Search results: netatmo

Sort order

Counting matching models…

P
PrintablesMarcoGioc

Netatmo edge 503

This is an edge for italian 503 wall box to fix a Netatmo thermostat. Questo è un bordo per scatola da parete 503 italiana per fissare a parete un termostato Netatmo. Print instructions Nodzle: 0.6 mm Resolution: 0.3mm Infill: 100%…

Print approx. €0.29–€0.36 excl. taxPreliminary estimate for one variant

Downloads
200
Likes
9
Rating
5
P
PrintablesDr. Terra

Netatmo Rain Gauge Holder

A simple holder to mount my Netatmo Rain Gauge to a flat wooden pole. Printed with PETG for UV resistance and 100% infill for stability (might be not necessary). Paint on Support below the plate (see gcode file)

Print approx. €2.30–€2.81 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
193
Likes
13
Rating
0
P
PrintablesLukáš Foukal

Mount and Radiation Shield for Netatmo and Generic 433MHz Weather Station

This is print is designed to mount a Netatmo Outdoor module and a generic 433MHz cheap temperature sensor on a pole. It also includes two “radiation shields” which protect the sensors from direct sunlight, but allow air to flow through…

Print approx. €3.01–€3.68 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
172
Likes
30
Rating
5
P
Printablesoliverschebesta

simple wallmount for a Netatmo Indoor Module

ideally printed in white, so it fits nicely to the design and colors of the module itself

Print approx. €1.14–€1.40 excl. taxPreliminary estimate for one variant

Downloads
29
Likes
4
Rating
0
P
PrintablesHarry

M30x1.5 adapter for Netatmo radiator thermostat

Thank you for supporting me! This is another free 3D model made available for you. I love sharing my models, but designing, testing, polishing, uploading and maintaining them is a lot of work. In case you enjoy this model, please leave a…

Downloads
449
Likes
17
Rating
5
P
Printablesmoxx1985

Netatmo Halter Innenmodul

Halterung für das Innenmodul der Netatmo Wetterstation. Drucken: PLA Keine Stützen 15% Infill Montage: Halterung an Wand montieren Stecker durch seitliche Öffnung führen Stecker soweit nach hinten ziehen, dass Netatmo von oben in die…

Downloads
392
Likes
35
Rating
4.4
P
PrintablesShawinkle

Netatmo Outdoor Sensor Module Enclosure

Simple enclosure for the Netatmo outdoor sensor module. Printed with PETG onto an Ender 3. No supports needed.

Downloads
355
Likes
33
Rating
5
P
PrintablesJsR

Netatmo outdoormodule weathercover

I made cover for my netatmo outdoor module, this can be printed without supports. Just insert outdoormodule between two halfs, screw in stand and then top.

Downloads
333
Likes
34
Rating
5
P
Printablesdym801

Cache Netatmo module extérieur

Cache Netatmo module extérieur A imprimer en PLA de couleur claire en 0,2mm sans support : 1x base 3x ElementIntermédiaire 1x chapeau A assembler avec un fluide gras (huile alimentaire)

Downloads
309
Likes
24
Rating
4.67
P
Printablesk-eye

Netatmo Rain Gauge / Regenmesser Halterung

A bracket to attach the Netatmo rain gauge to a pole via cable tie. Printed on a Prusa MINI. Eine Halterung, um den Netatmo Regenmesser per Kabelbinder an einer Stange zu befestigen. Print Settings Printer Brand: Prusa Printer: I3 MK3S…

Downloads
252
Likes
11
Rating
5
P
Printableschixxi

Netatmo Thermostat - Danfoss RA-N Adapter

Description The original Danfoss RA-N Adapter which come in the box which each Smart Netatmo Radiator Thermostat is complete crap. It does not fit properly, does not keep the thermostat in place reliably and the thread keeps failing. This…

Downloads
245
Likes
22
Rating
0
P
Printablesoxygene

Netatmo Sunshield

The Netatmo outdoor module is supposed to be placed in a shady place with sufficient air flow for accurate readings. Ideally, it is placed high above the ground and not too close to buildings. However, it's not always easy to find a spot…

Downloads
224
Likes
36
Rating
5
P
PrintablesAlexander

Netatmo Wind and Rain Mount

Remixed the mount of “dalton” to fit my wall. You need Sechskantschraube 1/4-20 UNC x ½. Printed in ASA

Downloads
200
Likes
20
Rating
5
P
PrintablesKevink

Netatmo Sunshield Remix

The original model was very nice, but I decided to beef up all of the parts for a little extra strength which may or may not have been necessary. The following changes were made: 1) Beefed up the top and bottom rings, the pillars, and the…

Downloads
168
Likes
30
Rating
5
P
PrintablesMac

Netatmo Wind Gauge Pole Mount

Holder for Netatmo Wind Gauge for pole mount (diameter of pole is 4 cm). Designed with holes for plastic ties. At bottom is a hole for securing gauge with screw - same size as for camera tripods. I dismounted screw form some cheap small…

Downloads
155
Likes
13
Rating
0
P
PrintablesBlackbird

weather hut / shield Netatmo outside module

Printable without supports, prefarable in white material (PETG) Should be sufficient for reliable shielding of sun. Lots of vents that no heated air could accumulate. Glue together with superglue or with soemthing like UHU-Foam. (at least…

Downloads
150
Likes
13
Rating
5
P
Printablesoxygene

Netatmo Indoor Module Holder

Use two screws to place your netatmo indoor module anywhere

Downloads
150
Likes
18
Rating
4.67
P
PrintablesJeeves

Netatmo Rain Gauge Bird Guard

This guard prevents birds from resting on the gauge, thus, keeping it clean. I've printed this with 100% infill in order to give the spires strength, however, they are still rather delicate.

Downloads
138
Likes
19
Rating
4.67
P
Printableslorenzodroid

NETATMO Valve Caleffi Adapter

I had to revisit this adapter https://www.thingiverse.com/thing:4022121 for Caleffi valves. With my valves it is difficult to grip the thermostatic head and a couple of times the valve has fallen from the radiator. To mount it on the…

Downloads
137
Likes
10
Rating
5
P
Printablesdalton

Netatmo Rain/Wind Gauge Mount

Mount for Netatmo rain or wind gauge. You will need 1/4"UNC-20x1/2" (12mm) HEX stainless steel bolt (thread as in camera tripod). I used ASA because it is UV and weather resistant. Fusion 360 file included. Gcode is for Prusa i3 MK3S.…

Downloads
128
Likes
13
Rating
0
P
PrintablesLocksen

Netatmo Universal Mount

This mount wil fit for Netatmo weather station, netatmo welcome , smart in door module Print Settings Printer: Ender 3 v2 Rafts: No Supports: No Resolution: 200 Infill: 20 Filament: Amazon Basic PLA Category: Camera

Downloads
117
Likes
15
Rating
5
P
PrintablesMr. T

Netatmo Presence Shield

Is your Netatmo Presence camera not a fan of sunbathing? Neither was mine—until one overheated and took an unscheduled break! That’s why I designed this Weather Cover to keep it cool, shady, and in tip-top shape. Perfect for preventing…

Downloads
117
Likes
11
Rating
0
P
PrintablesGrusel Karren

Netatmo Rain Gauge Plug

The plug on top of my Netatmo rain gauge broke and I designed a new one. I printed mine Prusament PC Blend but you can print it also in PETG. I do not recommend using PLA.

Downloads
115
Likes
7
Rating
0
P
PrintablesDaniel Bass

Netatmo Sunshield arm for brick wall

Created my own attachment arm to attach the Netatmo Sunshield to my brick wall.

Downloads
98
Likes
12
Rating
5
P
PrintablesMicke

Netatmo Smart Home Weather Station Indoor Unit Mount

I printed my mount in solid PLA for some rigidity with a layer height of 0.2 mm. Use supports. After attaching the connector, simply push the indoor unit into the mount as the second picture shows.

Downloads
96
Likes
7
Rating
0
P
Printablescmoi

support module principal netatmo

Afin de pourvoir positionner le module principal de chez netatmo n'importe ou sur un mur; voici un support a fixer . 2 vis a placo suffisent largement vu le faible poids. passage du câble d alimentation par l’arrière. Il est possibilité…

Downloads
92
Likes
8
Rating
5
P
Printablesbooki

Netatmo Wind/Rain Gauge Mount for Tube/Pipe

Simple Netatmo Rain/Wind Gauge mount which can be mounted on a pipe (40mm) Can be printed in ASA or PETG to ensure outdoor usage. Needs some support while printing. On picture it was printed with DASFILAMENT PETG and 0.6mm Nozzle on a…

Downloads
91
Likes
10
Rating
0
P
PrintablesExeu

Netatmo screwless wallmount

Just a simple two part wall mount for a Netatmo module. Basically you need to print the holder and the mount and afterwards glue those things together. Apply some strong and water-resistant double-sided tape on the back of the mount and…

Downloads
88
Likes
6
Rating
0
P
PrintablesPatrik

Netatmo Rain Gauge Holder

A holder to mount the Netatmo Rain Gauge to a flat surface, such as a wooden handrail. Use PETG or ASA for UV resistance. No supports needed. Print with 4 walls for better strength.

Downloads
85
Likes
6
Rating
0
P
Printablesjmichel

NETATMO wall support / support mural

Designed to be mounted on a wall. 45.7mm module hole, 3mm tapered fixing screw. -- Prévu pour être installé sur un mur. Diamètre du logement du module 45.7mm, fixation par vis à tête fraisé de 3mm de diamètre.

Downloads
83
Likes
11
Rating
0
P
PrintablesTorpedo

Netatmo Regensensor Rain Gauge Raingauge Pin

Pin für den Regensensor, auch in einer Supportfreien Variante

Downloads
83
Likes
6
Rating
5
P
PrintablesE-Raw

Netatmo Outdoor Module Support and Sun Shield

The first goal of this multipart model is to provide a support for outdoor Netatmo module, to be stick to window or any flat surface. I personally use 3M VHB transparent double sided tape for that purpose. There is two sun shield /weather…

Downloads
81
Likes
5
Rating
0
P
PrintablesRaQic

Netatmo outdoor module - hanging holder

Original model was made to be screwed into the wall. This modified one can be hooked onto just 1 screw on the top.

Downloads
81
Likes
2
Rating
0
P
PrintablesHKOCH

Netatmo Outdoor Sensor Sun Radiation Shield

The model consists of several 3D-printed parts to print and assemble using the included instructions. You have to add screws and nuts by yourself. See the types in the PDF file (instructions)

Downloads
80
Likes
8
Rating
0
P
PrintablesForfelet

M28x1.5 adapter for Netatmo radiator thermostat

Adaptor supplied (M28x1.5) were too short for my radiator. Printed in PETG 0.2mm

Downloads
75
Likes
4
Rating
5
P
PrintablesJeeves

Netatmo Anemometer Bird Guard

This guard prevents birds from resting on the gauge, thus, keeping it clean. I've printed this with 100% infill in order to give the spires strength, however, they are still rather delicate.

Downloads
75
Likes
8
Rating
0
P
Printablespcuser333

Netatmo Rain Gauge mount

This is a simple holder for the Netatmo Rain Gauge. There is also a hole for a small screw to fix the mount in position. The distance of the clamp is 12.5 mm.

Downloads
75
Likes
16
Rating
0
P
PrintablesMrak3D

NETATMO thermostat wall mount

I wanted to replace my old thermostat and mount Netatmo on the same place, using same screws. So this mount has two screw holes (84 mm distance), it holds Netatmo thermostat and allows to change temperature by pressing top/bottom. Lover…

Downloads
75
Likes
7
Rating
0
P
PrintablesMartin_au

Netatmo Rain Gauge mount for poles

Remixed from https://www.thingiverse.com/thing:2822754/files and https://www.thingiverse.com/thing:1635934/files Thanks maciii and denisvic

Downloads
70
Likes
7
Rating
5
P
PrintablesScorch1262

Netatmo Kamera Halterung MK1

Passend für: Netatmo Türkammera Print Settings Printer Brand: Ultimaker Printer: Ultimaker 2 Rafts: No Supports: No Category: Camera

Downloads
68
Likes
2
Rating
5
P
PrintablesHenki71

Netatmo corner mounting / Eckwinkel

This is my Netatmo corner mounting. Netatmo Eckwinkel Print Settings Printer: Artillery Sidewinder X1 Rafts: No Supports: No Resolution: 0,2mm Infill: 20 Filament: Eryone PLA Marble Category: Household

Downloads
67
Likes
5
Rating
5
P
PrintablesMac

Netatmo Rain Gauge Holder

Simple Netatmo “anti wind” holder. Fits tight - holds fine. Possible to print without supports. I printed model with 0.8 nozzle (to test speed with this diameter) from Prusa PETG. But should work well with any nozzle diameter and all…

Downloads
63
Likes
4
Rating
5
P
PrintablesKRobertsen

Netatmo Indoor unit wall mount - remixed

I had a hard time getting the USB-cord into the Netatmo so I remixed the version by moxx1985

Downloads
62
Likes
5
Rating
5
P
PrintablesGringorion

Netatmo wind gauge - Anemometre

Hello! This is a basic model to hold a Netatmo wind gauge, very easy to print and to install. The gauge bottom won't be in permanent contact with water to preserve the device. Don't hesitate to contact me if needed, Cheeers

Downloads
61
Likes
3
Rating
0
P
Printablesrin_ofumi

Netatmo Welcome Wall mount Holder

This is the Wall mount Holder for Netatmo Welcome. Use the KABEBIJIN bracket. See this site for more information. Sorry, This site is Japanese only. ( https://kitto-yakudatsu.com/archives/924 ) Print instructions Category: Camera Print…

Downloads
59
Likes
14
Rating
0
P
Printablesklarinettli

Netatmo Wind Gauge Guardrail Holder

This holder allows to fasten the Netatmo Wind Gauge securely to a guardrail using zip ties. It's designed for a guardrail with bars measuring 41x9 mm. Print Settings Printer Brand: Prusa Printer: Prusa Mk2 Rafts: No Supports: Yes…

Downloads
59
Likes
6
Rating
0
P
PrintablesArkimede

NETATMO INK 010 for Vimar 503 case

Dato la mancanza di un modulo che possa poter montare il crono termostato su di una scatola vimar ho realizzato sia la piastra di base che la maschera o cover per il suddetto modulo. per l'ancoraggio della cover bastano 2 magneti 8x3mm…

Downloads
59
Likes
6
Rating
0
P
PrintablesRedneck

Netatmo Doorbell Wallmount

I created this 10 degree wallmount for the Netatmo Doorbell, because I needed something between the straight wallmount and the 20 degree wallmount wich was in the package. The screw holes are a bit tight. I made it, because the the screws…

Downloads
58
Likes
7
Rating
5
P
PrintablesDD3D

Netatmo Presence power cable base

I wanted to install my Netatmo Presence camera using an existing power cable from a previous flood light but the base of the camera only supports putting the camera directly on top of the power cable or junction box for obvious security…

Downloads
55
Likes
7
Rating
0
P
Printablessheprints

Netatmo smart video doorbell mount + cover for wires

Netatmo Smart Video Doorbell (mount + cover for wires) The doorbell requires the wires coming straight from the wall into the case. If the wires are on the surface on the wall, e. g. if the doorbell is displaced, then this mount can be…

Downloads
55
Likes
3
Rating
0
P
Printablesklarinettli

Netatmo Rain Gauge Guardrail Holder

This holder allows to fasten the Netatmo Rain Gauge securely to a guardrail using zip ties. It's designed for a guardrail with bars measuring 41x9 mm. Print Settings Printer Brand: Prusa Printer: Prusa Mk2 Rafts: No Supports: Yes…

Downloads
54
Likes
6
Rating
0
P
PrintablesMG_Maker

Netatmo Anemometer Bracket

Netatmo Anemometer Bracket Here's a bracket to mount the Netatmo Anemometer on a pole. The bracket is split in two, left and right and there is an STL file here for each one. Two pole sizes are provided 20m and 25mm. The fixings needed…

Downloads
52
Likes
6
Rating
0
P
Printablesravestop

Netatmo Indoor-Module-Mount

A simple mount for the indoor modules of the netatmo weather station

Downloads
52
Likes
4
Rating
0
P
PrintablesJohannes E

Netatmo Fence Mount

I used this mount to mount my Netatmo Wind Meter (Netatmo Windmesser NWA01-WW, 16 cm) and my Netatmo Rain Gauge (Netatmo Regenmesser NRG01-WW) to my fence. Might be not the best position for the wind meter, but thats okay for now. Printed…

Downloads
50
Likes
11
Rating
0
P
PrintablesMicke

Netatmo Weather Station Indoor Unit Mount

This mount is suitable for mounting near a door, a window or similar, as the unit will be close to the wall. Connect the connector by using the hole on the back before mounting the mount to the wall. Use supports.

Downloads
48
Likes
4
Rating
0
P
Printablesspielundzeug

Door Chime Cover with space for the Netatmo Video Doorbell box

I lost the cover for our doobell while rennovating the house. So I made a better one. I modeled it in a Twitch stream. I you want to follow me on Twitch for more 3D modeling and printing content (in German) feel free to follow along.…

Downloads
47
Likes
8
Rating
0
P
PrintablesCargy

Netatmo Relay Faceplate For UK Wall Box

When I upgraded to my Netatmo heating thermostat a couple of years ago, I was stuck with a problem that might affect others: My original hard wired thermostat used a standard UK wall box (pattress) for its mounting. The Netatmo relay is…

Downloads
46
Likes
3
Rating
5
P
Printablesderzoelli

Netatmo wind gauge mount for flagpole top cap

When I got my Netatmo wind gauge I immediately wanted to mount it. So I just drilled a hole in the standard top cap of my flagpole, put a screw in and put the wind gauge on top of it. This ‘solution’ worked for a while, but it looked…

Downloads
46
Likes
15
Rating
5
P
PrintablesPetri

Netatmo adapter for RAVL 26 / 32 mm thread

Thread adapter Netatmo smart radiator thermostat (32 mm) / RAVL radiator (26 mm) with threads. 2 different heights, 9 and 15 mm with and without a side slot. Netatmo_26_32_inside_thread_v4_full_circle.stl is a custom fit for my radiators…

Downloads
45
Likes
2
Rating
0
P
Printablesarenera

Rain cover for Netatmo Anemometer

Printed in PLA. No support needed. I fixed it with Blu Tack. Made for Netatmo Anemometer (GTIN 03700730500227).

Downloads
45
Likes
9
Rating
0
P
PrintablesPierre Gs

protection sonnette Netatmo

Protection contre les intempéries pour sonnette intelligente Netatmo. Créee pour se placer sur le support original Netatmo incliné à 25°, aucune modification nécessaire, rien d'irréversible. Maintien par collage au silicone transparent…

Downloads
45
Likes
3
Rating
0
P
Printablesviper-sg2

Netatmo Rain/Wind Gauge Mount

Mount for Netatmo rain or wind gauge. It can be attached to a square railing with cable ties.

Downloads
43
Likes
3
Rating
0
P
Printablespatrickzell

Mount for Netatmo Rain Gauge

Easy-to-print holder for the Netatmo rain gauge. Is only plugged together - possibly glued - and can then be plugged onto a 30mm tube. A standard camera screw with 1/4" thread (length approx. 11 - 15mm) is required to attach the rain…

Downloads
43
Likes
6
Rating
0
P
PrintablesSakura Glitch

Netatmo Presence roof/rain cover upside down mount

My colleague needed to mount his Netatmo Presence Camera upside down due to clearance to on overhead light. Unfortunately rain & cold weather led to an broken SD Slot, as water gathered in the exposed Slot and freezed in winter. As a…

Downloads
42
Likes
2
Rating
0
P
Printablesjitesar

Netatmo anemometer rain cover - 82.3 mm diameter

I created new model from the scratch, but I was inspired by the original version. Protrusion tabs are more strong and it has better fit to my anenometer. Printed with PETG, but PLA will work as well. 0.2mm, without supports.

Downloads
40
Likes
4
Rating
5
P
PrintablesAWSW

Netatmo Welcome design and privacy cover

Cover for the Netatmo Welcome camera for those who also do not like the original design of the camera. When you turn the cover you can also block the camera lense with it for more privacy when the camera is not supposed to be used. The…

Downloads
40
Likes
5
Rating
0
P
PrintablesMr. T

Netatmo Anemometer 45mm Slope Mount

Internal diameter of slope should be 45mm or so. I've made a hole for the hot melt inset nut (M4) just to keep it in place. I recommend to use the PETG filament, 4 perimeters and 40% infill.

Downloads
38
Likes
2
Rating
5

Netatmo - Wall Support - Supporto Muro

ENG Just a redesign of a mount wall for Netatmo devices (Welcome, Weather station, AirCare, etc) If you like it and you want to support my work, please donate here: https://paypal.me/StefanoUnga ITA Ho ridisegnato un supporto a muro per i…

Downloads
35
Likes
5
Rating
0
P
Printablestunisiano187

Netatmo Webcam Welcome and Health coach light support

Netatmo Webcam Welcome and Health coach light support

Downloads
34
Likes
1
Rating
0
P
PrintablesAlex

Netatmo Presence Base - PowerCable Route

I liked the original by DD3D, but you can route the cable only in one direction. In this model you can route the power cable in all 4 directions. You must only remove the cover on that site you want.

Downloads
33
Likes
3
Rating
5
P
PrintablesAWSW

Netatmo Welcome privacy cover

Cover for the Netatmo Welcome camera. When you turn the cover you can also block the camera lense with it for more security in privacy when the camera is not supposed to be used. Simple and quick to print and fits well on top of the…

Downloads
32
Likes
6
Rating
5
P
Printablesf4r0kh

Netatmo Welcome cable holder

Netatmo Welcome camera has a pretty loose power supply microUSB connector and my cats used to unplug it every time they walked behind the camera. So I designed a simple holder to fix this issue. Make sure your microUSB cable is the same…

Downloads
32
Likes
7
Rating
0
P
PrintablesChris

Netatmo Windmesser - wind gauge - Anemometer

Nachdem der Netatmo Windmesser nur mit einer ¼ Zoll Schraube befestigt werden kann habe ich nach einer Möglichkeit gesucht um diesen auch auf Oberflächen befestigen zu können. Ich habe mir hierzu diese ¼ Zoll Schrauben von Amazon bestellt…

Downloads
32
Likes
2
Rating
0
P
PrintablesHarryMax

Netatmo-Regenmodul-Vogelschutz

Vogelschutz mit Spikes auch in der Mitte

Downloads
31
Likes
4
Rating
0
P
Printablesdym801

Support Netatmo pour pluviomètre ou anémomètre

Support Netatmo pour pluviomètre ou anémomètre Pour toit plat A imprimer en PLA en 0,2mm, sans couche supérieure et inférieure pour l'évacuation de l'eau de pluie, sans support Mount for Netatmo wind or gauge. Print it in PLA en 0,2mm…

Downloads
29
Likes
0
Rating
0
P
PrintablesEmanuele

NetAtmo external sensor holder

a simple holder for the external sensor of NetAtmo

Downloads
29
Likes
4
Rating
0
P
Printablesmasollid

Netatmo wind bracket for 75 mm pole

Can be printed without supports

Downloads
29
Likes
2
Rating
0
P
Printablestor_cz

Netatmo Valve Alternate Front Cover

This front cover is suitable if you want to power your Netatmo valves with wires instead of batteries. You can find a battery replacement module in my other printables.

Downloads
27
Likes
3
Rating
0
P
PrintablesMartin_au

Netatmo Smart Outdoor Camera Clamp

A little wedge that fits behind the Netatmo camera and prevents it from dropping over time. Can be a bit hard to insert. Slide it into place at an angle. Only works if your camera is at the same angle as mine I'm afraid.

Downloads
26
Likes
5
Rating
0
P
PrintablesJorisFRST

Skadis netatmo holder/mount (offset to right of board)

I printed in white PLA, with supports.

Downloads
26
Likes
3
Rating
0
P
PrintablesKnollsHouse

Netatmo Security Camera Privacy Cover

A privacy cover for the Netatmo Security Camera. Needed one for a reason and didn’t want to have to turn it off. Print at 101% scale. I have yet to change the dimensions.

Downloads
25
Likes
4
Rating
0
P
PrintablesAchim

Netatmo Smart Smoke Detector Spool Mount for Creality Ender 3 S1

Netatmo Smart Smoke Alarm spool holder for Creality Ender 3 S1. Category: 3D Printing

Downloads
25
Likes
3
Rating
0
P
PrintablesJoshua

Back plate for Netatmo video door bell

This design is 18x14cm and has the two screw holes that fit the Netatmo mounting plate. Printed in ASA.

Downloads
25
Likes
3
Rating
5
P
PrintablesPreppen

Netatmo Doorbell Wallmount 10° angle

An angled backplate for the Netatmo doorbell to, in my case, get the perfect camera angle to cover the whole entrance. this one is angled 10°, the original is 25°.

Downloads
25
Likes
0
Rating
0
P
PrintablesGeoffB

Netatmo Rain Gauge Mount

Here's a mount for a Netatmo rain gauge which enables it to be mounted onto a flat outdoor surface. If the surface is not porous, print four of the shims to elevate the mount sufficiently to allow the waste water to escape. You will need…

Downloads
23
Likes
2
Rating
0
P
PrintablesJulien Issert

Netatmo Thermostat Mount

Support pour Thermostat Netatmo Facilitez l'installation de votre thermostat Netatmo grâce à ce support parfaitement adapté. Simple à imprimer et à fixer, il vous permet de poser votre thermostat sur un mur ou une surface plane avec…

Downloads
23
Likes
0
Rating
0
P
Printableshonza.cz

Netatmo unit holder2

Netatmo unit holder 2 with open or hidden holes for attachment. Printed with PETG, 15% infill, no supports.

Downloads
22
Likes
1
Rating
0
P
PrintablesPedro_1984

Netatmo wall mounting plate

Original Netatmo wall mounting plate comes in white-grey colour and it's quite big. Because I wanted something minimalist, I “designed” this in tinkercad. :-) Print with 0,4mm nozzle, height 0,2mm

Downloads
21
Likes
2
Rating
0
P
PrintablesRaQic

Netatmo outdoor module - magnetic bottom

Lets you add 5x magnet for more placement options. https://www.prusa3d.com/product/set-of-magnets-8pcs/

Downloads
21
Likes
0
Rating
0
P
Printablestor_cz

Netatmo Valve Wired Battery Module

You can use this alternative module for Netatmo valve if you want to power your Netatmo valves by wire instead of batteries. Valve front cover model is in my other printables.

Downloads
21
Likes
7
Rating
0
P
Printablesdm1x

Netatmo Doorbell Backplate

Netatmo Doorbell Backplate

Downloads
21
Likes
0
Rating
0
P
PrintablesNikox

Support mural Netatmo

Support mural pour caméra ronde Netatmo avec un design en forme d’alvéole, permettant une impression rapide et économique. Imprimable en PLA pour l’intérieur, mais privilégiez l’ABS ou le PETG pour l’extérieur. Aucun support requis pour…

Downloads
20
Likes
2
Rating
0
P
Printablesleuzi

Netatmo Welcome Housing

For better WiFi connectivity

Downloads
20
Likes
3
Rating
0
P
PrintablesCargy

Low Profile Netatmo Relay Faceplate for UK Wall Boxes

After creating my original faceplate design, https://www.thingiverse.com/thing:4320328 I swiftly realised that I could bring it even nearer to the wall surface with a little remodelling. But as I was completely out of white filament, I…

Downloads
20
Likes
2
Rating
0
P
Printablesgimpelginster

Netatmo Anemometer Corner Mount

This is a corner mount for the Netatmo anemometer. You can use this if you cant easily access your rooftop or have no way of mounting it there. While mounting it directly next to a wall isn't optimal either this should work fairly well.…

Downloads
19
Likes
2
Rating
0
P
PrintablesNikasio14

Netatmo regulator calibration cap

This small cap was the last of it's kind in my collection after I switched all of my regulators on my radiators in the house. The plumber then switched the valve and all of a sudden the netatmo regulator could not calibrate anymore and…

Downloads
19
Likes
1
Rating
0
P
PrintablesOzoner

Netatmo Outdoor Camera 70 degree angle adapter

This adapter gives you another 25 degrees (ish) of side to side aiming ability when installing your Netatmo Outdoor Camera. The factory-supplied bracket can only move 45 degrees to each side of center, which doesn't work for some…

Downloads
19
Likes
0
Rating
0
P
PrintablesgrubFX

Netatmo Outdoor Module Holder

A mount for the Netatmo outdoor module that holds the sensor up by hooking into its recessed mounting hole.

Downloads
18
Likes
0
Rating
0
P
PrintablesBetaqwe

Netatmo Weather station bracket / Wetterstation Halterung

Netatmo Wetterstation Halterung für Dachrinnen. Benötigt wird: 1x Druckdatei 4x Kabelbinder My printing settings: I recommend printing in PETG or PLA Nozzle: 0,4mm layer height: 0.2 perimeters: 3 infil: 15% no support

Downloads
18
Likes
1
Rating
0
P
PrintablesTerje

Wall mount for Netatmo sensors

Simple wall mount for Netatmo sensors or anything else with a round base with a diameter of 45mm. Prints in 3 parts, uses french cleat system to hide wall mounting holes. Use super glue to assemble upper and lower part.

Downloads
17
Likes
1
Rating
0