40 models
This is a battery powered, rechargeable, Raspberry pi based RCM payload for the Nintendo Switch. The enclosure is made so that it can be battery powered and recharged with a built in USB micro b port. The payload can be injected into the…
Start your own drone delivery service and deliver cargo/payloads with your DJI Mini 2 , DJI Mini SE , or Mavic Mini ! Everything is fully 3D printable without supports, you just need some string or a wire. Both the mount and the landing…
3D-printable servo-based bomb drop mechanism designed for use with SG90 micro servos. This system is engineered for quick-release action without the need for screws — just insert and twist to lock your servo in place! Tool-free servo…
Dropping mechanism designed to release a payload from an RC aircraft using a servo motor
Early development prototypes of 84mm payload modules designed for the Simple 3D-Printed Water Rocket Launcher project circa 2023. Siloed from main project and here mainly for historical interest. Designs for 0.5L Polar Seltzer bottles are…
Clip that fits on DJI Mini 3 drone to allow attachment of string to airlift objects with your DJI Mini 3. Does not interfere with the folding/storage of the drone while installed.
I recommend using PETG, some low flex TPU (95A, 98A) or any kind of PLA that is a bit more heat resistant (PLA+, PLA HT). Use 3 walls, 10-30% infill, layer height between 0.15 to 0.25 mm aprox
I needed a minimal light weight add-on to carry payloads. I suspend my package under the drone with light weight nanobraid fishing line. This clip snaps onto the bottom of the drone exactly at the center of gravity. It has a 4mm smooth…
Introduction: This mod blocks the vision positioning system (VPS). Keep this in mind, and you may want to disable VPS I personally have not had any problems. Please be safe with this project. Never fly the drone directly over people or…
I designed this super light weight payload holder for the Mini 4K to carry loads suspended with two lines to keep the payload from twisting. I printed with PETG 100% infill, 3 perimeters. It snaps in place at the center of gravity. I have…
I took this original idea for a ping pong ball carrier and remodeled it to be easier to modular and easier to print. Print the clip and attach to the Tello. Then attach either the box or the bowl. Use Tello's 8D flip capability to drop…
Overview Modular payload drop system designed for RC drones and planes. This setup allows you to release small objects remotely using a simple servo mechanism. --- Features - Lightweight design - Modular setup (single or dual payload) -…
Introduction Welcome! Here you will find STL files for all 27 of the officially published payload volumes available for all 11 active American orbital launch systems, based on the following published sources: SLS: Space Launch System…
This payload drop mechanism attaches to https://www.printables.com/model/1400517-rak-19003-case-for-dji-mini-3-and-4-pro-with-hinge . Check the instructions on…
The Payload Skid is a modular frame for the BlueROV2 with mounting points for additional watertight enclosures and lights. Using the Payload Skid, you can add additional large instruments and other equipment to your BlueROV2 . Fitting…
Printed in TPU - No support needed - Brim advised Drop from ~ 200 feet+ in order to reach terminal velocity and produce sound Fits an 11mm steel bearing for proper nose weight DO NOT use these with the intent to harm others or property! I…
This is a servo-actuated payload release mechanism designed for UAV/drone applications. The system uses a high-torque servo motor to control a hook-based locking mechanism for controlled payload dropping. The structure is designed to…
Eflite Payload release hinge and missiles all files are here feel free to create and design your own missiles with the release mech, just please add to makes if you make something or remix
Additional instructions can be found on our forum: https://forum.zubax.com/t/magmavic-magnetic-payload-attachment-for-dji-mavic-3/2580
S.A.F.E. – Sensor Array For Environment (Unitree GO2) Modular Raspberry Pi 5 payload for the Unitree GO2 robot. Designed for environmental sensing and easy hardware integration. Sensor Integration HC-SR04 Ultrasonic: Front-mounted for…
The pin is pulled in and out of the Release Mechanism housing payload attachment point by any thin wire witch is attached to the end of the servo horn. The servo is placed inside its housing and the cover can be screwed on with any screw…
A practically fully 3D printed rocket designed for Estes F15-6 motors for my university telemetry project. The rocket includes a payload bay with a custom telemetry sled that can easily be modified for whatever electronics you'd like to…
You need also landing extenders from: www.printables.com/model/138052-dji-mini-2-light-landing-extenders-propeller-blade
Rocket made to lift payloads. payload Examples: This is an altitude data logger I made I even made little holes in the cone to make sure to have the same pressure from the outside. I do not recommend doing this if you're new to coding,…
A payload that was developed for the CAN-SBX project as part of a university team (McMaster Advanced Space Systems). The Canadian Stratospheric Balloon Experiment Design Challenge (CAN-SBX) involves proposing an experiment to be done with…
Additional and replacement parts for the Mach1 Rocketry BT50 Black Brant fiberglass model rocket kit. The files include a BT50 3 fin jig specifically designed for the Black Brant and a conic nose cone with a payload bay for the FireFly…
Want to deliver supplies or parts via your Teal drone? This is handy 3d-printable payload adaptor has a little over 15 cubic inches of payload capacity. Just replace the stock Teal Sport cover plate with this adaptor, put the stock lid on…
Remixed with a cargo loop and soft tpu feet
This sign can be used to show people how much weight something can hold before it brakes or cracks,... You wil need 4 M3 X 16mm screws to bolt it on to something.
bottom frame mount for customizable payloads. m3 socket head cap screws required
When printing remember to print in vase mode if you do not want the internal filling!
The payload adapter is connected to the avionics bay using two 2M nylon screws and nuts. The adapter provides a pathway for the sensor wiring from the avionics bay to the conduit connection. The top of the conduit fairing has been…
Additional and replacement parts for the Mach1 Rocketry BT55 Saberhawk fiberglass model rocket kit. The files include a BT55 3 fin jig specifically designed for the Saberhawkt and a payload bay designed for custom PCBs but can also hold a…
Note: Remember that adding things to your drone will result in shorter flight time and affect stability. No warranties or assurances are included with this design, implied or otherwise. Use this system at your own risk! For commercial…
This is an Bolt-on for my: So that it's very easy to strap on parachutes. I used an 10mm ribbon witch I cut down to the required 6mm and then I looped the ribbon around and glued it to itself. The length of the ribbon is dependant on the…
Between the 2022-23 and 2023-24 school years, students at Millburn High School were given the opportunity to work hands on with the Spot robot dog, courtesy of Boston Dynamics. This Payload, among other things, was the final draft of that…
i print with really hight temp to make gap between layer melt together thus make it strong but 1/3 off my print will fail because that name on the buttom just screw up Category: R/C Vehicles
These are the official CC BY-NC-SA 4.0 open-source STLs for the AeroTherm autonomous radiometric thermal UAV project by NasonNation Robotics. Mounting standard aerospace compute hardware to an FPV frame requires rigorous vibration…
Overview Modular payload drop system designed for RC drones and planes. This setup allows you to release small objects remotely using a simple servo mechanism. --- Features - Lightweight design - Modular setup (single or dual payload) -…
Between the 2022-23 and 2023-24 school years, students at Millburn High School were given the opportunity to work hands on with the Spot robot dog, courtesy of Boston Dynamics. This Payload, among other things, was the final draft of that…
