Reduction overlock Spool - Singer
Reducer for use of large spools on Singer machines. Supplement with 1.5mm diameter wire.
Print approx. €3.91–€4.78 excl. taxPreliminary estimate for one variant
- Downloads
- 211
- Likes
- 67
- Rating
- 0
46 models
Reducer for use of large spools on Singer machines. Supplement with 1.5mm diameter wire.
Print approx. €3.91–€4.78 excl. taxPreliminary estimate for one variant
If you like this model, please consider supporting me over my profile. Choose your variant of this overlock sewing aid (2 mm or 3 mm thickness). It prints in PETG with supports. It is an alternative to the closed source model…
This container is designed to catch the fabric which was cutted off. It fits the W6 454D Overlock. Just open the flap and put the nose on the side of the container into the opening. After closing the flap the container is secured on the…
Needed a needle box for the bigger overlock machine needles as illustrated. It will hold 10 of them. Off course the smaller ones will fit as well. Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: No Resolution:…
I reorganized my sewing space and wanted something to organize the thread cones I use wth my overlock and coverlock machines, so I designed these trays for the Ikea Skadis peg board. The hooks are based on GP's Skadis Hook .
Using the overlock spools makes sewing much cheaper a less annoying. So enjoy the adapter and never get out of your thread during long work :-)
Reinforced skadis mounted overlock spool holder in X1, X2 and X4 configuration. Easy to print. PLA is fine
Its a holder for two overlock sewing thread spools to attach them to an IKEA SKADIS pegboard. The distance between those two hooks is about 60mm. They are 130mm long.
Zwei Varianten um Overlockgarn auf einer Haushaltsnähmaschine zu verwenden. Der “Pfaff_Spulenhalter_kl” ist optimal für die Spulen von: Toldi-LocK sowie verschiedene Noname Garne. Der “Pfaff_Spulenhalter2” ist optimal für die Spulen von:…
Sewing machine adapter for the much cheaper spools of thread intended for overlock machines. Category: Hobby
This is a Skadis holder for overlock yarn reels. It works with the universal hook from CSD_Salzburg: https://www.thingiverse.com/thing:2853257
Ein Behälter für Nähreste für eine Gritzner 788 Overlockmaschine. Jedoch 20 mm breiter als der originale! Die angebrachten support Stützen kann man schön mit einem Seitenschneider entfernen. A container for sewing waste for a Gritzner 788…
Abfallbehälter für die Overlock von Brother 1034DX
A friend of mine wanted a system for her thread spools on a IKEA Skadis toolsystem. Designed in Shapr3D and Printed in Prusament PLA with 20% infill and 0.4mm layerhight on a Prusa XL - Single
And another adapter for overlock thread spools. Slim adapter that remains in the spool. This allows the large spools to be used directly on a household sewing machine.
Printed from PLA, welding wire used as an arm.
The person I printed it for said it fits. Maybe it is a little to narrow. Leave a comment if you have an idea on how to improve it :) Update: Model v1 is seen on the photos. If you feel lucky you can try v2 which incorporated feedback…
Our overlocker needed a new light bulb. Changing the bulb turned out to be difficult, needing a tool that the maker sells (see the last photo). With no dealer nearby, and the weekend already here so mail order would take too long, I…
Very simple overlock spool organizer. Print it and stick it down with some double sided tape inside the drawer. Prevents the spools from tipping over. Tested with spools from various manufacturers.
This adapter has been created to prevent Overlock yarn spools from wiggling around and eventually falling off when using them on regular sewing machines. Overlock Yarn Spool Bottom Diameter: 33mm Top Diameter: 25,5mm Spool Height: 123,5mm…
You can use it for your Gridfinity system to organize your big spools. It‘s printed in two different parts (baseplate and 4 pins) so you can insert the pins into the baseplates. Advantage: if one breaks you just have to print a new pin…
This is a replacement for the Brother Serger overlock thread guide bar. Added additional height to the model over the original Brother part for increased strength. This was printed from PLA with 15% infill; 6 outer layers were used…
This file contains a custom design by @CJPrints for a waste bin specifically for the Brother 3034D overlocker, featuring key modifications for enhanced functionality. The front base has been tapered to ensure a snug fit. Additionally, a…
Overlocker spools are much cheaper than standard sewing spools for the same length, so I designed a holder to easily use them on my sewing machine. My machine has a coil holder slot with a 6mm hexagonal recessed hole (between two parallel…
Odpadní přihrádka pro overlock Brother 760D. Container for Brother Overlock 760D.
stackable box for 40x70mm overlock yarn spools Print Settings Printer Brand: Creality Printer: Ender 5 Rafts: No Supports: Yes Resolution: .2 Filament: eSun PLA white Notes: supports "on build plate only" required, bcs of many retracts…
I made this for the textile workshop at Stockholm Makerspace , to get a better organization of the large (5000m) cones of threads for the overlock/serger sewing machines.
This holds 4 overlock spools. The measurements of the spools are available in the pictures, so you can check if your spools fit. I had different ones, that required different holders. I printed it in both PLA and PETG and printed great in…
Spool adaptor to fit serger/ overlock spools on 7mm spool shafts Print Settings Printer Brand: Prusa Printer: Prusa Mk2 Rafts: No Supports: No Resolution: .35mm Infill: 20% Category: Parts
No support needed :)
I designed a new engine casing/bearing holder. for this very old sewing machine are no replacement parts available and the plastics is very brittle… Printed in Prusament pc-blend; PET-G should also work.. The bearing is now a pressfit.…
After buying a serger for my wife, i ordered also some thread spools. Some of them were bigger so they don't fit in the built-in holder. So i created this holder, using a piece of pine board, 4 M6x80mm screws as axles for the spool…
My mom's overlocker had this piece (which holds the thread bar up), and it broke. This worked as a replacement. I recommend you support it if printing in resin, as the bar channels might otherwise fill up. I drilled a small hole through…
Dies ist ein Ikea Skadis Halter für die Overlock Nähgarnspulen. Gedruckt mit PLA. 20% (15% gehen ebenfalls). Stützen werden nicht benötigt. Passt bei mir Perfekt. Meine Frau ist davon begeistert. Viel Spaß damit. This is a Ikea Skadis…
dle originálního dílu jsem pomocí obměřením vymodeloval tento adaptér na overlock přidal jsem soubory s názvem vylepšený - mírně zvětšený středový otvor a upravený vnitřek i celkový tvar. Dle mne druhá verze ač ne dle originálu lépe…
The complete part is out of order, I modeled a similar one. I hope this will save you time))
for spools with inner top diameter of >16mm and bottom >36mm Tested only on Zetina 2312 (equivalent to PFAFF Hobbymatic 801/807…) where it spins nicely
Serger- Brother Overlock thread tree fix. Use existing broken tree and stem screw. Fasten bracket to metal stem. Then use screws or hot glue gun to bracket. Holes must be pre drilled in plastic thread holder. Holes are 2.5mm.
A unique 3D printable creation — this Serger Cone Thread Holder Stand, Overlock Sewing, Holds Large Spools Upright Tested on 8+ FDM printers. Download and print immediately. **What's Included:** - STL File - 3MF File - OBJ File - Print…
Just a spoolcap for Merrylock overlocker
printed from ABS at 100% infill with 6 walls
As title, girlfriends machine broke the Lever (just old I guess). This is designed for use without the steel insert and will slot right onto the shaft. Bit of a squeeze to get past the covers, but easily do-able. Needs to be printed…
Dies ist ein Ikea Skadis Halter für die Overlock Nähgarnspulen. Gedruckt mit PLA. 20% (15% gehen ebenfalls). Stützen werden nicht benötigt. Passt bei mir Perfekt. Meine Frau ist davon begeistert. Viel Spaß damit. This is a Ikea Skadis…
A unique 3D printable creation — this Serger Cone Thread Holder Stand, Overlock Sewing, Holds Large Spools Upright Tested on 8+ FDM printers. Download and print immediately. **What's Included:** - STL File - 3MF File - OBJ File - Print…