Tesla (NACS) Wall Charge Plug Holder [remix]
NACS plug holder
- Downloads
- 319
- Likes
- 21
- Rating
- 4.67
Counting matching models…
NACS plug holder
This model supports hanging charging cables from the wall and stores the charger plug in the same piece. Use 2 fasteners to attach it to the wall. I've also included an option for a logo if desired. I recommend printing this in PETG over…
Tesla NACS mobile charge wall mount cable organizer and plug holder
Crudely made but very functional. Should fit all currently available NACS to CCS adapters. Use it to hang your adapter out of the way in your frunk for safe keeping. Strong enough to easily support the all metal Lectron adapters. Not the…
Just got a new Rivian R2, and I needed a place to store my Rivian shop provided J1772 to NACS and CCS1 to NACS adapters where they wouldn't rattle around and make noise. this fits in the trunk cubby behind the driver side, right below the…
Tesla/NACS wall mounted holster. Remix of previous model to refine the look of the design. Link to onshape file:…
A holder for the two NACS adapters (CCS & J1772) that are delivered with the 2025+ Hyundai Ioniq 5. Fits underneath the storage area in the console. My car has the sliding console, I am unsure if this will also fit on the fixed console. I…
Here are some protective covers for your NACS to CCS adapters. I only have access to the ones from Rivian (made by Telsa) and Ford (made by Lectron), so that's what I've included so far. They're meant to protect the internal connectors…
Just a quick remix to rotate the dust cover to the correct angle.
EV Charger Wall Mount This mount is compatible with Tesla and NACS EV chargers (Ford, GM, Rivian, Volvo, Polestar, Mercedes, Nissan are all rolling out this charging standard by 2025). It is an assembly of two parts, the wall plate which…
OpenSourceEV Parts designs, produces, and shares 3D‑printed parts for Rivian EVs. Staying true to our open‑source mission, every product we create comes with free STL files so anyone can remix, customize, or print at home for little to no…
Holster your J1772 with Tesla/NACS adapter on the wall in a weather safe manner. Print in PETG, ABS, ASA, etc. for UV protection. 30% gyroid infill worked well for me. Mounting holes tested with Tapcon 3/16 concrete anchors.
Mach-E NACS Adapter Holster with dust cover for DC pins
This wall mount is useful if you already have a Tesla Wall Connector or Mobile Connector setup at home and use a Lectron Tesla (NACS) to J1772 charging adapter for your other EV. It allows for convenient storage of the adapter next to…
This is version 2: Original model here . I really liked scrat82's “ j1772 plug holder with cord management for EV cars and chevy Volt ”. Specifically I liked the way the handle was sideways, rather than perpendicular to the wall. I was…
For some reason, not all EV chargers include a dust cover. Why buy one when I can spend some time in CAD and make something that other people can benefit from, too? I printed this with some relatively ancient 92A “soft PLA” but I'd…
I designed this model by myself entirely! It's my first time uploading something to printables. For my installation, I cut out a piece of 3/4in plywood and screwed that into the stud first, before screwing the printed part into the…
⚠ Safety Concerns ⚠ There was some concern by folks that this could lead to people disconnecting the NACS cable while charging was still engaged. I’ve done some research and discovered that there is, in fact, a mechanical locking…
OpenSourceEV Parts designs, produces, and shares 3D‑printed parts for Rivian EVs. Staying true to our open‑source mission, every product we create comes with free STL files so anyone can remix, customize, or print at home for little to no…
OpenSourceEV Parts designs, produces, and retails 3D printed parts for Rivian EVs. We're Open Source because we post the STL files for every single product that we design so everyone can remix or 3D print them at home for little to no…
I redesigned a CCS to NACS Adapter holder with a cap. Made for storing a CCS adapter for cars that use NACS (Tesla, 2025 Hyundai IONIQ 5, etc). I have included a version with a TPU gasket to prevent rattling and a version without. Even…
I really liked scrat82's “ j1772 plug holder with cord management for EV cars and chevy Volt ”. Specifically I liked the way the handle was sideways, rather than perpendicular to the wall. I was unable to find a version for the Tesla…
OpenSourceEV Parts designs, produces, and shares 3D‑printed parts for Rivian EVs. Staying true to our open‑source mission, every product we create comes with free STL files so anyone can remix, customize, or print at home for little to no…
Here are some protective covers for your CCS/J1772 to NACS charging adapters. I only have access to the ones from Rivian, so that's what I've included so far. If I end up with others I'll add more or at least verify if these fit. They're…
Insert this adapter into the holster on your Tesla Wall Connector so you can leave the J1772 adapter on the end at all times. Useful if you have a Tesla charger but your primary EV is not a Tesla.
A simple wall mounted holder for J1772 to NACS adapter, as sold by Tesla. It will probably also work for similar adapters from other brands. Uses 2 screws to attach, a good double sided tape might also work.
OpenSourceEV Parts designs, produces, and shares 3D‑printed parts for Rivian EVs. Staying true to our open‑source mission, every product we create comes with free STL files so anyone can remix, customize, or print at home for little to no…
This model was designed for CCS + J1772 adapters. Perfect fit for Lectron Vortex and the Lectron 48A Level 2 adapter (Tesla (NACS) to J1772 EV Adapter | 240V | 48 Amp). Designed for PETG for better durability in hot environments.
Just a simple cutout of the NACS/Tesla connector for use on signs or whatever you please. I modified the SVG from Wikipedia to be printer friendly with this STL. Personally using this to make signs to identify electric chargers at my…
Store your Tesla AC and DCFC adapters neatly. Hang on any vertical surface. I plan to put mine in the frunk with 3M VHB tape.
Rarely used Nacs adaptors were taking up valuable real estate in my driver door compartment so with this mash up they are now neatly stored in my center console as part of the supports for my printed shelf system.
Removed the J1772 part of the holder as I only needed the CCS part of the holder. Dorbiman's design is a very nice fit. I'm using this to store the adapter in a Chevrolet Bolt.
Print parameters that I used: Filament: PTEG-CF Fill: 100% for strength Supports: On (tree) for the hanger clips
I needed a space-efficient solution for storing my home EV charging setup which supports both J1772 (Kia Niro EV) & NACS (Ioniq 5). While @StorageB_83058's charging cable and plug holder fit my space-efficient requirements exactly, I…
Pick the file according to the thickness of the felt used. Felt can be cut with a machine or by hand, doesn't need to be super precise. I used some velcro to stick it in place. Some wiggle room, not a tight fit. Completely silent now, and…
A simple remix of ex-nerd's NACS cover that has a hole for a string to be used for retention. Just added a 3mm hole for a string... that's all.
OpenSourceEV Parts designs, produces, and shares 3D-printed parts for Rivian and GM EVs. Staying true to our open-source mission, every product we create comes with free STL files so anyone can remix, customize, or print at home for…
Ikea Skadis Holder for KOKUYO Stapleless Stapler Harinacs Compact or other small stapleless stapler.
Remix credit This is a remix of "OpenSourceEV DCFC + J1772 to NACS Adapter Holder for Rivian R2" (OCL v1.1) by Rob @OpenSourceEV: https://www.printables.com/model/1876474-opensourceev-dcfc-j1772-to-nacs-adapter-holder-for All credit for…
I made a NACS holder for the Tesla Mobile Connector Charging Cable with a cord hanger. There are others available but none that fit what I needed. I recommend printing in PETG.
A simple wall mounted holder for J1772 to NACS adapter, as sold by Tesla. It will probably also work for similar adapters from other brands. Uses 2 screws to attach, a good double sided tape might also work.
This model was designed for CCS + J1772 adapters. Perfect fit for Lectron Vortex and the Lectron 48A Level 2 adapter (Tesla (NACS) to J1772 EV Adapter | 240V | 48 Amp). Designed for PETG for better durability in hot environments.
Removed the J1772 part of the holder as I only needed the CCS part of the holder. Dorbiman's design is a very nice fit. I'm using this to store the adapter in a Chevrolet Bolt.