MINI+ minda S.P.I.N.D.A holder stress relief and better airflow for stock and dragon hotend
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
mini+ minda holder for stock and dragon hotend. It reliefs the stress on the cables and helps with the airflow
- Ocena
- 5 / 5
- Polubienia
- 9
- Pobrania
- 74
- Wydruki
- 4
- Wyświetlenia
- 527
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- GNU General Public License v2.0
I didn’t like the cable management from the original holder, so I modified it a bit. Now the cables are not pressed so much upwards and are also going a bit more to the side (what should help with the airflow). This fits perfectly on my dragon and on my stock hotend - the mini is now back again as a work horse
blue: original design
white: my design
I made two versions
- V1-A (tested): The one on the picture that I use (tested). It works perfectly, even if it looks a bit thin. I printed it with the standard 0.2mm settings for generic PetG. You could add some perimeters if you want extra durability (in my opinion no need for it)
- V1-B (not tested): Here I thickened the part a bit so it will be stiffer. This was designed when part V1-A was printed as a prototype. Even If I didn’t use it, I release it just in case, somebody wants to use the thicker version (on your own risk).
Tested with:
- dragon hotend mount from Sebastian - works perfect
- dragon hotend mount remix (my own design) - works perfect
- Stock hotend (01.August 2022) - works perfect
I hope this helps others too. Feel free to remix it or adjust it to your own need. If you have some inputs on how to improve it, just write me a message.