Frosthaven Overlay: Power Conduit
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Here's my model for the Frosthaven Overy, the Power Conduit!
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 35
- Makes
- 0
- Views
- 103
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Props & Terrains
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I made a model to use for the Power Conduit overlay! There are 6 of these in the box. They're difficult terrain, so I worked really hard to find a way to give a single power conduit (as depicted in the official artwork) a “flat” top layer that models can balance on. It takes a little bit of careful placement to get a model on there, but once you get it in the right spot it's fairly stable. I included some “cheat” geometry in this guy to make it not require any supports to print; it also keeps it stable when in use and is small enough to be very inconspicuous.
As always, the .blend file and pre-supported .3mf (including the one that I used to print this on my Prusa MK3, although the support points should work for SLA printers) for this model are available to my patrons at https://patreon.com/VirtuallyJason. If you appreciate my work and have a few dollars to spare each month, please consider joining!