The source marked this model as adult content.
Print approx. €2.64–€3.23 excl. taxPreliminary estimate for one variant
- Downloads
- 923
- Likes
- 433
- Rating
- 5
1,819 models
The source marked this model as adult content.
Print approx. €2.64–€3.23 excl. taxPreliminary estimate for one variant
Motivation A while ago I published a pretty cool bottle opener gun which did win the Bottle Opener Contest. It Features accessory rails to mount lasers, flashlights or sights. However I was not able to find commercially available…
Print approx. €0.34–€0.41 excl. taxPreliminary estimate for one variant
I couldn't find any printable bipod that was both strong and didn't require excessive hardware, so I designed my own. The goal was to minimize the amount of fasteners used, print all required springs as compliant mechanisms, and make it…
Print approx. €2.78–€3.40 excl. taxPreliminary estimate for one variant
Attacchi torcia vari per avere sempre una torcia sulla slitta picatinny Si monta con SINGOLA VITE M4x30
Print approx. €1.94–€2.37 excl. taxPreliminary estimate for PETGSource material: PET
The source marked this model as adult content.
Print approx. €1.59–€1.94 excl. taxPreliminary estimate for one variant
These are moded picatiny rails for a pt 80 airgun, short and long
Print approx. €0.39–€0.47 excl. taxPreliminary estimate for one variant
Portacelular inspirado en la imagen de Pedro Picapiedra (Fred Flintstone). Se imprime en 4 capas de los colores Rosado, Negro, Blanco y Madera. Por su diseño puede soportar una Tablet. Vea también a Vilma Picapiedra.
Print approx. €2.91–€3.55 excl. taxPreliminary estimate for one variant
Portacelular inspirado en la imagen de Vilma Picapiedra (Wilma Flintstone). Se imprime en 5 capas de los colores : Rosado, Blanco, Rojo, Negro y Naranja. Por su diseño puede soportar una Tablet. Vea también a Pedro Picapiedra.
Print approx. €2.42–€2.96 excl. taxPreliminary estimate for one variant
Non c'è molto da dire... per montarlo serve una vite M4x30 MATERIALE: ECO-SMART PRINTOLOGIST
Print approx. €1.77–€2.17 excl. taxPreliminary estimate for PETGSource material: PET
From the Minions Fandom Wiki: "The Minions are small, yellow, capsule shaped creatures, predominantly male, who have one or two eyes that were created by Eric Guillon. (...) They bring much of the comedy in the film, and they are known as…
Since I only found Picatinny rails with imprecise dimensions on the Internet, I decided to print a new one from the dimensions given by Wikipedia. I have also saved the f3d file so that you can start your own projects with this rail.
Why Just a simple picatinny mount that you can use to mount anything you like. Use it as a starting point for your own designs....or just print it and glue something to it. Maybe you've always wanted to mount your wisdom tooth to your…
Edit 09/02/2020: Added clip 6 (hexagons). Edit 03/21/2020: Added Clip 5 and modified all to remove the need for support. Individual slot covers for picatinny rails. 4 different styles.
Parametric Nato/Picatinny Rail and Clamp Provides rail with n slots either with or without base body. Compatible with Weaver rail. OpenSCAD source code included. Designed to have minimum of elementary bodies for efficiency with i. e.…
G17 rail to Picatinny adapter, for when you want to fit a pic rail only item or mount. Gives you 5 slots. Made it as low-profile as possible while still maintaining the correct picatinny dimensions. Fitted for Gen 4, haven't tried on…
This is a remix of Picatinny Rail Riser 20mm by DNeves . An airsoft Picatinny rail riser to set accessories such as red dots and scopes 20mm higher. Remixed to fix rail width and include M3/M5 slots. The original model had a great design,…
Print upside down. Smaller one is more versatile, larger is a bit tighter and may not fit all picatinny, especially printed picatinny that might be slightly oversized. Two 6-32 screws.
Планки пикатинни и зажим для них, под свои модели. Category: Sport & Outdoors
Print the feet in as soft TPU as you can, I printed mine with 60A TPU from Recreus, the softer the better the grip. The M3 screws will thread itself. BOM M5x20 2pcs - For legs M5 Locking nut 2pcs - For legs M5x40 1pcs - For picatinny M5…
Created a M-LOK Picatinny rail, to mount accessories to your firearm. To attach, you need to buy the screws and nuts, either directly from Magpul or from aliexpress or where ever is easiest for you. You need 2 screws and 2 nut to attach.…
STANAG 4694 NATO rail for mounting firearm/paintball/airsoft accessories (scopes, lights, etc). Backwards compatible with the older MIL-STD-1913 (Picatinny) standard. Open the file in Fusion360 and edit "User Parameters" (Modify -->…
Picatinny Rail Risers in 13mm, 19mm, and 25mm. prints in orientation as provided without supports (standing on end) bolt hole is covered by a thin membrane to improve print quality, must be drilled out post-process PETG recommended as…
To assemble it you'll need 1 m3 by 20mm and 4 m3 by 30mm socket head screws, 1 self locking m3 nut and 2 normal or thin m3 nuts and 4 m4 by 6 set screws To adjust X axis turn the screw on the rear post To adjust Z axis position the yellow…
Redid my angled foregrip for M3x25 screws and hex nuts. Hangs on to the rail much, much better now. There are long and short versions here.
The original Shade Foregrip had wide top brackets so it would clamp down securely to Nerf-Rails. However this prevents it from being mounted to certain low-profile Picatinny rails (for example the one found on Worker Retaliator pump…
---------------------------------------------------------------------------------------- Description ---------------------------------------------------------------------------------------- A pair of nice and simple picatinny attached…
Print this with supports to the build plate only to handle bridging on the underside of the p-rail attachment area. PETG or PLA+ recommended for durability and heat resistance. Affixing AFG to Picatinny Rail: Vertically, you can affix…
To build one, you need Attachment print (either pic center or hole center) Stock (m3, m3 w/ heatset, or 4-40 x 3/8 screws) in either normal or short lengths Matching buttplate to the stock chosen 2x 10-32 nuts (Imperial Mounting) or 2x M5…
Disclaimer : I made this as a shitpost, I didn't expect it to be particularly useful, and somehow it's been found usable nonetheless. I imagine there are better designs, but thank you for considering mine regardless. Foregrip I designed,…
The “Knockout” Angled Foregrip design! This foregrip gives a different, unique feel when pulling the gun into your shoulder and controlling recoil! ///This cannot use the MMS Quick Release Pins! This needs actual hardware!/// It might…
version 2 is out and its smaller then ever!! Introducing the super cool Quick-Release Picatinny Rail Mount, a game-changer in the world of firearm accessories. The quick-release allows for easy changing of accessories or adjustment on the…
I designed these picatinny rails as a design exercise, but they could be useful to someone :) I've included a technical drawing from the MIL-STD-1913 standard that these rails are modelled after. Support If you'd like to support me for…
this is a robust foregrip/handle for picatinny rail
-remixed model - stronger and more massive body, resized bolt and nuts holes, remixed foots //3.1.2023 now printing model for test //4.1.2023 tested result OK, added photos. -Hardware needed: M6x20 2pcs - For legs M6 Locking nut 2pcs -…
Are you looking for a quick, convenient way to put a Picatinny rail in an OpenSCAD design? Do you want to generate a standalone rail with ports for mounting it with screws? Hopefully you do, because that's what this does. There's two…
Just a test of my modelling abilities. Works well. I basically wanted something that would print very nicely. Requires 2x M5x30 bolts and M5 nuts. Print Settings Printer Brand: Creality Printer: Ender-3 v2 Rafts: Yes Supports: Yes…
Wanted to do a Star Trek: Picard combadge with stand so here it is. Update May 5 2024 - Widened the gap in the bars to look better. Update December 19 2023 - Redesigned the whole badge to better match the screen prop. Stand base and leg…
22mm picatinny rail adapter to use in 11mm rail. Needs: 1x 20mm m3 screw 1x m3 nut
Mounts an action camera to either the right or left side of a picatinny rail. Record the action of your next paintball, airsoft, or 3-gun match. Requires a 10-32 nut and 1.25" bolt to attach to the rail, and an M5 nut press fits into the…
Update: added an optional taller version by request Why I have T1-style red dot that sits very low on the rails of my airsoft replica's. This print raises your sight by ~32mm which is perfect if you're using goggles/helmet/mesh covers.…
This is a simple faux scope. Basically, a fancy tube with a crosshair and some picatinny brackets. There are three crosshair options, two different lengths, and adjustable picatinny bracket spacing. Changelog: 5-18-2024: Release.…
Summary: 5-Slot Picatinny Rail with the correct dimensions. Note: The rail length is 54.75mm Printing instructions: Use PETG/ASA/ABS Perimeters: 3 Infill: 100% (prefered) No Supports needed - See pictures for result with or without…
A Simple Handstop for my Caliburn pump foregrip mounts via Picatinny rail. might also be usable for airsoft or real firearms, but only tested on a Calburn 'nerf' blaster. (temperature and recoil considerations) Helps keep your hand from…
Adapted the original design to fit Picatinny rail. Use two M4x30 screws to secure mount to the rail. Can be printed upright without supports.
Why I wanted to mount my actioncam upside-down under my airsoft pistol, using metric nuts and bolts and a bit of plastic. This is the result. Features Mounts on your everyday RIS/Picatinny 21mm rail Uses metric nuts and bolts Used the…
Print in upright position, no supports needed. Holes are designed slightly undersized so before assembly, drill through holes with 4mm drill. Designed for M4x30 bolt and M4 nut. 1/8 inch imperial hardware should work as well.
Perfectly sized pins for my MMS designs or your Picatinny products! They're designed to be held in by tension. And if printed correctly, they'll hold very well until specifically pushed out when needed! ///These Pins Need To Be Printed…
I made these sights for my airsoft replica of the G18C (but it should fit any picatinny rail) because I did not find any that I liked. It's easy to slide on the rail and it doesn't move after it's been installed. I'm using Planetler's…
A small adapter that allows mounting Picattiny-style gear (e.g. a tactical flashlight) on a helmet with OpsCore ARC rails. Requires an 8mm M4 screw and an M4 nut - these are used to tighten the adapter in place and ensure it doesn't slip…
UPDATE: additional versions with EXTENDED bolts ------------------------------------------------------------ Easy Bolt Action Mod ---> X-Shot Fury-X To make the FuryX, bolt action or T-pull primeable - just slide it over the rear…
A clean and easy-to-print vase model, perfect for home decor, plants, or display use. The model can be scaled freely to match your needs. No supports or raft are required, making it beginner-friendly and reliable to print. Tested…
Parameterizable Version of Picassos famous Dachshund. Just scale it as you want! Have fun with it.
Zeros to about 50m but Elev. and Windage is adjustable. Requires: 1x M2x~10mm 1x M3x~23mm + nut 2x M5x~25mm Not all picattiny is manufactured within the same tolerances thus sanding may be necessary.
A fixed AR-15 style, mil-spec buffer tube that attaches to Picatinny stock interfaces. Printed in a single piece lying flat for incresed sturdiness. Mounts with two M5x30 bolts and M5 Hex nuts. The tube has 4 postions for the stock to…
A grip I modeled after the Nerf Raider/Rampage that attaches to picatinny rail. It's not an exact 100% one to one of the grip but it's as close as I can get, and it feels the same in the hand. It's my favorite pump grip Nerf has made, and…
Update 08/14/2021: Updated EndplateV2 to keep it from catching on the charging handle. Update 08/10/2021: Added a V2 Endplate that allows the use of metal endplates. Added a hole in the Rail so that the Endplate can be removed from the…
Secure it with three 4-5mm grub screws. The CAD files are included.
Picatinny rail cover long version 156mm. 3 variants: hexagons, chevrons, stripes Made of ABS - proper supports are important
UPDATE June 2021: PiCa135 lensboard 2.stl is replaced with a new version UPDATE Feb 2021: New thumb wheel: https://www.printables.com/model/168680-pica135-improved-thumb-wheel-film-advance-mechanis Replaces the parts…
Video overview here: Usage demo here (0:23): ---------------------------------------------------------------------------------------- These are shell carriers/holders for Silly Shells ! They all hold Silly Shells horizontally across the…
A “”""scope"""" for your blasters, mainly cosmetic, but it can function as iron sights, the reticles inside the caps can be lined up for rough aiming and it has a set of actual iron sights on the top that look like a small red dot on top!…
Since the remix of Pica had errors i made a "fixed" version of that :) Category: Sculptures
This grip can be attached to Picatinny-Rails. I used the model from the link as a reference ( https://fortismfg.com/ar15-fortis-shift-vertical-grip ) Raft: No Support: No Material: 2xM4x30 bolts 2xM4 nuts
a nerf attachment that has a picatinny rail on top for attachments
See the new designs from 2025! https://www.printables.com/model/1473251-dia-de-los-muertos-papel-picados-day-of-the-dead-p by CriptasticHacker https://hackaday.io/CriptasticHacker celebrate Dia De Los Muertos (Day of the Dead) with some…
Picatinny MP7 Grip by Qwerm A picatinny version of the folding grip from the MP7A1. This is designed with some tight tolerances so it will most likely require some post processing to get things to move smoothly. I recommend using a file…
This is a 45-degree offset picatinny rail that is made to use 3m x 30mm bolts to mount. I used a file by unseenkiller and JPGunCAD (8) Unseenkiller and JP GunCAD - Pictainny Dev Blank (odysee.com) as the base. the rail is 48mm long to fit…
This is designed for PRL type shooting or any type of target shooting where you need to make notes as you go. It's designed to hold a standard credit card sized plastic card which are about £10 for 100 on amazon 0.76mm thick (30mil)x- 86…
The “Bolter” Angled Foregrip for Picatinny! This Angled Foregrip features a more sturdy, higher surface area gripping surface. It puts a little space between your grip and the center axis of the rifle, which works particularly well with…
needs 3x m4*25 nuts and bolts to mount
Here's my attempt to recreate this very detailed phaser. It took some work, but features a neat sliding top that moves the popup sight up and down, removable power cell, and squeezable trigger for that fidgety satisfaction. February 4…
This needs 2x M3x6mm SHCS and 2x M3 nuts, print all parts without supports. Press the M3 nuts into the inside of the stock point, then screw the SHCS through the picatinny, through the stock point and into the nuts. This attaches to the…
This is a single pice flashlight mount for picatinny. it is compatible with 21mm wide flashlights but was designed for the single mode WAYLLSHINE flashlights. The mount can be locked in place on the rail using 1 or 2 3/8" 4-40 screws but…
Very simple picatinny for artemis / snowpeak PP750 & PP700 Only a friction fit sufficient for bipod, not for any kind of sighting attachment please.
Designed to have a small footprint on the main rail, so that it fits behind or in front of your scope. Specifically designed to fully support the holosun 507 pistol red dot, which has the same footprint as an RMR. After printing all the…
This is the second version of the Quick-Release Picatinny Rail Mount. The V2 is about 40 percent smaller by volume then the V1. The quick-release allows for easy changing of accessories or adjustment on the fly. This thing is fully…
Im a truly 90's Kid and grew up with all those Consoles from the past. Since i had some Parts laying around and wanted to build some Cool Case to run those Arcade Games from it was no question to Print it out of my 3D Printer. You can use…
Lässt sich mit der Picatinny-Halterung nach unten mit etwas Support einwandfrei drucken. Update 14.02.2024: Der Griff ist als Anbau an eine Adderini zu schwach. Beim Spannen der Adderini über den Griff ist die Picatinny Aufnahme des…
A Pica pencil version of DSkolnik offset scribe Block. Deleted the original pencil holder and added a 5.9mm hole for the shaft of a Pica automatic pencil. Fit is snug, and helps to add a little pressure to the pencil. Other than that, a…
To assemble just look at the second picture, you print two cores, sandwich them together, put the sleeve over it and punch the pin through and then once its on the rail you can put the joined pins in to hold it in place
Between 1935 and 1938, the Czechoslovakian government had been building a line of border fortifications as a defense against Hitler's Germany. However, it was still far from finished in 1938, and in the end, it was never used because of…
A single-center dual-sided picatinny rail.
remix of https://www.thingiverse.com/thing:4906938 made the holes bigger to accomodate 1.75mm filament, just slot it in, trim, and you're good to go! Hardware needed: M5*30bolt and nut, 1.75mm filament
This is a custom base plate for an extended CZ Shadow 2 magazine. This baseplate can be used with picatinny rail attachments. My case was to attach Mantis, so it can be used together with a holster. Print it vertically with support (back…
Планки пикатинни и зажим для них, под свои модели. Category: Sport & Outdoors
This was an old design I made like 7 years ago. It got spread around thingiverse for a while so now it's here.
Two versions tactical vertical grip inspired by Magpul modeled to by printed easily in one piece without suport. Need M3 fasteners. Printing "0.20mm SPEED" 30% Infill 4 Parameters (Because of the clamping) Prusament PETG base settings…
Il s'agit d'une pièce qui semble casser régulièrement sur les C4 Picasso. Il s'agit de l'engrenage partie haute de la pièce qui ouvre et ferme les volets pour la circulation de l'air chaud ou froid. Il existe une version sur Thingiverse,…
This remix adds picatinny rails to the Dart Zone Outlaw! It's longer than RedCowl's original model, to give the front of the blaster a chunkier feel. Like RedCowl's design, this is a drop-in that replaces the front rails and re-uses the…
Its a bipod. only hardware needed is a m4*25 nut and bolt the legs also fold. yay
This is a 3-slot picatinny riser. You can mount it onto your picatinny rail to be able to comfortably use a Red-Dot sight while wearing safety goggles. Use Paint-On Supports as shown in the pictures. Supports only on printbed. Set…
This pen uses its own stiffness to grab on a 2,8mm lead (also used by Pica pencils see here: https://www.pica-marker.com/en/pen/pica-dry ) The lead is simply inserted from the tip wile pressing on the walls adjacent to the cutout on the…
This is a drop in replacement for stock red faux-picatinny that is on the Dart Zone Max Outlaw. To install, remove the stock panels (save the screws) and press in the new panels you have chosen. Insert the screws into the screw ports. You…
Two 90 Degree Adapters for the MMS Collection or your Picatinny Rails! - 90 Degree Short Adapter - 90 Degree Long Adapter (See Posted Images) These are pretty self explanatory as to what they're for. Works great with the MMS Collection,…
Picatinny rail sight riser 2 kinds of picatinny rail riser: holes riser and slots riser lenght: 45mm width:20,7mm height:43mm 2XM3 screws and nuts
Simple clip to hold wires on your rail. Designed for PETG, but works on different materials too, try for yourself. I get best performance from PETG+Carbon fibers. Durable and with nice texture.