MUJI-Belt Adapter for PREDUCTS DESK
DESKのレールにひねって接続するときの負荷が大きいので、しなり・粘りのある素材(ABSなど)での出力をおすすめします。 (当初PLAで出力したところ、耐えきれず割れるケースがありました)
Print approx. €0.51–€0.62 excl. taxPreliminary estimate for one variant
- Downloads
- 39
- Likes
- 1
- Rating
- 0
56 models
DESKのレールにひねって接続するときの負荷が大きいので、しなり・粘りのある素材(ABSなど)での出力をおすすめします。 (当初PLAで出力したところ、耐えきれず割れるケースがありました)
Print approx. €0.51–€0.62 excl. taxPreliminary estimate for one variant
I want to add my own custom notebook/journal page into A5 ring binder notebook but can't find the easy way to do it. I have Muji and Kokuyo binders so I design the jig that will work for both. This jig should be working with a 6mm single…
Fountain pen tray that fits in the Muji storage case.
This a pen adapter for the Cricut Maker machine to allow the use of a Muji pen.
My Aluminium telescopic pole for the Muji Cleaning System has cracked maybe due to excessive force applied onto the stick. I can't be bothered to get another one, as I believe it will crack again, so I decided to reuse my painter pole…
Gridfinity that fits a Muji Ruler (https://www.muji.com/my/products/cmdty/detail/4549738728894) and a 15cm Ruler
Powered by Image-to-3D from MakerWorld (https://makerworld.com/makerlab/imageTo3d)
This is a holster for a Bosch heatgun, made for a Muji storage rack. You can easily modify to fit your setup. You'll also need 2x M3 x 30 screws and 2x M3 nuts. Print instructions Print with PETG or PLA, 0.2mm.
Pen case divider Customizable - Muji pen case divider Customizable version Included parametric Fusion 360 project with easy to edit parameters: add your name or logo to make it yours! MUJI pen case version I've also included a version…
12 slot divided storage tray for Muji's 5 drawer acrylic storage . Great for holding things like fountain pens, boring normal pens, and even pencils. I have multiple of Muji's 5 drawer acrylic storage, and there's a tiny amount of…
1x1x6 Gridfinity Bin that holds 4 Muji Pens.
Hi all! Thanks for checking out my model. These are a set of bathroom cups and trays based on ones I saw at Muji (a Japanese stationary/goods store) in Boston. They also work great for pens or as general catch all trays too! The tray can…
Simple storage container for small parts like screws, electronics components etc.
The holder is made for a light blub socket with the following dimensions: 5.5 cm tall and 4.2 cm in diameter. Print the lampshade in vasemode!
Muji Double Ruler https://www.muji.com/my/products/cmdty/detail/4549738728931 Dimensions: Inner Length - 160.5mm. Inner Depth - 15mm. Suggested print settings: Layer height 0.2mm. Infill 15%. Perimeters: 5. No supports are needed but…
this is a muji Ballpoint Pen holder
Do you have a MUJI Aluminum fountain pen and don't keep an extra cartridge in the body? Why not turn it into a pocket pen?! This part is super tiny, so tolerances were tough. I printed it at .1mm layer height, supports on the bottom part…
Mujika's Lantern - The Promised Neverland Manga This is for all the escaped children and cosplayers looking for something to light their way from the horrors of the non-existent S2. Handle x 1 Top x 1 Bottom x1 Lock x1 Plant Holder x 1…
Simple pen-holder for Muji Gel ink pens: https://www.muji.eu/pages/online.asp?Sec=13&Sub=52&PID=11047 This one is designed to hold 6 pens. Also have included a STEP file for those that want to modify the model
Cable Holders for MUJI Shelving Unit. I recommend to use PETG, but PLA works fine. 無印良品ユニットシェルフ用のケーブルホルダーです。 PETGの使用をお勧めしますが、PLAでも問題ありません。
This is the Wall mount Holder for MUJI Acrylic Collection Case. Use the KABEBIJIN bracket. See this site for more information. Sorry, This site is Japanese only. ( https://kitto-yakudatsu.com/archives/229 ) Print instructions Category:…
Splits MUJI 37×63×12mm polypropylene pill box into six compartments. Prints slightly too large (for a snug fit) so just file off ½ mm or so after printing.
This is a replacement for the original rubber(?)-feet of the Muji polypropylene Storage Boxes. As I've lost several of these parts I decided to design one for 3D-printing. The design is not exactly identical to the original piece, but…
Spacers for a snug-fit of Gridfinity baseplate inside a MUJI PP storage box
A Garbage Tamper attachment for the Muji telescopic handle.
Home for Muji Memo Block memo pad with easy access to rip off individual pages or to pick up the whole pad. It takes up 3x3 Gridfinity Slots. Printed with Polymaker Polyterra Peach
Hook for Nature Remo mini to be mounted on MUJI Unit Shelves. Twist hard when removing. Nature Remo miniを無印良品のユニットシェルフ(またはユニットシェルフデスク)に引っ掛けるためのフックです。 取り外す時は強く捻ってください。
This is an attachment for the MUI Telescopic handle for performing Rotator Cuff stretches.
A replacement Muji umbrella handle. Somehow, I lost the handle to my Muji umbrella, so I designed a new one. It's light, small, and screws on easily. It's an easy print without supports. I used OnShape to sketch it out.
This dustpan is designed specifically for the Muji brush that we have. Doubles as a stand to save space and is ambidextrous. Depending on Muji's wooden handle tolerances it may need to be scaled very slightly. I suggest test printing, and…
A container for a Muji pump dispenser. 67.5 mm x 67.5 mm interior Refill Bottle. Main body is 107.77 mm tall. Size are for the volume. Hole in the bottom for water drainage. I can make some other sizes on demand if people find it useful!
A holder for your MUJI mechanical pencil sharpener or any that can fit. It stops the sharpener from sliding around and keeps it in a safe place, clears up necessary desk space, makes it easier to use in crowded environments, prevents the…
Muji food containers conveniently stack into each other, but the lids don't. This rack holds the lids neatly, and can be mounted on the wall or inside the cupboard. It has areas for the double-sided tape, and holes for #8 screws.
Very likely you'll need to download the Fusion 360 file and adjust the tube diameter parameter base on the tolerances of your printer, filament … and the tubes themselves. Design notes: 20mm height seems to be a good compromise between…
Holder & Spacer for MUJI Joint Taps (power strips) mounted on MUJI Unit Shelves. 無印良品のジョイントタップをユニットシェルフ(またはユニットシェルフデスク)の帆立に引っ掛ける時に使用する「ジョイントタップロック付用ユニットシェルフ帆立取付パーツ」が、ジョイントタップの背面から外れ難くするためのホルダーとスペーサーです。
I'm a fan of the MUJI pillcases as they're modular and great for travelling - allowing you take everything, but pocket a day or two's worth for short trips. I created this to keep two weeks worth conviniently and clearly stored, but keep…
I wanted to add a Gridfinity bin for my Muji shredder but only found options for single-end or for having it laid flat which used more space. I made this design to allow it to be stored vertically to reduce the amount of grid space…
Based on A4 storage box from 無印良品. https://www.muji.com/jp/ja/store/cmdty/detail/4550002555702 Each box contains a digital pressure/temperature/moisture meter (BME280), an RGB LED (PL9823), and a DB9 connector for a straight-rs232 cable.…
Clear Travel Mug https://www.muji.com/sg/products/cmdty/detail/4550512399964 Suggested print settings: Layer height 0.2mm. Infill 50%. Perimeters: 5. No supports are needed but follow the suggested print orientation for ideal results. If…
https://muji.ca/products/acrylic-stand-for-glasses-and-small-items
to dry dish cloth or hung sometihg, needs 9.5mm metal pipe (stainless steel)
Inspired by @InvaderAkira and @squinn organizer system. I made a simple storage for Muji cable organizer/winder. The STL fits 6 Muji cable organizer/winder. Use slicer to adjust width to fit your needs.
Extra dividers for this Muji 6 Drawer Unit. That's a pretty generic name so I included pictures from Muji of the drawer unit, which can be built vertically or horizontally. I needed some extra dividers as it only came with 6 but there are…
Japanese retailer Muji makes a lovely affordable high quality screwdriver set, but the case they provide is flimsy and will break over time. Attached is created using Autodesk Fusion, Claude and the Fusion Ai tool. It has been tested…
Insert for Muji's pencil case, capable of holding 5 pens on the main compartiment, alongside a ruler, 2 erasers and a sharperner with 4 additional highlighters on the lid. In order to fit everything tight inside and still be able to close…
Welcome to the world of Ave Mujica. (ようこそ。Ave Mujicaの世界へ) I believe there are many MyGo!!!!!/Ave Mujica/Crychic/Sumimi fans purchased this beautifully made and fully loaded Blu-ray box set, and realized there is no magnet or so to keep…
My dog chewed up the cheap plastic package for my muji screwdrivers so I designed this case to hold them securely with minimal rattling.
Just the right amount of pressure: 1-to-1 clicking pressure reproduction. If your prints don't fit, it's time to recalibrate your printer! Print with brim
Few additions to MUJI PP wide file box (150 x 320 x 240mm) to function as filament drybox from where i can print straight away. It fits the original vacuum formed filament holders and has hole for which i created screwable passtrough…
A replacement lid for Mujis acrylic stackable cosmetics containers. Don't know if it's me, but I have broken a bunch of these because the acrylic Muji uses is crazy brittle. The thread on them is also VERY custom and I tried by best to…
This tag is made for the strap-end for the MUJI Nylon Mesh (Vertical/Horizontal) Pen Case . Printing Notes: Print with a 0.4 nozzle for better bottom-text legibility. Printed the piece shown in the picture is with a 0.6 nozzle. Do a layer…
Embedded a 2.7 x 10mm magent at layer 30. Printed with 0.1mm layer height in PLA.
A container for a Muji pump dispenser. 67.5 mm x 67.5 mm interior Refill Bottle. Main body is 107.77 mm tall. Size are for the volume. Hole in the bottom for water drainage. I can make some other sizes on demand if people find it useful!
Very likely you'll need to download the Fusion 360 file and adjust the tube diameter parameter base on the tolerances of your printer, filament … and the tubes themselves. Design notes: 20mm height seems to be a good compromise between…