MINI+ minda S.P.I.N.D.A holder stress relief and better airflow for stock and dragon hotend
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
mini+ minda holder for stock and dragon hotend. It reliefs the stress on the cables and helps with the airflow
- Rating
- 5 / 5
- Likes
- 9
- Downloads
- 74
- Makes
- 4
- Views
- 527
- Reviews
- 3
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- GNU General Public License v2.0
I didn’t like the cable management from the original holder, so I modified it a bit. Now the cables are not pressed so much upwards and are also going a bit more to the side (what should help with the airflow). This fits perfectly on my dragon and on my stock hotend - the mini is now back again as a work horse
blue: original design
white: my design
I made two versions
- V1-A (tested): The one on the picture that I use (tested). It works perfectly, even if it looks a bit thin. I printed it with the standard 0.2mm settings for generic PetG. You could add some perimeters if you want extra durability (in my opinion no need for it)
- V1-B (not tested): Here I thickened the part a bit so it will be stiffer. This was designed when part V1-A was printed as a prototype. Even If I didn’t use it, I release it just in case, somebody wants to use the thicker version (on your own risk).
Tested with:
- dragon hotend mount from Sebastian - works perfect
- dragon hotend mount remix (my own design) - works perfect
- Stock hotend (01.August 2022) - works perfect
I hope this helps others too. Feel free to remix it or adjust it to your own need. If you have some inputs on how to improve it, just write me a message.