416 models
Modified jaws for gripping at an angle. I use them for soldering components to PCBs.
Print approx. €1.25–€1.53 excl. taxPreliminary estimate for PETGSource material: PET
Description This is a heavy tape dispenser, If you have never used one, a heavy tape dispenser allows you to pull tape from it using only one hand while the other is free to hold the thing you want to secure in place. The dispenser is…
Print approx. €12.51–€15.29 excl. taxPreliminary estimate for one variant
This is a fruit fly trap, reminiscent of the iconic Sydney Opera House. It screws on as a lid on standard 50 mm diameter glass jars. Taco sauce, jam and Dijon mustard are products commonly sold in this smaller jar size. I fill mine with a…
Print approx. €2.43–€2.97 excl. taxPreliminary estimate for one variant
Dies ist eine einfache Ablage für unsere Bedienungsanleitungen einiger Küchengeräte. So bleiben die Anleitungen übersichtlich. Die Abmessungen sind 200 mm lang x 150 mm hoch x 40 mm innen (46 mm außen). Auf der Unterseite befinden sich 4…
Print approx. €8.13–€9.94 excl. taxPreliminary estimate for PETGSource material: PET
Replacement for broken and hard-to -use fan switch operator. Printed here in PET-G @ 0.3 layer height. Remove the front panel and un-snap the existing operator from the slide switch. Some small filing on the case will be needed to fit the…
Print approx. €0.21–€0.26 excl. taxPreliminary estimate for PETGSource material: PET
100x160mm sign, to let the world know your interociter is operational and available. Mesh and Solid models provided. The solid version might be an easier print. Best with color switch above 1mm, as with included gcode for the mesh…
Print approx. €1.35–€1.65 excl. taxPreliminary estimate for one variant
The description of this light fixture on Amazon is “Under Cabinet Lights, Quntis 54 LED Rechargeable Battery Operated Motion Sensor Light Indoor,2200mAh Magnetic Dimmable Closet Lights, Wireless Under Counter Lights for Kitchen, Wardrobe,…
Print approx. €0.50–€0.61 excl. taxPreliminary estimate for one variant
UPDATE 2022-11-02: A number of people have reported that the clips are a little too thick to insert without a lot of force or sanding. I added a version of the clip that is 0.6mm thinner. It is named ThinnerClip.stl . You may wish to…
🇦🇺 Welcome to Australia! The Sydney Opera House is one of the world's most iconic buildings and a symbol of modern architecture. It is not only an icon of Australia, it is also our representative of Oceania in the Wanderlust Collection of…
An elegant phantom mask. Should be printed with supports (tree) and rafts for good bed adhesion. Can be heated and adjusted to fit face better. I just used a hair dryer. Holes may be drilled for retention string. or can be attached via…
This is a case for the Pocket Operator series of synthesizers made by Teenage Engineering. Its main features are: Keys move freely LEDs are still visible Audio sockets accessible with standard sized rubberized jacks Possible to keep the…
This is a coin operated vending machine designed for fun-sized candy bars. It takes American quarters or the included discs of the correct size. Use the key to unlock to door on the back to restock the machine and access the coin drawer…
🔧 Real Utility Knife Remix – Compact, Locking, One-Hand Operable This is a thoughtfully re-engineered remix of the excellent original model: https://www.thingiverse.com/thing:3677766 I made several key improvements to enhance…
I recommend that you print the model with tree supports and rafts for bed adhesion. It can be heated and adjusted to fit the face more comfortably. I simply used a hair dryer. It is possible to drill holes for the retention string. I…
hi there! This is a case i designed for my own use for my pocket operator but figured others might have a good time using it too! Requires: 2x M3x4x5 brass heated inserts - link 2x M3x5mm bolts - link Print settings: I used a 0.2mm nozzle…
Comme ma nièces à tendance à perdre les pièces, voila des pièces de rechange du célébre jeu "Docteur Maboul" (Operation en anglais). on peut imprimer tous d'un coup ou chaque pièce séparement: -Pomme d'Adam -Os de vœux -Cœur brisé -Os…
I like the “Keychain Knife” from k-eye a lot but missed some safety and comfort features. So I redesigned a new one with his design as a reference. For safety I’ve changed the front portion for better grip and to prevent the fingers from…
Ready files to print on Prusa Core One Check the original Model for full details here: fast-operation-vise Check this video by Christoph Laimer explains assembly and how it works.
Case for Teenage Engineering's Pocket Operator. This case is compatible with the wire folding stand, and the loop at the top doesn't need to be removed. All LEDs shine through a small hole above each button, and there is a hole to allow…
this was created under Riot Games' "Legal Jibber Jabber" policy using assets owned by Riot Games. Riot Games does not endorse or sponsor this project. dm me for more models, happy printing
Incase Prusaprinters glitches out again you can find it also here: https://www.thingiverse.com/thing:4881488 This gun shell is a replica from the Operation Wolf Arcade game. It is assembled much like it's sheet metal and steel father, but…
I'm really happy with how this one turned out! The Drone Operator Pack will serve your Dummy SWAT or Military team well. They may be the nerd of the squad, but it's still nice to have them around as a set of extra eyes. The drone has a…
Excellent original design that ticked almost all the boxes for me. I removed a few millimeters around the face edges to fully expose the lovely board design and removed the block portion of the lower back so that it can sit on its built…
I added icons and numbers to the Pocket Operator buttons to make it easier to understand. I added an optional button for the function button. I created a note icon for the PO-16, but the generic star will work fine for others as well.…
I remixed this to have a larger base allowing clamps.
Update: Since people have issues with the strap holders/holes breaking Ive added a Hardened Version with thicker holders that are roughly double the volume. These are a bit more bulky but should work better with most filaments/printers.…
Knobs for the potentiometers of Pocket Operators. Use a small screwdriver to wedge open the knob a bit and place it on the potentiometer. If the knob is too loose and spins on the pot you can shrink x and y a bit in your slicer. The knob…
🔥 The most complete set of Digits & Letters (lowercase and uppercase) with operators, with or without square bases for kids to learn alphabet and spelling. There are also boards for the letters and digits. There are stl files with all…
This Kit Card Kit Kat was modeled with absolute precision to fulfill one single, unique mission : to serve absolutely no purpose . And honestly? It executes this to perfection . Its cutting-edge engineering guarantees a 100% practical…
What? A onehand operated tool that can squeeze a stick of churu or whatever liquid pet treat you wish, into a spoon that can be slotted into the device. Much like the ones you find on amazon: Why? You need the other hand to groom or wash…
As the thread was too fine for me I extended the thread, reworked the slider (white) and the transfer-screw (orange, 2x) and exchanged these parts. Now happy with the performance.
I optimized the OG mask to fit my own face with small modifications mostly on the forehead and the eye.
Each model features dynamic poses, tactical armor, and detailed equipment, designed for 32mm tabletop wargaming and display. All miniatures are optimized for resin printing with clean detail and minimal supports required. Perfect for…
4xM3 screws are need to attach the side pieces to the middle. Any type of head should work and they should be at least 5 mm long. You can go up to 30 mm, but have fun screwing it all the way :p To install the PO in the case, just remove…
Update: Adding a new base with large opening (from 40mm to 45 mm) for thicker bench top. The v-grove is removed in this base. Introduction: This is a versatile hand stabilizer that could be used in any shop that requires precise…
Simple case for a Teenage Engineering Pocket Operator PO-33 K.O! I don't have any of the other PO models to test with, but imagine it would fit them also. Simple design, slides in/out without forcing (but stays in). I printed this several…
Высокодетализированная 3D-модель бойца спецназа воздушно-десантных войск Российской Федерации (45-я отдельная бригада спецназначения). Модель выполнена по актуальным референсам 2024–2025 годов и отражает реальный облик современных…
Designed this prop opera glasses / theater binoculars for a friends birthday. There are holes so you can look through them. I printed them "looking" upwards. Supports are needed for the middle bit and under the arm. Enjoy! Category: Props
A fairly simple mask. Easy to print. Attach the Holders on all 3 sides. Glue or M2/M3 screws works. Feel free to choose what looks better for you. The elastic band is 2cm/20mm wide. Fasteners and back part are the same as my other mask.…
Usage This roller clamp can be used on elastic tubing ranging from only a few millimeters up to 16 mm in diameter. The main difference between the models is the wall thickness of the tubing: The 12 mm model works for a wall thickness of…
This pinch valve allows you to control two low pressure fluids by pinching silicone hose. Designed it so that when servo turns to 0 or 180 deg, it pinches 3mm ID 5mm OD hose enough to block flow of fluids and at the same time makes sure…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
Model I ran across many years ago. I later modified it to be a Ham Radio call sign desk display. I've included both the original and my call sign one. Print Settings Supports: Yes Category: Electronics
I recreated some classic (JDM-)wheels. They're approximately 1:3 scale and have an diameter of around 13.5cm and a width of around 9cm. They're not a perfect copy as I drew them just after some pictures from the internet. Print them as…
Представляем вам 3D-модель бойца элитного спецназа ВДВ РФ — военнослужащего 45-й отдельной бригад
I designed this OZ Opera inspired rim. It is meant for Hot Wheels customization and not to 1:64 scale yet.
Simple print for Epilogue's "GB Operator" that acts as a dust cover for the slot to protect both interior & pins. While leaving a game cartridge would prevent dust in the pins, it does not prevent dust going down the sides and being…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
This Is the Full Phantom Of The Opera mask.
Everyone I handed this toy too loved it, but always instinctively started operating it backwards, despite the arrow. It felt unnatural to insert the pull rod across the left hand, on the left hand side of the gear. I mirrored the design,…
This is a hard case for the Teenage Engineering Pocket operator series. Needed something to protect the synth while traveling (this case have been tested in rough conditions(i.e. my wife's handbag)). At the same time I prefer playing on…
A Phantom of the Opera style mask that I designed to be hung on the edge of a picture frame or mirror. It is based on the one that is actually worn by the Phantom in the show/movie so is the half face mask and as such should sit on the…
This is a slim case for the Teenage Engineering series of Pocket Operators with numerical buttons that is inspired by the official Teenage Engineering CA-X case. I was looking for a slim case for my pocket operators, but all the cases I…
Do you hate alligator clips as much as me? then this helping hand is for you! Version 1.2 Two upgrades in this version: High temp O-rings for better grip. The grip on V1.1 wasn't good enough. Two O-rings top and bottom provide the…
Buttons engraved with PO-20 model symbols. Compatible with the Pocket Operator case: http://www.thingiverse.com/thing:1375818 The "v4" version are the same buttons as included with the Pocket Operator case. The details of the symbols will…
I have mixed feelings about their recent use. It was not without reason, nor will it be without consequence. I did not create this model to express political opinion in any way. I do, however, find the GBU-57 MOP to be an impressive…
Made these to represent another prototype. Replace the struts with these. Print Settings Printer Brand: Anycubic Printer: Photon Rafts: No Supports: Yes Resolution: 0.05 Infill: 100% Filament: Siraya Tech PLA Grey Category: Hobby
The EUROTEN is a mounting frames to mount Teenage Engineerings’ Pocket Operators™ into the Eurorack. No screws Only the frame need to be screwed into the Eurorack. There are no screws required to mount the Operators into the frame. They…
This is a printable pedal operated trash can. The capacity is approximately 7.5 liters / 2 gallons. The design features a pedal mechanism to open the lid and a detachable bag retainer ring to hold a garbage bag in place for easy emptying.…
Replacement padwheel Category: Sport & Outdoors
Universal Monsters - The Phantom of the Opera - 1943 3D printable model.
The Time Tunnel - Operations Team - 1966 3D printable model.
Modified version of a Pocket Operator Case to allow 2mm optic fiber filament. Buttons not included in model.
Iconic Movie Moments - Pretty Woman - At the Opera - 1990 3D printable model.
Buttons engraved/embossed with numbers 1-16. Compatible with the Pocket Operator case: http://www.thingiverse.com/thing:1375818 The "v4" version are the same buttons as included with the Pocket Operator case. The "v4wide" version of the…
Das Logo habe ich selbst entworfen um es mit einem Drucker ohne AMS zu drucken. Dazu muss man für die unterschiedlichen Schichten eine Pause einplanen vor dem Druck um das Filament zu wechseln.
Another Operator Mask, this time the new Ghost Mask from Modern Warfare 4. As with most other masks i had to take some creative liberty making it decently printable and not too hard to assemble. Parts and Proportions might be adjusted if…
This payload drop mechanism attaches to https://www.printables.com/model/1400517-rak-19003-case-for-dji-mini-3-and-4-pro-with-hinge . Check the instructions on…
The flimpsy operating buttons in black did not make a good aspect to me. Put some color over them. Not much to add to the photographs. I used the oval knobs. Then you have to push. The round ones work too, but when you touch them to top…
Avoid the tragedy! I love the minimalist design of pocket operator, but found the hard way that LCD can easily crack without protection (see the leftmost PO-28 Robot). I've modified @ProteanProjects and @Randy1177 great friction-fit…
This started out as a simple project to test out printing some worm gears. I started designing a simple base to hold the gears so I could test them and I just happened to be snacking on jelly beans and thought "I should make a jelly bean…
This is a remix of the excellent model from Salvation76.......added 19mm to the length.
This 3D-printed travel case is designed to safely store and transport your Teenage Engineering Pocket Operator. It protects the device from bumps, scratches, and accidental damage while on the go. Design Features: Sturdy &…
Hey there, back with another operator mask. Assembly should be fairly straightforward, but heres a few notes Eye Inserts go easier into the socket from outside to inside. If they dont seem to click into place for you, consider decreasing…
I printed with a brim, which connected the buttons. I snipped off the edges of the brim to fit the case and insert the buttons like that
Ein Gehäuse für den Teenage Engineering Pocket Operator im klassischen vintage Synthesizer design. Hinweis : Für das Einsetzen der Pocket Operator in das Gehäuse, muss der PO Hanger restlos entfernt werden. Rückstände müssen evtl.…
This is a Scout class ROV designed for printing on a 300mm x 300mm bed printer, Such as a Lulzbot TAZ or Similar. It is Very much a work in progress. It is designed to use 4 Blue Robotics Thrusters, the Electronics package from the Open…
A case I designed a while back for my pocket operators. Its not perfect but it does the job. The case is specifically meant to be used with this connector:…
Ham Operator Sign 0.2mm layer, 2 walls, 15% infill
I’ve been a huge fan of Andrew Lloyd Webber’s rendition of Phantom of the Opera since a young lad. Late last year, I finally found the chance to watch the 1925 film version of the novel, starring Lon Chaney Sr. as the Phantom. While the…
A model of the Sydney opera house i made for a class.
[MMF FRONTIER] OPERATION HELL STORM - FREE join the campaign here: https://www.myminifactory.com/frontier/operation-hell-storm-support-free-4511 32mm for personal use only. Each model, were sculpted with both resin & FDM Printing in mind…
From Freytag & Associates Inc. Architects, Engineers : After fire destroyed the interior and roof of the Opera House building in New Bremen, Ohio, Crown Equipment Corporation chose to renovate the structure and construct an addition. The…
🔫 Nyx Virella, Twin-Barrel Operative Medium Humanoid (Augmented Human), Chaotic Neutral Armor Class 19 (Reactive Armor Plating) Hit Points 142 (19d8 + 57) Speed 40 ft. STR 12 (+1) DEX 20 (+5) CON 16 (+3) INT 14 (+2) WIS 12 (+1) CHA 16…
It's not perfect but i made this to replace the crumbling covers on my side lights / opera lights for my Grand Marquis. The part wasn't available online. It replaces GEM 350 light
The main reason why I made these plates was to learn FreeCAD - I wanted to learn and make something useful at the same time! These plates compatible with: * Fast-Operation Vise by…
Attention: I keep seeing people selling these models on Esty and eBay: Digital files and actual prints. STOP THAT! I have already gone after a few of them and got them banned. I will pull these off here if this keeps happening. I put…
This is my customizable air freshener cover. It consists of 4 pieces. An inner shell, an outer shell and a button which is made by gluing 2 parts together. Also, a standard air wick spray can is needed of course. By pressing on the big…
Light guides for Pocket Operator case: http://www.thingiverse.com/thing:1375818 The video shows the light guides (printed by shapeways) in action. These have not been tested for FDM printing! If you have some transparent filament, a good…
For 2024/05/17,05/21,05/25,05/28 Memorial Bluebird #青鳥行動, has been censored by Some SNS platform. This is a symbol of recognition of Taiwan’s sovereignty and democracy. Need blue and another color printing materials.
REMIX: slightly lengthened base fits better when I printed it. PO-32 Buttons printed separately, not included here
This is not my mini claw for my claw machine. It's fully functional and operated by only one 9g/SG90 servo. No AMS requried. You only need some plastic glue and the servo. How to build it: Remove support structure from black base plate…
longer handles for the Fast-Operation Vise. There is the XL-version and an even longer XXL-version of the handle. You can find the complete model here: https://www.printables.com/de/model/51074-fast-operation-vise
A old style boat operator for the Opduwer found here https://www.printables.com/model/1361310-rc-dutch-pusher-boat-opduwer . Was building the Opduwer and found that I need a periodic operator for the boat. So used ChatGPT to create the…
I had this project cooking for several months now, mainly because I had to take a break and actually play the game but today I decide it's time to showcase the end result of my 3D-printed Hackclaw figurine based on the original model. The…
![Ghost Nomad Operator Mask [Modern Warfare 4]](https://media.printables.com/media/prints/6926bb1d-47fc-4cd1-863e-0a0b062829ee/images/14145306_f7c10b51-ed8c-4c7b-a4a1-ac17c1ab126d_c3c875f7-70be-46df-aca0-3422990a9070/20261019_174354.jpg)
