The source marked this model as adult content.
- Downloads
- 49,247
- Likes
- 12,541
- Rating
- 4.75
20,802 models
The source marked this model as adult content.
Use 3 walls, 25% infill. A simple drill-powered mixing attachment designed for stirring paint, coatings, resin, pigments, adhesives, and similar liquids directly inside cans or containers. The mixer attaches to a standard drill and helps…
This is a two part stirrer, the stirrer itself and the shaft. You'll need an m5 bolt (40mm or so) to screw the stirrer into the shaft. You can customize the shaft length by non-uniformly scaling the X axis longer. I printed the shaft…
This is a remix of Crafty Sven's excellent articulated Guardian. Just like the original, it prints without supports. When I first printed the original model, I was honestly surprised that the head isn't designed to move - because most of…
Updated Threaded Rod Model to remove extra shell which was causing slicing issues for some. New “v2” version will work with the original Nut but I added a v2 Nut just in case there is confusion. This is a remix of a remix of a remix. The…
Instructions by Printium 3D For Iron Man, you should be printing the outer armor in Iron Red and Gold filament. I choose to use PLA instead of the recommended PETG because I got more model detail from the PLA. I did use galaxy black PETG…
Remix of "Wave Puzzle 7" by ThinkingPegasis. ( https://www.thingiverse.com/thing:3739933 ) Changes and/or improvements over the original: Thicker pieces Pre-flipped a few of the tiles to not give the solver a hint based on the surface…
The model includes three versions with color painting - 5T with ColorMix, and 4/8T version with solid colors. ColorMix version The five-tool version (red chameleon in the sample pictures) takes advantage of Prusa ColorMix, creating new…
Perfect gift for Mother's Day Presente perfeito para Dia da Mãe Regalo perfecto para el Día de la Madre If you like my work consider Buy me a coffee 😊
I saw the super cool print in place box by DrJones and i wanted to try to make it so only I can open it. Print it with low filament flow so the parts dont get stuck together. (All redy set to low flow in the g.code) All box sizes are the…
Round version of the eye is added Project file added G-code file added
I printed in PLA Infill: 15% Layer Height: 0.10mm Supports: Yes, organic - Support from build plate only Seam: Rear/Back If you like my work consider Buy me a coffee 😊 Check ou my other cute keychain
A compact, stackable disposable mixing pad with a small integrated spatula, designed for mixing epoxy, resin, glue, and other adhesives. Quick to print and using only a few grams of filament, this model is perfect for fast workshop use…
Update 12-06-2025: Added V2 of the controller holder. Removed tiny overhangs from the front pattern, that pushed through the bottom surface. Bottom surface should lay completely flat now! ---------- We bought our Nintendo Switch in the…
This version is fixed to the Ender 3 v2 X-Carriage using the two upper roller wheel screws instead of the BLTouch mounting holes. Remixed from: Biqu H2 Mount + Cover - Ender 3 CR10 https://www.thingiverse.com/thing:4740250 BIQU H2 Ender 5…
“Never miss a beat (or a bathroom break)!” “Mix & Relief – Spin tracks, not your bladder!” “The Bathroom Line is longer than your setlist!” 🎧 The Problem: Every DJ has been there. You’re in the middle of an electrifying set, the crowd is…
I printed in PLA Infill: 15% Layer Height: 0.10mm Supports: Yes, organic If you like my work consider Buy me a coffee 😊
You can print one set in proper colors and the other in shiny versions - or dont, I'm not even your real dad.
Compact Remix of my High pressure nozzle to clean your pool filter cartridge from inside out. There are several commercial cartridge cleaners available. But all those just try to clean in the same direction as the dirt entered the filter.…
Purpose The Prusa Core One (+/L) frame's sheet metal parts do not form an air-tight and dust-proof seal in the top corners. The present corner plug remedies that shortcoming. Features Unobstrusive design Does not need magnets but snaps…
It's a remix of the Big Einsy Case cover with hexagonal holes and Prusa logos. Big Einsy Case HoneyComb remix also available : https://www.prusaprinters.org/fr/prints/67408-big-einsy-case-honey-comb-remix Big Einsy Case HoneyComb remix…
Please be aware, that these types of knives are prohibited in Canada. This is a minor remix of the trunnions which now include printed threads. There are 2 versions of the trunnions available. One set which looks similar to the originals,…
Suggested print settings: Layer height 0.2mm. Infill 50%. Perimeters: 5 (for strength). No supports needed. More durable when printed using PETG. Assembly The components fit together using a friction-fit mechanism. Push the "Lock" piece…
Captain Jack Sparrow from Pirates of the Caribbean with base.
Suggested print settings: Layer height 0.2mm. Infill 15%. Perimeters: 5. No supports are needed. Print-in-place.
Prusa ColorMix is a color model and slicing tool implemented in EasyPrint and Prusa Slicer. It allows you to create colors that you don't have physically loaded on your printer. Read more in our release article . There are three…
Put it on your table or make it mobile by using 4x lorenkrampe to mount it on G scale log car wheelbase ( https://www.printables.com/de/model/335862-log-car ) How to build it: Put gestell2 into the slots of gestell1. Push Schwenktrieb…
Design Concept This 4 Ring Gyro Fidget Keychain is a compact and portable remix design meant to provide a calming fidgeting activity. Circular rings nest inside each other, offering a smooth spinning effect. Use Ideal for stress relief…
Recommended print settings: Material: PETG Layer Height: 0.20 Infill % : 15 Supports: No Print Orientation: Default as modeled. As seen on Jelle Romers video: And article:…
Minimal remix of @Dingezzz remix of the 1-30mm Radius Gauges by @Restoredoctor. Reduce the filament use of the original model by 52,8% from 225,72 to 106,38 Three prearranged build plates in 3mf and stl format for all tiles with correct…
Overview: Looking for a tough, practical way to carry and protect your eyewear? This remix of the Flexi Glasses Case is now part of my RangeVault series—designed for Everyday Carry (EDC) durability and convenience. Whether you’re on the…
I designed this mixer to fit into a 10mm chuck. The total length is 160mm and the base diameter is 57mm. recommended material is PETG, with 25% infill and 3 Perimeters. Edit Added a second slightly bigger and improved version, with…
Here is a new remix of the fabulous Big Einsy Case designed by Boogie. Having already redesigned the cover with a honeycomb pattern, I figured that a remix of the case with the same pattern could make a cool bundle. I also drilled the…
German: Dieser Adapter ermöglicht die Verbindung von Duplo-Steinen mit Holzeisenbahnschienen, ideal für den Bau von Brücken und Abhängen. Der äußere Zapfen wurde modifiziert, um auch auf einen Duplo-Stein zu passen. Verbesserungen:…
This is a remix of mdkendalls successful “2,5” Three Jaw Chuck" for mounting on a Revopoint dual-axis turntable. The chuck can be mounted on the turntable with M6x8 countersunk screws or with the screws developed by Whitehawk2000 . From…
This is a slight modification (added text, print settings, etc) and print preparation for printing your own 3D Printing Settings sample box featuring various Infill types, Finish types, and Surface pattern types. The following Patterns…
MobyDisk's OpenSCAD train track library SE has some AMAZING parts, but I wasn't a fan of the bridge, because you'd still require a block to support the track spanning the bridge. I took the bridge ramps into TinkerCAD and added a…
I remixed https://www.prusaprinters.org/prints/24951-prusa-mini-filament-sensor-holder-v2 because I didn't have an m3 square nut available and the thread of the printed m3 square nut was to weak. Hence I adapted the holder for use with a…
A case made for mounting your Raspberry Pi4 to your Prusa i3 MK3. Smallest form factor possible for a Pi4. All peripheral ports accessible (not the Pi headers). Break away window for Pi-cam. Windows for status lights. Easy to print: no…
Remixed the excellent work of Rephlex00 to suit my need. I simply elongated the tabs that hold on to the collar so they'd hang on to it more. As originally designed my 55lb pitties shake the AirTag off when they shake their heads side to…
I wanted a textured surface on my print, so I remixed this to be able to print the parts laying flat on the 180x180mm bed. You'll need to print them with supports, but without a skirt or brim when printing on a Mini/Mini+; after which…
This is a remix of Mao Zedong's figure, I added platform to. Was made as a gift to my friend.
The original version printed beautifully but was ever so slightly too big. After seeing comments of others having to grind or sand down a lot to make it fit, I took the model and in tinkercad and just made the track part 0.25mm slimmer…
Differences against original: parts are less robust (as I dont think some parts must be that thick, it holds only headphones..) so I have made some parts thinner (with the same overall dimensions) as a result also desk can be thicker to…
Bed Scrapper w/ Replaceable Blades: Tired of reprinting a whole bed scrapper when the edge gets worn? Just print another blade! A practical, fast and environmental solution! Print time on the blade is only 9 minutes ! A multipurpose…
It's just a special version for MMU from my Big Einsy Case Honey Comb : https://www.prusaprinters.org/prints/67408-big-einsy-case-honey-comb-remix Here is a link to the coordinated remix cover :…
This sleek and stylish case is the ideal way to jazz-up your Raspberry Pi Zero! It is aesthetically pleasing, as a number of color combinations can be used, as well as displaying the Raspberry Pi logo proudly. It also doubles as cooling…
Watch out for your ice cream ****No Need Support****
print without support
Remix of Low Profile Prusa Mini Anti-Vibration Feet by Alexander Þór . This is the most effective upgrade I have made for my printer. Absolutely brilliant model. The printer wobbled after installing these dampening feet, so I modeled…
I wanted to model a somewhat cartoonish version of a concrete/cement mixing truck. They're my favorite kind of trucks. FEATURES: Fully printed bearing wheels (they are very loose but they roll and spin!) Handle for spinning the barrel…
My Thermomix "Teigretter" helps for easier dough removal on the Vorwerk Thermomix TM5/TM6. It is loosely based on the “Teigling” model made by DonBorste but completely drawn by myself - see…
This is modifed version of the initial vase mode design. Primary goal was to reduce print times and plastic use for PLA disposable printing... This design compared to RC2 uses 3 to 4 times less plastic and is usable... It is much improved…
This print-in-place openable backpack will fit both “EASY 13” and “MINI 13” poseable jointed figures by soofazone , which have a slot for a rectangular pin on the backside of the chest piece - as opposed to “LUCKY 13” , for whom this…
Holder for PlayStation 5 Headphones
I liked the original clip, but found it to be bigger than my needs. You can not simply scale down the model and print naively, since this will also scale down the size of the spacing between the prints, resulting in a fused print. My STL…
Remix of dMosher's design “ Larger Console Tray for Honda Pilot or Ridgeline ”, with minor improvements. This should be compatible with the following vehicles that use “Base Tray” part number 83407-TG7-A01 or 83407-TG7-A02: 2016-2022…
Print Tips The normal size version should be fine for most average keyboards. Can add two small (10mm diameter) helper discs to the model in the slicer (as shown in the attached 3mf file) so we can be more relaxed about printing.…
I modified the original version so it can fit a normal door size with 33m thickness. 10% infill and 0.2 layer height and should be printed with the side facing the plate, at horizontal orientation. I recommend using a 3M tape on the back…
Loading model in Prusa slicer you must reduce to 98 percent, orient bottom to build plate and rotate model 90 degrees. I have included a tested print file for mk2.5S that shows orientation to build plate as well.
I remixed Jonas whistle with a scout sign emboss. Now updated! with 2 new models.
NACS plug holder
This is a remix of https://www.thingiverse.com/thing:3669328 . I've gotten permission from the original creator to post this remix. I've made a simple edit to the STLs to remove the raised edges from the bottom to allow compatibility with…
Albert-Ernest Carrier-Belleuse was a prominent French sculptor and ceramicist of the 19th century, renowned for his eclectic style blending realism, naturalism, and decorative elements. His works often incorporated mythological and…
Pitbull-Labrador mix dogs are playful, loyal, intelligent and cute. If you have one, squirrels rabbits and chipmunks won't bother you.
I printed in PLA Infill: 15% Layer Height: 0.20mm Supports: No If you like my work consider Buy me a coffee 😊
Fidget Worry Stone remixed from OBconcepts Worry Stone Stress Reliever https://www.prusaprinters.org/prints/52185-worry-stone-stress-reliever This can be printed with the dimples down and no supports needed. Print Settings Printer Brand:…
I love the closed version but it wasn't working very well for me mainly because the curve of the filament was causing a jam and the clip wasn't moving freely. I have removed a part of the closed section and this allows the filament to…
A remix of the insert of the round "drippy bucket". This one has different levels (heights) to cope with your stuff of different sizes. Six compartments with a height of (roughly) 10, 9, 8, 7, 5 and 3 cm.
28 April 2023: I will no longer be supporting revisions to this model. You can use it as is, and add negative shapes to fit the dimension of your tape/magnets. I have been so busy that this has fallen off the list of priorities. It's…
This is a remake of the Universal Rewinder by https://www.thingiverse.com/VincentGroenhuis, https://www.thingiverse.com/thing:3338467 which was taken a step further by Blargedy https://www.thingiverse.com/thing:3867357 which gave me the…
I got tired of finding a toothpick or Popsicle stick and cardboard scrap to mix and apply epoxy. There are likely others here (I didn't look) but I like making things so I created this one. The OpenSCAD file is included so feel free to…
(Popis v češtině naleznete níže) EN: Otherwise superb model of “Hadley” - astronomical telescope has a baffle that holds only on one rod. To make it sit where it shoud you need to fasten the screw very firmly. This remix fixes the baffle…
A remix of "sinkside sponge dish (vase mode)" by user Catdad Workshop with a more pronounced water fall added. All user credits Catdad Workshop. Your channel: https://www.printables.com/es/social/221908-catdad-workshop/about Your original…
Remix of Buddy3D Buddy 3D Camera Mount Prusa MK4/MK4s and other Aluminum Alu Profiles
Die "Bienenwabenstruktur" wurde in der Höhe von ca. 2-3mm reduziert, was eine gewisse Biegsamkeit bringt. Überdies kann es dann als Grill, Zaun, Untersatz usw. verwendet werden. Kann bei Bedarf weiter dünner gemacht werden Bezüglich…
The original model height is approximately 21cm. Suggested print settings: Layer height 0.2mm. Infill 20%. Perimeters: 3. No supports are needed. Models in pictures are printed at 50% scale. Changelog 20 Oct 2023: Version 2 - An alternate…
ReMixed Andrew Burkhart's KitchenAid Mixer Attachment Holder which was a remix of tacoh's Shelf Bracket. Resized for 1 inch wire spacing on the wire rack, made the bases a bit thicker and added a backstop to the top piece. Printed in PLA…
I slightly modified the tripod leg shape. I broke a lot of them and I realized a bit stronger shape.
This is a remix based on the Complete IKEA Drybox Solution idea from crashdebug on thingiverse with some element ideas from Mihai's DryBox on thangs. All parts but roller_mount_inside and roller_mount_outside are done from scratch in…
I couldn't load @CB_110818's gorgeous 4-color Great Wave remix 3mf file ( here ) in PrusaSlicer, so I imported the original STL from Thingiverse ( here ) and colored it myself. I printed it on a Prusa MK3S+ with MMU3, in PETG. I used…
Design: I started from the https://www.printables.com/model/190380-print-in-place-boxes designed by Vidar I sized the box using Fusion 360 parameters from the original model and design an insert for the drills bits. With thickness set to…
Less than 10 percent of people who download an item click the “like” button. Be the 10 percent. Click the “like” button and show your support. If you find this model useful, feel free to buy me a coffee . This is a collection of remixes…
I found an excellent radiation shield model from @ilMitch_97530 . Unfortunately, I don't use Aqara sensors. So I adapted the original holder for the temperature and humidity sensor TP-Link Tapo T310. It was easy because the author also…
I wanted the screwdriver mount originally made by https://www.printables.com/@herbert to fit the Honey Comb Storage Wall by https://www.printables.com/@RostaP. https://www.printables.com/@TheMakersWorkbench had uploaded his Fusion 360…
This is a remix of the Skadis Boards linker by Koprov that has thicker pegs to provide extra tight fit in the board's hole. The fit now is very tight. In addition to the original model where you could only position the links horizontally,…
This is a remix of djedje_zr7's There's A Ghost (glowing) In My House, the original requires screws and nuts. I did not have them but I had a bunch of 8mmX3mm magnets so I redesigned both pieces to use magnets instead. Six 8X3mm magnets…
I did a quick remix of 3D Printy Print-in-Place Twisty Puzzle - Christmas Tree to have both simple and difficult versions of the Xmas case. This is the latest version of each puzzle. This is not the full print in place puzzle, you will…
INFO I edited the original survival whistle and sliced off the top and bottom layers and made it flat, then I added the TRD badge on top just for fun to print for myself and my friend. Planning on making car accessories-related parts…
I printed in PLA Infill: 15% Layer Height: 0.10mm Brim: No Supports: Yes, organic on build plate only Seams: Aligned If you like my work consider Buy me a coffee 😊
it is useful for mixing two part epoxies. However take care that the left over epoxies are removed immediately by applying some vegetable oil and wiping it off. it can be also used as a bowl, cat feeder, saucepan, planter, planter holder,…
Fits to MK3/MK4 bed when placed diagonally.
This is a remix based on the original design of Alex Hatch at https://www.thingiverse.com/thing:557527 and the remix made by Jason Cross at https://www.thingiverse.com/thing:2254250 I found this awesome model and make it as a key-chain to…
As a coffee junkie I was in need of a appropriate sign for my office to keep those pesky colleague out on monday mornings. (Spoiler: It doesn't work, but still it is funny). I liked SpaceCadet2's sign, but I wanted it with a border. I…
Mehrfarbiger Druck mit Prusa MK3S+MMU2S, mit PLA in Gold u. Schwarz. Druckeinstellungen siehe Fotos. Gedruckte Teile zusammen stecken, fertig. Bei mir sitzen sie sehr stramm so das kein Klebstoff benötigt wurde. STEP-Dateien für Eigene…
Recommended print settings: Material: PLA or PETG Layer Height: 0.2 mm or less Infill % : 25+ Supports: No Print Orientation: Default as modeled Brim: No
Whole remix was inspired by my need to tag contents during 3dsets cars builds. Most used tags (pre-made models) for screws fitting their products you can find in separate collection here:…
Epoxy glue mixing tool. The maximum volume is 3 ml. But you can scale and create any volume. The printing time of one set is about 14 minutes. I print them myself in stock of 15 pieces at a time. Created in Shapr3D. Printed on Prusa I3…