The source marked this model as adult content.
Print approx. €5.36–€6.55 excl. taxPreliminary estimate for one variant
- Downloads
- 710
- Likes
- 459
- Rating
- 5
744 models
The source marked this model as adult content.
Print approx. €5.36–€6.55 excl. taxPreliminary estimate for one variant
Print Tested with PLA. Print instructions I recommend 15% to set the fill. Supports need to be generated on the printer bed.
Print approx. €0.28–€0.35 excl. taxPreliminary estimate for one variant
Print No supports needed. Tested with PLA. Print instructions I recommend 10% to set the fill. BookMark dimensions are approx. 25 x 60 x 9 mm.
Print approx. €0.21–€0.26 excl. taxPreliminary estimate for one variant
A great benchmark tool once you've got a million Benchys floating around. Experiment with different settings to get a good, clean print. Polymaker has published some suggested setting changes here . The recommended settings below are…
Print approx. €0.84–€1.03 excl. taxPreliminary estimate for one variant
A spearhead for costumes. I made it for my son. It can be mounted on a small broomstick using a saw, a few 4mm screws, and/or some rope. For better printability and durability, the spearhead is divided into two parts. The parts can be…
Print approx. €2.25–€2.76 excl. taxPreliminary estimate for one variant
This is a dispenser of little things like candies for your lovely kids, pearls for your lovely wife or pills for your lovely grandmother :-) Just lift the lid and be surprised about what this heart will spend you! Watch a short video clip…
Print approx. €11.26–€13.77 excl. taxPreliminary estimate for one variant
Deutsches EU-Kennzeichen Lang und Einzeilig mit Spasstext “MEINE PERLE” (= my pearl) More of my license number plates: https://www.printables.com/model/1200241-kfz-kennzeichen-sample-german-eu-number-plate-einz…
Print approx. €1.74–€2.13 excl. taxPreliminary estimate for PETGSource material: PET
it is used to attract fish by throwing it into the water, it will flow while reflecting light which creates flashes imitating an injured fish or other. It is mainly used to attract predators. It must be covered with aluminum or adhesive…
Print approx. €1.72–€2.10 excl. taxPreliminary estimate for PETGSource material: PET
“Perlen-Flaschen” Organisierer zum Tragen
Print approx. €1.49–€1.82 excl. taxPreliminary estimate for one variant
This collapsing Spear is designed to be printed as one part. The Replaceable Blade Version is available to my Clubs members. Supports are not required, for best results use a .4mm nozzle. Find detailed instructions on how to print…
Update 2024-04-26 I updated part A1 to fit better to A2. Print instructions I used Prusament PLA Galaxy Black at 0.1mm layer height with gyroid infill. List of Parts Glue: https://amzn.to/4aoDkRE Step 1 Parts needed: A2, M1, M2, M3, Y1…
Introducing the inspiring 3D model of the "Inverted Spear of Heaven," the legendary weapon wielded by the formidable warrior Toji Fushiguru. Crafted with unparalleled attention to detail, this digital masterpiece brings to life every…
This is a printable model of the Black Pearl. I do not reccomend printing it with fdm printers under 150 percent scale, while possible, it will make the supports next to impossible to get off the railings. Also when you print them, build…
This is the Pear-fect Pass Through Fidget for all the pear lovers in your life 🍐 I designed two styles: a pear with a closed bottom and a pear with an open bottom for the core to pass all the way through.:) 3D PRINT SETTINGS Layer Height…
32mm scale Goblin miniature for tabletop gaming. Tips, donations or patronage is greatly appreciated ❤️
Easy to print roller for forming perfectly round pearls for making jewelry, decorations or for children. Ideally suited for use with polymer clay. But also suitable for fondant or children's modeling clay. In 100% size, the Christmas tree…
A frogman. Somebody forgot to drain the swamp and now it strikes back with pointy sticks. Suitable for 28mm tabletop games. Created so that it does not need any supports and prints well on a cheap FDM 3d printer like the Ender 3. NOTE…
Want to access even more models not found here ? Interested in supporting my efforts making free models for the world to enjoy? Check out my patreon page here: https://www.patreon.com/mz4250 or support me on Printables Clubs! Patrons have…
Easy to print roller for forming perfectly round pearls for making jewelry, decorations or for children. Ideally suited for use with polymer clay. But also suitable for fondant or children's modeling clay. In 100% size, the Snowman has a…
A hobgoblin or any other big goblinoid with a pole weapon. Suitable for 28mm tabletop games. Created so that it does not need any supports and prints well on a cheap FDM 3d printer like the Ender 3. There are variants with square and…
Elite Saracen Spearman. Suitable for 28mm tabletop games. Created so that it does not need any supports and prints well on a cheap FDM 3d printer like the Ender 3. There are variants with square and round bases. NOTE The mounted spearman…
It is oft required for the Legions of Rome to deploy their hastati and Principe in a rapid platform that can also lay down substansial fire support. Enter the Kimera Armoured Transport. Equipped with a hull mounted auto grenade launched,…
I make this model in three parts. I plan on using a broom handle for the handle of the prop, so I used the diameter of one I had on hand. There is a tab on the head and neck of the model that will help with aligning it right. I hope to…
Orc looter with spear Suitable for 28mm tabletop games. Created so that it does not need any supports and prints well on a cheap FDM 3d printer like the Ender 3. There are variants with square and round bases. NOTE The orc shaman seen in…
A hobgoblin or any other big goblinoid with a pole weapon. Suitable for 28mm tabletop games. Created so that it does not need any supports and prints well on a cheap FDM 3d printer like the Ender 3. There are variants with square and…
I've been selling this on Esty for a bit now, and if you cant be bothered to buy 5 filaments for more than the sword, you can do so, but if you want to buy it for a fairly reasonable price (stand included) its about £25.…
A bandit with spear. Could be a soldier, too. Or a mercenary. Or a deserter. Suitable for 28mm tabletop games. Created so that it does not need any supports and prints well on a cheap FDM 3d printer like the Ender 3. There are variants…
a spear for dummy 13 it is about 6 inches long the handle is from dummy 13 staff the spearhead is my own design
Description : The Inverted Spear of Heaven is a dagger with a jitte-shaped blade. It has a «q» shaped circular hand guard that points out on the side of the longer blade. Additionally, the weapon has a black handle with a circular link at…
Magic Disappearing Coin Box! Inspired by a toy I loved as a kid, this clever box hides your coin with a simple slide. It’s perfect for surprising friends, showing off a cool trick, or just having some fun. Easy to print and put together,…
Should fit most broom threads, maybe plungers as well. Test file included. Print upright no supports. Bed slingers might want a brim.
Easy to print roller for forming perfectly round pearls for making jewelry, decorations or for children. Ideally suited for use with polymer clay. But also suitable for fondant or children's modeling clay. In 100% size, the Spheres are…
Heyho Here I have various beads that you can use to make necklaces, bracelets or other decorations :) Scalability I used a 1mm thread. Theoretically, however, threads up to a thickness of 1.6 mm should also fit well. The larger the…
Magic Coin Disappearing Trick for 1 euro cent Print files coin1+coin3 then print file coin2 with pause and insert coin3 inside. Total time: 40min+30min - 0.3 Layer Fusion360 file added
"It is my solemn and important duty to bring happiness , light , and joy into your world when you're being a dour idiot." - Sylphrena, from Oathbringer, by Brandon Sanderson I based this model on the Dragonsteel “Forged Foam” models to…
I repaired the model with 3d builder as the model had impurities, and i also split the model in half with also flag separate for easier print and glue with blender. Next up is to make sails thick enough for a common 0.4mm nozzle to be…
This is a digital 3D printable model of Mandalorian Beskar Spear . The download contains pieces of the model ready to be 3D printed on a 200 mm print bed (STL) and files that are not cut into smaller pieces (OBJ). All cut parts are placed…
Mortal Kombat X's (2015) version of Scorpion's spear/kunai.
This 3D-printed spear is expertly designed to fit perfectly into the hand of your Dummy 13 figure, adding a powerful and dynamic element to your collection. The spear’s precise scaling ensures a secure grip, making it ideal for action…
An old file from my Pepakura making days that I discovered in Pepakura Designer you can export to .OBJ and in "Windows 10 3DBuilder or 123Design" export to .STL. Unfortunately I don't have the skills yet to improve further on the model,…
This Shakespeare globe theatre was initially made as an English assignment. I made it in Blender and also made some renders with it. Ironically, this was made nearly a year ago, but I finally got around to uploading it. :) Here's a small…
A designful pot inspired by the structure of gothic cone spears. Perfect for your medieval house plants! Print information: Recommended vasemode or semi-vasemode settings (0% infill, 0 top layers, 4 or 5 bottom layers, 2 or 3 outer…
This is a pretend play pear for things like classroom kitchens and playrooms. 3MF included. Non commercial use only. Filament used- Polymaker Polylite Pro PLA in Green and Brown Original design by Noah Juniel
Want to access even more models not found here ? Interested in supporting my efforts making free models for the world to enjoy? Check out my patreon page here: https://www.patreon.com/mz4250 or support me on Printables Clubs! Patrons have…
Jujitsu Kaisen Inverted Spear Of Heaven. Print And Assemble Easily
I basically made this for pulling cables behind walls or above ceilings (original ethernet plug was from Dead End - Ethernet protector by SarahAlroe). You can stick a wire or piece of string through the loop and pull it through, hopefully…
This is my take on how the LEGO Group would create a Spear element! If you end up printing this, I would recommend that you print the Spear upright on the build plate for the best print quality.
Part of a FREE 3D-printable miniatures project you can find at https://www.patreon.com/DungeonWardenMiniatures Your support is vital to the survival of this project. Thank you :) FDM-compatible (the smaller the nozzle, the better the…
Pissed off with another cleaning of spilled silicone gel balls - I quickly made a funnel for filling containers. Two versions - one printed straight, the other in vase mode. The normal version takes a little over 20 minutes to print but…
I DO NOT technically own the rights to the original character (ming and disappering guy in this case), but this time I created the design of the mesh myself. I ENCOURAGE buying the official stuff from the website here:…
I threw this together rather quickly, so it's not great.
This is a sculpture of an ancient Greek soldier holding a shield and wielding a spear. Made to be dynamic and eye catching. Would look nice on a desktop or as shelving decor. Printed solid but can be hollowed. Printed with supports and…
Part of a FREE 3D-printable miniatures project you can find at https://www.patreon.com/DungeonWardenMiniatures Your support is vital to the survival of this project. Thank you :) FDM-compatible (the smaller the nozzle, the better the…
Against all odds, Pearl found her way into Belle's and Sam's hardened hearts thanks to her disarmingly warm nature. Besides, who can resist chocolate cookies?
This model is compatible with the lego system.
Designed this up after rewatching Jujutsu Kaisen, takes a 1/2 in dowl through it. split for easier painting/printing. Category: Props
Every color has a different height so if you're crazy enough and have enough colors of filament you can do a color change 6 times on the last layers as seen on the screenshot. (I'm not crazy enough lmao) Use 0.2 or 0.1 layer height. Enjoy!
This is a model of a device that may or may not have seen used in medieval times. The main shaft can be printed as one piece or in two halves that are then glued together with help from the locator holes that accept 1.75mm filament. I…
Toji Fushiguro's Inverted Spear of Heaven for the Dummy 13 Model Scaled to a standard D13 Model (100%). Prints in two parts. No supports needed. All my other Dummy 13 models can be found here .
A middle-eastern spearman from the Scorpio clan. Suitable for 28mm tabletop games. Created so that it does not need any supports and prints well on a cheap FDM 3d printer like the Ender 3. There are variants with square and round bases.…
TO ANYONE WHO DOWNLOADED THE MODEL BEFORE THIS EDIT, THERE WAS AN ERROR IN SOME PARTS, SO MAKE SURE TO REDOWNLOAD THEM, IT IS 100% FIXED. (very late ago, like two months ago) ANOTHER ISSUE HAD OCCURED, I SOMEHOW DIDN'T EXPORT TWO OF THE…
Designed this up after watching Jujutsu Kaisen, takes a 1/2 in dowl through it. split for easier painting/printing. Category: Props
Scanned with my DIY 3D Scanner and processed in MVE, for more details on the scanning process and the (printable) 3D Scanner see: https://www.thingiverse.com/thing:2755968 Finally, there is a website, where I will bundle all the…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
Bambu Lab Bambulab AMS Dryer Trockner Silicia Pearls
UPDATE: I made a version that supports an aluminum rod! This version uses a ½" aluminum rod that is 56" long. I recommend taking a 6ft aluminum rod and cutting it down. The parts are all assembled the same way as the original with the…
A model based on a Pearl Philharmonic snare drum. It's not a real drum.
Detailed Greek solider holding a spear. Set to be printed solid, but can be hollowed. Supports are advisable. Enjoy... Note: Take a little extra time ensuring supports are in place (I'd suggest manually adding a few) around the right arm…
Modeled myself from the offical setting informations. I found out the original design, one site of the knife should be broked, so modeled my version of this knife. Arround 40cm total lengh, revised the handle for better holding feeling.
Modeled this up for fun. takes a few pieces of 1/2 in dowel. will probably need gluing and sanding. Measures a total of 20 inches long and is split up, also has a removable mag and ammo. Category: Props
The easy-to-print spooky pear-shaped pumpkin is a versatile 3D printable model perfect for Halloween. Its unique design adds a touch of playful spookiness to your decor. Customize it with accessories like a witch's hat, leafy stem, or…
This is a model that I made for a ≈16mm dowel for cosplaying. It looks somewhat historically accurate in my opinion and I hope you enjoy it. (note tip is sharp and might break off so be careful)
Looking for a viking spear, but not wanting to deal with glue or non-printed wood poles? Search no further :) All elements printed with 20% infill and no supports. Using a raft to print the spear tip may also be helpful. Tighten each of…
This enchanting 3D mermaid model features a graceful sea princess sitting on a soft cushion inside a seashell. With flowing red hair, a purple shell bikini, and a shimmering turquoise tail, she brings fantasy to life. Perfect as a…
When Ogg (my YouTube caveman muppet ) dresses to impress, he feels naked without his trusty spear at his side. But where is a caveman awakened in the modern world going to find a spear? He's going to 3D print one, of course. But he's also…
This model is compatible with the lego system.
A points tracker for Age of Sigmar Spearhead. Points broken down into victory points and battle tactics. Fits 16mm dice. Printed with Polymaker marble PLA with ironing.
statue of Athena, goddess of wisdom with spear and shield
Included 3mf file for print orientation. Either add dowels with your slicer or use some super glue too attach the base. Or just use the figure scaled way up for wall art. If you're happy with the design, and had a successful print, AND…
The two "halves" of the wheel, as well as the two pieces of the pedestal can be adhered using a small amount of CA glue.
With this magical box, you'll be able to make small objects appear or disappear! A prop ready for use by the youngest magicians ;)
Recovered from the Lendbreen icepatch southern Norway in 1974, this spear was so well preserved that it's discoverer, Per Dagsgard of Norway, was able to use its shaft as a walking stick! Believed to date all the way back to the 8th…
Part of a FREE 3D-printable miniatures project you can find at https://www.patreon.com/DungeonWardenMiniatures Your support is vital to the survival of this project. Thank you :) FDM-compatible (the smaller the nozzle, the better the…
A friend of mine wanted a spear for a Percy Jackson cosplay, however, all the files were either the wrong design, or actual weapons, and would never pass weapons check. I designed this to be to the best of my ability to pass weapon check…
ASW-G-08 Gundam Barbatos Mace Spear This is a cosplay model of the Gundam Barbatos spear mace thingy from season 1. I tried to model this full scale but that made no sense in terms of making it actually usable in terms of a cosplay…
This is a reupload of a beautiful model from Thingyverse. Created by graph . --- Small lamp > big impact! This Voronoi Pearl Light Lamp is a beautiful decoration and lamp. Through the voronoi-parts, the light casts a beautiful light and…
A 3d model of Leonidas' Spear from the Assassin's Creed series.
Pear cable holder The most powerful cable holder ever.
Inspired by round ‘rose’ cathedral windows, this clothing button contains a puck of imitation mother of pearl made by printing silk PLA on a glass bed with a hilbert curve as the first layer fill pattern. This was then coloured with…
This model is compatible with the lego system.
My contribution to the “Pearls” competition I have adapted one of my designs for a pipe so that it can be used as a pearl. Unfortunately, some of the original design was lost during the scaling process. The lower openings are designed so…
This printable spear topper transforms an ordinary wooden pencil into a miniature medieval spear. It is perfect for desks, pencil cups, classrooms, gaming tables, or anyone assembling a tiny armory of writing implements. The topper is…
this is my first model let me hear what you think guys
A model of a stage used for plays. Made for a Grade 9 English project related to Twelfth Night; a play by William Shakespeare. Was originally used to create a 3D maquette of one of the scenes in the play using LEGO characters and an MP3…