Search results: overlay

Sort order

162 models

Terminator Hitch Hook Overlay. Nakładka na hak Terminator Hitch

Nakładka na hak o kuli średnicy 50 mm. Nakładka jest blokowana zapięciem z gwintem dokręcanym kluczem w zestawie. Gdyby wygięcie haka było zbyt ostre, należy skrócić klucz, by móc dokręcić zacisk. Hook cover with a ball diameter of 50 mm.…

Print approx. €19.87–€24.28 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
265
Likes
22
Rating
5
P
PrintablesValleyGeek

Tiny Epic Galaxies board game player mat overlay - Thinner

This is a basic remix of the wonderful Tiny Epic Galaxies board game player mat overlay by Sherri making the back piece thinner to better fit the whole set within the original game box along with some other printed organizers. I removed…

Print approx. €1.61–€1.97 excl. taxPreliminary estimate for one variant

Downloads
135
Likes
25
Rating
3
P
Printablesjtkone

Mage Wars Arena player board grid overlay

This is overlay for mage wars arena player board to keep wooden cubes in place in the heat of the game. I used just some leftover PETG, 0,2mm Quality as print setting - print top resting on print plate to avoid any needs for supports.…

Print approx. €1.89–€2.31 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
81
Likes
4
Rating
5
P

Car Costume/Overlay for Ozobot Eve - polsh car "ŻUK"

This is a car overlay/costume for Ozobot eve. It measures 7.2cm x 4.8cm x 4.6cm. this is the Polish equivalent of PRL track: "ŻUK"

Print approx. €6.24–€7.63 excl. taxPreliminary estimate for one variant

Downloads
56
Likes
19
Rating
0
P
PrintablesDr Operator

Minecraft light switch overlay

A co-worker of mine showed me a listing of one of these on Etsy and asked if I could make it for him. I said sure but I had a couple of concerns. First, the plate itself was made to replace your existing light switch plate and I'm not…

Downloads
3,143
Likes
739
Rating
5
P
PrintablesLP

Terraforming Mars - Player Mat Overlay

Remix of https://www.thingiverse.com/thing:2988374 with a hole to send energy to heat. I al;so attached the sheet I printed that was provided as a comment on the original edition. For the grids, you have to use the one from the original…

Downloads
1,120
Likes
50
Rating
4.33
P
Printablespastasauce

Button Overlay for Behringer X-Touch universal control surface with XR32 / XR32 & XLive

Overlay for the Behringer X-Touch universal control surface when used with the XR32 or XR32 rack mixer. The overlay is used to label the X-Touch buttons with their proper names when using the X-Touch with the Behringer XR32 mixer and…

Downloads
1,062
Likes
31
Rating
5
P
Printableskap42

Azul Overlay

This overlay for Azul's player board keeps the tiles in place. It covers all of the board and stretches over the edge of the board to keep it in place. There are two versions, one divided into several parts for small printers and one…

Downloads
965
Likes
220
Rating
5
P
PrintablesJacques Botha

Azul Overlay

Could not find a overlay to fit my printer. (Or that fitted properly) This overlay is 233mm x 233mm (Prints perfect on Creality CR-6 SE) There are 4 clips. The overlays fit inside the box. Print Settings Printer Brand: Creality Rafts: No…

Downloads
861
Likes
81
Rating
4.71
P
PrintablesNR

Frosthaven display organizer and storage for overlay tiles

Overview The model is meant for storage and organization of Frosthaven's overlay tiles. The organizer replaces one of the stock inserts that come in the box. The value of the organizer is that each set of overlay tiles is displayed in its…

Downloads
733
Likes
55
Rating
5
P
PrintablesG Viv

X-Touch XR18 Overlay

Overlay for the Behringer X-Touch universal control surface when used with the XR18 or X18 or MR18 mixers. The overlay is used to label the X-Touch buttons with their proper names when using the X-Touch with the Behringer XR18 or X18 or…

Downloads
579
Likes
14
Rating
0
P
PrintablesAvatarRubix

Frosthaven AoE Overlays

Frosthaven included AoE abilities with complicated shapes that can be difficult to line up by eye. So I made these simple overlays that cover all non-trivially-shaped AoE abilities amongst three of the starter classes up to level 9. The…

Downloads
569
Likes
58
Rating
4.75
P
Printablesgexgecko

Azul boardgame board overlay tile slots and score keeping peg

This is a remix of https://www.thingiverse.com/thing:4159549 by Thomaswt However, I have combined the score and main tile sections into a single piece, and have shaved off the edges so it can be printed on a single 220mmx220mm bed (unlike…

Downloads
507
Likes
87
Rating
5
P
PrintablesKniephaus

Oathsworn Dashboard with Overlay Insert Remix

I really liked both of these designs and wanted to combine them so that you could still slot cards underneath the player board and while also using as little filament as possible. I don't really know true 3d modeling design but I do know…

Downloads
352
Likes
24
Rating
5
P
PrintablesKarnEdge

Terraforming Mars Turmoil Committee Overlay

An overlay for the Terraforming Mars Turmoil expansion Terraforming Committee Board. Original turmoil delegates can fit in the chairs. The lobby is slightly tight but delegates will fit. Policy cards fit in perfectly as well. This design…

Downloads
333
Likes
40
Rating
5
P
PrintablesQualith

Terraforming Mars Colonies overlay with backplate

This is a overlay for the moon tiles in Terraforming Mars - Colonies expansion to get them fully enclosed.

Downloads
310
Likes
29
Rating
5
P
Printablescdalheim

Terraforming Mars Player Mat Overlay

Introducing a single-piece Terraforming Mars Player Mat overlay, printable in one piece on a Prusa Mini! Given that the Terraforming Mars Player Mat is larger than the printable area on the Prusa Mini, most existing player mats are either…

Downloads
307
Likes
10
Rating
0
P
Printablestornadotexan

Space Base Lipped Player Board Overlay

There were a few Space Base player board overlays available but I didn't really see a good solution to keeping them in place. Figured I could use it as an opportunity to learn some 3D modeling. Separated the original file into three…

Downloads
300
Likes
28
Rating
5
P
PrintablesRobagon3D

Terrain Overlay Tiles For Gloomhaven

This is a texture test for terrain tiles for Gloomhaven. Feel free to remix. Inspired by rbross and nestyr's tile sets. I still need to print these to make sure the texture dimensions are correct. Some of the cracks and land separations…

Downloads
299
Likes
58
Rating
5
P
PrintablesSherri

Tiny Epic Galaxies board game player mat overlay

I created this print because the popular board game, “Tiny Epic Galaxies” player mat/playing pieces have a very low friction coefficient. During game play it is common for the pieces to slide from their proper position into an adjacent…

Downloads
290
Likes
62
Rating
5
P
PrintablesLiron Levy

The white castle player board overlay

This is a remix of the overlay made by Stoniac. I have adjusted it a bit so it will not block the last Daimyo token. Category: Other

Downloads
275
Likes
32
Rating
5
P
Printablespacorn

Brandon Sanderson's Mistborn Deckbuilding Game - Mission Card Overlays

Overlays for the Mission Cards from Brandon Sanderson's Mistborn Deckbuilding game. It is very easy for the markers to get knocked around or off the cards. This overlay makes distinct slots for the markers to sit in, making it more…

Downloads
271
Likes
35
Rating
5
P
PrintablesN3TZW3RG

Castles of Burgundy Special Edition Fixed Duchy Overlay

This duchy grid is meant to replace the grid included in the castles of burgundy special edition by awaken realms. The semi-transparent grid is not aligned correctly with the hex spaces (as seen on the comparison image), which really bugs…

Downloads
261
Likes
42
Rating
5
P
Printablesfatpretzel

Improved Azul Overlay Board and Insert

I really liked Jacques Botha's Azul overlay , but I didn't want to glue clips to my overlay. I have a large format printer so I had plenty of room to make an overlay that fit over the entire board. The overlay is 242mm x 242mm so it…

Downloads
256
Likes
21
Rating
0
P
PrintablesMscottie

Pirates of Maracaibo player and island boards overlays

UPDATE 11/6/2024 - Added island board overlays These are overlays designed to fit the player boards and three island boards (Emerald, Gold, and Pearl) for the game Pirates of Maracaibo . These are designed to fit snugly over the boards to…

Downloads
256
Likes
14
Rating
0
P
PrintablesOndra

Mini Rogue - player card overlay

Introducing the Mini Rogue 3D second layer! 🎲🔥 Behold, a meticulously crafted 3D model designed for the Mini Rogue board game. Elevate your gameplay with this innovative creation that seamlessly integrates with player cards, providing a…

Downloads
254
Likes
15
Rating
5
P
PrintablesDr Operator

Bleeding light switch overlay

An easy to install overlay for your light switch. The Dual light switch model I used as a template to make the overlay was 130mm wide but the light switch in my home is 117mm wide so I've included both sizes.

Downloads
248
Likes
137
Rating
5
P
Printablesgexgecko

Azul boardgame LASERCUT overlay tile slots and score keeping peg

This is a remix of my Azul overlay, but for a laser cutter instead. It uses the same 3D printed pawn as the original, and 2 new small identical 3D printed clips to fasten it to the board. The clips are sized for 3mm plywood and 2.25mm…

Downloads
227
Likes
19
Rating
0
P
Printablescrackers567

Arcs Board Game Player Board Overlay

Definitely not necessary, but it's nice to have when you bump the table. I had to cut it to fit on a Prusa Mk3 but the dovetails work pretty well. The boards still fit side-by-side in the box. It printed pretty well in both PLA and PETG.…

Downloads
215
Likes
28
Rating
3
P
PrintablesThomaswt

Azul gameboard overlay

I was tired of the bricks sliding if someone hit the table or the game board by mistake, so I wanted an overlay to hold the bricks. None of the others I found suited my needs, so I created my own. They can be used individually or 3 all…

Downloads
213
Likes
30
Rating
0
P
PrintablesKniephaus

Revive Tribe Board Overlay

I looked everywhere for an overlay for these tribe boards for Revive but the only one I could find was on Etsy with a designer who was unwilling to sell the .stl, opting instead to only sell an over priced physical print.. So, I decided I…

Downloads
212
Likes
24
Rating
0
P
PrintablesPandaruExpress

Terraforming Mars: Ares Expedition Player Board Overlay (Larger)

This is an extensive remix/modification of sl4ppy's Terraforming Mars playerboard overlay. Size has been increased by a few mm to fit the larger playerboards that are apparently shipping from Target now (Version I have). Also adjusted…

Downloads
205
Likes
27
Rating
4.75
P
PrintablesDUKK

Minecraft light switch overlay for double switches

The model named Plate will need supports. Both of the switch pieces need to be printed twice. (untested)

Downloads
203
Likes
29
Rating
5
P
Printablespjft

Mini Rogue Overlays

I saw some really nice Mini Rogue mats with actual holes to place the pieces. I tried to create overlays to the Dungeon and Player mat. It's my first 3D model, so bear with me, but it's functional enough for me so I thought I'd share with…

Downloads
199
Likes
12
Rating
5
P
PrintablesHappy.D

Euthia Player Board Overlay

Hi everyone, i created Player Board Overlay for Euthia. It is also split in 2 pieces so that it fits smaller print area like on my Ender 3V2. For the health marker, i will probably create some other solution (easier to print and more…

Downloads
179
Likes
10
Rating
5
P
PrintablesCDN_Printing

Wonderland's War Player Board Overlay v2.0

Designed a better overlay using 3mm acrylic that I cut on my CNC, used a 0 flute bit designed for plastics and it cut much better. Overlay is a bit shorter so I could get 2 player boards out of 1 sheet of 12"x12" acrylic. The 3D printed…

Downloads
177
Likes
14
Rating
0
P
PrintablesTarz

Azul Gameboard Overlay for Smaller Print Beds

his is a remix of guiosca's simple gameboard overlay which I found excellent for its simplicity, speed of printing, and ability to print on a smaller format print bed. The changes are small. I increased the thickness 0.3mm to provide a…

Downloads
173
Likes
21
Rating
5
P
PrintablesTzarph

Merchants & Marauders overlay

This is a small collection of player aiding overlays etc. for the board game Merchants & Marauders. First and foremost is the overlay for the ship hit locations, which I found was very difficult to keep in place on the player board. I…

Downloads
171
Likes
8
Rating
0
P
Printablesbumyong

Ikea Kvissle Overlay for 25mm bases

This overlay is to keep all of your 25mm base models in neat order on your Ikea Kvissle paper tray that you are using to hold your minis. Print two of these and you can opt to put in 6x3 mm magnets to hold it down on the tray (not really…

Downloads
169
Likes
18
Rating
0
P
Printablesveng1

RailCore Bed and Texture(Overlay) for PrusaSlicer

The stl is used for the bed model in PrusaSlicer.and is installed int the Printer Settings tab, Bed Shape Model dialog. Load the stl .file Normally the stls are in the PrusaSlicer\resources\models. The Overlay or what Prusa calls Texture…

Downloads
167
Likes
4
Rating
0
P
PrintablesBen

Space Base Overlay Remix

Nothing changed except the male connection point. Slightly modified with a fillet and a slightly thinner connection area to fit better into the female connection point. Category: Toy & Game Accessories

Downloads
166
Likes
9
Rating
0
P
Printablesgabindu

X-Wing 2.0/2.5 TMG base overlays (for casual play, HotAC, FGA, etc.)

These overlays are meant to replace the cardboard inserts (small, medium, and large) for the miniature bases in the X-Wing miniatures game (originally by FFG, now by AMG), especially for co-op scenario campaigns like Heroes of the Aturi…

Downloads
163
Likes
13
Rating
0
P
PrintablesBroeke

Korg Electribe 2 pad overlay

Just print and groove on!

Downloads
161
Likes
9
Rating
0
P
Printableswroediger

Frosthaven Overlay Tile Storage

Mismatching Tile Slots My copy of Frosthaven (first printing 2022) has two differently-cut versions of the Debris token (see last photo). One fit the original organizer but the others did not. Thus, I've adjusted the slot to fit both. I…

Downloads
150
Likes
9
Rating
0
P
PrintablesVirtuallyJason

Frosthaven Overlay: Pine Tree

I made this Pine Tree to be used in place of the Frosthaven 3-hex overlay, but it'll work in any sort of TTRPG as well! To give it some more utility, I made the canopy and the trunk as separate parts. When aligned properly, the canopy can…

Downloads
150
Likes
21
Rating
0
P
PrintablesMoosketair

Terraforming Mars - Player Mat Overlay multi-color printer

03/09/2023 : fix color of "0" on the energy line

Downloads
149
Likes
12
Rating
3
P
PrintablesMike F

Wonderland's War Acrylic Overlays for Laser Cutting

Acrylic overlays for Wonderland's War player boards. There are two options for you: A - For a simple, single-layer overlay, just laser cut the “WW Overlay.dxf” file and rest it on top of your player board. If you know you're not going to…

Downloads
148
Likes
14
Rating
0
P
PrintablesTomDD

ZX Spectrum Keyboard Overlay for 48k Rubber Key Model

Simple keyboard overlay for the 48k rubber key model. I had some of these back in the day and they are useful for adding labels above keys for simulation games (Elite, Gunship etc...) or business software with lots of keys. Two versions…

Downloads
146
Likes
11
Rating
0
P
Printableskap42

Azul Overlay

This is an overlay for Azul's player board that keeps the tiles in place. It covers all of the board and stretches over the edge of the board to keep it in place. There are two versions, one divided into several parts for small printers…

Downloads
140
Likes
19
Rating
0
P
Printablesn1ck

Azul Overlay - fits smaller build surface

First of all, thanks to jacquesuk for creating this overlay, it looks and works great! This is a remix of the original design fitting a smaller build surface than 233x233mm. This is achieved by splitting the piece and adding dovetail…

Downloads
138
Likes
13
Rating
5
P
PrintablesVirtuallyJason

Frosthaven Overlay: Large Ice Crystal

I made this model to represent the Large Ice Crystal in Frosthaven! I tried to keep the general look of the cardboard overlay tile of a single large central crystal sprouting from a collection of smaller crystals, while also leaving…

Downloads
134
Likes
29
Rating
0
P
PrintablesKalcemo

Azul Master Chocolatier Overlay

Overlay for the Azul : Master Chocolatier board game. I could not find an overlay that fit the slightly different location of the chits. The pictures are printed with Polyterra Earth Brown on a PEO sheet at Bambu Labs X1C standard 0.2mm…

Downloads
134
Likes
14
Rating
0
P
PrintablesRichard D

Overlays for Andromeda's Edge

A player board overlay for Andromeda's Edge. 3mm thick. Two variations - one with modules on the left, the other with them on the right (unfortunately you can't just flip the overlay to the other side). Sized for a 250mm bed printer

Downloads
133
Likes
14
Rating
4.5
P
PrintablesWheart

Remix of Terraforming Mars Turmoil Committee Overlay

If printed as a whole part, supports on the bed are required. It may be cut at 2mm height to separate riser and top part as in original model.

Downloads
130
Likes
13
Rating
5

Decorative overlay on the extruder Ender 3 V3 KE

Decorative overlay on the front of the extruder, air intake. Wanted to make my printer look a little more fun. It is attached to glue🙃. Maybe not completely successful, I will be glad if someone suggests changes. I also wanted to make…

Downloads
125
Likes
14
Rating
0
P
Printablesschleprocker

Blood Rage Board Game Player Mat Overlay

A solution to another problem that doesn't exist, because I own a 3d printer! Blood Rage Player mat overlays, attached with tiny pieces of poster putty. For a more simple solution, just use a tiny dot of poster putty on the tokens instead…

Downloads
121
Likes
13
Rating
0
P
PrintablesVirtuallyJason

Frosthaven Overlay: Control Console

Here's a model that I made for the Control Console overlay for Frosthaven! The game comes with 4 of these pieces (unless I've lost one somehow!). They're nice and easy prints with no supports required. As always, the .blend file and…

Downloads
117
Likes
15
Rating
0
P
PrintablesImburr

Brass Birmingham Coal & Iron Market Overlay

I was tired of having the coal and iron cubes unorganized and sloppy in the marketplace of Brass Birmingham. There are a few box insert prints which have lids which hold cubes, but they didn't work for me. So I designed this from scratch.…

Downloads
116
Likes
8
Rating
0

MTG Creature Token Overlay LONG D20 FIX

I fixed the card spot for the long file to actually fit a standard token card. I also made it more symmetric.

Downloads
116
Likes
25
Rating
5
P
PrintablesOzziemandias

Tuya/Moes radiator actuator battery flap overlay

[PL] Moja interpretacja (remix) nakładki na klapkę baterii do popularnych głowic termostatycznych Tuya/Moes. Model został wykonany od podstaw, metodą prób i błędów dobrałem idealną średnicę wewnętrzną i kształt wycięcia na przyciski.…

Downloads
112
Likes
8
Rating
0
P
PrintablesRicky

Russian Keyboard "Overlay"

An "overlay" of a Russian keyboard for anyone that needs it but doesn't have a Russian style keyboard. I am learning Russian using online resources and it was very hard to use a standard keyboard for the task since I still haven't…

Downloads
107
Likes
10
Rating
0
P
Printablesstuckpixel

Noise Engineering Versio Overlays

Noise engineering is one of my favorite companies in the Eurorack space - and now that I have a versio module, I wanted to be able to quickly use the various flashable modes without having to refer back to a manual/screenshot all the…

Downloads
106
Likes
10
Rating
0
P
PrintablesMscottie

Unconscious Mind insights boards overlays and client/dream card organizers

UPDATE Feb 10, 2025 I have added an overlay for the cracked insight dial. Both insight dials (normal and cracked) plus their corresponding overlays still fit in my remix of js500's player trays. (Barely!) I printed these using BambuLab…

Downloads
105
Likes
13
Rating
0
P
Printablestdcsf

Wingspan Americas Overlay Clips

Small clips (2.2 mm wide, with 0.6 mm sides) to secure the player mat overlays. Print in the illustrated orientation. Added curved versions to match the board corners. Print as shown in the second image

Downloads
103
Likes
10
Rating
5
P
Printablesslamajak

Terraforming Mars: Turmoil - Overlay for Fan Made Boards

Terraforming Committee overlay for Terraforming Mars Fan Made Boards by Arnd Drifte I am a huge fan of Terraforming Mars and we got awesome fan-made boards from Arnd Drifte ( you can find the awesome boards here ). Huge thanks for his…

Downloads
98
Likes
12
Rating
5
P
Printablesprzemo_m

engine block Ził 157 overlay brush motor class 540, scale 1/10

engine block Ził 157 overlay brush motor class 540, scale 1/10 Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: Yes Resolution: 0,2 Infill: 20 Filament: Dosen't matter HT PLA doesn't matter Notes: engine block…

Downloads
96
Likes
17
Rating
0
P

Car Costume/Overlay for Ozobot Eve

his is a car overlay/costume for Ozobot Eve. It measures 7,2cm x 3,9cm x 3,5cm. It is the Polish equivalent of the small-capacity car of the PRL "Fiat 126p" You sholud print it with supports.

Downloads
94
Likes
13
Rating
0
P
Printablesgabindu

Star Trek Attack Wing / Alliance AI base overlay

This base overlay shows the arcs needed for the AI system introduced by Star Trek Alliance Dominion War Campaign , and can be used to turn any ship into an AI ship. (Please ignore the image showing a base ship card from a different…

Downloads
85
Likes
7
Rating
0
P
PrintablesJacob

Terraforming Mars Playmat Overlay and Backer

This is a remix of two models made by two different makers; combining what I feel are the best parts of both of their designs. If, because of under-extrusion, it is a little loose than desired, shim it, tape it, or add a bit of superglue…

Downloads
80
Likes
5
Rating
0
P
Printablesjguluarte

Slay the Spire Enemy HP Overlay

Why make another enemy HP tracker? When I get a game…I always check to see what I can print to make it better, or as a box insert, or certain utilities that make playing the game more enjoyable. I didn't really like the other options that…

Downloads
80
Likes
10
Rating
5
P
PrintablesVirtuallyJason

Frosthaven Overlay: Metal Cabinets

Here's a model that I made for the Frosthaven Metal Cabinet overlay! There are four such tokens in the game, so I'd recommend printing out all four of them, especially because they're nice and easy to print with no support required! Not…

Downloads
70
Likes
10
Rating
0
P
PrintablesKickbut101

Terraforming Mars - Colonies Expansion - Planet Overlay

Still a bit of a work in progress, but overlay that should snugly fit around the planet ovals for the TM Colonies expansion. Print one first to see if sizing fits, and adjust accordingly by a percent up or down as needed.

Downloads
69
Likes
5
Rating
5
P
Printableswinkja

The Wolves (Vlci) overlay

Hello all, There are too many elements on the wolf board and any movement of the table can ruin the game by throwing components around. That's why I created this overlay for the Czech version of wolves (the text boxes are placed according…

Downloads
68
Likes
12
Rating
5
P
Printablesfxtpdx

Hasselblad 500CM CFV50c Framing Overlay

SImple framing guide for Hasselblad 500CM cameras with a CFV50c digital back, without the appropriate focus screen.

Downloads
63
Likes
7
Rating
0
P
Printablesschleprocker

Cthulhu Wars Player Overlay

Overlay for Cthulhu Wars player mats. The included figure is tiny and the track is miniscule. A friend of mine requested these to improve visibility across the table and mostly for kicks. I included a frame to hold spell book tiles and…

Downloads
63
Likes
11
Rating
0

Terraforming Mars Player Mat Overlay by @cdalheim_461019 STL

Exact same as Exact same as this model https://www.printables.com/model/585630-terraforming-mars-player-mat-overlay/collections but with stl file whereas original model link only has gcode

Downloads
59
Likes
2
Rating
0
P
Printablestonybruce

Frosthaven Snowflake White Winds Overlay

The Snowflake class in Frosthaven has a card called White Winds with an attack ability shape that is difficult to clearly apply to maps. I decided to make an overlay template to make this task easier. One end of the chain is used to…

Downloads
58
Likes
2
Rating
0
P
PrintablesLee J Jones

Modified [Choose] Overlay Tiles Split Up Version, Snap-Together

For smaller print beds, layer 2 of the Frosthaven Insert by Leon_H. This is a snap-together version (avoids glue).

Downloads
57
Likes
3
Rating
0
P
PrintablesRichard D

Board overlay grid for Captain Flip

A small overlay for the ship boards, designed to hold the tiles that are in Super Rookie's excellent tile enclosures. You will need to download Super Rookie's tile enclosures and print 72 copies, as well as five copies of this board…

Downloads
57
Likes
7
Rating
0
P

Overlay Cover for CMF Phone 2 Pro

Elevate your CMF Phone 2 Pro's aesthetic with this meticulously crafted layered decorative underlay. Designed to fit seamlessly beneath the official silicone case, this accessory adds a personalized touch without compromising the phone's…

Downloads
55
Likes
26
Rating
0
P
PrintablesFrankenduke

Frosthaven - Overlay Tile Markers

After finally making to Frosthaven I was kinda of annoyed at how hard it was to tell the different types of terrain apart. It's been a problem for years with the other Havens tbh. JotL it was less so because the notes printed on the page.…

Downloads
54
Likes
7
Rating
0
P
PrintablesHuy Nguyen

Azul Board Overlay - for more recent releases

I recently purchased Azul and was sad to find that all the Azul overlays found on Printables did not fit this newer board. The squares were off by a few millimeters. I remixed the original overlay specifically to fit my board and only for…

Downloads
53
Likes
10
Rating
0
P
PrintablesSnowPig

Mtg Overlay padlock for Room cards

The size fits half the card as you can see in the photos, I'm going to make it smaller to only blocks the art and not the text itself. I didn't design the padlock itself ,or it was ai I don't remember..

Downloads
51
Likes
8
Rating
0
P
Printablesslamajak

Dominance Marker for Terraforming Mars: Turmoil Overlay

Dominance marker for the overlay (available here ) of Terraforming Committee from Terraforming Mars: Turmoil. The overlay is a custom fit for a fan-made boards, see the overlay description. The model has not been printed yet, I am waiting…

Downloads
51
Likes
1
Rating
5
P
PrintablesIvanov design

Clip for threshold overlay Land Rover Range Rover L322

I couldn't find where to buy broken threshold clips, so I tried to make them - they hold up great. Petg, infill 100%.

Downloads
50
Likes
2
Rating
0
P
PrintablesLilMikey

RGB LED Frame (w/ Cyberpunk Overlay)

Given the excitement around Cyberpunk I wanted to add some related flair to my case. This design is pretty simple. It's a 'tray' in which to mount ws2812b LED strips and a press-fit 'frame' to stand the tray up vertically. The tray serves…

Downloads
47
Likes
32
Rating
0
P
PrintablesMscottie

Unconscious Mind player box remix to fit insights boards overlays and client/dream card organizers

This is a remix of the player box from js500's brilliant Unconscious Mind insert to fit my insights boards overlays and client/dream card organizers . (Be sure to print the “_thin” variants of my models to be compatible with this remix.)

Downloads
46
Likes
7
Rating
0
P
PrintablesPteppic

MTG Effect Overlays

These are overlay tokens for the various effects of MTG-cards. The looks are based on the 2012 MTG game (PC), others are free interpretations. Not all effects or conditions are represented (yet); for some reason only the ones matching my…

Downloads
43
Likes
18
Rating
0
P
Printablesd_a_n_t_e_s

Castles of Burgundy Split Overlay

The Castles of Burgundy special edition tiles overlay, split in half for easier printing.

Downloads
42
Likes
10
Rating
0
P
PrintablesStonemull

TTP229 Keyboard overlay

Found its a bit tricky to touch the tiny pads on the TTP229 without mashing adjacent ones so knocked up this little overlay to help. Might make some different ones yet. Added the rsdoc for designspark mechanical if you want to edit it,…

Downloads
41
Likes
6
Rating
0
P
Printables3D LEE

Space Base overlay magnet connector

A space base overlay with magnet connectors. I used 4x1mm circle magnets. Everyone loves the click of the magnets to put the overlay together. I also printed a clip that holds the overlay well. I glue the two pieces one for each side.…

Downloads
38
Likes
6
Rating
0
P
PrintablesVirtuallyJason

Frosthaven Overlay: Power Conduit

I made a model to use for the Power Conduit overlay! There are 6 of these in the box. They're difficult terrain, so I worked really hard to find a way to give a single power conduit (as depicted in the official artwork) a “flat” top layer…

Downloads
36
Likes
1
Rating
0
P
PrintablesVirtuallyJason

Frosthaven Overlay: Glowing Orb

Here's a model for the Glowing Orb! I was a little lost for how to make this anything more than just a sphere, but I eventually settled on a wrought iron stand for the sphere. In the end, it's actually a pretty easy print, with only three…

Downloads
36
Likes
7
Rating
0
P
PrintablesVirtuallyJason

Frosthaven Overlay: Ice Pillar

I made this model to be used for the Ice Pillar Overlay Tokens in Frosthaven! It's a nice easy print, which is good because you'll need 9 of them ;) As always, the .blend file and pre-supported .3mf (including the one that I used to print…

Downloads
34
Likes
4
Rating
0

Decorative overlay on the screw

When it is necessary to disguise the screw, different methods are used. I offer an overlay on a screw head

Downloads
34
Likes
7
Rating
0
P
Printablesmark

X-Touch XR18 / MR18 - OSIMIDI Stage Overlay

X-Touch XR18 / MR18 - OSIMIDI Stage Overlay for use with OSIMidi Stage. I didnt want to use the stickers that you print off with the software, so edited the blank version of the original. This is set up so you can use your X touch via…

Downloads
32
Likes
1
Rating
0
P
PrintablesVirtuallyJason

Frosthaven Wooden Stairs Overlay

I made some wooden stairs to use for the Frosthaven overlay! Of course, I wanted them to be useful for more than just Frosthaven, so I made them to fit inside a standard 1 inch square for TTRPGs like D&D and Pathfinder. I also made a…

Downloads
32
Likes
9
Rating
0
P
Printableskrecik
Downloads
32
Likes
8
Rating
0
P
PrintablesJanek

Starfield overlay for Apple Watch 44

Good for photos, but not so good to wear as daily. I have to figure how to make it stable.

Downloads
32
Likes
15
Rating
0
P
PrintablesBadspot

Intellivision Overlay Box

For best results print vertically, with bottom facing the back of the build plate. Seam Position: Back Enable "Make overhangs printable." if you can. Works nicely with my Intellivision game storage shelf.

Downloads
31
Likes
3
Rating
0