P
Printables
Simple Minda-Pinda cable guide
It helps to remove the stress form the PINDA cable. Mine broke two times before using this… I removed the added Prusa hex flare from the model of Dakar to make it easier and faster to print with PETG.
Search results: minda
Counting matching models…
P
Printables
Prusa Mini Minda 3mm Offset
This is inspired by Infantryman's Offset Minda Mount. It was recreated from Prusa's R4 Minda Mount. This one has the hole for the Minda centered within the clamp. The Minda has been moved 3mm toward the front of the printer to compensate…
P
Printables
Pinda/Minda Height Adjustment Block - 1mm
Just a simple block that allows the quick adjustment of a Pinda/Minda sensor to 1mm from nozzle tip. No zip tie needed and you don't need to run the Z all the way to the bed. Place vertically on heat bed and run Z down to where the nozzle…
P
Printables
Prusa Mini Minda Saver (Cable Guide)
This is an excellent modification by enganear to the cable management on the Prusa mini to relieve the stress on the hot end cables Go to the website for more detail https://www.thingiverse.com/thing:4082541 Print instructions Printer:…
P
Printables
MINI+ minda S.P.I.N.D.A holder stress relief and better airflow for stock and dragon hotend
I didn’t like the cable management from the original holder, so I modified it a bit. Now the cables are not pressed so much upwards and are also going a bit more to the side (what should help with the airflow). This fits perfectly on my…
P
Printables
Prusa Minda\Pinda cable guide v2
This is v2 of my previous REMIX of the excellent cable management adapter by clivebradshaw & enganear. Their versions didn't fit my Prusa Mini the way that I would have liked it to, so I decided to do some modifications to their design to…
P
Printables
Optimized Prusa Mini MINDA holder for stress relief
This optimized Prusa Mini MINDA-holder manages the heater cables more loosely in the space between the minda holder part and cooling fan. Even without the second screw in place, the part doesn't bend outwards like the original minda…
P
Printables
Pinda and Minda probe height adjustment tool
Just a simple tool to set the correct height of the Pinda or Minda probe. Yes i know this is also the thickness or a simple calbe-tie! But i ran out of those so this little print came to the rescue. Print instructions Just print at 0.2 mm…
P
Printables
mounting plate for biqu h2 v2 for minda d3
you will need 3 m3*h3 heat inserts and 2 m3x12 countersunk screws to mount this, works best with the fan mount, duct and bltouch mounts from here: https://www.thingiverse.com/thing:5202213
P
Printables
Anet a8 MINDA 8mm probe Mount
Probe holder for MINDA or any other 8mm probe. [!!!DISCLAIMER This is a remix from a probe holder from Thingiverse(by Johan Grahn )!!!] Printables didn't accept the creator.
P
Printables
Prusa mini MINDA / SPINDA mount with more clerance for hotend cables
Original part was making a lot of strain on hotend cables. So I modified it to allow more space for cables I recommend printing it in ABS/ASA/PETG etc. 100% infill, 3 perimeters, 0.15mm layer.
P
Printables
Prusa MINI/MINI+ MINDA holder with cable stress relif and M3 heat set insert
Remix of the original R2 part inspired by the first revision of https://www.printables.com/model/247005 design with M3 heat set insert. This model made from original step file for M3x5x4 heat set inserts. .step and .stl - files are…
P
Printables
Prusa Mini RHD Fan Duct Rev. C 3D IMPROVED MINDA HOLDER
I noticed that the original holder pinched on the hotend cables an uncomfortable amount, thus I modified it to give them much more space and cleaned up some weird geometry. The duct design is unchanged. Mounting still requires an M3x8…
P
Printables
Prusa Mini MINDA Heatshield
Simple edit for the MINDA probe mount to add a heat shield to help prevent the hotend from heating up the probe, since it does not have a thermistor (Like the PINDA V2 on the MK3S) to compensate for it heating up during long days of…
P
Printables
Prusa-mini-lamp=>>MINI-minda-holder-led-lamp
Swiatełko co świeci na stół, ambitne i wybitne aczkolwiek i proste.
P
Printables
Mini Stealthburner Cowling MINDA Halterung Mount
Hier ein modifiziertes Bauteil des Mini Stealthburners mit der Halterung für Induktive Sensoren wie MINDA oder PINDA. Benötigte Materialen: 1 x M3x10 Screw
P
Printables
Mindaffect BCI headset v1.2 and 1.3
files to create the Mindaffect BCI headset yourself. print both spring pieces in tpu. print either the v1.2 or 1.3 main and vertical piece in tpu. print the electrode disc and nib in pla optionally scale the nib and disc in your slicer to…
P
Printables
MindAffect BCI Headset for water based electrodes
These are the files for the MindAffect BCI headset based on TMSi water based electrodes. Further documentation can be found here: https://github.com/mindaffect/Headset Added next iteration with integrated electrodes: Print "disc_holder"…
P
Printables
Prusa Minda\Pinda cable guide
This is a REMIX of the excellent cable management adapter by clivebradshaw & enganear. Their versions didn't fit my Prusa Mini the way that I would have liked it to, so I decided to do some modifications to their design to fit my printer.…
P
Printables
MINI-minda-holder with 3 deg offset.
Hot end clogs on the mini are attributed to heat creep and poor PFTE setup. I've managed to fix this issue by not installing a aftermarket heat break but by adding better heat paste and re-routing the hot end - thermister and heater…
P
Printables
Prusa Mini original minda holder mod for E3D V6 Hotend Fan Duct
I have modified the original holder to fit the Fan Duct. I have mounted the left screw to countered it on the other side with a nut.
P
Printables
70mm BMW Illumindation "puck"
Update : Sine I could find no easy reliable way to controll the brightness of the “running light” mode on these I designed some light shrouds that cab snap on securly that then can be adusted to block the light from the rider. I designed…