108 models
Pride is all the time. I currently have designs for lesbian, gay, bisexual, pansexual, transgender, a lambda, and a labrys keychain. If you don't see your sexual/gender identity here and have an idea of how it can be represented on a…
“PRIDE” text extruded from vertical into a 45 degree face. Sits on top of a chamfered base. Includes a PDF file that can be used to laser cut a thin adhesive cork sheet for the model bottom. Filament: Pick a “fast change” “silk” or…
For Ikeas Skadis here is a small decorative Pin/Insert in a rainbow form, either the pride flag or the bisexual flag or any other three striped flag. Because I don’t have access to multiple colors of filament or a printer to use multiple…
Celebrate the enduring spirit of unity and pride with my Stonewall Pride Brick with Battle Damage. This remarkable 3D model beautifully captures the essence of a vintage brick from the historic New York era, evoking a sense of nostalgia…
PRINT INSTRUCTIONS Keep the layer height at or below 0.2 for best results I didn't need a raft, your experience may vary. For most of them all I did was integrate a colour change at certain layers. Others (Ex: Intersex) I used my MMU 2s.…
Rainbow in pride colors. Print each stl in different colour, glue together if needed but it holds together well if just sitting on a desk. Pictures above were printed in 0.3 layer height.
Rufus Shinra's Coins used in his Bright Lights attack while fighting Cloud. Printed in resin on an Elegoo Saturn.
Cougar Pride is a 3D scan of a statue located at Washington State University, Vancouver campus. it is a 15-foot tall monument commissioned by Gary Schneidmiller and created by artists Mike and Chester Fields. I used 3d Scanner App…
KPop Demon Hunters Saja Boys Pride Lion Coaster. Change filament color above 2mm.
This is a part of our Stormpride Sisters project! Find out more. Subscribe to the newsletter and get a free model: https://www.dakkadakka.store/stormpride-sisters Kickstarter pre-launch page:…
For the upcoming Pride Parade in Prague, my girlfriend (who works for a beer company) was looking for a fun gift for colleagues walking in the parade. Therefore, I designed this colorful bottle that can be used as a keychain. Find me on…
I have lost the legs for my Producer's Pride brooder plate for my chickens. My first iteration of this model didn't have tapers on the prongs that are inserted into the brooder plate. This make them nearly impossible to use. This version…
This is an easy-to-print colorful egg. No supports necessary. Assemble with a drop of superglue.
I couldn't find anything like this so decided to try my hand at it in Tinkercad. Simple enough idea. The color changes ever 1mm (plus extra 1mm at base). I printed it all with the same nozzle, manually changing and purging in-between…
Edit 6/19/2024: I added the 1$, and 25c with a solid layer of one colour, i used white, I found this helps with the key ring staying together, as mine failed at the colour change. I've not had a place to test the 1$ key, so please post a…
Espero que les guste :) . Pueden imprimir con los parámetros que gusten. La idea es pintar las lineas con pintura.
Given that the Quick Flexis contest is happening during Pride Month, I thought it was fitting to create a flexi Pride flag. This is the new iteration of the Progress flag. My favorite, as it is the most inclusive of all.
3D printable hooks for pride flags that look rather... hmm... Fully parametric -- if the angle or the size are too large for your holes, it's as easy as editing the numbers in Fusion360, then right-clicking the relevant ready body and…
I took my trans cart key, and made it into a 6 colour pride flag styled version for all the pride! Printed using an MMU on my voron 2.4 in ABS+, and have handed out a few hundred to date with a lot of success. Make sure you get your layer…
A simple parametric pride flag rainbow pin generator. It allows you to generate pins with the colors of the pride flag of your choice and the pins are designed to be printed with any single filament printer. Usage You can just run make to…
Update: I added a new design for “CANADA - 1st NOT THE 51st” - files are cn51*.stl instead of cnfs*.stl for the original "CANADA IS NOT FOR SALE. You can print this with your single colour printer. You will be printing three separate…
Old School sign “Pride Of the American Road” Wall art. Original Indian Motorcycle "Pride of the American Road" signs, particularly those made of porcelain enamel, were primarily produced and used during the 1940s and potentially into the…
A Pride & Prejudice themed wall decoration with quote from book! BEST WITH THREE COLORS
USA American Pride Hitch Cover – 250 Years of Freedom 🇺🇸 Show your pride every mile you drive with this bold American Eagle hitch cover , designed to honor 250 years of freedom (1776–2025) . Featuring a striking full-color emblem with the…
Some flags are the same with different colors so they are uploaded in the same files. Assembly for all the flags is identical the Pansexual flag is used as a showcase Put glue into the pentagon on the base and insert the stripe, depending…
I love the show "The Great British Bake Off" and it is my undersanding that one of the shows sponsors is Homepride Flour. I like Homepride's mascot "Fred" but I haven't been able to find any cookie cutters for this character. Here are…
Printed on a Prusa mk4, .2 layer height, at about 1% of the original model size for the one seen in the photo. Would recommend doing it a bit bigger than that, this one turned out about 2 cm long.
I loved the original idea to have a box to bring travelling for all our HRT injection supplies, but it needed more pride, since I had just built a MMU for my main printer… Thus, this was born… I've yet to fully successfully print it, as…
🌈✨ Gang of Worms: The Pride Edition! ✨🌈 In the print profile you can find 2 different version (keychain & normal). #PrideEdition #ShinyStarUnicorn #LoveIsLove #CelebrateDiversity 🏳🌈🦄💖 Gang of Worms 🌈🦄💖 ⭐ Commercial License ⭐ Do you want…
Pride banner model with engraved guidelines for painting. There is a stand alone version with a base and a version designed to be glued onto other models. Perfect for use as a battle standard for your army of miniatures. Happy pride…
A Star Trek the Next Generation style starfleet combadge with a bisexual pride flag in the oval portion. It has almost exactly the same dimensions as the actual combadge props used on the show. This is not set up for multi color printing.…
Remixed and pained in multicolor in Bambu Studio, 3mf requires 12 filaments.
I wanted some pride tokens to pass out around school, so I made some.
Pride & Prejudice themed bookmark (best used with two colors)
Trans pride pins in two different sizes! I printed both with a 0.4 nozzle,. On the back side, there is a “hole” so that the grid is exposed the ensure the glue is holding on. I ordered some basic pins to glue them on. Have fun!
Pansexual (or any other pride flag with three colours) pride pins in two different sizes! On the back side, there is a “hole” so that the grid is exposed the ensure the glue is holding on. I ordered some basic pins to glue them on. Have…
Rainbow painted should work with 5 separate color flags. Nonbinary/Ace should work with 4 separate color flags. Pan can work as a 3 color lesbian one as well. I can only do up to 5 colors with the MMU.
💙🤍💗 Hex Code Trans Pride Flag 💙🤍💗 This design captures the trans pride flag in a creative format, featuring HEX color codes in raised text instead of the traditional color stripes! 🖤 Each stripe’s HEX code is proudly displayed, making it…
I was working on designing a Pride brick keychain when I came across Nat's ‘Pride Brick with Battle Damage’. I liked it much more than the design I had come up with and decided to remix it to use as a keychain or bag charm. I also created…
I created this pride flag pin design as I couldn't find any other models that I felt were suitable. These were created for my own use as gifts for friends and as such have my “logo” on the backside, if I have more time to work on these…
Happy Pride! I have gotten very into HueForge so made this! If this offends you Click Here! Anycubic Black Anycubic White Jayo Pink (love the color so so about material quality) Jayo Blue Base layer: .24 Layer Height .08 Black until layer…
Would recommend printing with at least 20% infill so the lettering can print properly, your printer might have trouble if you print at a lower infill. Happy Pride Month!
Printables didn't like the M117 gcode command (it works) so I had to upload the gcode via zip file. If you want to slice it yourself it takes some customization. At the time of writing this PrusaSlicer doesn't support adding color changes…
"Freely given by the Mantis Tribe to those they respect. Greatly increases the range of the bearer's nail, allowing them to strike foes from further away." Earning the respect of the Mantis Tribe is no easy feat. Those who manage to…
These are the 3D DLRG youth logo. Perfect for multicolorprinting. Material: PLA Layer: 0.2mm Nozzle: 0.4mm Supports: No Alignment: Back side on the print bed This is an artistic interpretation. This product is not from the manufacturer!…
This 3D model is a Benchy-style boat featuring a Progress Pride flag and a lifebuoy on top. The design combines function
This is a stencil for the symbol from the Lyons' Pride unit from Fallout 3! Minor connections have been made so it's not exact from the game, but very close. The original image is of course not owned by me - it's a fan recreation for fun.…
A 3d-printable LGBTQIA+ pride flag ornament made from LEGO®-Esque pieces. Instructions Print each colored band Red Orange Yellow Green Blue / Cyan Magenta / Violet Print the ring piece (Optional) Use a greyscale filament for best results.…
This is a custom 3D printable set for Kia Pride (2016) : A headlight bulb cap to replace the missing OEM cover A flexible TPU O-ring that seals the cap in place Designed based on real-world measurements and tested on Ender 6 with both ABS…
ABS 0.1mm layer height 100% infill I print multiple on 2 layer raft. Paint with 000 brush and acrylic paint that been thinned a little with water. Coat with acrylic gloss medium. CA glue pin tie back on.
ABS 0.1mm layer height 100% infill I print multiple on 2 layer raft. Paint with 000 brush and acrylic paint that been thinned a little with water. Coat with acrylic gloss medium. CA glue pin tie back on.
CAT pride, for those people in your life.
ABS 0.1mm layer height 100% infill I print multiple on 2 layer raft. Paint with 000 brush and acrylic paint that been thinned a little with water. Coat with acrylic gloss medium. CA glue pin tie back on.
🌟 Hex Code Non-Binary Pride Flag 💛🤍💜🖤 This is a minimalist 3D model of the non-binary pride flag, where the traditional colors are replaced with their HEX codes! Each stripe is represented by its corresponding HEX code in bold, raised…
Bisexual pride pins in two different sizes! I printed both with a 0.4 nozzle. On the back side, there is a “hole” so that the grid is exposed the ensure the glue is holding on. I ordered some basic pins to glue them on. Have fun!
PRIDE I would like to start this Printable's page with a simple goal - EQUALITY & LOVE For fear of getting it wrong / upsetting others and to make it clear to everyone, I am ASD, ADHD and DYSLEXIC. These are what help me be me and I…
ABS 0.1mm layer height 100% infill I print multiple on 2 layer raft. Paint with 000 brush and acrylic paint that been thinned a little with water. Coat with acrylic gloss medium. CA glue pin tie back on.
Print with support for the magnet recess on the underside. Designed to accept a 15x2mm rare earth magnet.
This is a version of the 'Progress Pride Flag' ( https://en.wikipedia.org/wiki/Rainbow_flag_(LGBTQ) ) Made this project for Pride month. Wanted something to display in the window to show support for my local LGBTQ+ community, and was…
ABS 0.1mm layer height 100% infill I print multiple on 2 layer raft. Paint with 000 brush and acrylic paint that been thinned a little with water. Coat with acrylic gloss medium. CA glue pin tie back on.
🌈 Hex Code Pride Flag 🌈 This is a fun and unique 3D model of a pride flag where each stripe is represented by its HEX color code instead of the actual colors! 🖤🤍 Each HEX code is in bold, making it stand out beautifully against the base.…
It's an Imperial Star Destroyer from Star Wars, but in Pride colors. The coloring is from the Intersex-Inclusive Pride Flag by Valentino Vecchiette , which itself is based on the Progress Flag by Daniel Quasar . There are three version…
ABS 0.1mm layer height 100% infill I print multiple on 2 layer raft. Paint with 000 brush and acrylic paint that been thinned a little with water. Coat with acrylic gloss medium. CA glue pin tie back on.
Use wall ordering outside to inside or the parts will likely not fit together I saw another model like this on here, but it's multi-layer for each color and it just looks very weird to me. This may not work that well, but I just wanted to…
I found and loved the brick model last year, and made many for local events. Loved the keychain designs too, but thought I'd make the keychain functional as a security whistle. Super loud and perfect for alerting people to security and…
ABS 0.1mm layer height 100% infill I print multiple on 2 layer raft. Paint with 000 brush and acrylic paint that been thinned a little with water. Coat with acrylic gloss medium. CA glue pin tie back on.
ABS 0.1mm layer height 100% infill I print multiple on 2 layer raft. Paint with 000 brush and acrylic paint that been thinned a little with water. Coat with acrylic gloss medium. CA glue pin tie back on.
Flag from DavlorCreations and pin from Ly
Twitch might remove these after June so I decided to immortalize them.. Category: Signs & Logos
Disability pride pins in heart shape! On the back side, there is are two “holes” so that the grid is exposed the ensure the glue is holding on. I ordered some basic pins to glue them on. Have fun!
When I saw something like that online, I loved it. At the time however, I identified with a label they didn't have models for so I made them myself. This escalated massively with friends asking for their own versions, so now I have a…
I wanted to make some pride magnets and here they are! Technically those models can be used to make any flag. Holes' on back of the magnets diameter is 8mm - optimal size for 7mm small round magnets Holes are 0,5mm deep - just to mark…
ABS 0.1mm layer height 100% infill I print multiple on 2 layer raft. Paint with 000 brush and acrylic paint that been thinned a little with water. Coat with acrylic gloss medium. CA glue pin tie back on.
Poly pride pins in two different sizes! I printed both with a 0.4 nozzle, but I think the smaller one would be even better with a finer nozzle. On the back side, there is a “hole” so that the grid is exposed the ensure the glue is holding…
Printables didn't like the M117 gcode command (it works) so I had to upload the gcode via zip file. If you want to slice it yourself it takes some customization. At the time of writing this PrusaSlicer doesn't support adding color changes…
Introduction: Happy Pride Month, everybody! Remember: Despair is something to fight! Even when we're all exhausted. This keychain is a small way we can make the world a better place. Signify who you are and who you support while filtering…
Simple spacer that spaces your turn signal lights to be flush with the bumper. Should also fit Mazda 121's and Kia Pride's of the same years. (1988 - 1993). You will need longer screws to install this. I suggest printing these in atleast…
ABS 0.1mm layer height 100% infill I print multiple on 2 layer raft. Paint with 000 brush and acrylic paint that been thinned a little with water. Coat with acrylic gloss medium. CA glue pin tie back on.
This design enable connecting multiple spray paint cans with different color and spray in the same time. Cans can be connected to each other using a wide masking tape - maybe need to design a connector between cans. After connected…
Custom little pin I designed for my bf. Can be painted for any 5 stripes pride flag, or other flag if you so desire. Examples printed in black PLA (with an attempt at a bit of white), and painted with nail polish. Used standard clutch…
3 and 4 striped flag options for pride flag keychains! Does not need a multicolor printer if you manually set layer-based color changes. Print at .2mm layer height for best results. Set color changes at layers 6, 9, and 12. Onshape link
Thanks to the Cricut EasyPress Mini, to the designs created and then printed with the prusa, I created this t-shirt for the Pride Month. The files are compatible with MK4 and MMU3, except that the colors are at least 8 for the rainbow…
4 strip flag: ace, nb 5 strip flag: trans, aro 6 strip flags: rainbow Print settings: These are step files, each modle consistes if several parts and you can chage the collor of them in a slicer like bambu studio. you can print them in 2…
Universal wall mount for Thule bike carriers. Compatible with UpRide and ProRide.
Replace Ford Festiva / Kia Pride Pop / mazda 121 center console ashtray with USB chargers. I bought the 12V 4‑port USB charger from Aliexpress for around 6 USD, along with a 2‑pin harness connector so it can be easily unplugged. To mount…
intersex flag - intersex bi flag- bi 3 stripe- pansexual, polysexual 4 stripe- asexual, nonbinary 5 stripe- trans, aromantic-asexual(sunset), aromantic, lesbain(5-stripe), gay(man)(5-stripe) 6 stripe- pride(rainbow) 7 stripe-…
Custom-designed decorative speaker grill/rest for standard 6.5" (165mm PCD) speakers. This design features a bold, stylized lion emblem with a honeycomb mesh structure. The honeycomb pattern not only looks great but also provides…
Inter pride pins in two different sizes! On the back side, there is a “hole” so that the grid is exposed the ensure the glue is holding on. I ordered some basic pins to glue them on. Have fun!
If you have a Thule Standard Upright Bike Carrier 525 (made between 1997-2001) and don't like the frame grabbing design, or can find one of these bike racks super cheap, this frame grabber upgrade will more securely (and softly) hold your…
Replacement legs for the Producer's Pride brooder plate in upright orientation. Printed in PLA, but PETG or ASA might be necessary depending on environment for heat resistance.
Learn more about Braillest's embossing and repair process here . https://github.com/Braillest-Books/Pride-and-Prejudice-by-Jane-Austen
The Pride Lion Sculpture - a decorative print, perfect as a desk or shelf decoration.
Multicolore Spanish pride heart "Orgullo" by request. This file contains the heart split into parts so each can have it's own color following the pride flag.
Detailed 3D printable Jiren Pride figurine, ready to print on FDM in PLA. Usage & Links Personal use: print freely. Commercial/digital redistribution is only allowed with a valid Patreon license: https://www.patreon.com/Marjers Portfolio…
Detailed 3D printable Deadly Sin Pride figurine, ready to print on FDM in PLA. Usage & Links Personal use: print freely. Commercial/digital redistribution is only allowed with a valid Patreon license: https://www.patreon.com/Marjers…
