1 / 1
Radius Gauge 1-30mm | -52,8% Minimal Remix
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Radius gauge to take measure of and redraw rounded shapes using a fixed set of gauges.
- Rating
- 4.938 / 5
- Likes
- 330
- Downloads
- 717
- Makes
- 19
- Views
- 2,726
- Reviews
- 16
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Minimal remix of @Dingezzz remix of the 1-30mm Radius Gauges by @Restoredoctor.
- Reduce the filament use of the original model by 52,8% from 225,72 to 106,38
- Three prearranged build plates in 3mf and stl format for all tiles with correct orientation
- Only 1mm thick gauges
- All 60 pieces fit into one container
- Changed Lid markings to ConsolaMono Font for better color offset reproduction and technical appearance
Print advise:
- Print the gauges first!
They should be 1mm high and can only have 11% tolerance in thickness.
The slots that keep 5 gauges are modeled 5.55mm wide.
Please measure the thickness of 5 gauges to see if the accumulated width exceeds 5.55mm.
In case 5 gauges are wider than 5.5mm, upscale the lid and base by some percent using your slicers features.
If you want to support me, please check my other models!
I do very niche projects mostly. Thus, understandably, only few of my models become popular.
But chances are high that you can find inspiration from my specialized works.
https://www.printables.com/@moWerk/models
Thank you and happy printing!