3,327 models
A collection of 23 snowflakes with hanging loops for decoration purposes, 7-9 centimeters big. The same snowflakes without hanging loops are here . More big designs ↑ Link: 26 Big Snowflakes collection Smaller, 5 cm, designs ↑ Link: 34…
Print approx. €1.14–€1.39 excl. taxPreliminary estimate for one variant
I saw something like this at a restaurant and was able to make a similiar item for use at home. The print works well out of PLA filament and the fun colors are great for kids. Print time is about 8 minutes Of all the utensil holders I've…
Print approx. €0.13–€0.16 excl. taxPreliminary estimate for one variant
Enjoy snacking while keeping your hands clean with the Snack Finger Chopsticks ! Perfect for gaming, working, or just enjoying your favorite snacks without the mess. These lightweight, ergonomic chopsticks allow you to grab chips,…
Print approx. €0.39–€0.48 excl. taxPreliminary estimate for one variant
Inspired by the design from FUN CHOP chopstick helpers. Great for rounded chop sticks as well. Recommend Print in PETG for flex and strength. Recommend 100% Infill FunChop chopstick Helpers (Amazon Link⬇) https://a.co/d/1i6oWUr
Print approx. €0.20–€0.24 excl. taxPreliminary estimate for PETGSource material: PET
This system prevents the TS55 saw leaving the guide rail FS when cutting with the sloped blade. Even with a 45 degree angle the saw remains secure on the rail thanks to the 2 stops screwed on the sole of the saw Inspired and adapted from…
Print approx. €0.86–€1.05 excl. taxPreliminary estimate for one variant
Are you having a fight everytime you're trying to eat with chopsticks? This is your solution! 😉 These are fingertips with attached chopsticks. Just slide them on and enjoy a meal without chopsticks flying around. The finger tips are…
Print approx. €2.15–€2.63 excl. taxPreliminary estimate for one variant
Struggeling with chopstick? Put the chopsticks in de holder en go! nice and easy
Print approx. €0.21–€0.25 excl. taxPreliminary estimate for one variant
A little sanding is needed in the end.
Print approx. €0.79–€0.96 excl. taxPreliminary estimate for PETGSource material: PET
Chopsticks for decoration. If you want to eat with them, first cover with food-safe varnish. Its possible, the sticks were infested with bacteria, if you do not.
Print approx. €1.85–€2.26 excl. taxPreliminary estimate for one variant
Hold your chopsticks together until it's time to eat, then keep your table clean with this dual-purpose chopstick cuff holder and rest. Add a touch of elegance to a dinner party or just prevent losing your chopsticks during a meal on the…
Print approx. €0.23–€0.28 excl. taxPreliminary estimate for one variant
A chopstick rest that looks like a hippo head half out of water. I used Blender to sculpt it and rendered the first image shown here. The GCODE is configured under “Generic PLA” profile and 10% “Adaptive Cubic” infill for a Prusa MINI.
Print approx. €0.84–€1.03 excl. taxPreliminary estimate for one variant
Chopsticks holder with Japanese symbols - Mount Fuji, Bonsai, Torii gate, Rising red sun, Katana holder You can print the relief in one color or in multi-color, I added g-code for multi-color printing You can find another Chopstick holder…
Print approx. €2.20–€2.69 excl. taxPreliminary estimate for one variant
Easy to make a cute Triceratop keychain I printed in PLA Infill: 15% Layer Height: 0.20mm Supports: No If you like my work consider Buy me a coffee 😊
Print approx. €0.18–€0.22 excl. taxPreliminary estimate for one variant
Simply, but modern chopstick holder inspired by tradicional japanese architecture. Easy to print in vase-mode or: 0% infill 0 top and 0 bottom layers 2 outter layers Happy printing!
Print approx. €0.21–€0.26 excl. taxPreliminary estimate for one variant
This is a simple little Opening Tool e.g. to: remove phonedisplays open laptops/notebooks/tablets,… open/remove car parts remove E-cigarette-tank-glasses/atomizers or other areas of application…
Print approx. €0.38–€0.47 excl. taxPreliminary estimate for PETGSource material: PET
Student 3D designer chasing a dream. I don't own a printer yet, but every like and download truly helps. Thank you! All❤
Print approx. €8.48–€10.36 excl. taxPreliminary estimate for one variant
I needed some badges from Stranger things season 3 for cosplay. So I knocked up some quick name badges for Steve and Robin for the Scoops Ahoy costumes. Print instructions I have included the gcodes that pause for the colour change…
Print approx. €0.67–€0.82 excl. taxPreliminary estimate for one variant
Printing Notes: I reduced the perimeters from 3 to 2 to make the text look better. Printed at 0.10mm height. Filament used: Overture Matte Pink PLA Post print additional work: I filled in the lettering with the some nail polish. Make sure…
Print approx. €0.36–€0.44 excl. taxPreliminary estimate for one variant
Festool is very innovative in the further development of its tools and their details. Therefore, here is another anti-tilt for mitre cuts with the FS 55 EBQ and the FS/2 rail. Suitable for the 2011 model of the TS 55, which was the last…
Print approx. €2.00–€2.45 excl. taxPreliminary estimate for one variant
Magnetized tops for Redgrass painting handle with groves for 32, 28 and 25 mm bases. Requires 8x3mm magnets. Please be aware that the 28 mm bases are not held in grooves. There are also storage plates available to manage your minis during…
Print approx. €1.65–€2.01 excl. taxPreliminary estimate for one variant
I'm printing it with asa, 260C nozzle and 97C bed, 0.6 Nozzle. Put additional supports on enter, if no then it will roll up.
Print approx. €45.93–€56.14 excl. taxPreliminary estimate for one variant
Print Tips Material: PLA Layerheight: 0.2mm (BALANCED) Perimeters: 2 Infill: Grid Support: Yes (Automatic)
Print approx. €1.46–€1.78 excl. taxPreliminary estimate for one variant
small diameter depth stops, cone nose to aid in chip clearance and visibility, uses 3mm x 12mm Cap head bolt and 3mm hex nut
Print approx. €1.05–€1.29 excl. taxPreliminary estimate for one variant
Such a cute little dino bride! Printed my version without a support around the tiara, hence the missing swirls in the picture, but I love her anyways. Be sure to add supports and be careful removing any generated supports beneath the veil…
Print approx. €10.83–€13.24 excl. taxPreliminary estimate for one variant
Hello, Welcome to my profile, full of models and miniatures :-) I have here for you Hoops for paper spools for filament Pro AMS Thanks to it, the spools unwind much better in the AMS system and do not jam. For proper operation, 2 pieces…
Print approx. €1.05–€1.28 excl. taxPreliminary estimate for one variant
I made a tiny propeller for Lukas Hannert's high-speed propeller launcher found here https://makerworld.com/en/models/628601-high-speed-propeller-launcher?from=search#profileId-553231 . I made the small version of his launcher(available…
Print approx. €0.38–€0.47 excl. taxPreliminary estimate for PETGSource material: PET
Turn your elegant dinner party into an intergalactic trench run at a hotpot's thermal exhaust port. In the attack position, these chopstick holders transform into chopstick support rests, protecting your table from Imperial food stains.…
Print approx. €0.45–€0.55 excl. taxPreliminary estimate for one variant
This simple 3D-printed end stop prevents your IKEA Drona box from going too far into the back of a Kallax shelf, ensuring it sits flush against the back wall. It's a quick and easy way to keep your Kallax tidy and organized.
Print approx. €0.96–€1.17 excl. taxPreliminary estimate for one variant
Store eight minis during painting based on my magnetic tops for the Redgrass painting handle . There is also a rack to combine 3 of the bases for easy transport. Glue 5x2 mm magnets at the top of every stem to harness the power of magnets…
Print approx. €1.40–€1.72 excl. taxPreliminary estimate for one variant
Bottle opener in dinosaur shape. It represents a Triceratops. I recommend to print the front half of the head with at least 3 perimeters and at least 15% infill density. My tests were all printed with PETG. Flaschenöffner in Dino Form.…
Print approx. €0.49–€0.60 excl. taxPreliminary estimate for PETGSource material: PET
Ever been in a chinese restaurant and faced the problem where to put your chopsticks when they have to be set down during a meal? This Gadget solves your problem. For sure in credidcard format and as a print in place design. No support is…
Print approx. €0.90–€1.10 excl. taxPreliminary estimate for one variant
Chopstick Buddies are attachments to a plain chopstick. They are designed for beginners, and for a sizable population who cannot hold unaided the thumb pose required by the traditional, standard chopstick grip. See Chopstick Buddies on…
Print approx. €1.26–€1.54 excl. taxPreliminary estimate for one variant
Magnetized tops for Redgrass painting handle with groves for 40 mm bases. Requires 8x3mm magnets. There are also storage plates available to manage your minis during paining. The rack for those plates are also working, just stacking…
Print approx. €1.58–€1.94 excl. taxPreliminary estimate for one variant
Chopstick Buddies are attachments to a plain chopstick. They are designed for beginners, and for a sizable population who cannot hold unaided the thumb pose required by the traditional, standard chopstick grip. See Chopstick Buddies on…
Print approx. €0.43–€0.52 excl. taxPreliminary estimate for one variant
Magnetized tops for Redgrass painting handle with grooves for 50 mm bases. Requires 8x3mm magnets. There are also storage plates available to manage your minis during paining. Attention: Since the 50 mm bases are too big, the rack for…
Print approx. €2.29–€2.79 excl. taxPreliminary estimate for one variant
Chopstick trainers for standard takeout chopsticks
Print approx. €0.47–€0.57 excl. taxPreliminary estimate for one variant
This eye dropper retainer is designed for those that need to take two types of eye drops, one in the AM and both in the PM. I place the eye drop containers in the holes marked either ODD or EVEN, based on the day of the month. On an Even…
Print approx. €2.22–€2.71 excl. taxPreliminary estimate for one variant
For the perfect card storage I recommend the size "Base_Card_Deck.stl " for the box, you can fit a deck with 100 cards plus a sidedeck and sleeves loose in it, also I recommend the "Long Latch.stl " as latches, because it can be with the…
Print approx. €1.64–€2.01 excl. taxPreliminary estimate for one variant
This is the Rock that you can impale in the eyes with chopsticks. it has little ski-like things for support while holding the weight of the chopsticks.
Print approx. €1.24–€1.51 excl. taxPreliminary estimate for one variant
type of nomal position
Print approx. €0.34–€0.42 excl. taxPreliminary estimate for one variant
Can hold 4 chopsticks, works best if you sit face to face. Here are some chopsticks, wich fits perfect.
Print approx. €3.64–€4.45 excl. taxPreliminary estimate for one variant
Der "DropStop CleanCap" ist ein innovativer Dosieraufsatz für Flüssigwaschmittel, der gezielt das Tropfen, Kleckern und Überschwappen beim Ausgießen verhindert. Das Gerät wird direkt an die Öffnung handelsüblicher Waschmittelflaschen…
Print approx. €2.63–€3.21 excl. taxPreliminary estimate for PETGSource material: PET
Učební pomůcka na procvičování znalostí o státech Evropy. Žáci přiřazují státy k daným pojmům, rozdělují je do skupin podle určených kritérií - polohy, státního zřízení, povrchu, vodstva,....
Print approx. €0.40–€0.49 excl. taxPreliminary estimate for one variant
Don't believe the hype, three horns can be friends with long necks Cera! This cute and simple Triceratops dinosaur friend makes an excellent desk companion, gift for a child, or friend. They are a companion piece to my previous dinosaur…
A tiny cute triceratops that uses just 5 grams of filament. Great as a cute decoration, keychain, or little desk dino. Print Settings : Layer height: 0.10 mm Infill: 15% Grid Supports: Yes Support type: organic Fuzzy Skin: Outside walls (…
Edit: 23. 2. 2026: I published an updated version here . It's better, so you should definitely download Gertrude instead. Edit: 23. 7. 2026: The updated version is now capable of carrying a dino rider. Try it out! This is my second flexi…
Hi everyone this is a finger chopstick I made. It has offset teeth for better grip of small objects.
Rails are designed for 6Gx20mm countersunk screws (or 4mm x 20mm)
I love dinosaurs :) This is another flexi-articulated cute little model that I made in a weekend. All overhangs were modeled at 45° to ease the fabrication process without supports. Any doubt or comment about this model please let me know…
An articulated dinosaur skeleton with a removable skull. Triceratops, Styracosaurus Xenocerotops and Diablocerotops skulls included. Easy to print and should not need supports. Print with 2 or 3 walls @.16 layer height.
ChopstickCheaters to let your kids eat with chopsticks. Easy and fast print and a lot of fun! V2 now prints with no supports. Use PETG to be able to put them in the dishwasher. PLA works fine but may not stand the heat. Made for…
Dr Doom Mask - Marvel Doctor Doom Helmet - Cosplay Props - FREE STL PREMIUM STL File for 3D Printing Follow me>>>: All My Designs: https://linktr.ee/3dprintmodelstore You can support my design work by joining my patreon at here:…
This object is part of “Scan The World”. Scan the World is a non-profit initiative introduced by MyMiniFactory, through which we are creating a digital archive of fully 3D printable sculptures, artworks and landmarks from across the globe…
I printed in PLA Infill: 15% Layer Height: 0.10mm Supports: Yes, organic If you like my work consider Buy me a coffee 😊
Simple Triceratops Dinosaur Kit Card More Kit Cards by us @3Z3D: DinoCards: https://makerworld.com/collections/24594404 BugCards: https://makerworld.com/collections/24891663 Triceratops Dinosaur Kit Card Instructional Build Video:
Want to access even more models not found here ? Interested in supporting my efforts making free models for the world to enjoy? Check out my patreon page here: https://www.patreon.com/minishev Patrons have access to all my files in one…
The doors are assembled by using filament as hinge rod. Insert it from bottom and up. The fridge is sized to fit with Sylvanian families the material should be thick enough to be re-seized to also fit Playmobil. Just contact me if that…
A simple yet elegant chopstick clip. Keeps chopsticks aligned and secure before, during, and after use. A discreet acces
Joined the four bottom parts of the original so that no screws are needed for assembly. Also made two different new tops. The middle ring remains the same as the original. Hope you like it and have fun!
I like the Finger Chopsticks from @MrDaedelus but they often slip from my fingers. It's also not possible to strech the chopsticks so i made a modded version. Normal: Diameter of the finger rings is around 22mm or 0.9 Wurstfinger. Small:…
This is a canopy for the BetaFPV Air Tinywhoops, like the Air65 and Air75. The longer tail section allows a lower camera angle to be set. I also made a widening in the area of the right holder to additionally fix the antenna connector. I…
Popsicle Layered Fidget Toy 3D PRINTING SETTINGS Layer Height 0.2mm PLA works great 15-20% Infill Supports needed. Print in place. Dimensions of Popsicle: 2.75 in. X 5.5 in. x .75 in. I do not recommend scaling the print smaller due to…
These painter’s props (also called painter’s pyramids) let you elevate your workpiece while painting, staining, or finishing. The small pointed tips minimise surface contact, allowing you to work on both sides without sticking or marking.…
Scan of a triceratops skull. Print instructions print with supports and 0.2 mm layer height using 20% infill.
I designed this Chopstick Holder set with tray in SOLIDWORKS for the Printables Chopstick Holder contest (18/02/2023). It is already orientated to print easily in STEP & STL files so no supports required. The 4 Chopstick Holders fit…
Reupload from https://www.thingiverse.com/make:1001365
It took me way too long to finally put a hole in my models, so you don't have to pierce their eyes anymore (I'm looking at you, Ludmilla!) I mean… So go ahead and make your keys heavier! The heavier the key ring, the more important the…
Meet the Special Ops Gnome – locked, loaded, and ready to defend your flowerbeds with elite precision. Fully geared with tactical armor, utility pouches, and a detailed rifle, this badass bearded warrior brings serious attitude to your…
A collection of 26 snowflakes with hanging loops for decoration purposes, all about 9 centimeters big. More big designs ↑ Link: big 23 Snowflakes Smaller, 5 cm, designs ↑ Link: 34 Snowflake silhouette collection ↑ Link: 34 Snowflake…
I used the new new Prusaslices Multimaterial Painting Tool on and colored https://www.thingiverse.com/thing:250645
Chopstick helper for sushi, sashimi, noodles etc...
An anatomically accurate model of the skull of Trick, probably the largest triceratops found in the world and one of the unique exhibits of the Dinosauria Museum Prague. 3D scanned using photogrammetry by Prusa Research. Czech description…
🦖 Cute Triceratops Mini – Tiny Dino Figure 📝 Description 🔒 This model is protected by copyright If you want to sell physical prints, check the subscription here: 👉 https://www.patreon.com/cw/Nieuchronny 🦖 Adorable mini Triceratops from my…
What started out as a remix has now been completely overhauled in CAD to require a bit less Y-overtravel and be a bit more robust. If you are here to reprint a specific part, or using parts from other remixes, it may not fit together…
Love my designs & wanna support what I do? Join my cozy little fam on Patreon 👉 patreon.com/draftaxis 💞 Your support there keeps me motivated and helps me create even more adorable models for everyone! 🌸💪 — Here's my newest knitted-style…
A replacement for my original chopstick storage box. I added the Kumiko to give it a more traditional look. Prints with no supports and 100% infill. Internal box dimensions are: Small Box 260x35x20mm, Large Box - 260x65x20mm Update! Added…
Cyclops Guide by ModBot ( Thank you for the great video ) Latest Update 22 September 2024: -Version 1.9.1 with better tolerance -PTFE tube connector -stronger tension arm ----------- Exciting News: Cyclops Extruder is Now in Open Beta!…
⚡ CLICKFLOW – IMPORTANT INFO 🔧 Assembly Note: This model was tested using a blue mechanical keyboard switch . For a more secure and durable assembly, I recommend using a small amount of glue on the connecting parts to keep everything…
This triceratops fidget toy can be printed in any colours with easy colour customisation. Please note this is a standard fidget toy and not the keyring version.
Made the finger holds a little more robust. V2 changes: changed teeth at the end of stick.
Companion project to my other parametric configurable FPV designs: Pod | O4 | Frame Whoop Action2 , 3-5 AcePro GoPro Mini Hero 9-12 Antenna Mount Protect your FPV camera with TPU in front of the lens for maximum protection but still with…
Description A simple and functional heart-shaped clip that keeps chopsticks aligned and easy to use. It improves control, making it great for beginners and everyday use, while adding a subtle hearth accent. Sizing Depending on your…
Great for birthdays, Christmas, and more! happy printing!
I designed a Chopstick Helper, because I didn't like the existing models. My design focuses on stability and should fit most chopsticks (see photos). The holes are angled slightly to make the chopsticks spread apart a bit at the bottom.…
This is an updated version of my older visor. Sleeker, and more akin to the 90s television show
Add a fun and spooky touch to your Halloween setup with this collection of cute & spooky 3D printable props! Perfect for party decor, desk displays, photo setups, or themed miniatures . Each model is easy to print, optimized for FDM or…
I was looking for a new scoop for my hot chocolate mix (since it didn't come with one) that was both good looking and easy to print ( 45deg angles or better! ). I was going to make just one, but then got carried away and figured they'd…
Finger Chopsticks. Category: Kitchen & Dining
Simple flex plate stops using either M3 or M5 screws, reversible design has holes for both options. I ended up using socket head cap screws, these don't take up and build volume and work well. If you use button head cap screws you do lose…
Want to access even more models not found here? Interested in supporting my efforts making free models for the world to enjoy? Check out my patreon page here: https://www.patreon.com/mz4250 Patrons have access to all my files in one…
Easy to print..with support ideal more scale..and fill max 5%
This is a 3d model of the cyclops submarine seen in Subnautica. It was designed to be assembled as a kit, however since I have very limited experience with making printed parts fit, some glue could be required (I used some for several…
Want to access even more models not found here? Interested in supporting my efforts making free models for the world to enjoy? Check out my patreon page here: https://www.patreon.com/mz4250 Patrons have access to all my files in one…
Creality K1 & K1 Max Universal Build Plate Alignment Stops This will allow you to use just about any build plate you like with your K1, K1 Max along with other Creality printers that use this same setup. Here is a video explaining how it…
Thumbstick Tops for Odin 2. Top is the same size as Joycon tops. All parts are meant to be friction fit, use glue at your own risk. 4 Thumbstick styles 1 Height Adjuster for use with stock top Printed on A1 Mini. The smaller the layer…
A collection of 34 snowflakes with hanging loops for decoration purposes, with a silhouette design. The same snowflakes without hanging loops are here . More 5 cm designs ↑ Link: 34 Snowflake collection ↑ Link: 34 Snowflake collection ↑…
He holds stuff! Either paint or add in color switches to get the black, I like the aesthetic of simple sharpie. No Supports needed, just snip off the small supports in the hands.
Masterful Dungeons Props are designed as part of the fully modular Masterful Dungeons system built for tabletop RPGs like D&D and other TTRPGs. These props are standalone pieces , intended to be placed freely on top of the floor tiles or…
A new keychain comes from the JURASSIC ERA! ENJOY! FOR COMMERCIAL USE STL file Articulated Triceratops - Commercial Use (3MF)・3D print model to download・Cults (cults3d.com) -- PRINTING PROBLEMS -- I know how frustrating it can be to have…
