Search results: pliers

Sort order

1,085 models

P
PrintablesPrusa Research

HERRINGBONE PLANETARY GEAR + PLIERS

Author: Emmett Lalish & ShawnGano Special herringbone planetary gear. The only way you can manufacture this piece is 3D printing as the interlocking gears cannot be assembled afterwards. Waste object (with wipe into infill) is pliers by…

Print approx. €2.93–€3.59 excl. taxPreliminary estimate for one variant

Downloads
3,915
Likes
224
Rating
4.52
P
PrintablesThe Alchemist

mini pliers

set of mini needle nose pliers one flat and another pointed. quick and easy to print PETG or ABS recommended. use 50% infill or more for strength. support needed for the pointed version just on the jaws. Shawn Gano has a great set of…

Print approx. €1.55–€1.89 excl. taxPreliminary estimate for one variant

Downloads
1,215
Likes
128
Rating
4.69
P
Printablespastaoceanfrog

Skadis - Knipex Pliers - Electronic Super Knips

Small mount for holding Knipex Super Knips pliers on the IKEA Skadis. Easy printing. Support recommended.

Print approx. €0.19–€0.23 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
1,192
Likes
149
Rating
4.83
P
PrintablesWilko_SLO

Portable Pliers (Print in place)

Print in place with PETG Z=0,3 and without support. Position This way W

Downloads
13,253
Likes
1,991
Rating
4.01
P
PrintablesClay

Gridfinity Pliers Racks Mega Pack (92 different Sizes)

Open ended Gridfinity tools racks. 3x3 through 5x6 grid bases with divisions between 7mm - 39mm 56mm total height 2mm walls all around - Strong enough for a toolbox Div widths are rounded down, most are +.5mm of extra space. Material…

Downloads
9,449
Likes
1,628
Rating
4.95
P
PrintablesMicro Center

JST Connector Pliers

Pliers specialized in removing JST connectors commonly broken all across 3D printers. This tool allows proper removal without snapping wires. Filament : Inland Peak Green PLA Printer: Creality Ender 3 S1 Both parts should be printed flat…

Downloads
6,666
Likes
2,830
Rating
4.38
P
PrintablesIvan Urbánek

Skadis holder for pliers

Simple, space efficient Skadis holder for pliers inspired by IKEA Skadis pliers holder (up to 8) by Kai . It doesn't use anything from the original model except the idea, but the idea is a good one. There are 2 versions with different…

Downloads
5,298
Likes
860
Rating
4.93
P
Printablesrace85com

HSW Filament Flush Cut Pliers Holder for Honeycomb Storage Wall

simple insert to fit universal flush cut pliers for filament cutting etc. use with blank insert_hollow from the original HSW board Check out my collection of HSW attachments here :) Printing instructions: no supports use 4 perimeters…

Downloads
4,809
Likes
843
Rating
4.87
P
PrintablesArgo

Snips/pliers holder (for Honeycomb storage wall)

Simple holder for snips/pliers. Attaches to the wall with the M4 insert from the Honeycomb wall.

Downloads
4,195
Likes
685
Rating
4.92
P
PrintablesClay

Gridfinity Pliers Rack

Gridfinity 5x3 for pliers and other tools. 8 x 15.6mm slots Prints very nice with .6 nozzle with walls outside -> inside Wider Version: https://www.printables.com/model/337990-gridfinity-pliers-rack

Downloads
3,722
Likes
564
Rating
4.92
P
PrintablesCisco3D

Flexy Pliers - Print in Place Toy

Works great with PRUSA Orange PETG No support needed, but you need to free the hinges by hand before flexing. Cheers

Downloads
3,444
Likes
797
Rating
4.87
P
PrintablesHayden P

Print In Place Credit Card Pliers And Measurement Tools

***** Its a tricky print as the clearences are low, DONT GET DISCOURAGED if it fails ****** A multi-tool. The tool has a pair of pliers, a ruler marked in centimeters and inches, and a protractor. The tool is a useful item to have for a…

Downloads
3,398
Likes
1,078
Rating
3.95

Honeycomb Storage snips/pliers holder

New, NEW Screw Wall! Check it out, its much stronger than the Honeycomb wall. https://www.printables.com/model/544779-screw-wall no support is needed, also I have one that holds TWO! Please check my other downloads for more great…

Downloads
3,055
Likes
570
Rating
4.95
P
PrintablesKai

IKEA Skadis pliers holder (up to 8)

A simple but sturdy pliers holder for IKEA Skadis. It holds up to 8 pliers (or more if they are kinda small). The holder is designed to use the universal hooks from CSD_Salszburg . You can use 3 hooks, however I use only 2 as that seems…

Downloads
2,849
Likes
494
Rating
4.81
P
PrintablesCmdrMoto

Gridfinity Nippers + Strippers + Pliers Racks

Gridfinity is the ultimate organizer for your whole workshop! Learn more at https://www.youtube.com/watch?v=ra_9zU-mnl8 Find more Gridfinity accessories at https://bit.ly/3E2NxnZ Parametric source files: Nipper Holder:…

Downloads
2,735
Likes
380
Rating
4.97
P
PrintablesShun Yu

Tabletop Mini Pliers Rack

I decided to make my own mini pliers rack after not finding one that suited my requirements - sitting on the tabletop and handles pointing up for easier access. The model prints in two pieces and fits together. You can use a dab of super…

Downloads
2,685
Likes
867
Rating
4.97
P
PrintablesToby N.

Gridfinity Nippers Pliers Strippers Rack 2x2

Simple, space efficient storage solution for small pliers/nippers/cutters/strippers used in electronics. Two standard bins in the files, one fits up to 6 pliers with a grip thickness of up to 11.5mm (the right one in the photos) and…

Downloads
2,663
Likes
743
Rating
5
P
PrintablesNerlin

Tool Holders for Filament Cutters/Pliers and Wire Strippers for the Multiboard Storage System

For the Multiboard Storage System. The cutters fit standard filament cutters (Creality) or pointy nose pliers. The wire strippers fit the ones in the picture. It may or may not fit a different brand.

Downloads
2,641
Likes
347
Rating
5
P
PrintablesJoerT

IKEA Skadis - Plier holder - 2 or 4 pliers

Print the left and right hooks flat, angled edge up, and attach them with self tapping 3x12 tapered screws. Pick the body of four or two plier variant. Or both if you want (but be sure to print hooks for each). As the hooks are separate,…

Downloads
2,548
Likes
505
Rating
4.91
P
PrintablesNautilus Forge

IKEA SKADIS - Pliers Hook

⚒ No 3D printer? No time to source components? I just opened my new e-shop where you can buy physical, ready-to-use versions of my models! Designed with passion, printed and assembled with care ⚙. 📦 Shipping across the EU: 👉 Get it at…

Downloads
2,545
Likes
479
Rating
4.73
P
PrintablesLoboCNC

Tiny Pliers (Print-in-Place)

These tiny pliers print in place without supports in about 45 minutes. They've got notched jaws for grabbing nuts or circular items, and have a built-in opening spring for easy manipulation. They have a 0.4mm gap around the pivot pin, so…

Downloads
2,156
Likes
553
Rating
4.89

Pliers organizer for toolbox drawer (2 pieces with dovetail joint)

I designed this for my specific toolbox drawer (US General 44" top chest), and the specific pliers I own. It probably won't be perfect for you unless you happen to own exactly the same stuff. But I am sharing it anyways, because some…

Downloads
2,134
Likes
448
Rating
5
P
Printablesdirtdigger

Honeycomb wall parametric pliers holder

This is a quick and dirty parametric plier holder modeled in CadQuery. To customize (assuming you have a working CadQuery install), simply set your plier dimensions and number of pliers you want to hold. Then run and it'll create your…

Downloads
1,955
Likes
486
Rating
4.92

Honeycomb Wall snips or pliers holder DOUBLE!

New, Screw Wall, much stronger than the Honeycomb Wall https://www.printables.com/model/544779-screw-wall Honeycomb Wall Cutter DOUBLE! If you want the single version please see my other Honeycomb Wall STLs I have made several see below…

Downloads
1,821
Likes
352
Rating
4.72
P
PrintablesDarren

Wall Mountable Pliers Holder

A wall mountable pliers holder I created for my tool wall using Fusion 360. EDIT: Based on feedback re-oriented the holder to print better. Print instructions Category: Tool Holders & Boxes Print Settings Printer Brand: Prusa Printer: i3…

Downloads
1,685
Likes
140
Rating
4.53
P
PrintablesAudacity Micro

Gridfinity Pliers and Wrench Holder

Original Fusion files included Printed on a Prusa mini in Polymaker PLA This work was based on other opensource work, and may inherit their license. My other Gridfinity Designs: 1/8" Endmill Holder:…

Downloads
1,680
Likes
247
Rating
5
P
PrintablesChrosta

Pliers holder for HSW

I couldn't find any easy-to-print pilers holder, so I designed it myself. This model attaches to the HSW using hexagonal tabs. These tabs then fit very tightly (making them hold as one piece) into the standard HSW inserts. Printing…

Downloads
1,666
Likes
240
Rating
4.82
P
Printabless7emar

SKADIS Pliers Holder

Pliers holder for IKEA SKADIS. ------ I printed with these settings: Resolution: 0.2 Supports: No Infill: 20% (Cubic) Rafts: Skirt Filament: Prusament PETG Signal White / Prusa Orange ------ Check out my other SKADIS accessories to create…

Downloads
1,548
Likes
264
Rating
4.87
P
Printablessacrilegor

Small pliers hanger for Ikea Skadis

Included a version without hex holes, if you want to add your own set, or don't need it at all. Hex holes are for 2, 2,5, 3, 4, 5, 6 mm I printed it on vanilla white Prusament PLA, with 0.15 layer height and 0.4 nozzle. Snug supports from…

Downloads
1,528
Likes
307
Rating
4.6
P
PrintablesBYU CMR

Fully Compliant Pliers

Summary Compliant Mechanisms A mechanism is a mechanical device used to transfer or transform motion, force, or energy. Traditional rigid-body mechanisms consist of rigid links connected at movable joints. A compliant mechanism is a…

Downloads
1,456
Likes
99
Rating
4.75
P
PrintablesDsk001

Print in Place Parallel Pliers + Multi Material Version

These are parallel pliers that you print in place. No supports needed, no assembly, they work as soon as you pick them up off the build plate. You will need to have a printer with decent bridging as there are some long ones in this print.…

Downloads
1,454
Likes
310
Rating
4.95
P
Printablesecoiras

Predator Action Pliers Mk2 -- PRUSA colors

PRUSA color scheme print of the Predator Action Pliers Mk2. Print instructions Prints in place with no supports.

Downloads
1,340
Likes
175
Rating
4.75
P
PrintablesClay

Gridfinity Pliers Rack

6 x 22.5mm slots Prints very nice with .6 nozzle outlide -> inside

Downloads
1,232
Likes
227
Rating
5
P
PrintablesKim-Janosch

IKEA SKADIS Pliers Holder

Your pliers on the wall, ready to grab, instead of buried in a drawer. A pliers holder for IKEA SKADIS pegboards. Part of my SKADIS system: every holder uses the same peg, sits flat on the board and prints without supports. Features For…

Downloads
1,202
Likes
230
Rating
4.9
P
PrintablesMicro Center

JST Connector Pliers - Updated

JST Connector Pliers - Update Improved version of our original JST Connector Pliers Filament: Inland Lime-Magenta Silk PLA Updated: 10mm M3 screw now holds both sides together Added: JST 8pin de-pinner into handle Attachment ring for…

Downloads
1,200
Likes
419
Rating
4.49
P

Power Pliers (Print in place)

a better version of the Preditor Action Pliers Mk2 Print instructions Infil: 15% or more

Downloads
1,192
Likes
272
Rating
4.87
P
PrintablesFeelgoodFactory

Wiha Pliers Set Holder for Honeycomb Storage Wall

The perfect holder for the Wiha Electric Professional Pliers, but should fit most pliers . You can either print one part to hold 2 pliers (left or right file), or two parts to fit all four pliers. The pliers/cutters in the picture are:…

Downloads
1,106
Likes
269
Rating
4.88
P
PrintablesMacman1010

Knipex pliers holder for honeycomb storage wall (HSW)

I have created a parameterizable model that fits various water pump pliers. I uploaded two files that fit my two Knipex pliers. 1x a normal water pump pliers, 1x a fitting pliers. Here you can find an OnShape Link for easy editing of both…

Downloads
1,104
Likes
325
Rating
5
P
PrintablesNémet István

Skadis hook for wire cutters and pliers

Skadis hook for wire cutters and pliers

Downloads
1,094
Likes
163
Rating
4.25
P
Printableseds_3d_shop

Eds French Cleat/wallmount Pliers and Crimper Holder/Organizer (for 10, 12 ,15, 16mm tubes and 15, 18mm FC bars, inkl .STEP)!

UPDATE 07.05.2023: After several requests i added the versions for the most common tube sizes (10, 12 ,15, 16mm) and for 18mm french cleat bar. :-) A French cleat holder for the (crimper)pliers! Inspired by a model by Mikhail on…

Downloads
1,057
Likes
129
Rating
4.8

Pliers Holder for IKEA SKADIS

Pliers Holder for IKEA SKADIS Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: No Resolution: 0.2 Infill: 25% Category: Tool Holders & Boxes

Downloads
1,023
Likes
165
Rating
4.93
P
PrintablesAnachronist

Over-engineered JST connector pliers

On Printables there are many variations of pliers designed to pull JST connector plugs out of their sockets. To me, they were all sub-optimal. I decided to design some JST connector pliers that addresses all the deficiencies I found. The…

Downloads
1,018
Likes
230
Rating
4.97
P
PrintablesIguanahotsauce

Pliers Holder HSW

Holder for a standard pair of pliers that works with the honeycomb storage wall

Downloads
970
Likes
153
Rating
4.85
P
PrintablesHoppend

Long Reach Pliers for large fingers

***** FILE IS SET TO MM ***** You might have to scale 100x Infill I printed with 20% infill. The only part that needs 100% infill is the moving handle (with cam) up past the hinge hole. (I had the cam snap off on one of the pliers.)…

Downloads
893
Likes
171
Rating
4.71
P
PrintablesThomas Croonen

Pliers holder

Pliers holder. Mountable with two 3.5mm srews. For the pliers nearly every owner of a 3D printer needs. Mount on your wall, your printer, your board. Update 11/2022: New version for IKEA Skadis pegboard. You need additional two hooks from…

Downloads
879
Likes
126
Rating
4.57
P
Printableskhrillian

Plastic JST pliers (remix)

Remix of JST Connector Pliers to add a few features: 3D printed screw to hold everything together Narrower head to fit in more places (eg. can now reach most of the connectors in the Bambu Labs X1 head when changing hot ends) Teeth…

Downloads
870
Likes
159
Rating
4.93
P
PrintablesLoboCNC

Better Tiny Pliers (Print-in-Place)

This is an update of my earlier tiny pliers that improves the spring and also includes a needle-nose version. With an overall length of about 90mm, you can stash these everywhere they'd be handy. The stubby version has grooves for…

Downloads
839
Likes
293
Rating
4.59
P
PrintablesBootStrap

Wall Mount Pliers

Screw Mount Pliers holder Print instructions Category: Organization Print Settings Printer Brand: MakerBot Printer: MakerBot Replicator 2X Rafts: No Supports: No Infill: 20%

Downloads
827
Likes
100
Rating
5
P
PrintablesSvettis

Pliers/Cutters Holder for Pegboard Square Holes CC 38mm

A Pliers/Cutters holder for pegboards with Square 9mm holes and a center-center (CC) distance of 38mm. 6 Holes, each 15x15mm. I printed with a raft so the supports for the pegs would have something to print on.

Downloads
823
Likes
83
Rating
4.75
P
PrintablesSome Guy 384763

Gridfinity 3x4 pliers and nippers rack

This is inspired by the dozens of horizontal plier racks for gridfinity. This design has the following improvements: Wider slots (6 in a 3x vs 7) Shorter at 4x vs 5x Top lip which holds spring loaded pliers and nippers in a more compact…

Downloads
820
Likes
126
Rating
4.9
P
PrintablesClearThread

Gridfinity Drop-In Tool Holder/Rack for Pliers/Side Cutters/Wire Strippers/Tweezers

A general-purpose easy-access tool rack built on the Gridfinity system. Intended to be a tool rack that fits most basic hand tools and prioritizes ease of access. Most side cutters will hold themselves by the handle, saving the tips. Most…

Downloads
806
Likes
126
Rating
5

3 tools (pliers) holder for HSW honeycomb storage wall

This holder allows you to store 3 pliers of different sizes on the honeycomb storage wall by RostaP. I created it because almost all available holders has only 2 sections of equal width and length, whereas most sets on Amazon have 3…

Downloads
797
Likes
155
Rating
5
P
Printablessacrilegor

Small pliers hanger for Ikea Skadis (for painted boards)

ncluded a version without hex holes, if you want to add your own set, or don't need it at all. Hex holes are for 2, 2,5, 3, 4, 5, 6 mm I printed it on vanilla white Prusament PLA, with 0.15 layer height and 0.4 nozzle. Snug supports from…

Downloads
791
Likes
199
Rating
4.67
P
PrintablesPippa

Skadis Organiser - pliers

The ends fit with a good friction fit from my printer, otherwise, a dab of superglue should help. No supports are needed if ends are printed flat and the main body is printed on end.

Downloads
781
Likes
281
Rating
4.92
P
PrintablesBRE3DLOVE

Pliers / Scissors holder for HSW (honeycomb storage wall)

Latest files are available on MakerWorld. Get the full Plate Print Profile: https://makerworld.com/en/models/189397 ===== A simple HSW holder for pliers or scissors. My particular style of scissors are able to snap-in upside down ===…

Downloads
774
Likes
102
Rating
4.63
P
Printablesmorp

Ikea Skadis Ratcheting Pliers/Crimpers holder

This is a rework of some similar models on here to be easier to print and more universally fit larger and different branded ratcheting pliers. Has a recess for the ratcheting latch and a lip on the front to keep pliers in place. Tested…

Downloads
769
Likes
136
Rating
4.97
P
PrintablesSailorJerry

Gridfinity Pliers Wrack (Small)

A 4x4 station to hold up to 6 pliers, wrenches, or ratchets. Slots were made wide to allow for thick-handled tools. Base based on Zack Freedman's Gridfinity "Templates.f3d" file. If you like this design then click here to check out my…

Downloads
767
Likes
171
Rating
5
P
PrintablesHoppend

Hartmann Micro forceps (pliers)

MAJOR UPDATE: Long reach Pliers V3 This update makes the pliers print more easy then ever! No more fettling... However you now need a small M3 countersunk bolt and a normal or nylock nut. Note If you don't have (or don't want to add) an…

Downloads
742
Likes
215
Rating
4.93
P
PrintablesArekseon

Multi material TPU pliers

combined the idea of interlocking PLA and TPU, tried my first multimaterial print

Downloads
689
Likes
55
Rating
5
P
PrintablesPranks

Skadis Knipex pliers holders/mounts

I wanted a holder for the pliers with as little visible plastic as possible and came up with this. Not the most easy to print or economical but it isn't too bad. It comes in 2 different sizes: 34.5mm works for at least 70 02 160 and 26 12…

Downloads
662
Likes
75
Rating
4.3
P
PrintablesGhostguy6

Double Scissors or Pliers Holder for Skadis Walls

A Simple remix to hold 2 pairs of scissors or pliers to your Skadis wall system. This holder works well for pliers with dipped handles. Some moulded handles may not fit as they tend to be wider. For Best results print with the flat part…

Downloads
654
Likes
94
Rating
4.93
P
PrintablesFreakOnLeash

HSW pliers holder

Pliers holder for HSW from two pieces. Pliers can be oriented in different positions.

Downloads
654
Likes
105
Rating
5
P
PrintablesHoppend

Long Reach Pliers - No Hardware required

3D printed long reach pliers V4. The pliers are designed by me and a remix of a model that I posted. The earlier model required an M3 bolt and nut, this one has a "twist and lock" d esign Print instructions infill I printed with 20%…

Downloads
639
Likes
267
Rating
4.8

IKEA Skadis pliers holder

This is IKEA Skadis pliers holder for Toptul 6" (DFCJ2206) pliers. If you need holder for side cutters (wire snipper) - please try this one . This item is inspired by IKEA SKADIS Collection by CSD Salzburg, it uses the same hook system (I…

Downloads
624
Likes
87
Rating
4.75
P
PrintablesZebra105s

Pliers Gridfinity

Pliers can be a challenge as the smaller ones like to pop up, so I designed this to hold them closed. I've included the open one without a top as well, for those well behaving pliers!

Downloads
619
Likes
121
Rating
5
P
PrintablesBK

Pliers Cover for spring pliers included in Prusa Kits

I wanted a cover to keep the pliers included in the MK3S kit closed (since they are spring-loaded and are normally open). This is a simple cover to slide over the end of the pliers! Also included a STEP file for easy remixing. Print…

Downloads
613
Likes
138
Rating
4.97
P
PrintablesMrRogers

Pliers Tool Holder for IKEA SKADIS Pegboard

Intro Designed for the wire cutters, side cutter, shears, clippers, snippers, and/or pliers that a hobbyist might have laying around on their workbench. Three versions so you can decide how many angle cutters or pliers you want to hold…

Downloads
611
Likes
60
Rating
5
P
PrintablesCSUM Makerspace

Pliers/Channel Locks Organizer

A slanted organizer to hold pliers, channel locks, wrenches, etc. They're interlocking, so you can print however many you need. 1.9" tall (without tools). Print Settings Printer Brand: FlashForge Printer: Creator Pro Rafts: No Supports:…

Downloads
604
Likes
86
Rating
5
P
PrintablesSDHayes

Pliers holder

I bet you can figure out what it is.

Downloads
597
Likes
113
Rating
4.91
P
PrintablesBurninGems

Pliers Rack

This is a pliers organizer. It looks fancy but it's not. You can add some tree supports if you'd like.

Downloads
591
Likes
194
Rating
5
P
PrintablesKN16

High Quality Needlenose Pliers

These are great for precision work. They can be surprisingly strong but clearly are not for high stress work. They have the advantage of being non-conductive if you're using them in conjunction with electronics projects. Print with 5 or…

Downloads
591
Likes
104
Rating
3.67
P

Gridfinity Pliers Box

Made to hold a pair of Prusa Needle-Nose pliers and a Harbor Fright 5in Micro Flush Cutters

Downloads
590
Likes
96
Rating
4.77
P
PrintablesJS94

Pliers Holder for Universal Peg Board System

Works with these pegs & 3 peg base: https://www.printables.com/model/283286-universal-peg-board-peg-system/comments/453604 5x 7/8" (22mm) square holes 2x 7/8" x 1.57" (22mm x 40mm) rectangular holes

Downloads
587
Likes
103
Rating
4.5
P
Printablesdrho1337

Flexible TPU pliers

This is a flexible pliers. You will need for the assembly: 2x Handle 2x Jaw 1x Buffer You can print the handle as well as the jaw out of any filament you like. But the buffer must be printed out of TPU.

Downloads
578
Likes
131
Rating
5
P
PrintablesKrystek

pliers holder

pliers holder

Downloads
576
Likes
84
Rating
4.87
P
PrintablesKrazyKoder22

Pliers Multitool

Fully 3D printable pliers-style multitool styled after the Leatherman Charge Plus ( https://www.leatherman.com/charge-552.html ) No screws or springs required, some filament is used for hinges. Assemble the Pliers LAST for an easier time.…

Downloads
556
Likes
140
Rating
4.33
P
PrintablesStellasFun

Sy's Peglock - Needle Nose Pliers

A magnetic mount for securely holding Workpro needle nose pliers (or other medium size pliers with a taper). This model uses my locking pegboard mount system for 1" standard pegboards. Magnet holes (if present) are designed for 10mm…

Downloads
555
Likes
53
Rating
4.5
P
Printablesre:printed 3D

JST Connector Pliers (remixed)

A remix of the JST Connector Pliers to keep them from falling apart. This model will need one heat-set insert for a 3mm screw and a 3mm x 6mm screw to keep them together. As with the original model, print in your choice of filament with…

Downloads
554
Likes
98
Rating
4.94
P
PrintablesShawn Gano

Pliers - Self Opening

Overview: What kind of pliers do you use in math class? Answer: Multipliers! These pliers are designed to be easy to print, moderately strong and they have built-in springs to self open when you release pressure on the handles. Included…

Downloads
551
Likes
129
Rating
4.83
P
PrintablesPC_84

CREALITY K1 / K1C HONEYCOMB PLIERS HOLDER

This is a Pliers Holder to be attached on the back of the Creality K1 or K1C or on the K1 + K1C HONEYCOMB TOOL WALL created by LEOTE3

Downloads
548
Likes
87
Rating
4.8
P
PrintablesWiz3D

HSW Pliers Holder Remix

UPDATE: 11/15/23 - added a version with the hex mounts in flat side up rather than pointed side up for those that prefer that mounting style. Prints with no supports

Downloads
541
Likes
57
Rating
4.75
P
PrintablesKN16

High Quality 90° Needlenose Pliers

These are great for precision work. They can be surprisingly strong but clearly are not for high stress work. They have the advantage of being non-conductive if you're using them in conjunction with electronics projects. Print with 5 or…

Downloads
539
Likes
180
Rating
5
P
PrintablesAlluvian

HSW Pliers holder

Honeycomb Storage Wall Plier holder remix. Remix is just chopping off the top of the model and re-adding the chamfers to make it smaller and still work just as well. No other changes, just wanted to be more efficient with filament and…

Downloads
538
Likes
103
Rating
4.67
P
PrintablesDavid

RPi Zero 2 frame, cover, pliers MK3/S+

Compatible with MK3/S/+ printers utilizing the Einsy Rambo control board. rpi zero 2 frame: works with both the Zero W and the new Zero 2 with no risk of damaging the small components on the PCB. holds on the Zero: doesn't fall off works…

Downloads
533
Likes
50
Rating
4.89
P
PrintablesSamw11

Gridfinity cutters/pliers holder

I couldn't find any models that fits my needs to store these cutters that always just end up on my desk so decided to design my own. Needs no supports and works perfectly with gridfinity.

Downloads
526
Likes
94
Rating
5

honeycomb holder smaller pliers

This is a honeycomb holder smaller pliers. It is designed for this Knipex tool, but other plier could work too. https://www.amazon.de/gp/product/B005EXOF6S/ref=ppx_yo_dt_b_search_asin_image?ie=UTF8&psc=1 Print Option: PLA 20% Infill If…

Downloads
506
Likes
68
Rating
5
P
PrintablesMicha

HSW Knipex pliers holder (34mm)

This is a remix of the Customizable Knipex Wall Mount (VDE) and the amazing Honeycomb Storage Wall (HSW) fitting 34mm (width)Knipex pliers. I've provided two variants: HSW Knipex 34mm: This variant comes with the HSW clip mount directly…

Downloads
502
Likes
55
Rating
4.8
P
PrintablesAaron

Knipex Pliers Holder for Ikea Skadis

This is a Knipex pliers holder (tested on 160mm ones; hopefully it works for other lengths) for an Ikea Skadis pegboard. I built it from scratch, but based it on Kevin's Knipex cutter holder, and uses CSD_Salzburg's Skadis Universal Hook…

Downloads
499
Likes
50
Rating
4.9
P
Printablesdanijel

Honeycomb Wall Pliers Holder

Similar design principles to many other accessories, eg the shelf from this project: https://www.printables.com/model/152592-honeycomb-storage-wall/files Requires a hollow insert, also available in the project above.

Downloads
498
Likes
79
Rating
5
P
PrintablesAgustin Arroyo

Pliers - 3D printable tool

📢 Grab your 3DNYLON filament and adhesive pack at www.3dlac.com and enjoy easier and more precise 3D prints 💪 --- These fully 3D printable pliers are designed to be easy to print and have a print in place design. They're support-free and…

Downloads
492
Likes
150
Rating
4.8
P
PrintablesMarwyn

Parallel jaw pliers (sturdy) - MRW

FUTURE TASKS Specialized jaws for specific tasks Maybe some kind of fast exchangeable jaws or adapters ------------------------------------------------------- ADD-ONS Connectors jaws great for handling balbulab x1/c/p1p hotend connectors…

Downloads
492
Likes
78
Rating
4.93
P
Printableskripso

Switch Opener Basic and Pliers Version for CHERRY MX Switches (STL + STEP)

UPDATE: added 5pin support The tolerances between inserts and outside bodies may need an update based on how well our printer is calibrated. Print Settings : Filament tested : I used Pet-G, PLA does not matter layer height: 0.12mm-0.16mm…

Downloads
484
Likes
72
Rating
4.71
P
PrintablesSchrodsCat

OpenGrid Pliers Holder

Plier & Tool Holder for the openGrid System Organize your workspace with this custom-designed plier and tool holder, made specifically for the openGrid wall organization system! This holder is perfect for securely storing pliers, snips,…

Downloads
484
Likes
52
Rating
4.86
P
PrintablesCraftswoman.cz

SKADIS pliers holder for the whole wall [Držák na kleště]

There are four different holders with five different positions on the wall (20 stls in total). The holder types: 12 mm holes for 10 pliers 18 mm holes for 8 pliers 22 mm holes for 7 pliers combo with 5 pcs with 12 mm, two with 18 mm and…

Downloads
484
Likes
75
Rating
4.71
P
PrintablesGizmoTheKing

Gridfinity Wide Pliers Holder

Gridfinity compatible triple pliers holder for wider tools that don't fit in the standard gridfinity pliers holder. Variations included with different amounts of vertical support for tools (as a ratio of total length). Works for any…

Downloads
484
Likes
85
Rating
4.67
P
Printablescodysechelski

Gridfinity Crescent Mini Cutters & Needle-Nose Pliers Set Holder

2x5x3/4 Grdifinity block to hold the Crescent Brand Miniature Cutters & Needle-Nose Pliers Set https://www.amazon.com/Crescent-Miniature-Needle-Nose-S2KS5-Hobbyist-Electronics/dp/B002Z9Y07I The tools sit below the “lip” so you can stack…

Downloads
483
Likes
68
Rating
5
P
PrintablesCmarlow

Pliers rack

The small one is good for sidecutters and other small pliers. The normal is pretty versatile and fit most pliers. (Its the one in the picture) I attached a pdf drawing with measurements that you can look at to decide with one fit you.

Downloads
482
Likes
51
Rating
5
P
Printablesludodg

RC Shock shaft pliers

I discovered the RC Shock shaft pliers, designed by Luisom77 and printed it out. ( https://www.thingiverse.com/thing:4418072 ) I did so in PETG and regular infill. The pliers functioned OK, untill I needed them for something witch…

Downloads
472
Likes
70
Rating
5
P
Printableswizhack

Gridfinity Stripper pliers rack fit for drawers

This is my remixed version of Zack Freedman's gridifinity stripper holder rack which allows you to store pliers on the edge while closing a drawer, depends on your pliers size (tested on ikéa alex). 3 versions of this rack : 1x3u = 120 mm…

Downloads
468
Likes
63
Rating
4.82
P
Printablesleihog

Pliers mount for IKEA Skådis

Main selling points: Pliers are clearly visible so it's easy to find the right one It's pretty small for a horizontal mount The width is customizable so it works just as well for a pair of pliers as with a dozen of them (assuming you…

Downloads
468
Likes
126
Rating
4.75