55 models
I inherited a tripod from my father. Unfortunately, the head screw has recently broken. So I fired up OpenSCAD, designed a replacement screw and printed it out. (Used 8796_Poor_man_s_openscad_screw_library for the screw thread) See…
Print approx. €0.35–€0.42 excl. taxPreliminary estimate for one variant
Dual Extrusion or Single extrusion Print of the monaco circuit. Included the DXF files to CNC or laser cut the wooden box. You can also print a the black part seperate or glue it on a piece of wood. Needs a low layer height for a good…
Circuit de Monaco, on a stand with it's name. Race track 3x3 mm Stand 198x3x15 mm Gap for putting the track into the stand 0.1x0.1 mm bigger so it's easier to assemble. Looks best when separate parts printed in different color fillament.…
It's a Remix, I scaled it up for my Frame. The Frame which i use you will find here: Glorex 3D Bilderrahmen - kaufen bei Galaxus
This is a faithful reproduction of the Circuit de Monaco. Its dimensions are 20cm long, 8,5cm tall, 3mm thick and the track width is 5mm, but you can scale up or down any dimension to suit your needs. As it is a simple model, it looks…
Large 3d miniature of the Principality of Monaco! Smaller version of Monaco: https://www.printables.com/model/724871-monaco-3d-miniature-f1-edition Check out my collection of other Large miniature cities:…
There is a full version of like 30cm but you can scale it as you want. For the size i wanted i couldn't print it in once on my ender3 so I split it in two parts. There is so the left and right part that you can join with glue. You can fix…
A 3D poster of Monaco Grand Prix track map of F1. Design is made so that you can put LED lights behind the track - Transparent or translucent filament needed! (or make the track itself less tall in slicer since it is 4mm tall by default).…
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Filaments Used: PLA+ Sunlu Black PLA+ Sunlu Grey PLA+ Sunlu White This print uses 3 unique filaments Swap Instructions: Start with Black At layer #12 (1.04mm)…
Recreating the Formula 1 trophies to practice FreeCAD and for my Formula D League. This is not a 1 to 1 recreation of the original trophy. The trophy comes in multiple pieces to be pressed together. If the pieces are a little loose, some…
Formula 1 Circuit de Monaco with elevation and DRS detection zones. Can be printed as it is or with 120% size; 0.4mm nozzle.
F1 Monaco GP Trophy. Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: Doesn't Matter Supports: Yes Resolution: 0.2 Infill: 20 Filament: IDK PLA Black Category: 3D Printing
Dimensions: 125x139mm Height: 5mm Thickness: 2mm Can be easily scaled up or down. Recommended print setting: Resolution 0.2 or lower Ironing on top surface 20% infill
Italy Imola You can build a racing circuit in Monte Carlo using roads from the Racing Circuits - building kit . Here is a list of the parts and how many you will need: A1CLRC - 2× A1LRC - 4× A2CLRC - 3× A2LRC - 6× A3CLRC - 4× A3LRC - 18×…
Adaptor to mount Visaton FRS-5X Chassis onto a downground Monacor WG-300 Can be used for Wavecone MKII Speaker by donhighend (http://www.donhighend.de/?page_id=8664)
Monaco F1 Track LED Sign This model is a detailed representation of the iconic Monaco F1 track, designed to function as a striking LED sign. Perfect for motorsport enthusiasts and LED sign collectors, the current version is available as a…
Adapter für die Befestigung diverser Hochtöner ans Monacor WG-300 Getestet: Peerless XT25TG30-04 Scan-Speak D2604/833000 Scan-Speak D2604/830000 Sollte auch passen: Peerless XT25BG60-04 Peerless DX25TG09-04 Peerless DX25BG60-04 Scan-Speak…
sWall art of Monaco track with miniature of F1 car SF-23 Charles Leclerc 1:43 (Burago). Needed stuff Burrago F1 model 1:43! (the choice is yours) Frame 18x24 cm (I used this clip frame) Some glue (be careful with second glue, it makes…
Dieser Adapter wird benötigt, um die Monacor DT-254 an das Monacor WG-300 anzuschließen. Der Adapter / die Druckdatei ist bereits so ausgerichtet, dass ohne Supports gedruckt werden kann. Lautsprecher, für die dieser Adapter benötigt…
To get the best results, the thinner the layer height the better. I will print race track with the first few layers at 0.1 mm with 0.05 mm for the elevation. The elevation and layout is be the P1 time from the 2024 Monaco Grand Prix. The…
3D model of the Monaco racetrack One model is just the track, the second one is with the name of the track. width: 6mm height: 10mm
Circuit de Monaco badge for wall art and track layout I did it with the mmu2s
"Rouges et blancs" Filament changes to achieve the desired result. Standard coaster size and 7mm thick. Printed with .2mm layers. Can be scaled up for a plaque, I would keep Z at 7mm even for a plaque White is the highest surface here.…
Test your bedlever calibration printing this fantastic f1 track. Rotate, scale, change infill method first layer and test it. Have fun
medium sized keychain for F1 fans
Dieser Adapter wird benötigt, um die Reckhorn T-1.0F an das Monacor WG-300 anzuschließen. Der Adapter / die Druckdatei ist bereits so ausgerichtet, dass ohne Supports gedruckt werden kann. Lautsprecher, für die dieser Adapter benötigt…
Druckbare Version des Lautsprechers "Mini ACL" aus einem Bauvorschlag des acoustic-design-magazin.de Die Milchpackung kann nicht gedruckt werden und dient zum Größenvergleich :) Die Wände des Gehäuses habe ich mit 6mm konstruiert, ich…
Printing settings: Please note that the modell need to be printed in 1:1 scale to fit the single and purchased parts. For scaling reference the height of all parts is 11mm. The single parts and also the “set”-parts are designed to fit on…
Circuit de Monaco formula 1 2025
"Rouges et blancs" I messed up the first color on this one but you get the idea. It was late and I was tired, blue black whatever! Filament changes to achieve the desired result. Standard coaster size and 7mm thick. Printed with .2mm…
This adapter allow you to use the Monacore WG-300 on the Monacore DT-254 . Wrong version? This is for the newer (plugged) version of the DT-254. If you need an adapter for the older (three torx screws) version you can use this STL…
Its a f1 track in Monaco and its a keychain
Circuit de Monaco LED Lamp. Print base with 60% or more infill for the top part 80% or more is preferred to work as a diffuser if needed. Top can be printed with white filament I recommend doing it with clear filament to let light pass…
I uploaded two different files, one with the letters and another with a line underneath the letters.
Hello everyone, I designed a lightbox featuring the F1 Monaco track, the F1 logo, and the word "Monaco." I mounted it on a 50x35 cm raw MDF board. I painted the base black. I secured the boxes to the MDF with M3 screws and nuts. I…
white until 6.2mm red until 6.8mm finish with gold
This is a replacement body for the Moncacor DC-100 anti static brush. One of the peg broke on mine so I redesigned it. It has a wider base so it stands up nicely on its own.
A friend has an RV and broke his cover plate on his Monaco Generator and ask that I make a replacement. I am not sure what demand this may have but I thought I would share. I made the emblem alone (in three different colors) and…
The design of the flags follows the Olympics, where they are on a standardised shape of a 2:3 ratio This requires Multicolour! Colours needed: Red, white This model is split into components for easy colour slicing. Backing - Any colour…
UNITEC Monaco USB A/C Steckdose Abdeckung auf Jung AS55 Rahmen.
I designed this duct to adapt Furrion Chill Cube roof top AC units in my 2005 Safari Panther ( Monaco made). The design applies to center duct motor homes with a duct width of 8" centered in the AC opening. Each side is approximately 200…
Bring the thrill of Formula 1 to your home or office with this complete 3D-printable Monaco GP trophy. Perfect for motorsport fans, collectors, and design enthusiasts alike, the model captures the iconic Monaco GP trophy with precision…
Pallina di Natale del circuito di Monaco, Montecarlo
3D printable Monaco decoration/emblem. This design can be scaled to any size in your slicer. Printed flat with low infill (approx. 5%) to save material and time. Use it as a wall sign, desk decoration, or a personalized gift. Category:…
Want a different circuit, your own text or another size? Make it yourself for free at https://shapekit.cc/f1-circuits All 25 current F1 circuits, plus your own routes and more free models on https://shapekit.cc . A 150 × 150 mm two-colour…
Monte-Carlo in a night look: golden houses on the steep slope, the night-blue sea with Port Hercule, and the rocks behind as a relief. The lettering MONACO stands in gold in the sea. Print details Size: 200 × 200 mm, about 67 mm high, one…
I designed this duct to adapt Furrion Chill Cube roof top AC units in my 2005 Safari Panther ( Monaco made). The design applies to center duct motor homes with a duct width of 8" centered in the AC opening. Each side is approximately 200…
MONACO GRAND PRIX is a Formula One motor racing event held annually on the Circuit de Monaco, in late May or early June. Video from printing - I used: - Blender - https://www.openstreetmap.org - print on Prusa MK3S Easy to print, Without…
