1,573 models
IMPORTANT NOTE: 3D-printed plastic screws will break. Because of the way a 3d printer works, and the way the screws are typically oriented during printing, they are very weak. Things like printing in PETG, adding more perimeters, and…
Print approx. €2.34–€2.86 excl. taxPreliminary estimate for PETGSource material: PET
Light bar for the Prusa i3 MK2/S and MK3/S/+ available in single light, dual light, and MMU2 compatible dual light versions. Mounts are designed to fit 9x17mm aluminum u-channel and have a hollow interior that is used to route the wires…
Print approx. €0.24–€0.29 excl. taxPreliminary estimate for PETGSource material: PET
Support me & Buy a T-shirt Sizes All three sizes are fitted for the Original Prusa i3 MK2/2.5/3/4 3D printer. Small size - 245x205x80 mm Medium size - 245x205x150 mm Large size - 245x205x220 mm Only small size is equiped with front…
Print approx. €1.02–€1.24 excl. taxPreliminary estimate for one variant
---- Grenade MK2 WW2 ---- UPDATE: Small update to the "Head" see "Head_v2". The "Head_v2" version will now slice/print better on the two flanges. Tried to make a Grenade, and as a reference I used the American MK2 fragmentation grenade…
Print approx. €0.13–€0.16 excl. taxPreliminary estimate for one variant
Single light bar for the Prusa i3 MK2/S and MK3/S/+. Mounts attach to the hexagonal holes in the z-axis tops. Mounts are designed to fit 9x17mm aluminum u-channel and have a hollow interior that is used to route the wires down the back of…
Print approx. €4.23–€5.17 excl. taxPreliminary estimate for one variant
Light bar for the Prusa i3 MK2/S and MK3/S/+ compatible with the MMU2/S. Mounts are designed to fit 9x17mm aluminum u-channel and have a hollow interior that is used to route the wires down the back of the printer frame for a clean look.…
Print approx. €3.77–€4.60 excl. taxPreliminary estimate for one variant
This is a simple dust cover for the Z-axis mounts. They drop in place, and prevents most of the debris from falling into the Z-axis mount opening. Update: People noted that the clearances wasn't working perfectly anymore, so I checked the…
Print approx. €1.80–€2.20 excl. taxPreliminary estimate for PETGSource material: PET
Simple filament guide for MK2/S + MK3/S printers. Main design considerations V2 (Green) provide enough gap for filament movement as Z rises higher arm in respect of spool to aid filament path / extruder reduced thickness of arm V1 (Blue)…
Print approx. €0.58–€0.71 excl. taxPreliminary estimate for one variant
Remixed "MINI-knob" (Prusa Mini) and "LCD-knob" (Prusa MK2 / MK3) by PRUSA RESEARCH https://github.com/prusa3d/Original-Prusa-MINI and https://github.com/prusa3d/Original-Prusa-i3 This knob features a smaller form factor, knurled sides…
Print approx. €0.40–€0.49 excl. taxPreliminary estimate for one variant
NOTE: This light bar was made after receiving requests from users to adapt my standard Prusa frame light bar. I do not own a Bear Upgrade printer, so I had to rely on other users to test it for me. Please leave a comment or message me if…
Print approx. €7.55–€9.23 excl. taxPreliminary estimate for one variant
First layer test surface that uses the whole printbed 210x250mm with 0.2 mm height. Can be used to visualize warped / uneven printbeds. The included gcode has the ooze free startcode sequence. Happy printing! Print instructions Ooze free…
Print approx. €1.40–€1.71 excl. taxPreliminary estimate for one variant
Please click if you appreciate my work :) Retro soul in a modern shell. This 3D printable wall-mounted sculpture captures the sharp, unmistakable lines of the Toyota Celica Supra MK2 – a true JDM classic from the golden era of the '80s.…
Print approx. €12.52–€15.30 excl. taxPreliminary estimate for one variant
New version of Pry Tool with 12mm, 10mm, 8mm, 6mm and bottle opener. Mk2 does not require support.
Print approx. €0.48–€0.59 excl. taxPreliminary estimate for one variant
This is an upgraded version of my previous design, which now includes a more steady base, an "open layer" addition and a print-in-place top with handle. The tower is meant as a method of recycling Prusament spools, but can also be made by…
Print approx. €1.01–€1.23 excl. taxPreliminary estimate for one variant
Having recently purchased an Original Prusa i3 MK2 (and now MK3/S/+), I was originally dissatisfied with the poor bearing mounting method that can easily introduce variability in the Y and Z axes. Inspired by other overly-complicated…
Print approx. €0.40–€0.49 excl. taxPreliminary estimate for one variant
A Remixed Cover Lens for a Raspberry P1 Camera V2 board with an ArduCam 8MP IMX219 Sensor module (for RPi and Jetson Nano) with a 175deg Wide Angle M12 Lens. I included the Step file for your remix convenience.
Print approx. €0.28–€0.34 excl. taxPreliminary estimate for PETGSource material: PET
SicherheitsRahmen für das Icom IC706mk2g Amateurfunkgerät. Um dieses beim Transport vor Schäden zu schützen. 2 Teile müssen gedruckt werden und man benötigt 4 Senkkopf Schrauben M5x12 um die Teile zum montieren.
Print approx. €3.88–€4.74 excl. taxPreliminary estimate for one variant
Created this because I had to replace the Heatbed thermistor since it had a short. I believe it was caused by hitting the lower track and causing it to bend more than necessary ever time it moved back and forth. This will lift it up a…
Print approx. €0.26–€0.32 excl. taxPreliminary estimate for PETGSource material: PET
Die schmalen energy drink Dosen neigen bei unserem Ford Smax leider immer zum umkippen, da die recht groß dimensionierten Getränkehalter für kleiner Dosen nicht wirklich geeignet sind. Also habe ich Maß genommen und eine Art Reduzierhülse…
Print approx. €2.03–€2.48 excl. taxPreliminary estimate for one variant
This is my version of Gcode (Slic3r) for those of you who want a ooze free mesh bed leveling. Also, for those of you who suffer from live z-adjustment of different materials. Process of the Gcode NOTE: Please clean and clear the bed…
Print approx. €0.59–€0.72 excl. taxPreliminary estimate for one variant
Greenhouse jar mk2 Turn your empty jar into a small greenhouse for your growing plant. This model is suitable for pot with a 8.5cm diameter and 7cm height. The model is designed to allow you to easily take off the jar for watering. This…
Print approx. €8.01–€9.78 excl. taxPreliminary estimate for PETGSource material: PET
This Remix based on SethBon's LED Light Bar. I changed only the dimensions for the alu extrusion to 7x14mm.
Print approx. €6.60–€8.07 excl. taxPreliminary estimate for PETGSource material: PET
These are dashboard clips for an Oldtimer. The Ford Transit MK2 (1985). The old clips breaks due the process of long aging and the dashboard cant be secured. These clips fit perfectly into the opening and are secured by the long plastic…
Print approx. €1.10–€1.35 excl. taxPreliminary estimate for PETGSource material: PET
I used this light bar: https://www.amazon.ca/dp/B09N8QQDSP?ref_=ppx_hzsearch_conn_dt_b_fed_asin_title_3 Creality LED Light Bar ASIN : B09N8QQDSP Also I have used little bit of electrical tape to make this light snag so it doesn't move. As…
Print approx. €4.47–€5.46 excl. taxPreliminary estimate for one variant
Support me & Buy a T-shirt The Cantilever box is compatible with SBox for MK2/3/4 - stackable toolbox system and is intended for printing on the Prusa MK4 size 3D printer. Assembly list of non-printed parts 16 pcs - metal axis 36( 35 )mm…
All printable parts for your Original Prusa i3 MK2S. Print instructions: Use Prusament PETG and the PrusaSlicer's default PETG 0.2mm presets.
All printable parts for your Original Prusa i3 MK2. These are the parts for the older MK2 model intended for repairs. See the MK2S printable parts for upgraded parts. Print instructions: Use Prusament PETG and the PrusaSlicer's default…
This is the new and very much improved version of the BC-304 class from the show Stargate. Originally I intended to release it as a remix of the original one, but the changes are quite large so I decided to post it as an entirely new…
Support me & Buy a T-shirt The Cantilever box is compatible with SBox for MK2/3/4 - stackable toolbox system and is intended for printing on the Prusa MK4 size 3D printer. Assembly list of non-printed parts 8 pcs - metal axis 36( 35 )mm x…
Attention: These files are for version MK2. Please check which hardware you have! Please read these instructions completely and carefully. The requirements must be followed otherwise the function of the extruder may be impaired. The…
Printable parts for the MK2/MK2S/MK2.5 to MK2.5S Upgrade. Note this is a legacy download. As MK2.5S is an upgrade for the older MK2, MK2S or MK2.5 printer, other parts not listed in this print are available as the MK2S parts:…
(update) I've added a version with a lanyard hole 3 M3 nuts 1 M3 5mm screw 2 M3 12mm screws I used a Stanley Carbide Blade I recommend using a button head screw for blade retention. Please be carefull with the blades First Step Second Step
I designed those for two reasons. First, it's a pain to handle the bottom panel with the fan cable still attached to the motherboard. And second, when printing ABS, I was astonished to feel how hot the frame was. And I didn't like the…
Print settings: (Updated 28.07.25) material: PETG Use 4x wall perimeters/layers Use 4x Top/bottom layers … but → Modify for ZERO bottom layers - print it open on the bottom! Fluid in the inside can flow out. Supports for ventile area -…
Update 29.02.24: Grüße geht raus an alle heutigen Geburtstagskinder =)! Danke an @Hanno_1419514 für den Denkanstoß zu der guten Verbesserung die Ventilblöcke einfach unten offen und komplett ohne Infill zu drucken! → (Prusa Slicer) Die…
Print settings: (Updated 28.07.25) material: PETG Use 4x wall perimeters/layers Use 4x Top/bottom layers … but → Modify for ZERO bottom layers - print it open on the bottom! Fluid in the inside can flow out. Supports for ventile area -…
Attention: These files are for version MK2.5. Please check which hardware you have! Please read these instructions carefully. The requirements must be followed, otherwise the function of the extruder may be impaired. The Original Desktop…
Big brother to the mini bed scraper =) Print in PETG and it's almost indestructible. https://www.printables.com/model/55519-bed-scraper-fast-print-15min-minimal-filament-usag/comments/420863
Update 30.12.: Length of srew optimized to 60mm so it fits on any thickness of tables used with the 2 clamps. Before there was a gap of table-tickness the one screw with the both clamps could not cover. Print settings: Clamp with no 4-5…
Using Remix as a reference, I created a model that does not require additional parts such as bearings, bolts, or shafts, and can be produced using only a dry box, PTFE tube, and a 3D printer. Requires 4x: 608 bearings 1x: PTFE tube Φ4mm…
This UPDATED version fixes any problem of the phone falling over and now fits phones of all sizes, it prints on its side and the speed can be cranked up due to its simple nature. It takes about 20 minutes to print and fits the iPhone 16…
Inspired by Toolbox Widget type organizers and based on a similar design by kickit2 on Thingiverse. Fits 12x5mm round magnets in the base (2 pcs 12x2 works as well). There is a single and double of the full size and I added a double in a…
The Cantilever box is compatible with SBox for MK2/3 - stackable toolbox system Assembly list of non-printed parts 4 pcs - metal axis 36(35)mm x (2.8 - 3)mm or M3 screw with internal hex head 8 pcs - metal axis 39(40)mm x (2.8 - 3)mm or…
Printable parts for the MK2 / MK2S to MK2.5 upgrade. Note, these are the parts for the MK2.5 upgrade, not the newer MK2.5S upgrade.
A mount for installing a Prusa i3 LCD controller on the outside of a LACK enclosure. Compatible with MK2 and MK3 LCD assemblies. Not compatible with MK4 LCD assembly. Description This is a redesign of zamky's Prusa i3 LCD Holder that…
Keep your Prusa i3 steel sheets organized and dust-free with this sturdy, under-table storage solution. Designed for all recent Prusa i3 models with a standard bed size, this holder will not fit the Prusa Mini due to its smaller bed…
Back in Black! For no other reason than because I have more bulk black than white this time. This is the second revision of my canter lever filament spool winder. You can find my first version here , along with the original description,…
Welcome to the Rook 2020 MK2 3D Printer Kanrog who is part of the Rolohaun Design helped created this printer! This is a small DIY beginner friendly CoreXY 3D Printer. This is based on the Rook 2020 MK1 , the frame now uses blind joints,…
The source marked this model as adult content.
This is an old version. You can find the updated version here . Introduction I'm Seb, I'm a student and I've been working on the idea of 3D printing a skateboard for more than 2 years. The goal was to print both the trucks and the board…
Update: 10_08_25 Uploaded 510 Volcano duct step file Update: 05\04\22 Replaced: WIP_Direct Drive Head Ender 3 Orbiter V2 no Upstand V2_1 as the original conflicted with the mounting plate. Update: 25\01\22 The V1_1 Orbiter Mounts had…
Introduction A while back I designed this other handle for the Einstar 3D Scanner: https://www.printables.com/model/364038-einstar-handle I used the feedback and experiences from that one and designed a new updated model. Of course, it…
New version of Bondtech BMG Prusa Upgrade MK3S/MK2.5S with RHD ver.C fan shroud. I modified the original version model to be easy printable with FDM printers. The original source:…
Original Prusa MK2S to MK3S Upgrade printable parts. Note, this is a legacy download. This is the upgrade to MK3S, not the newer MK3S+.
Original Prusa MK2.5 to 2.5S Upgrade Printable parts. Note this is a legacy download. As MK2.5S is one of the upgrades for the older MK2/S printer, other parts not listed in this print are available as the MK2S parts:…
This 6 cell module tray for starting your seeds, designed to be strong and sturdy so that i can be reused many times, with a large hole in the base to aid drainage and the easy removal of plug (plant) once the plant is ready for…
LCD cover for prusa MK3SMMU2S & MK2S Print instructions LCD COVER STL FILES: 1- You need to download only these files lcd-cover-mk3s_assy.stl or lcd-cover-mk2s_assy.stl knob_assy.stl 2- Split the parts into PrusaSlicer to assign extruders…
PRUSA color scheme print of the Predator Action Pliers Mk2. Print instructions Prints in place with no supports.
This was my first OpenRC Tractor. It's based on the Ebro160d/MF165. After many years since first version, I still think this is a great model, so I improved some parts of the MK2 and released MK2.4. They are not huge changes but they make…
This thing is originally designed by RH_Dreambox on Thingiverse . Thank you to him for putting in the hard work to make this print great. Posted here with conspicuous credit. This fan shroud was designed with Autodesk CFD to create better…
Read: How I Designed a 3D-Printed Laminar Flow Nozzle (2026-08-21) Versions mk1 - 2020-08-31 mk2 - 2025-06-04 mk3 - 2025-06-06 Intro Like so many late-night YouTube voyagers, I was hypnotized by those crystal-clear “glass rods” of water…
Calling all Marvel fans and 3D printing enthusiasts! This is a highly detailed 1:1 scale replica of Tony Stark’s iconic MK-II Arc Reactor from the Iron Man movies – carefully designed with functionality, ease of printing, and an epic…
Hi Mikeo, I have gone all out on this one and have a couple more Titan helmets to upload, I've split it as best I could to eliminate as much of the need for support as possible. But you will need some here and there. I've made the whole…
Here's the new version of my cyborg conversion kit for Dummy 13, aiming to turn the figure into a 30min. Sisters/Frame Arms/Desktop army type of figure while taking advantage of soozafone's great chassis design. The head is a new spin on…
This is a case for the PI camera with fisheye lens and IR light https://www.amazon.co.uk/MakerHawk-Wide-angle-Automatically-Day-Vision-Night-Vision/dp/B07DRH5Y5S REMIX from https://www.prusaprinters.org/prints/3407
The Perforated Crate is compatible with SBox for MK2/3 - stackable toolbox system Assembly list of non-printed parts 4 pcs - metal axis 36(35)mm x (2.8 - 3)mm or M3 screw with internal hex head 8 pcs - metal axis 39(40)mm x (2.8 - 3)mm or…
This version is outdated. MK4.1 is available here : https://github.com/mr-kiou/q-pack Open-source version of the proton pack from Ghostbusters. Our goal is to make the best, easy to use 3D printable version of the proton pack from…
Update 2022/04/19 I've created a version of the Mark 3 arms for 2020 VSlot aluminum extrusions. Check out the remix section! Update 2019/10/18 I've imported this project from my Thingiverse account. To make things clearer, only the Mark 3…
Extruded this from original Prusa DXF files. MK42 = Prusa i3 MK2 and MK2S (frame, Y carriage) MK52 = Prusa i3 MK3 (frame, Y carriage, fronat & rear plate) Looking for ALU extrusions? Look here: https://www.thingiverse.com/thing:2838381…
Handy UV and elements cover for your landroid mowing robot. May be easily adapted to different mowers. This is update Mk2. I made it 2cm higher after observing a couple of collisions. Option with ridiculous Cyberpunk vibe provided as…
Can You 3D Print a Skateboard? There are a lot of new features in this updated version (old version) : completely revised instructions material test improvements for easier printing version for Prusa XL or other large printers The project…
Heat or glue here as it will pull out if left in place.
A box to help protect your cables, or help keep your feet from kicking them. Just put a power strip in, plug your devices in, and have a good ol' dance! An update to the Cable Box I previously did. This is Mk2! I remodeled it and have it…
The Crate is compatible with SBox for MK2/3 - stackable toolbox system Assembly list of non-printed parts 4 pcs - metal axis 36( 35 )mm x (2.8 - 3)mm or M3 screw with internal hex head 8 pcs - metal axis 39( 40 )mm x (2.8 - 3)mm or M3…
Here is my design of a Lightbar for the Prusa MK2* & MK3(s). Features: LED's directly powered by the printer Wiring running inside the mount Integrated filament guides for both spool sides On/Off switch Directly wired to the Einsy board…
Original Prusa i3 MK2 to MK2S Upgrade. This is a legacy download.
Its a Streamdeck Holder /Slider for under the Desk V2. 4 Wall 30% Infill 3-4 Solid Top and Bottom Layer Many people had the problem that they couldn't get the parts together. I have now made a recess in the part with an adhesive part.
it's made to be pushed on but works best with a layer off glue on the edge
A cable strain relief for the x-axis for all the Prusa i3 MK2- and MK3-based printers and the Prusa Mini. This model combines some ideas from other models. This version clips to the back of the x-axis stepper motor with a very tight fit.…
This is for use with PRUSA i3 MK3S+, MK3S+:MMU2S & MK2.5S+ printers. Designed to be used with TheZeroBeast MK3S:MMU2S Firmware here... " https://github.com/TheZeroBeast/TZB-MMU2S-Firmware/releases " V3 Changes combine with R6 stock…
Variants This box has two versions, with and without perforated long sides and bottom. Assembly list of non-printed parts 12 pcs - metal axis 36( 35 )mm x (2.8 - 3)mm or M3 screw with internal hex head 12 pcs - 20mm M3 screw with internal…
Holder designed to fit the Dremel 3000. It will also most likely fit the 4000 without any modification. Designed for quick and easy mounting using latches. No tools or screwing necessary. Both brackets have a very snug fit and hold the…
Original Prusa MK2S to MK3 Upgrade printable parts. Note, this is a legacy download. The neccessary hardware for the upgrade is not sold anymore as a bundle. This is the upgrade to MK3, not the later MK3S nor MK3S+.
Just another design for an extruder rotation indicator/visualizer. Print, glue a 8x3mm Neodymium magnet to it and snap it onto your extruder motor. I have used CorrugatorSupercilii's OpenSCAD Turbine Propeller Generator to generate the…
Super simple visualizer that stays out of the way. And it prints in like 5 minutes. Just use a small magnet to mount like all the others.
This design is now outdated, V3 can be found here https://www.prusaprinters.org/prints/66215-tzb-mk3smk25smmu2s-extruder-mmu2s-no-tower-v3 This is for use with PRUSA i3 MK3S, MK3S:MMU2S & MK2.5S printers. Designed to be used with…
A Little holder/protector for your BaMaKey TP-iii - from BaMaTech. Pretty self explanatory. The main holder slides nicely into the outer sleeve - like a matchbox etc. There is a recess and a tab to keep it clicked shut - works well. There…
ATTENTION: In order to see if this file works for your 3d printer. Please print the Rail_Test.stl file first. If you downloaded the old files, you need to Scale them down to 10% I've designed this Carbine Kit for the SSX23. The SSX23…
Gets the last drops out but stays attached and doesn't get in the way of the lid. So you can put the near empty bottle back down anywhere, not just in its stand.
*** Thanks for checking out this model! *** If you appreciate what I'm doing, please consider buying me a coffee , and check out my other models ! ********** Looking for MORE upgrades for your enclosure? Consider doing this one!…
Sizes This box has two sizes, small and medium. Assembly list of non-printed parts 12 pcs - metal axis 36( 35 )mm x (2.8 - 3)mm or M3 screw with internal hex head 4 pcs - 20mm M3 screw with internal hex head 4 pcs - 20x6x2mm neodimium…
I improved my previous model and added an 8x HVAR/ATAR rocket and landing gear. adapted for printing halves which are then settled using two blocks and glued. There are grooves left for the chassis and it also needs to be glued. Can be…
Many of the other no touching tools do not have any type of enclosure which we will touch it with our hands or clothes eventually. Even those with an enclosure, it is a separate enclosure so it is not as convenient. This design is…
Wanted to get rid of the heavy base on the Logitech C920 and mount it to the arm. This adapter is a mash together of the two existing things. (minor disassembly of webcam required) Just a mashup of:…
new model mk3 is here: https://www.printables.com/model/675051-small-wind-turbine-mk3-windmill This is upgraded version MK2 of Small wind turbine. But it is just model aprox. 500 mm length, it does not produce any electric or mechanical…
DRAGONS AHEAD THIS IS A BETA 3D PRINTER! Welcome to the Rook MK2! This is a huge update to the Rook 3D Printer: Specs: Full 120 x120mm Build Area 4:1 Gear Reduction Z Cartesian Motion for simplicity Fully 3D printed Frame Easily…
FYI If printing for the Transparent or Nuclear Screwdriver print at 102% as they seem to be slightly larger. Re-design of my original case slimmed down to put in my laptop bag. No removable bit holder or need for magnets. Just wanted a…
Bit holder for hexagon screw bits Advantages at a glance: Requires very little filament Short printing time The bits are clamped and cannot fall out Many different sizes from 4 bits to 30 bits Inverted vase mode: Regardless of the nozzle…
EDIT: Permanently moved to Makerworld. Link: https://makerworld.com/en/models/532905-protogen-mk2-neo-v0-3-m16-x-snowkat This is a rework of the original MK2 Protogen by M16 Studios! All credit for the original models goes to M16 Studios.…
Update: 25\01\22 The V1_1 Orbiter Mounts had incorrect fixing centres for the V1.5 Orbiter so I have uploaded V1_2 (+ step file)for the tool head to correct this error. Update: 12_01_22 Uploaded Tool Head mount for the Orbiter V2…
