tes•LAX Brand NACS Premium Quality Charging Cable Organizer Hook Holder, Durable & Compact, Ideal for Home and Office Use, Sideways Space Saving Design, Compatible with Various Cable Types - Perfect for Tidy & Clutter-Free Environments
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A re-design of scrat82's "j1772 plug holder with cord management" but for a NACS/Tesla charge handle.
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 53
- Makes
- 0
- Views
- 543
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Automotive
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I really liked scrat82's “j1772 plug holder with cord management for EV cars and chevy Volt”. Specifically I liked the way the handle was sideways, rather than perpendicular to the wall. I was unable to find a version for the Tesla (NACS) connector other than a few Etsy sellers of their own unpublished variant. So I decided to make a variant of my own.
It features a spring clip that hooks on to the handle nicely when inserted. A reasonable tug will allow you to remove the handle from the socket.
Make sure you are 100% happy with the fit before using. Always makes sure your last loop over the hook doesn't have too much slack: if your handle pops out of the holder accidentally, you don't want it to hit the ground. Your mileage may vary. Use at your own risk!
Printing this is a little tricky. Here are some tips:
- There is a single in-built support that allows the spring tab to print as a bridge. You can either cut this with a hobby knife or break it by working the spring with your hand.
- Organic supports have a hard time getting into the main cove area. I had to modify my PrusaSlicer settings to allow 55-degree supports. The supports did a good job but I still had to clean up a few errant drooped loops.
- The area above the spring tab could use a little extra support. I had a few loops droop in that area.
- In the end, a little extra time with your support setting and painted on enforcers will probably help you get a better part.
Mild branding for my app on the reverse side. If you like this, check out my app tes•LAX and consider purchasing if you find it useful!