Search results: mow

Sort order

877 models

P
PrintablesFilip Zítko

Snowman maker / mold | mini smowman

It's a mold for making mini snowmans from snow. The mold is assembled from three parts. Two mold parts and one joint. Print in place version also available (I didn't print this version so if you will try, please let me know in the…

Downloads
2,468
Likes
1,026
Rating
4.77
P
PrintablesN3XT3D

Ground Screw for Automower (Husqvarna, Gardena and Other Brands)

Longer Version (13.04.2026): Upon request, I created a longer version that is better suited for loose soil. Despite its height, this screw can still be printed on the Prusa Mini. As with all models, no supports are required. Please note…

Downloads
1,183
Likes
154
Rating
5
P
PrintablesMouky

Segway Navimow i105e Messerteller für 6 Klingen und + 2cm Schnittbreite

Messerteller für den Navimow i series. (getestet auf einem i105e, sollte auch für den i108e passen) 6 Klingen und 20cm Schnittbreite (original hat 3 Klingen und 18cm Schnittbreite) Benötigt werden neben den Klingen und den Schrauben nur…

Downloads
768
Likes
48
Rating
5
P
PrintablesWotan

Wheel for Husqvarna Automower 305

A spare wheel for the Husqvarna Automower 305. Since the originals are too expensive I have drawn this replacement. I hope that it is durable and also copes well with slopes. But that will show over time. Rim and profile are screwed,…

Downloads
555
Likes
61
Rating
5
P
Printablestechfreek

Ego Lawn Mower Bag Holder

I wanted a way to hang up the bag for my ego mower when I wasn't using it. I didn't find anything online/would work with the pegboard I had, so I came up with this. The top is angled out because I don't have much space above where I…

Downloads
513
Likes
93
Rating
4.8
P
PrintablesRobert Lacina

VITULUS robotic lawn mower

VITULUS is mostly printed mobile robot based on ROS. Visit https://lacina.dev or https://discord.gg/YqeNV5hEVN for more. You can see assembly of currently published parts in zipped .step file. Parts Wheel…

Downloads
458
Likes
152
Rating
5
P
PrintablesCoolBlackCat

Husqvarna Automower 308 Wheel - v.2.0

It is my own desing (no remix). The wheel has been designed to fit an Husquarna Automower 308. Print instructions PETG. The dimensions are set for the cover to hold without glue after treating both parts (wheel + cover) with epoxy (ex:…

Downloads
381
Likes
34
Rating
5
P
PrintablesHades

Segway Navimow 800

vycentrované použité závitové vložky do plastu M4 , šrouby původní ( v originálním balení jako náhradní s bříty 9 + 9 ks ) použil jsem ASA , určitě by vydržel i z PETG bílá barva na unašeči není vada tisku ani materiálu :-)

Downloads
224
Likes
14
Rating
0

Segway Navimow - ruler

A replacement for a paper ruler that fell apart after a few uses.

Downloads
195
Likes
15
Rating
5
P
PrintablesOndra

Ground screw for fix Husqvarna automower base

Ground screw for fix Husqvarna automower base https://www.az-shop.cz/cms/fiskars/products/automaticke-sekacky/nahradni-dily/pripevnovaci-srouby-pro-nabijeci-stanici-k-sekackam-automower.jpg

Downloads
115
Likes
11
Rating
4
P
PrintablesTomasíno

pokémon gigantamax mowth flexi

pokémon gigantamax mowth klíčenka

Downloads
87
Likes
9
Rating
0
P
PrintablesHades

Segway navimow ,drzák anteny

zakladna 100x100x107 tisk je z ASA vrstva 0.20 Vytvořen gcode pro MK4 stl soubor vsechny tiskarny

Downloads
81
Likes
8
Rating
5
P
Printablesbuchnema

Cover Pin for Einhell Cordless Lawn Mower

The original pins seem to get deformed quite fast (and get loose) as you can see in the first picture so I made a replacement. Printed with PETG they which will hopefully last longer. Original Einhell part number is 341313101058 Printed…

Downloads
42
Likes
16
Rating
5
P
PrintablesTimW

Black and Decker CMM1200/MM575 Mower Blade Insulator

Print with text up. use supports on build plate only.

Downloads
40
Likes
0
Rating
2
P
PrintablesSam

Rim Model "Scorpion" for 250mm Ardumower Wheel

This is a robust rim design for heavy outdoor activities (lawn mower). It can be combined with all tires using a 200mm dovetail tire interface DT200. Main characteristics: Dimensions: 200 x 40mm Mounting: 4 holes for M4 screws, distance:…

Downloads
28
Likes
1
Rating
0
P
Printablesmicael456

2-Part Robot Lawnmower Wheel & Tyre | Mculloch R600 / Husqvarna / Gardena

A remix of Sascha4532's excellent r600 wheel, split into two parts to allow for re-printing of the tyre as and when it wears out. The main wheel body can be printed in PETG or PLA, and the tyre was printed in TPU. You can use m5 bolts to…

Downloads
25
Likes
1
Rating
0
P
PrintablesGizmo Goody

Parametric Gridficiency (and Gridfinity) Thermoworks RFX Wireless Probe Charging Block Dock

Motivation I purchased a Thermoworks RFX Wireless Probe Starter Kit and wanted a dock to efficiently store and transport the probes in their charging blocks between the kitchen and my grill. Solution Design a custom Gridficiency-based…

Downloads
9
Likes
0
Rating
0
P
PrintablesCrazy3D

Verlegehilfe Begrenzungsdraht Mähroboter - tool for mower boundary wire

Boundary wire install tool robot mower - Verlegehilfe Begrenzungsdraht Mähroboter If you like it --> press like it :-) Tool to install the boundary wire for your lawnmower into a groove. Groove can be done with the tool in my other models…

Downloads
3,306
Likes
389
Rating
4.72
P
Printablesmahluni

Bumper / Kantenschutz für navimow i Serie - i105e und i108e

Einfacher Kantenschutz für die navimow i Serie. Sie sind straff entworfen, so dass ein Aufstecken genügt. Es ist kein Schrauben oder Kleben erforderlich. Ich habe mit PETG gedruckt / 100% Infill

Downloads
1,356
Likes
64
Rating
4.75
P

Lawnmower Blade Balancer

3D MODEL DESCRIPTION My father needed a blade balancer for his lawnmower blade this summer, so I designed him one. How it works: If the blade is unbalanced, one of the edges will weigh further down than the other. Then you have to remove…

Downloads
1,224
Likes
96
Rating
4.5
P
Printablesnerg

Spoiler suitable for Husqvarna Automower

My Automower has always lacked a bit of downforce on the rear wheels – so I designed this spoiler. It fits perfectly on the lid without interfering with normal maintenance or service. I highly recommend printing the spoiler with the fuzzy…

Downloads
1,200
Likes
128
Rating
4.5
P
PrintablesJoel

Rasengitter für Mähroboter / lawn grid for robot lawn mower

We bought a robot lawn mower back then, but after about a year of use, it started digging deep holes in the lawn. Due to our winding garden, there were many places where the robot had to turn on the spot. Due to the deep holes, he always…

Downloads
1,029
Likes
108
Rating
4.86
P
PrintablesGrumpyMakes

Segway Navimow Antenna mount

Simple 90 degree angle mount for the Segway Navimow i105e/i108e antenna. Designed to be printet without supports. Really sturdy with these print settings: 0,2mm layer height 3 walls 5 top and bottom layers 25% grid or gyroid infill If you…

Downloads
974
Likes
54
Rating
5
P
PrintablesMojo Doodles

Lawn mower gas tank cap

inside diameter 48mm

Downloads
973
Likes
73
Rating
4.88
P
PrintablesTreyvn

Lawnmower pull start handle

a print friendly replacement to your pull start lawnmower. My dog chewed mine up so i had to replace it. I havent printed yet cause i havent printed in ABS or PETG yet. if you print let me know how it works and if anything should be…

Downloads
944
Likes
56
Rating
5
P
Printableslutorm

Garage for Mammotion Luba lawmowing robot

Update : Version 1, printed in PETG, broke when it sagged and the Luba backed into it. Version 2 is easier to print since most pieces lie flat, but the number of parts went up to 8. It's also slightly larger than v1 so cover the Luba a…

Downloads
929
Likes
59
Rating
0
P
PrintablesKaot93

Parkside PMRDA / PMRA robotic mower Spikes

I was displeased with how well my mower was moving on my uneven lawn, so i designed and printed some spikes. They can easily be screwed in the wheel with small wood- or metal screws. The design can be a bit up scaled but it fits well how…

Downloads
898
Likes
65
Rating
5
P
Printablesvivamus3d

BRILL/ALKO Lawn Mower Gear Pinion (Sperritzel)

My good old lawn mower (push-mower BRILL RazorCut Premium 38) didn't work any more properly, because one of the gear pinions (Sperrritzel) was a bit worn and the wheel didn't drive the spindel reliable any more - it stopped every now and…

Downloads
855
Likes
10
Rating
0
P
PrintablesGolden4

Segway Navimow GPS 90° wall mount

This is a remix from @massis to mount the Navimow's GPS receiver with a 90° angle.

Downloads
852
Likes
38
Rating
4.67
P
PrintablesKokoBandit

Lawn Mower Blade Balancer

This is a remix to address some issues I had with the original design. Printing info: PLA 0.4mm nozzle 0.20mm layer height 15% infill [UPDATE 6/22/2026] Per request, here are the diameters for the steps on the original model as posted.…

Downloads
786
Likes
67
Rating
4.92
P
PrintablesChristoph

Replacement Wheel for Gardena R40Li robotic lawnmower

The original rubber came loose so we needed a replacement. It fits on the original tyre and can be screwed in place with the existing mounting holes. Printing: We used three walls and 20% infill with a layerheight of 0.3mm. For testing…

Downloads
780
Likes
61
Rating
5
P
Printablesgummigroda

Husqvarna Automower Wheel

My mower got stuck in the slopes in the garden in heavy rain with the original wheels. This is a wheel with more grip than the original due to larger spikes. This is a replacement wheel for the Husqvarna Automower that should fits these…

Downloads
725
Likes
53
Rating
5
P
PrintablesM D

Lawnmower Drive Handle Spare (MacAllister MLMP1600)

The original injection molded handle for the MacAllistar MLMP1600 Lawnmower is far too flimsy and is prone to splitting near its pivot point. (See image of blue handle) It was impossible to find a spare online so I decided to model it…

Downloads
706
Likes
21
Rating
5
P
PrintablesUncleFrankSays

UFS-067 Lawn Mower Funnel Long Reach Spout or Small Engine Oil Funnel

I’ve been collecting funnel ideas for awhile. I’ve downloaded parametric models that you can customize however you like. I also downloaded several with interesting shapes. This was all because I needed a funnel with a long spout to reach…

Downloads
677
Likes
77
Rating
5
P
PrintablesJeromy

Lawn Mower Blade Balance 2.0

I added the base that goes with the cone. I lost it years ago and had been using a nail to balance the cone. I forgot about the base when I made the first model. Printed with no supports in about 90 minutes.

Downloads
673
Likes
82
Rating
4.91
P
PrintablesPo3mah

GRASS REINFORCEMENT MESH (GEOGRID) FOR ROBOTIC MOWERS

If your robotic lawnmower digs in and destroys the grass on slopes, corners, around trees or shrubs, you can fix it with this geogrid. Just push/hammer it in the ground, and put some soil and grass seeds on top of it (or not). Grass will…

Downloads
620
Likes
93
Rating
5
P
PrintablesBrianMelgaard

Terrain Wheel for Stihl iMOW RMI Robotic Lawn Mowers

Enhance your robot lawn mower’s terrain capabilities with this wheel. Designed to fit both the Stihl RMI 422 and 632 models, it allows you to use the original wheel cap for a seamless upgrade. See the below video for installation…

Downloads
594
Likes
21
Rating
0
P
PrintablesWesVan

LyMow Scraper

UPDATE: I have added two more scrapers for the rear wheels. Although I am not using them on mine, they are available for anyone to try. They are basically the same as the angled front scrapers with a longer tab. You may have to snip the…

Downloads
530
Likes
25
Rating
5
P
Printablesmark

Lawn mower fuel cap replacment

My mower cap broke so ive designed a new one to 3d print. Thread has a 3 mm pitch with an internal DIA 46.5mm. I printed this from PET-G .12 layer for smooth threads. no supports needed. If you print one let me know.…

Downloads
519
Likes
50
Rating
5
P
PrintablesWolli

Wall mount for Segway Navimow power supply

Eine Wandhalterung um das Netzteil sicher aufzubewahren und zu schützen. Das Segway-Netzteil / Trafo Halterung passt zu folgenden EU-Mährobotern: Navimow H500E Navimow H800E Navimow H1500E Navimow H3000E / H3000E VF Navimow i105e Navimow…

Downloads
507
Likes
33
Rating
4.83
P
Printables2lisimst

Discharge chute (improved) for Ego Mower

I printed without supports and it built just fine. This will require several screws to be installed in the rear plastic housing. I used ½" length wood screws with a small pilot hole. The chute works really well, but must be un-installed…

Downloads
505
Likes
39
Rating
0
P
Printablesdavidja92

Mowcius radius fix with Bambu type connector

I took both Mowcius and the Bambu radius fixes and merged the press fit Bambu connector over. Mowcius connection is a twist then rotate but due to the manner of how the ptfe swivels there is potential that the connection can twist then…

Downloads
489
Likes
48
Rating
4.75
P
PrintablesAaaaah1

Segway Navimow Antenna mount 90°

Simple 90° angle mount for the Segway Navimow. I chose a design that is easy to print. I used PCTG for temperature resistance. 25% cubick infill 5 top and bottom layers 4 perimeters

Downloads
460
Likes
15
Rating
0
P
Printablesfente

Segway Navimow i105e + i108e Messerteller für 6 Klingen und + 2cm Schnittbreite

Vielen Dank an die Ersteller der Modellvorlagen, die Maße passten bei mir perfekt! https://www.printables.com/de/model/920133-segway-navimow-i105e-messerteller-fur-6-klingen-un…

Downloads
451
Likes
30
Rating
5
P
PrintablesDrew

Segway Navimow Traction Wheels i Series

Upgraded Wheel and Tread system for the Segway Navimow i Series! When I first got the Navimow I was so disappointed I was planning on returning it. It couldn't navigate the grass at all. It would get stuck left and right. I turned to…

Downloads
422
Likes
45
Rating
5
P
PrintablesAbílio Costa

Parkside robot lawn mower wheel spikes

Add some extra traction to your Parkside robot lawn mower! These fit really tightly to the wheel.

Downloads
416
Likes
44
Rating
0
P
PrintablesTobi Höher

Robomow Wheel right - SPP7021A

Hi, the wheel was created to give the mower "Robomow MC / RS / MS / TS / RC" a better grip and a cool look. ---------------------------------------------------------------------------------------------------------- It was pointed out to…

Downloads
407
Likes
27
Rating
5
P
PrintablesCrazy3D

Rasengitter 280mm für Mähroboter / lawn grid 280mm for robot lawn mower

Rasengitter für Mähroboter / lawn grid for robot lawn mower Mein Rasenmähroboter macht an manchen Stellen Löcher in die geschlossene Grasfläche. Um das zu verhindern habe ich das Gitter konstruiert. Es kann mit etwas Kraft, abhängig von…

Downloads
407
Likes
45
Rating
5
P
PrintablesJBoe

Grinding fixture for Husqvarna Automower Safety Blades

Object description: Grinding fixture for resharpening a Husqvarna Lawnmover Saftey Blade, alternative blades and similar blades for other electric lawnmover types. You can save about 8 Euro = 8 Dollar (at the time of publishing) per…

Downloads
382
Likes
51
Rating
5
P
PrintablesDr.Peter

Navimow Terrain Spikes

Glue the cap on. print solid or with 40+ infill.

Downloads
357
Likes
21
Rating
5
P
PrintablesScott

Segway Navimow i-series AirTag holder

The Segway Navimow robot mower has a compartment that is intended for their Navimow Access+ 4G Module cellular theft-tracking tracking accessory that is $150 USD and that doesn't even include the cellular fee you have to pay after the…

Downloads
355
Likes
34
Rating
4.67
P
PrintablesSylex3D

Riding Lawnmower

A model to honor the many hours spent upon the seat of a mower… Because who doesn't want a model of a lawnmower sitting on their desk? Like, download, and comment if you want to see more models like this! (And, perhaps, if you are feeling…

Downloads
343
Likes
45
Rating
0
P
PrintablesDimitri Fendel

Segway Navimow i105e Messerteller für 6 Klingen und + 2cm Schnittbreite

Messerteller für den Navimow i series. (getestet auf einem i105e, sollte auch für den i108e passen) 6 Klingen und 20cm Schnittbreite (original hat 3 Klingen und 18cm Schnittbreite) Benötigt werden neben den Klingen und den Schrauben nur…

Downloads
329
Likes
21
Rating
4.5
P
PrintablesSubsurf

Front wheel widening for Worx Landroid M500+ robot lawn mower

Here is my first post, after 1 year spent with my robot mower, I noticed that the wheel at the front deserved to be improved. So I tried to raise it and widen it. it is therefore suitable for the Landroid M500+ WR165E series . Print in…

Downloads
324
Likes
33
Rating
5
P
PrintablesEngineer

Lawnmower fuel Cap

Lawnmower fuel Cap

Downloads
318
Likes
12
Rating
5
P
PrintablesKen Levasseur

DeWalt Lawn Mower Key

My DeWalt lawn mower has a safety key. I've attached it to the mower with some string but wanted to print a backup in case the original key gets lost. To avoid having supports in the small grooves in the key (which are necessary), print…

Downloads
312
Likes
16
Rating
5
P
PrintablesChris

Lawn Mower Wheel with Bearings

Lawnmower Replacement Wheel! After breaking a wheel on my lawn mower, and unable to find a viable replacement. I decided to simply make a new one. This is a 2 part design utilizing both a “Wheel” printed in PETG and “Tire” printed in TPU…

Downloads
310
Likes
72
Rating
0
P
PrintablesMikolas Zuza

Cable fixing pin for grass (Compatible with STIHL iMOW)

Prints flat without any supports . You can use it to lay down the perimeter wire for your automatic lawn mower. You can also use it to lay down any cable you want this way. I used it for a 12V wiring for my garden lights. The grass will…

Downloads
308
Likes
148
Rating
5
P
Printablesmassis

Segway Navimow GPS mount

Mount for a Segway Navimow GPS antenna, made to fit on a standard 90mm wood beam as I wanted to mount mine up on top of our pergola in the backyard.

Downloads
308
Likes
20
Rating
0
P
Printablesvakul

Husqvarna Automower front caster wheel

Replacement front wheel assembly for Husqvarna Automower. You will need a set of two 626ZZ bearings (6mm inner diameter, 19mm outer diameter). Axle locker can be replaced by a 6mm star lock washer. If you decide to print the locker, make…

Downloads
308
Likes
28
Rating
5
P
PrintablesMark_McQ

1/10 RC Rim - Mowmow

Designed to fit a standard 26mm tyre. +3mm offset, 12mm hex. For personal use only. No commercial sales.

Downloads
308
Likes
61
Rating
5
P
PrintablesRaza

Angled Funnel for adding Lawn Mower Oil

use this funnel to add oil to your lawnmower... print with wide part of funnel on build plate...no supports needed

Downloads
302
Likes
39
Rating
5
P
PrintablesSnille

Automower Wire Spike

This "spike" you can use to fasten the guide wire and/or the perimeter wire for your Automower. It only has 3 sides, because I wanted it to be printable sideways (to strengthen the part). But it works very well anyway. The two last…

Downloads
298
Likes
34
Rating
5
P
PrintablesCrazy3D

Boundary wire groove tool mower robot - Kerb-Werkzeug für Begrenzungsdraht Mähroboter

Boundary wire groove tool mower robot - Kerb-Werkzeug für Begrenzungsdraht Mähroboter If you like it --> press like it :-) Tool to make the groove for the boundary wire of your lawnmower. It worked at my lawn at wet condition, one day…

Downloads
297
Likes
75
Rating
5
P
PrintablesGabcoppo

High grip wheels for Robomow RC304

High-grip wheels used to improve the traction of the robot mower in wet and sloped conditions.. Fit only with Robomow RC304 Print instructions No support needed

Downloads
294
Likes
5
Rating
4
P
PrintablesStigern

Lawn Mower Garden Gnome

Lawn Mower Garden Gnome – The Yard Work Hero! Bring charm and chores to your garden with this delightful Lawn Mower Garden Gnome! Few supports are needed. I used organic-style supports, which peeled off cleanly with minimal effort.…

Downloads
294
Likes
54
Rating
0
P
PrintablesDr.Peter

Husquarna Automower Front wheel replacement

this is still a work in progress. but print with abs, ASA or PETG for best results with adaptive layer Hight. The small part is supposed to pressfit on the axel.

Downloads
293
Likes
27
Rating
0
P
PrintablesPajaa

Makita Lawn Mower Switch Lever clip

I made for my wife a clip to hold switch lever, because spring is quite strong and she feel fingers pain after a while. Clip is used on our battery Makita Lawn Mower DLM460. Handle diameter is 28mm. Use on you own risk!

Downloads
293
Likes
30
Rating
5
P
Printablesmizutani_hu

Traction Assist Wheel for Parkside PMRDA 20-Li B2 robot lawn mower

3D-printed auxiliary wheel for Parkside robotic lawn mower, designed to mount onto the drive axle to enhance turning capability and traction on grassy or slippery terrain. The toothed outer edge improves movement efficiency, while the…

Downloads
292
Likes
30
Rating
0
P
PrintablesTobi Höher

Robomow Wheel left - SPP7021A

Hi, the wheel was created to give the mower "Robomow MC / RS / MS / TS / RC" a better grip and a cool look. Replaced the original Robomow wheel SPP7021A. The two extra holes would be for an aditional hubcap. Looks like a tractor tyre with…

Downloads
282
Likes
20
Rating
0
P
Printables3DPrintoTech

Roue Husqvarna automower 220AC

J’avais commandé des roues d’origine, mais les pneus n’ont pas tenu la saison. La tondeuse a un meilleur grip avec ces roues :-) Imprimée sur Prusa XL en 2 matériaux, en Prusament PETG-CF et easyprint TPU pour la roue et en PETG pour la…

Downloads
274
Likes
18
Rating
5
P
PrintablesThomas

Segway Navimow i105/i108 Messerschutz + Messerteller

Messerteller ist 220mm groß mit Messerklingen 254mm Schnittbreite mehr geht nicht. Messerschutz wurde auch erneuert und für den größeren Messerteller vergrößert. Mähgeräusche etwas lauter. Mähtest laufen noch. Was benötigt wird…

Downloads
267
Likes
14
Rating
0
P
PrintablesEmil Pind

Peg for lawn mower boundary cable

Designed a sturdier design because all other I tried kept breaking even when only using a rubber mallet. This design is slim, and work way better than the original provided with my robotic lawn mower from Husquarna. Printed in 0.2 layer…

Downloads
263
Likes
26
Rating
4.75
P
PrintablesJeff Nee

Thermoworks Signals System Holder

This is a storage and use solution for the Thermoworks Signals BBQ System. The system is comprised of the Monitor itself, 3 color-coded Food Probes, 1 color-coded Ambient Chamber Probe, a clip to hold the Ambient Probe off of the surface…

Downloads
263
Likes
40
Rating
5
P
Printables3DD

Security Key for PARKSIDE PRMA 40-Li C1 lawn mower

Following the golden spare part 3D printing rule “Create a backup model before the part breaks or is lost.”, I created a model of the security key for the PARKSIDE® PRMA 40-Li C1 lawn mower. Printed in PLA+ with 0.2 mm layer height, 0.8…

Downloads
261
Likes
18
Rating
5
P
PrintablesSean Dearing

Gridfinity - Manscaped Lawn Mower 5.0 and Weed Whacker 2.0 Storage

I created this storage case for the Manscaped Lawn Mower 5.0 and Weed Whacker 2.0 that I purchased as part of their Platinum Package 5.0 Ultra. All the tools that came with this kit fits inside a 3x5 Gridfinity storage bin. Included are…

Downloads
257
Likes
56
Rating
4.5
P

Lawn Mower Brand Emblem Keychains

These sleek branded keychains make your mower keys stand out! Two versions included: 4mm thick - durable, solid print; great for rough yardwork 2mm thick - nice, quick print; feels slightly flimsy Be sure to change filament halfway…

Downloads
248
Likes
70
Rating
0
P
Printablesagent462

Husqvarna Automower 450X Wheel

4 Top and Bottom Layers 20% Infill I printed with Supports and the remove pretty easy from the studs. With these settings these wheels are wider and lighter than the stock wheels. Category: Other

Downloads
248
Likes
24
Rating
4
P
PrintablesEspeloev

Segway Navimow Side Bumper H-Series

Replaces the OEM "skirt" and adds extra bumper width on the right side to avoid getting stock around sharp corners. Scanned the shape with a “Revopoint Miraco PRO 3d” Scanner for optimal fitment.

Downloads
247
Likes
11
Rating
5
P
PrintablesEnbee2009

Ryobi One+ Battery Lawn Mower Trigger

I designed this to suit my model OLM1836H, but it may suit other models. This orientation is for the Right Hand Side, but mirror if you need the left. PLA will work, but may have a limited life, I recommend printing in ABS or PETG and use…

Downloads
246
Likes
12
Rating
4
P
PrintablesLastMove

RYOBI Lawn Mower Battery Holder (RYOBI ONE+ 18v Batteries)

Carry extra RYOBI ONE + 18V batteries onboard your Ryobi lawn mower so you don't have to waste time going and getting fresh batteries in the middle of mowing. This was specifically created to fit on the Ryobi P1100, but this should fit…

Downloads
243
Likes
67
Rating
5
P
PrintablesMichal K

Lawn mower deck scraper / spatula

Mine is created from Nylon, but any other material should work too. Dimensions: 110x70mm Happy mowing!

Downloads
240
Likes
39
Rating
5
P
Printables3ddk

Cable Clip for lawn mower

I lost some cable clips, so i printed my own spare parts. I tried to keep them as close as possible to the originals (but with 3d printing in mind). These fit perfectly on my Stiga Combi 50 S AE lawn mower. Try to use much infill to make…

Downloads
236
Likes
48
Rating
5
P
PrintablesBartBE

grip enhancer compatible with Robomow RS series

These slide onto the (standard) weel of a Robomow RS series robotic lawnmower and increase the grip of the robot, in case you find that your original wheels don't provide enough grip. You need to print the object 3 times per wheel, which…

Downloads
232
Likes
6
Rating
0
P
Printablespittance

Bosch Rotak 32R Lawnmower Pulley/Fan - Version 2.3

My Bosch lawnmower stalled and melted its drive pulley - I designed and printed a replacement Update 21June 2016 It finally died - the mower ate a chunk of wood which jammed it and caused grievous harm to the pulley and tension bearing…

Downloads
231
Likes
6
Rating
0
P
PrintablesBC71

Riding Lawn Mower Cup-Phone Holder

Designed to fit Husqvarna TS 142 Riding lawn mower cup holder. Phone slot is for Iphone 14 Pro Max with case.

Downloads
230
Likes
36
Rating
4
P
PrintablesHans

Rear wheel for Gardena R40LI Robot Lawn Mower

My robot lawnmower has a poor design for the rear wheel. When the lawnmower turns, it drags the wheel sideways. It tears up tracks in the lawn. And when it turns on my stone paving next to the lawn, it wears down the wheel. The wheel is…

Downloads
228
Likes
35
Rating
5
P
PrintablesReckit

Fuel Cap - Mountfield Petrol Lawnmower

Fuel Cap for Mountfield SP180. Fits perfectly, not sure which other models it fits Print instructions Print top side down Requires supports for the underside, not internally. Use custom supports as auto support will generate supports for…

Downloads
224
Likes
10
Rating
0
P
PrintablesQuickset45

Replacement pull start handle for chainsaw, lawnmower, leaf blower etc.

This is very close to the original ICS 695 concrete chainsaw handle. I printed with 100% infill.

Downloads
221
Likes
182
Rating
5
P
PrintablesQuinlan Smith

Replacement Parts: Black MAX - 1 for 1 - 8in Lawn Mower Wheel

8" Push Mower Wheel STEP file has 3 parts for no support printing as well as multi-material printing. Axle - No Bearing required (some sort of lubricant helpful) Diameter: 13.5mm (0.53in) Depth: 32mm (1.26in) Direct front 8" wheel…

Downloads
219
Likes
37
Rating
0
P
PrintablesTritschi

Studded Spike Wheel for Landroid Worx Robot Mower

This is a remix from "Studded wheel for Worx Landroid by hasherdk on Thingiverse: https://www.thingiverse.com/thing:4484401 ". Thingiverso did not let me enter this in its Remix Field. Design is not proven on a real mower. So before…

Downloads
218
Likes
11
Rating
0

Mammotion Luba Mower RTK Reference Station Pole Mount

This is a quick set of brackets for mounting the Luba RTK reference station pole somewhere. I used it to mount the pole to the side of a barn so that the reference station could be above the roof for a better view of the satellites. The…

Downloads
216
Likes
16
Rating
0
P
PrintablesMan Dingo

Luby-Dooby Robot mower cleaning tool

Idea tool for cleaning Luba mowers without taking off the disks. Cleans underneath the adjustable deck solving issues with grass jammed.

Downloads
215
Likes
16
Rating
5
P
PrintablesBill Stone

ThermoWorks Billows Fan Adapter for Oklahoma Joe Bronco Drum Smoker

This is a ThermoWorks Billows fan adapter to fit on the air intake pipe of an Oklahoma Joe Bronco Drum Smoker (regular or pro model). The air baffle has to be removed as this fits fairly snug over the pipe. It's angled a bit to keep light…

Downloads
212
Likes
5
Rating
5
P
PrintablesClemens Elflein

OpenMower GPS Mount for YardForce Classic 500

This is the GPS mount I'm using to mount the UBLOX RTK GPS antenna inside my YardForce Classic 500 mower. In the picture you can see a mount for an external IMU, but this won't work since the UBLOX antenna has a magnet in its base.…

Downloads
209
Likes
13
Rating
0
P
PrintablesEgorka555

Front wheel Husqvarna Automower 430x

For printing these parts, it is recommended to use PET-G. For greater tightness, print at a speed of 50 mm/s and with an elevated nozzle temperature. Use self-tapping screws (25–35 mm) as shown in the figure. Original tires can be reused…

Downloads
208
Likes
15
Rating
0
P
Printablessclem

Mower Wheel Retread

Designed to be an alternative to replacing the lawnmower wheels when you have no tread. This print fits around the existing wheel to give your mower a new tread. This is a less expensive and easier fix to replacing all the existing…

Downloads
203
Likes
41
Rating
5
P
PrintablesTheWortLord

Zero Turn Lawnmower Keychain

Needed a keychain for my zero turn mower. Enter this simple two color print to get the job done. 4/11/2025 - I've added two new models that increase the height of the mover design.

Downloads
202
Likes
16
Rating
0
P
PrintablesChris Jedd

Lawn Mower Blade Height Gauge

Height Gauge for determining the height of your lawnmower blade or levelling the deck of a riding lawn mower. Gauge.3mf includes all of the settings I used with my Prusa MK3S and MMU2 for multi-material printing to print the gauge numbers…

Downloads
200
Likes
31
Rating
0
P
PrintablesNate42

Lymow One Lawn Striping Roller (V3.2)

This 3D model is a BETA Test, so use at your own risk and inspect it frequently for damage but it allows you to mount a 1.5in x 12in Stainless Steel Conveyor Roller to your Lymow One or One Plus to add more defined lawn stripes to your…

Downloads
199
Likes
21
Rating
0