Leopard 2A4 Panzer/Tank
2D version of the Austrian tank Leopard 2A4
Print approx. €1.21–€1.48 excl. taxPreliminary estimate for PETGSource material: PET
- Downloads
- 221
- Likes
- 25
- Rating
- 5
186 models
2D version of the Austrian tank Leopard 2A4
Print approx. €1.21–€1.48 excl. taxPreliminary estimate for PETGSource material: PET
The minis These are small combat vehicles (mainly tanks) that are designed to be printed on a FDM machine. These models were made to be printed easily on cheap machines with a .4 nozzles. All models were tested on a cheap 2yr-old and…
Modeled in Fusion 360. Based on Tiger 131 at the Bovington Tank Museum. 2 versions of the tank are provided, one with the feifel air filter system attached, and one without them. The Tiger I was a German heavy tank of World War II that…
Remix of the amazing Maus easy print model by WindhamGraves on Thingiverse. I realigned the barrel with the turret and separated it for more reliable and cleaner printing upright without supports. Also cleaned up some geometry. The…
Chceck also other models https://www.printables.com/@Jerryie/collections/2044634 . Easy to assemble. -Two colors -organic support -0.15 layer height
Version 2 of my Panzer VI Tiger 1 design. I know it's really popular, so I decided to remake it. It has even more details, and is better proportioned. I remade the treads and the wheels. It's scaled 1:42 this time. The turret rotates and…
can be printed together the model needs to be glued together or separately in other colours the VI Tiger tank is very realistic Print in place kit card , Assembly required need to use a support the cabin can be rotated 360 degrees
Tiny Tank – Tiger i 1:200 scale model Easy to assemble – the turret clicks onto the hull and can rotate. Just glue the tracks and the theback part to the main body. To scale a model from 1:200 to 1:144, you need to use a scaling factor of…
Easy to assemble. -Two colors -organic support -0.15 layer height
1/16 RC VK-16.02 Leopard. Always check the latest version on https://github.com/edumardo/VK-16.02-Leopard you can follow the model development and construction on the following forums: Topic on RCTankWarfare forum (english). Hilo en el…
I noticed my model of the Tiger 1 I uploaded was the Tiger 1 H, not the Tiger 1 E, so I made the Tiger 1 E. This version has treads on the turret, and a new cupola. Some other small changes were made. The Tiger I was a German heavy tank…
Scale: about 1/45.5 Some parts need supports Printed using Bambu Matte PLA Do take note the tracks in the picture are the low details version. The cannon and martlet assembly can be changed for other cannons made for the Panzer 4s.…
Easy to assemble. -Two colors -organic support -0.15 layer height
Tiny Tank – Panzerkampfwagen IV 1:200 scale model Easy to assemble – the turret clicks onto the hull and can rotate. Just glue the tracks and back part to the main body. Comes in three versions: Ausf. F Ausf. G Ausf. J o scale a model…
Tiny Tank – Panzerkampfwagen V Panther 1:200 scale model Easy to assemble – the turret clicks onto the hull and can rotate. Just glue the tracks and back part to the main body. Comes in three versions: Ausf. A Ausf. G JagdPanther To scale…
I decided to re-do my design of the Tiger 1 E, this time to an Early variant. I re-did the road wheels and added tracks on the front. The classic cupola is added, along with the feifel filters and the smoke launchers. Small changes…
Scale: about 1/45.5 Some parts need supports Printed using Bambu Matte PLA Do take note the tracks in the picture are the low details version. The cannon and martlet assembly can be changed for other cannons made for the Panzer 4s.…
Come support these models over on Patreon Buy my time, Not my models. Easy to print Panzer IV, 1/100 scale, will want some greebling if scaled up. Some details have been changed for looks/ printability. Scale by 1.56 for gaslands /…
Scale: about 1/45.5 Some parts need supports Printed using Bambu Matte PLA Do take note the tracks in the picture are the low details version. The cannon and martlet assembly can be changed for other cannons made for the Panzer 4s.…
Behold the Panzer IV G, the most common made German tank in WWII. Also now a printable miniature that you can proliferate into a grand army of your own! This version however, has updated detail, better tracks, and it's just a better model…
I printed it with my Anycubic Kobra GO with black PLA. Next month I will upload a version of the leopard2a7 with less details. There are two versions. The version “leopard2a7cut” is diveded into two pieces so that you can print it larger…
The Panzer IV Ausf. G was a mid-war variant of the Panzer IV, developed by Germany during World War II. Introduced in 1942, the Ausf. G marked a significant improvement in firepower by mounting the long-barreled 7.5 cm KwK 40 L/43 (and…
Geetech PLA Matte Grau Bambu Lab X1C Mit Supports
Scale: about 1/45.5 Some parts need supports Printed using Bambu Matte PLA Do take note the hull is a reuse of the Panzer 4 H, I ran out of filament to print another set. the cannons are 4 cut black filaments and there is one connecting…
Scale: about 1/45.5 Some parts need supports Printed using Bambu Matte PLA Do take note the tracks in the picture are the low details version. The cannon and martlet assembly can be changed for other cannons made for the Panzer 4s.…
Geetech PLA Matte Grau BambuLab X1C Mit Supports
Panzer III Tank Model Scale: 1:72 The Panzer III was one of Germany's primary medium tanks during the early years of World War II. Designed to engage enemy armored vehicles, it served on multiple fronts and formed the backbone of German…
Discord for updates: https://discord.gg/yfdSb Do take note the tracks in the picture are the low details version. The cannon and martlet assembly can be changed for other cannons made for the Panzer 4 Some parts need supports Printed…
Panzer II Ausf. L Luchs Tank Model Scale: 1:72 The Panzer II Ausf. L "Luchs" (Lynx) was a German reconnaissance tank used during World War II. Designed for scouting missions, it combined high speed, good cross-country mobility, and…
Behold the Panzer IV G, the most common made German tank in WWII. Also now a printable miniature that you can proliferate into a grand army of your own! Printing Printing may be a little tricky, but if you use organic supports you should…
Created two files, one is pre-supported and the other isn't. They are both Resin Friendly and sized at 28mm.
I created a two fictional or alternative types of models of Panzerjäger Tiger (P) Ferdinand (Sd.Kfz.184) mit Krupp Maus II Turm mit 150 mm Kampfwagenkanone KwK 44 L38 in size - scale 1:100 for model makers to the dioramats or like a model…
Panzer III with side skirts, 1/100 scale. Use v2 (has better reinforced side skirts)
This is part of our Kolossale Kampfpanzer project! Subscribe to our Patreon or Tribe for better value. There is also a 30% discount on STL files and 15% on physical copies for all Patrons and Tribers!…
LEGO Panzerwagen Sd kfz 247
The model is intended for display, dioramas, and historical projects . It’s suitable for 3D printing and works well as a decorative piece for collectors or WWII-themed scenes. This is a static model only , made for visual and educational…
Do as u please. If you want to 3D print it pls edit to your liking. layers and details heights are 0.01 in height. change if you wish to 3D print with FDM printers
Do as u please. If you want to 3D print it pls edit to your liking. layers and details heights are 0.01 in height. change if you wish to 3D print with FDM printers
As per normal those who are keen on making ur on ones, the files are free and for those who wants to 3D print them but if u cant print them, im selling 1 for $5 SGD, shipping depend on where u are ( u may need to get alot of them for it…
I had the idea to make blueprints of different vehicles I can print with my Sovol SV04 in dual color mode. This Tiger tank is my first model following this idea. i hope many more will come ;) If you want to do it with two extruders like I…
I wanted to build a servo-driven tank but, couldn't find one with a working suspension. I designed this off of a Panzer III, and it has a pretty realistic suspension. This was started on my Monoprice Select Mini, hence the size. Video…
Pattern choose between HEX will interlock every 60° ORTH will interlock every 90° for tablets or phones to fix vertical or horizontal
Thanks to the original creators Greg191134 and techoutreach for their work. This model and is based on techoutreach's version with a few tweaks. Like techoutreach's version, you can change the hotend without removing the BMG extruder.…
This is a simple remix of the cover from the original PanzerObserver2.4 camera mount. Check out the original design to see if it's what you need instead. I purchased this camera and it didn't need the extra hole that the original cover…
Scale: about 1/45.5 Some parts need supports Printed using Bambu Matte PLA Do take note the hull is a reuse of the Panzer 4 H, I ran out of filament to print another set. The cannon is 1 cut black filaments and there is one connecting the…
Printed using ESun PLA+ Dark Brown and Black Tank itself needs supports print it where the top is facing upwards Super glue is required as well Raw un-melted filament for the gun Made for keychain and desktop display Discord for updates:…
wolfenstein robot dog figure supports needed! printed with 0,2 layer
It Moves the gun, that's pretty much it… 11/19/2024 Updated the turret, now its raised for better rotation
Replica of the german tank Panzer VIII with rotable turret
Jagdpanzer IV Tank Destroyer Model Scale: 1:72 The Jagdpanzer IV was a German tank destroyer used during World War II, known for its low profile, sloped armor, and powerful anti-tank gun. Built for defensive and ambush combat, it became…
The fusion file is provided would you want to adjust the tolerances, see how it's done or simply edit the model easily. Printing Information: All parts can print regularly except the german cross which requires a filament swap (it is too…
Ce modèle est basé sur un fichier trouvé il y a longtemps sur Printables ou Thingiverse. Je n’ai malheureusement pas retrouvé la source originale. Si vous reconnaissez l’auteur, merci de me le signaler pour que je puisse créditer…
This is a remixed version of M. Bergman's very nice Panzer II Luchs tank model. In order to more easily print it on my Mk4, I split the model into several pieces, and arranged them in a way that I thought appropriate. I also re-scaled it…
A 1/100 scale model of a German WWII railcar from an armored train. These cars were used as the second car in the train. It would push an empty flatcar ahead of it to set off mines and it would be followed by a special car carrying a…
My model of an Rheinmetall KF 51. Printed in black PLA Note: Scale 100%
This seems so simple. (1) Thats because it is simplified (2) Because this was tourcher to make, its harder to make than it seems. This was I project I started after I saw a Maus here on printables, so I said "I want to try it myself, how…
This is our Kolossale Kampfpanzer project, subscribe to our Patreon or Tribe for better value! There is a 30% discount on STL files and 15% on physical copies for all Patrons and Tribers! patreon.com/dakkadakkastore…
inspiré de ce model sur Thingiverse, Panther auf A, auf D & auf G -1/50ème, de Alainkif
Modell des neuen Schützenpanzers SPz Puma der Deutschen Bundeswehr Maßstab ca. 1/72 habe einen Körper für FDM-Drucker hinzugefügt, der zwar funktioniert, aber immer noch nicht fehlerfrei ist (siehe Bilder von meiner Herstellung, gedruckt…
its still a work in progress it should work with a 21mm PVC pipe and a 12g CO2 gas canister which is often used in airsoft guns. I'm not sure how effective it will be, but its just a fun project.
Kerberos Panzer Cop riot shield from the anime Jin Roh for custom 1:12 scale 6 inch and 1:6 scale 12 inch figures plus 1:1 scale for cosplay. I may do more Kerberos stuff in future as I gradually tick projects off my to make list. I also…
/!\, seul les panzerfaust à plusieurs sont a la bonne échelle lego, celui tout seul est à mettre à la bonne échelle.
double armoured chain - last link is open to clip together
Panzer IV track for rc tank in 1:10 scale
I scaled up the gun to make it easier to print. Not to scale, but the original tiny gun is very difficult to print. I added a bushing for the turret and separated the tracks to enable a separate print. The entire file is scaled to 1/72.
dérivé de ce model sur Thingiverse: Easy Print SDKFz 251, de Markopolo
Hello everyone, I have vectorised a technical drawing of the Leopard 2 tank and made it printable with a 0.4 nozzle. IMPORTANT: The illustration is very detailed, so slicing can take up to 10-15 minutes! Please note the settings in the…
Hello everyone, I have vectorised a technical drawing of the Leopard 2 tank and made it printable with a 0.4 nozzle. IMPORTANT: The illustration is very detailed, so slicing can take up to 5-10 minutes! Please note the settings in the…
GERMAN WWII TANK IN 1:35 SCALE - PANZER III MODEL IS FULLY PRINTABLE AND NEED GLUE TO ASSEMBLY Manual:
A 1/100 scale model of a German WWII railcar from an armored train. These cars were used as the second car in the train. It would push an empty flatcar ahead of it to set off mines and it would be followed by a special car carrying a…
This is to make cookies in a shape of the Panzerkampfwagen VI Tiger. You cut it with the main-cutter and after that you stamp it with the contour details. And then you bake it. Panzer Hurra! Print Settings Printer Brand: Prusa Printer:…
This is a Model for the M48A2 Räumpanzer Tank
Printed using ESun PLA+ Grey and Black Most parts needs supports (Both Tree and Standard) Super glue is required as well Raw un-melted filament for the gun movement Did some experimentations regarding the tracks and integration of…
The Jagdpanzer E 100 is a rolling nightmare of steel and fire, an unstoppable executioner built to crush anything foolish enough to stand before it. Its colossal armor shrugs off incoming shells like rain, while its monstrous gun delivers…
The Commander Bust Historical Accuracy: Features a classic WWII German Tank Commander in a mid-action pose, wearing a detailed field tunic and side cap. Optimized Fit: Specifically scaled as a waist-up bust to sit at the correct height…
This is a great case minus the sold sheet of glass on the front that completely blocks any kind of airflow. I've created a front panel replacement that is the exact same size and shape as the glass, but has large perforated holes to allow…
Brummbär SdKfz 166 bylo německé útočné dělo užívané za druhé světové války.
💖 Support Me If you like this model and want to use it for commercial purposes, you can support me on Patreon and get a commercial license: https://www.patreon.com/cw/MonsieurPierre Small but mighty, this chunky green tank rolls in at…
@naehenderpilot hat bei Instagram diesen Halter designed für seinen Lasercutter. Ich habe eine Stl für den 3D Drucker daraus gebaut. Dies ist die erste Version, Verbesserungen kommen ggf über die Zeit.
This is just a different slice of excelent 300zxcolin work with some problems fixed. Can be printable without support (or very few). I ran model trough cura 3.3 betas "make overhang printable" feature so some parts are a bit different,…
A tool to help you properly align and install the safety tempered glass from Panzerglass on the Samsung Galaxy A54 5g smart phone. Easy to 3D print and install (see the attached images). When installing glass, firstly put on the tool and…
Für den Panzer Contest 2024 auf MakerWorld. Druck bei 100 % Füllung mit einer Schichtdicke von 0,08 mm und einer Grundschicht von 0,16 mm. Das Modell ist 160x160 mm groß. Sie können mit höheren Schichthöhen unterhalb der minimalen Tiefe…
Panzer III ausf L code 235 of the 2nd SS Panzer Division Das Reich In March of 1942, a study was conducted to assess whether the turret of the PzKpfw IV could be fitted onto the superstructure of the Pz Kpfw III. After analysis, it was…
I made the "Achtung Panzer" sign seen in War Thunder. To make connecting them look better, print with an inner brim
For gantry mounted OV5640 Camera on Voron 2.4. It offsets the camera under the gantry so it won't be blocked by the X axis
Couldn't find one so I made one. Hope this helps someone else! I recommend PETG for strength... those metal mags get heavy! Remixed from https://www.thingiverse.com/thing:4810168 - Original model by captaINstraiTJacket Category: Sport &…
Německý těžký stíhač tanků, který vznikl na podvozku německého tanku PzKpfw IV.
Militärisches Symbol zur Verwendung in Ausbildung/ Befehlsausgabe Aussparung unten für optionalen Magneten zum ankleben
Militärisches Symbol zur Verwendung in Ausbildung/ Befehlsausgabe Aussparung unten für optionalen Magneten zum ankleben