update : Sine I could find no easy reliable way to controll the brightness of the “running light” mode on these I designed some light shrouds that cab snap on securly that then can be adusted to block the light from the rider. I designed…
Hier ein modifiziertes Bauteil des Mini Stealthburners mit der Halterung für Induktive Sensoren wie MINDA oder PINDA. Benötigte Materialen: 1 x M3x10 Screw
This is inspired by Infantryman's Offset Minda Mount. It was recreated from Prusa's R4 Minda Mount. This one has the hole for the Minda centered within the clamp. The Minda has been moved 3mm toward the front of the printer to compensate…
Probe holder for MINDA or any other 8mm probe. [!!!DISCLAIMER This is a remix from a probe holder from Thingiverse(by Johan Grahn )!!!] Printables didn't accept the creator.
files to create the Mindaffect BCI headset yourself. print both spring pieces in tpu. print either the v1.2 or 1.3 main and vertical piece in tpu. print the electrode disc and nib in pla optionally scale the nib and disc in your slicer to…
These are the files for the MindAffect BCI headset based on TMSi water based electrodes. Further documentation can be found here: https://github.com/mindaffect/Headset Added next iteration with integrated electrodes: Print "disc_holder"…
It helps to remove the stress form the PINDA cable. Mine broke two times before using this… I removed the added Prusa hex flare from the model of Dakar to make it easier and faster to print with PETG.
you will need 3 m3*h3 heat inserts and 2 m3x12 countersunk screws to mount this, works best with the fan mount, duct and bltouch mounts from here: https://www.thingiverse.com/thing:5202213
