425 models
Audio cassette box. (Obal na běžnou audiokazetu.) Print instructions =EN======== Audio cassette box. Like the original box. Used thicker walls for better coherence. If you want an original size, print 99% size. I think, nozzle 0.4 is…
I couldn't find a Bombardier Global card kit, so i made one. I have a Gulfstream G650 one in the works as well. Coming soon. This STL can be scaled smaller, you just may loose some of the thin lines around the cockpit windows. try using a…
This is bottom part for RFID chip for doors. Inside diameter 26mm. I printed with blue pla with 0,2mm and 210°C I also added obj file from fusion 360. I made this model for my cousin as part of my learning in fusion.
A way to mount your Cobalt turnout motors, can be fixed with screws just glue.
Dekorativní obal na kosmetiku A jiné
Edit: 23. 2. 2026: I published an updated version here . It's better, so you should definitely download Gertrude instead. Edit: 23. 7. 2026: The updated version is now capable of carrying a dino rider. Try it out! This is my second flexi…
This is a mold for snowballs to make it look like a nuke. It is a quick and easy print-in-place print at 1 hour and 45 minutes on Bambu labs p1s with no supports. print settings/info filament: 45ish grams when printed with 3 walls and 15%…
The Lowe's Mini Toolbox is perfect for adding a 3x5 Gridfinity baseplate in each drawer to use x3 and x6 height bins. I've modified one of my Clickfinity baseplates to incorporate spacers on each side; none are needed for the front and…
I designed a combination wrench holder after struggling to find one I liked. This is based on a generic wrench holder that gradually increased in wrench size and depth. I used a 3x5 Gridfinity base for the 13 wrench holder and a 3x4 for…
I liked https://www.printables.com/model/534188-kobalt-mini-toolbox-inserts/ but the base for it used Clickfinity and I thought Gridfinity itself was fine. Threw together this base-plate from…
She's as good as three unicorns! She might even poop three rainbows. Print her and find out! Gertrude is the 2025 update of my second Flexidino, Theobald , from 2023. I've completely rebuilt the model, especially the outdated joints. I've…
Dimensionally and weight-accurate model/print file of the 2025-2026 Vex Robotics game element, for the game Push Back.
Eine Erhöhung/Adapter für die Wasserfilter von Aqua Global. Die Erhöhung wird einfach zwischen die beiden Teile der Abtropfschale gesteckt. Insgesamt ist sie dann 7,8cm höher. Passt zu Mini Touch und Flexible Touch. Mit Support gedruckt.…
Latch broke, I made a new one. The end If you would like to buy one you can do so here https://www.etsy.com/listing/1344813271/kobalt-toolbox-latch-thing Print instructions Category: Tool Holders & Boxes
Jednoduchý gumový obal na mobilní telefon Xiaomi 14T/Pro s prostorem pro plíšek magnetického držáku. Tisknuto z TPU eSun 95A tryska 0,4 Vrstva 0,12 stromové podpory
CSGO / CS2 LE-GE Rank Keychains Ranks included: Legendary Eagle, Legendary Eagle Master, Supreme Master First Class, The Global Elite. Material Used: Bambu Filaments Background: Black PLA Stripes/Rank: Silk Gold PLA Supreme/Global Elite…
Tool mount and dust shoe for the Kobalt palm router and a 70mm OD or less vac hose. PETG or better if you are concerned with heat. PLA works for most routers, some new ones seem to be hotter than the old ones though. Best to print both…
This is the first iteration of a Kobalt 24v battery wall mount; it can be mounted anywhere, because it has the locking cutout made in it as it does on the tools themselves. There are also some easy-out mounts (ones that do not have the…
Designed all my models in Fusion 360. used parametric design so I can make them work with any socket or wrench
A battery release button for my Kobalt 40v Leaf Blower broke, and there are none online that I can find, nor does Kobalt (Lowes) sell replacements. I have created this in Blender, printed it in PLA and have since used it successfully.
print settings - perimeters- 0 bottom layers - 0 upper layers - 0 fill type - giroid fill density- 30% (fill density can be changed according to requirements) the size of the bioball can be changed as required. bacteria settle reliably in…
Gridfinity holder and organizer for Kobalt 3/8" drive metric sockets. Slots for 19-9mm, both regular and deep sockets as well as extension. Organizer fits in a 3x5 gridfinity footprint and is 3U tall. Lettering is embossed 1mm onto the…
Wall mount for two 24V Kobalt batteries. Requires 2 screws to attach to wall.
A lid holder that utilizes magnets for the Kobalt Mini Toolbox Magnets used are 2, 3mm x 8mm cylinder magnets I had on hand that are inserted into the print
I couldn't find a ¼" socket set holder that I liked. All of them had a 6.5mm, which I don't own, have never needed, and have never seen in stores. This is designed to hold my Kobalt ¼" metric set in my Gridfinity organizer. Numbers are…
Tiskl jsem to na PLA, 0,2mm s podpěry všude. Opatrně při odstraňování podpěr.
Based off R Ballard Design's inserts but I wanted to be able to store some pens or brushes in the bottom drawer. Made the walls slightly taller and rounded the bottom corners to make it easier to get in and out. Including a pic of the…
This is my 1:16 Scale RC Global Hawk drone model. This project is a continuation of my Ardupilot series and it combines many new interesting solutions like V-Tail, Flaperons, Skis and Electric Jet Thruster. It was also my first time…
Adapter to allow you to use a Kobalt(Lowes) 24V battery with your Dyson V8 Stick Vacuum. Will probably work with other versions of Dyson vacuums. Allows you to use longer lasting batteries and quickly swap to a freshly charged battery…
O-ring failed on my portable 24v inflator and i found the problem to be a bad seal on the pump. Its a tight fit but work. Use as many perimeters as you can and .16 layer height.
I designed this 3/8 metric socket holder for my Kobalt socket set. The holes are made to fit with about 1mm extra space. Note: the Kobalt 3/8 short sockets are not the same external dimension as the deep sockets. This model is for the…
This is a little something I whipped up to hang my 24v Kobalt tools from the underside of a bench, or in my case some cabinets. Print Settings Rafts: No Supports: No Resolution: .2 Infill: 25% Notes: Designed to print standing upright…
Designed all my models in Fusion 360. used parametric design so I can make them work with any socket or wrench
I have about four of these on my benches. Convenient, but I wanted to maximize space. I did not see that anyone ever made some of these for the Kobalt boxes, so I modeled up my own in Fusion. So far they work great. The extra bump inside…
This is for the Kobalt (Lowes hardware) 12 inch dual bevel sliding compound miter saw item# 0358936 / model# SM3055LW. I bought my saw probably 8 years ago now but I'm pretty sure they still sell a derivative of this saw at the stores. A…
Keep your cables organized and go from a bin of tangled wires to a bin of plugs. Fast and simple print. No need for supports, and only uses ~10 grams of filament. Plug your desired plug in, wrap the cable around and use the channels to…
General purpose Kobalt power tool battery adapter. I use copper pipe hangers to make the terminal plates. I use screw inserts and 6-32 screws as the screw terminals. The batteries are well priced at Lowes. I regularly see the Li-ion 1.5Ah…
I took on the challenge to create the most surface area possible in a bio ball while also keeping a design that would let you print without supports: I came up with this design, and while it may not be the most mathematically possible, it…
A two-piece print I designed to organize a 3D printer toolkit in the top of the Kobalt Mini Toolbox. I printed at low settings .4 layer height, 180mms and it took a little over an hour for the largest part. The second took about 20…
Logos for Kreg, Kobalt, Fisch and Weller If you're looking for a particular logo, let me know and I'll try and get it for you.
I made this based off some screenshots from the game reveal, the dimensions of my model should be either really close to the actual thing, if not better. I printed mine with 3 walls and lightning infill out of PLA and it seems strong…
Router mount for the Kobalt Corded router to mount to the MPCNC Primo Version. Item #5207238 Kobalt Lowe's https://www.lowes.com/pd/Kobalt/5014100299 Model #K7TR-03
Router mount for the Kobalt Corded router to mount to the LowRider3 CNC, includes dust shoe. Item #5207238 Kobalt Lowe's https://www.lowes.com/pd/Kobalt/5014100299 Model #K7TR-03 Aza came up with a great idea to use clear filament to let…
I'm working on a short nozzle for the Kobalt 24V blower (Model #KHB 4224A-03) to use while drying cars. I needed something quickly, so I just designed an attachment that attaches to the tip with an interference fit. The current iteration…
Gridfinity holder and organizer for Kobalt 3/8" drive SAE sockets. Slots for 7/8"-5/16", both regular and deep sockets. Organizer fits in a 2x5 gridfinity footprint and is 3U tall. Lettering is embossed 1mm onto the organizer and only…
Gridfinity holder for Kobalt 3/8" drive ratchet. Organizer fits in a 1x5 gridfinity footprint and is 3U tall. Lettering is embossed 1mm onto the organizer and only uses around 0.14 grams of filament if you want to print it in a second…
This is a blank plate for a kobalt table saw. There is a pre made cutout for the riving knife. Need to insert 4 - 5mm threaded inserts into the 4 holes along with 4 grub screws to level the plate. I used PETG on a 400 x 400 bedslinger.…
Printed with elegoo PLA Pro on my Sovol SV06 plus. 3hr. 12min for my settings in Cura Slicer. UPDATED 12/13/2024: Added correct files
This is a small holder made for Kobalt Batteries. It complements my design for a tool holder for 24v Kobalt tools. It will mount your tools and batteries under a cabinet or bench. This is optimized to print without supports. Simply print…
Wall mount for Kobalt 40V Max 520 CFM Gen4 Leaf Blower
This is a remix of AaronOaks ¼" socket organizer. There were a few sockets that I didn't come with my Kobalt tool set so I removed them. Numbers were rotated for ease of reading. Measure your sockets for fitment before printing. Sizes of…
I didn't see too many models of the SG Go belt clip out there with proper retention so I made my own model. There are two models one with an 8mm gap and another with a 16mm gap for thicker belts. Printed Material: PLA/PLA + Layer Height:…
Gridfinity storage for your Kobalt Folding Utility Knife. https://www.amazon.com/Kobalt-Utility-Blades-Foldable-Release/
Couldn't find a model so I made one real quick, using it to convert a powerwheels truck from 24v to 40v, used spade connectors glued into mate up to the positive and negative ports, added holes for ¼'x20 bolts to mount it, it's a snug fit…
This adapter is sized for my particular Miter Saw (a Kobalt from 2015-ish) to the hose on my Shop Vac (a Ridgid hose from this kit). The outer diameter of the Miter Saw end is 55.5mm; the outer diameter of the Dust Hose end is 53.5mm.…
Po pár prasklých obalech z Číny jsem vytvořil vlastní a sedí perfektně. Pro tisk jsem zvolil materiál PP, je pružný, takže jde pěkně nasadit, a navíc je téměř nezničitelný.
The GlobalEye is a modified Bombardier Global 6000 business jet designed to provide multi-role airborne early warning & control (AEW&C) platform from Swedish defence and security company SAAB . Model is small to be used as a desk model, I…
This is a wall mount for the US General or Kobalt Mini Toolboxes. I created this because someone suggested something with a dowel under the mounts to hang something (or hand towels). This uses a 1/2 inch dowel, 12 inches long. 280mm seems…
These are inserts for the Harbor Freight or Kobalt mini toolboxes. The "Top Insert" fits the tools that I use most while printing. The "Top Drawer Insert" fits pretty much everything that came with my Centauri Carbon Accessories Pack.…
I dropped my leaf blower and the latch that holds in the battery broke. I submit my replacement, the kobold. What else would you expect from route 3D6? print 100%infill with supports on bed and sand the pins, I had to shoot some wd40 onto…
Print this bottom to allow integration of a kobalt 24V battery to the 18V ryobi tool. Use the top part from the linked model for the RYOBI half. For terminals on the kobalt half Use spade terminals or appropriate ring terminals and…
Wall mountable holder for Kobalt 40V batteries. Designed to store my many Kobalt batteries up and out of the way by attaching them directly to some 2x4s along my garage walls.
Tištěno bez podpor 0,4 nozzle 0,16 layer
Hello, this is the first model I am posting let me know what you think!!! Please feel free to show me what you use these models for Top part 1-2 fit into the flip open top of the box they should fir either way. The 227-mm and 228.5-mm…
Designed all my models in Fusion 360. used parametric design so I can make them work with any socket or wrench
This is a connecting ring to allow the US General and Kobalt mini toolboxes to be stacked. The lid can be opened, add the connector, stack another toolbox on top. UPDATE: I added a version 2.0 for those that want to modify their toolboxes…
Printed at 0.28mm layer height for speed!
Printed with PLA on a Sovol Sv06 plus
Kitchen drawer divider for Mobalpa Kitchen. Séparateur de tiroir de cuisine pour cuisines Mobalpa. Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: No Resolution: 0.4mm Infill: 15% Filament: Prusament PLA Galaxy…
These durable and stackable Kobalt storage crates are readily available from Lowes hardware store or other online sellers such as Amazon. I purchased mine for $17ea. Please note: This model is provided primarily for rough dimensional…
I got tired of losing my screw bit for my Kobalt drill/screwgun. I designed a bit holder that attaches where the belt clip mounts to. It holds two 1/4" screw bits. You will need an M4x10mm Hex Button Head Cap Screw. It should be a button…
I designed this 3/8 metric socket holder for my Kobalt socket set. The holes are made to fit with about 1mm extra space. Note: the Kobalt 3/8 deep sockets are not the same external dimension as the shallow sockets. This model is for the…
Organizer for Kobalt midget wrench set. Print instructions Organizer for Kobalt midget wrench set.
Wanted to better organize the small parts I keep in my Kobalt Mini Toolbox. Made this small tray insert that prints on one plate. Has a few different size bins built into the overall tray design.
Dado stack insert plate for an 8" dado stack on a kobalt TS10601 jobsite table saw. I believe the TS10602 is the same. You must modify the riving knife in order to use this plate and a dado stack on this particular saw by disassembling…
Battery holder for Kobalt 80V lawn equipment batteries. Heavily influenced by Joe-OSU- 's Kobalt 40V Battery Holder Wall Bracket . I've remodeled this mount from scratch, and have included a 2-hole version for vertical mounting and a…
I was dissatisfied with the Velcro belt clip that shipped with the Shooter Global Go timer, so I made a removable clip that dovetails and friction locks into the existing rear clip mount. This is a 3 part assembly that is held together…
HSW holder designed to fit the Kobalt deburring tool and possibly others. Hooks are roughly 11.5mm in distance. No specific parameters but printed mine in PLA at 120/mms Thanks for checking it out and happy printing!
I designed this 3/8 Imperial socket holder for my Kobalt socket set (both shallow and deep). The holes are made to fit with about 1mm extra space. I wanted to build this on a 4x2 so I had more options in my tool drawer. I used the…
Věšák na medaile . Medal hanger . Fotbalový míč . Football
This is a bracket that can be used to design your own accessories for the CaseStack or use it to add some color to unused mounting points.
This a holder for you Kobalt electric screwdriver and bits, I have included two options a 1x5x5 unit and a 2x5x5 unit. The smaller of the two is what I have made and have pictures showing, as the mini toolbox doesn't have a lot of room,…
Cobalt Bee is a bee from the Roblox game Bee Swarm Simulator created by Onett. I superglued the top onto the bee. Crimson Bee Companion
Insert for DeWalt/Craftsman ToughCase+ Kobalt 1/4" 19 Piece socket and ratchet set - https://www.lowes.com/pd/Kobalt-Universal-19-Piece-Standard-SAE-and-Metric-Matte-Mechanics-Tool-Set/999957955 These will not work for DeWalt's old bit…
I remixed this to remove some material, shorten print time and make it look a little nicer with chamfered edges.
This is a flat nozzle for lifting wet debris. It comes in 15 and 20 degree angle versions. As this blower is quite powerful there is a significant torque applied by the 20 degree nozzle. The area of the nozzle is 90% of the normal…
This is a push down style speed loader for the ‘new’ (as of 2025) Global Ordinance USA made solid black mags for the 9mm Stribog. The feed lips on these mags have a different geometry than the older translucent mags with or without metal…
cool plane. should print without any supports except for the engine intakes, but most parts will most definitely need brims or rafts. especially the wings. civilian version coming soon (Bombardier G6000) no clue what else to put here lmfao
A Bacto-Ball container for bioballs to hang in the aquarium or technical tank. Ein Bacto-Ball-Behälter für Biobälle zum Aufhängen im Aquarium oder im Technikbecken.
This is a model I made to wall mount my 40v Kobalt batteries. I printed it vertically with 20% infill and no supports.
The original is meant for a smaller level but I wanted a larger one for holding my Kobalt level
This is a platform created for the US General and Kobalt Mini Toolboxes. This raises the box up enough so that you can open the bottom draw without hitting things on the table. There are two models and two versions. There is a model with…
Gridfinity holder for Kobalt Retractable Utility Knife
Really like the design (reviewed the timeline in Fusion 360, a lot of love went into the design) but I remove magnets and screws from most things I print. Figured if I wanted a variant without, others may as well. Given that the bin was…
