Counting matching models…
Take your soldering setup to the next level with this modular, organized soldering workstation , designed by Aaron Rollens and built for real-world use at FIRST Robotics World Championship . This setup combines an 80/20 extruded aluminum…
This is a simple spray bottle holder for use with MultiBuild plates. You need 2 of the MultiConnect connectors. Fits bottles up to 3mm wide at the trigger / head. No supports needed.
Lets you get a DeWalt DCB115 battery charger off the counter; it may work for the lower power charger too. I'd recommend orienting the print so that the smaller bottom side is on the bed, so that the layer lines are strong for the charger…
Had some pens on my desk that i wanted to clear out. So made this with a couple of compartments. You would need a Rail popin of your choice. Personally i used a Bolt Locked Insert OXO Rail Pop-in to mount mine - but im sure any other…
This will require supports. I printed PLA with auto-generated PETG supports, Organic style and 0 (soluble) as Top contact Z distance. To use less support material you can print the holder lying down, if you can deal with the large…
Lets you get 20v DeWalt batteries off the counter. I'd recommend orienting the print so that the smaller flat side is on the bed, so that the layer lines are strong for the battery weight. I'd increase the number of walls as well for…
Keeps your socket set in reach. The print should be oriented correctly in the file. I'd increase the number of walls as well for strength. I printed mine in PLA; unfortunately I don't have my print settings saved, as I designed this…
Backstory In my ongoing quest to keep my workspace tidy and my headphones easily accessible, I found myself searching for the perfect headphone and cable holder for the Multiboard/Multibuild system. To my surprise, nothing quite fit the…
Multiboard/Multibuild holder for your Bil Tema Multimeter (art. 15-133) You would need a Rail popin of your choice. Personally i used a Bolt Locked Insert OXO Rail Pop-in with a Folded Locking Bolt , but there are multiple other options…
Support only for the upper hex slot. Recommended to print out of something more solid than PETG. PC would work the best.
Modified my own model for Multiboard: Way to get larger things off the counter and on Multiboard. I'm using mine to hold some headphones near my desk. I'd recommend orienting the print so that its on its side on the bed.. I'd increase the…
Add a bin to your Multiboard wall !
If you just want to attach it directly to a wall, use these attachment points . Use as many as you want, minimum 2. Space them out at any interval of 25mm. This battery dispenser features an S-shaped magazine to reduce jamming risk.…
Bahco five-piece metal file set that i needed a holder for. The only non-original part is the multibuild pegs for obvious reasons.
A phone holder for Multiboard/Multibuild. Slides easily on to 2 multiconnect parts - can be found here: Small hole in the center to allow a charger to be attached while phone is in the holder. Max phone width and depth: 80x14 mm
Original authors Narex chisel model with Multibuild/Multiboard pegs instead of HSW mount.
UPDATE: V2 IS HERE V2.0 lowered the body of the holder slightly relative to the attachment point for added stability. This helps it to stay attached to the board, which was a problem previously. V2.5 added a second attachment point;…
Print with 0.4mm nozzle, 0.2mm speed (or whatever profile your printer does), PLA and default settings (my printer is a Prusa XL 5T) Designed for Narex files and rasps with the handle ferrule at the bottom being 19mm at the bottom of the…
This is another great Multibuild compatible holder for storing one screwdriver. I designed this to fit my specific screwdriver, so it may not fit yours. If you like Multibuild, check out some of my other designs.
Better bolt gripping with square S3 bit instead of coin slot Extended from 9.5mm to 16mm to better secure my 10mm thick tool holders Check out the rest of my custom collection
Ridgid Charger mount Used Small Thread - Fix Point to connect to the multiboard
Only tested with a Stanley PowerLock 25ft tape, but figured the dimensions of it would exceed most tapes, so this should support in theory any tape. I also designed the overall depth such that the springing clip stays opened, which I…
This is a build plate holder for MultiBuild that holds up to 5 3D printer build plates. Fits plates up to 1.3mm thick. Compatible with pretty much any brand of plate. You need 2 of the MultiConnect connectors.
Designed for mounting a Dewalt atomic drill upside to the Multiboard but can work for most battery powered tools with a flared bottom for the battery. Tested with Dewalt and Ryobi tools Components needed 2 4x4 support bracket 4 locking…
Just a shorter version of find all instructions there
This is a model I designed to mount a JBL speaker onto multiboard. The best print orientation I've found is with the atachment point facing up using suports under the end points. It can also be used as a holder for other items of similar…
Multibuild Multiboard Tool Wall Use a locking T-Bolt to attach the tool holder to the support bracket . Use a moderate or heavy weight bearing snap for top connection of the support to the multiboard and normal snap for the bottom…
The current Multibuild nameplates for drawers etc do not fit the models so i made a fixed 77,5mm wide plate with 40 degree chamfers that fits perfectly the current drawer models. Use the step or freecad model files for customizing your…
This is a great small pen and pencil holder designed to hold generic Bic mechanical pencils and pens of similar sizes. Fits perfectly into the multibuild ecosystem and holds 3 pens/pencils comfortably. I've found that it prints best with…
This is another great addition to your Multibuild ecosystem. There are two variations, one that holds 4 bits and another that holds 3. These work really well. If you like this design, check out some of my others.
Made a very simple holder for my large screwdrivers.
Two or four of the same part can be used to bolt into each corner of a 19" 1U device. The four snaps and 1U device will in total consume 20x2 CU (500mm x 50mm). Smiley face up, sour face down. Of the two holes, the one closest to the…
Easily attach and secure Tenda SG105 to Multiboard (Multibuild) grid. horizontal / vertical version securing snaps for vertical version to avoid slide-off Vertical mounting: attach Tenda SG105 onto two pegs, slide it "to the end" snap-in…
I have created this holder for the Parkside PAGG 4 A1 engraver from Lidl as there doesn't seem to be any other holders that fit this device already available. At the side is a slot for the plastic templates which come with the device. I…
An attachment to the MultiBuild system (formerly MultiBoard) that lets you attach the CoreONE nozzle change holders by Prusa Research. There are 3 parts to this: 2 holders, one for the sock version and another for the no-sock version. The…
A holder for up to 8 unicorn nozzles in their tubes for Multiboard/Multibuild. Slides easily on to 2 multiconnect parts - can be found here:
Printed with same settings as the original. This just adds a different mount on the back.
An assembly-style model consisting of two pegboard mounts and a docking station platform. Assembly requires four M3*6 screws, four M3 nuts, and—optionally—four washers.
A custom Multibin insert designed to organize resistors, capacitors, and other through-hole components. The standard divided inserts are just barely the wrong size for storing components and either are too big or too small. This insert…
I loved the Multiboard mount made by @BrettHampton_325208 for Ikea RÅSKOG and RÅSHULT utility carts, but I found the regular snaps used in the original model to be a bit too loose for my taste. With this remix the boards stay on tight…
a connector for 2 or more multibuild lite panel. This corner gives the grip more stability, and you can screw it to the bottom with a 3 mm countersunk screw or doublesidet tape. There are two versions, one for four corners and one for the…
Remixed from Joen_P's remix of the original Wiimote holder from SilverSasquatch, this was modified for use with the Multiboard/Multibuild system. The mounting holes were moved to fit the 50mm "small thread" spacing in the multibuild…
Holds an Aranet4 CO2 sensor at a 45-degree angle. This would be useful in a situation where you are perpendicular from the Multiboard. This mount slots into the keyhole on the back of the sensor, allowing for hardware-less mounting.…
Multibuild Multiboard Jsaux Nintendo Switch 2 Dock Mount Mounts a Jsaux 7-in-1 Nintendo Switch 2 dock (HB0704) under your desk or to the wall Mounts to Multiboard or Multigrid using a 13mm Small thread bolt No supports needed Works well…
MultiBuild Gamesir Super Nova Mount MultiBoard, MultiGrid compatible Designed for GameSir Super Nova but could fit other controllers No supports needed
Print with 3 perimeters laying on the side with support. If printed laying flat on the back, the pegs will snap.
Multiboard/Multibuild holder for your Bil Tema Multimeter (art. 15-133) You would need a Rail popin of your choice. Personally i used a Bolt Locked Insert OXO Rail Pop-in with a Folded Locking Bolt , but there are multiple other options…
Backstory In my ongoing quest to keep my workspace tidy and my headphones easily accessible, I found myself searching for the perfect headphone and cable holder for the Multiboard/Multibuild system. To my surprise, nothing quite fit the…
Had some pens on my desk that i wanted to clear out. So made this with a couple of compartments. You would need a Rail popin of your choice. Personally i used a Bolt Locked Insert OXO Rail Pop-in to mount mine - but im sure any other…
Take your soldering setup to the next level with this modular, organized soldering workstation , designed by Aaron Rollens and built for real-world use at FIRST Robotics World Championship . This setup combines an 80/20 extruded aluminum…
This is a simple spray bottle holder for use with MultiBuild plates. You need 2 of the MultiConnect connectors. Fits bottles up to 3mm wide at the trigger / head. No supports needed.
This is a build plate holder for MultiBuild that holds up to 5 3D printer build plates. Fits plates up to 1.3mm thick. Compatible with pretty much any brand of plate. You need 2 of the MultiConnect connectors.
Easily attach and secure Tenda SG105 to Multiboard (Multibuild) grid. horizontal / vertical version securing snaps for vertical version to avoid slide-off Vertical mounting: attach Tenda SG105 onto two pegs, slide it "to the end" snap-in…
Lets you get 20v DeWalt batteries off the counter. I'd recommend orienting the print so that the smaller flat side is on the bed, so that the layer lines are strong for the battery weight. I'd increase the number of walls as well for…
Keeps your socket set in reach. The print should be oriented correctly in the file. I'd increase the number of walls as well for strength. I printed mine in PLA; unfortunately I don't have my print settings saved, as I designed this…
Modified my own model for Multiboard: Way to get larger things off the counter and on Multiboard. I'm using mine to hold some headphones near my desk. I'd recommend orienting the print so that its on its side on the bed.. I'd increase the…
Lets you get a DeWalt DCB115 battery charger off the counter; it may work for the lower power charger too. I'd recommend orienting the print so that the smaller bottom side is on the bed, so that the layer lines are strong for the charger…
