Search results: proxxon

Sort order

300 models

P
PrintablesRaegin

Küpper and Skadis Proxxon Slimline combination wrench holder

Description Proxxon combination wrench holder including versions for both Küpper and Skadis Pegboards. In order to save space the wrenches are placed sideways. Each wrench size is displayed to the left of the wrench. Available models…

Downloads
652
Likes
273
Rating
0
P
PrintablesJoerg_Wagner

Spielfreier Nutengleiter für Winkelanschlag Proxxon FET

Austausch-Gleitschiene für den Winkelanschlag der Proxxon FET, um das übermäßige Spiel zu reduzieren. Benötigt wird neben dem 3D-Druckteil noch eine 24mm lange Gewindestange M4 für den Feststeller. Ich habe in die Bohrung vorab Gewinde…

Downloads
306
Likes
21
Rating
5
P
PrintablesFlo

Clamp for Proxxon handheld tools / Spannvorrichtung für Proxxongeräte

With this clamp, Proxxon and all other tools with a maximum diameter of 35 mm and a clamping diameter of 20 mm can be clamped in vices and with an additional clamp on the table. An M5x30 bolt and an M5 nut are also required. Link for an…

Downloads
43
Likes
6
Rating
0
P
PrintablesBedLevelBoss

Saw_blade PROXXON Box_Lid

Welcome, and thank you for choosing my model. I will provide some context for this model. This custom-made storage box is specially designed for Proxxon saw blades with a diameter of 50 mm. The box is 3D-printed and equipped with a…

Downloads
5
Likes
1
Rating
0
P
PrintablesHD_Creator

Router base for Proxxon tool

This set of easy to print parts makes a nice and well working router out of your Proxxon multi tool. It should fit for all similar tools that have a 20mm diameter metal clamping base. The height of the router bit tip vs. the base plate…

Downloads
1,302
Likes
196
Rating
4.71
P
Printableswm

Vice for Dremel, Proxxon etc.

Works great, 60 mm wide. Print instructions When assembling turn nut M6L counter-clockwise.

Downloads
1,237
Likes
176
Rating
5
P
PrintablesSpamBouncer

Tube and Rod Cutter for ProXXon IBS / E

Sometimes it is practical to use the ProXXon IBS/E to cut thin pipes or rods. And it would be nice if this could also happen at an angle of 90 °. So I did a remix of the cool tool published by GreaseMonkey88 to cut small diameter rods or…

Downloads
567
Likes
116
Rating
5
P
Printablesb3n3d1k7

Proxxon Dremel Router Base

Router base for proxxon dremel (Proxxon Feinbohrschleifer FBS 240/E). Will fit other dremels with a 20mm diameter for attachments. Uses a M4 screw and nut to secure the dremel. I still recommend to also grab the dremel during use and not…

Downloads
499
Likes
90
Rating
5
P
Printables3db.creation

Proxxon Micromot Drill Press

This is an older project I have finally got round to uploading! A drill press stand designed to fit the Proxxon Micromot 60E/F. It also gave me a chance to try out my laser cutter at the time. Unfortunately there isn't much in the way of…

Downloads
494
Likes
166
Rating
5
P
PrintablesPedja

Circle cutter adapter for Dremel/Proxxon router/grinder

I needed to cut holes for speakers but also to carve notch for speaker edge to fit in. As I did not have proper tool for that job I had to make it on my own. As I already had cutting guide adapter for my Proxxon grinder I decided to make…

Downloads
388
Likes
129
Rating
4.67
P
Printablesthommy

Holder for combination wrench (e.g. Proxxon SlimLine)

Wall holder for 15 combination wrenches (6mm to 21mm). Numbers indicate the wrench width, suggested to print in separate color. The Proxxon SlimLine kit fits perfectly. Includes three mounting holes (4mm Spax). I printed with a 0.25mm…

Downloads
325
Likes
42
Rating
5
P
PrintablesZK

Proxxon KT70 PCB CNC (micro) mill

I wanted to build a cheap and accurate CNC mill, to engrave and drill simple PCB boards. The build is using easy to get components (mostly 3D printer parts), and some printed parts. The plan was also not to make any irreversible changes…

Downloads
322
Likes
73
Rating
0
P
Printablescewo

Proxxon KS 230 Table Saw Sled And Stop Block

Fully 3D printed table saw sled for the mini Proxxon KS 230. Parts: Sled Runner Guide Nut Railnut Lever Stop Fasteners (not 3D printed :-) 1x M3x20 socket head (fully threaded) 1x M4x25 socket head 2x M3 hex nut 1x M4 hex locknut The…

Downloads
315
Likes
40
Rating
5
P
PrintablesWout Peeters

Proxxon thermocut shape cutter tool

Inspired by the multi corner cutter offered by https://www.shiftinglands.com/ I decided to make something similar for myself. I also added a circle shape that allows me to cut circles as well. Some assembly and non 3D-printer work is…

Downloads
314
Likes
42
Rating
0
P
PrintablesProjunk

Proxxon MF70 CNC kit

Proxxon MF70 CNC kit The Proxxon MF70 milling aluminum: https://www.youtube.com/watch?v=0W1iQ1PUNVY Following improvements/changes have been made compared to the design of ttsalo: full x-axis table range is now available. Using the ttsalo…

Downloads
313
Likes
51
Rating
0
P
PrintablesNico

Proxxon PS13 replacement sanding tips, straight, 45 and 90 degree

Print laying flat using supports for best strength along the tool, see example slicer picture. Printed in PETG, 4+ Walls.

Downloads
294
Likes
69
Rating
4.4
P
PrintablesLeDomme

Proxxon Pengrinder PS13 tools

Different tools for the Proxxon PS13, best printed in resin, not sure about FDM. I use 3M 2-5-468MP doublesided tape to stick regular dry and wet sandpaper on the tools. For the round one I use round die punches and for the triangle I use…

Downloads
245
Likes
36
Rating
0
P
PrintablesMichi Selos

Fence for Proxxon MBS 240

Fence for Proxxon MBS 240 I printed it in PETG, but a stiffer filament is recomended. Uses a M5 Heatinsert and a M5x30 Screw with an 8mm Hex Head.

Downloads
235
Likes
19
Rating
5
P
PrintablesBiff Brensing

Bohrer-Schleifvorrichtung / drill bit sharpening jig für Proxxon TG 125/E Tellerschleifer

Diese Schärfvorrichtung habe ich in einem Video eines sehr geschätzten Youtubers gesehen, den er von einer ebenfalls sehr geschätzten Firma hat. Hier ist meine Variation davon mit fixem Winkel zum Hinterschliff des Freiwinkels. Ihr könnt…

Downloads
223
Likes
21
Rating
5
P
Printables3D-Muc

Proxxon disc sander - drill grinding tool - auxiliary tool

This tool is a auxiliary tool for grinding drills with a proxxon TSG 250/E plate grinding machine. The tool is inserted into the rail so that the angle matches the drill. For easier printing, the template is divided into two parts

Downloads
219
Likes
35
Rating
0
P
PrintablesMarco

Proxxon Micromot Rotary tool holder

Simple design to hold a Proxxon Micromot 60 rotary tool. It holds the 12V power supply adapter and all accessories which come with the “ Model building and engraving set with Micromot drill/grinder 60/E ”. The collets holder can be slid…

Downloads
214
Likes
51
Rating
0
P
PrintablesAndreas Mass

Proxxon Micromot 60 Rotary Tool - Distance Rail

A handy adjustable distance rail for parallel cutting with the Proxxon Micromot 60 rotary tool. It might also fit other rotary tools from them but you'd need to check yourself. Nevermind the long bolts in the photos, I was still waiting…

Downloads
198
Likes
71
Rating
5
P
PrintablesFrantisek23

PCB Cutting table for Proxxon Micromot drills with a 20mm neck

PCB Cutting table for Proxxon Micromot drills with a 20mm neck. Very useful mini cutting table can use to cut PCB boards. The table can be connected to a vacuum cleaner. Use a 40mm diamond disc for cutting The model consists of 3 parts,…

Downloads
192
Likes
47
Rating
0

Dremel to Proxxon Drill Press Adapter

Couldn't find this part available, so I made one. It makes the Dremel Press compatible with multi-tools with a 20mm neck like the Proxxon FBS 240/E, without losing any functionality. It holds the tool centered, as the original Dremel one.…

Downloads
192
Likes
27
Rating
5
P
Printablesseb111425

Combo Wrench Holder Pegboard 15mm grid (screw version) (e.g. Proxxon Set)

Combo Wrench Holder Pegboard 15mm grid (screw version) (e.g. Proxxon Set) I adapted it to a 15mm Pegboard grid with 6.5mm holes for 6mm screws. I cut 6mm threads into the 5mm holes to use 6mm metric screws.

Downloads
185
Likes
22
Rating
0
P
PrintablesTimmaey

HSW Proxxon Wrench Hanger

Simple Wrench Hanger for Honeycomb Storage Wall (HSW). Designed to securely hold wrench sizes 6-19. The hex holders are arranged thoughtfully so the two files align seamlessly when placed next to each other on the wall. Why I designed…

Downloads
176
Likes
23
Rating
5
P
PrintablesMarc Liyanage

Proxxon MB 200 drill stand to Dremel 8220 rotary tool adapter

This is a small threaded adapter that makes the Dremel 8220 rotary tool fit into the Proxxon MB 200 drill stand (after removing the Dremel’s EZ Twist cap). Modeled in Autodesk Fusion 360 and printed on a Formlabs Form 1 . You can view the…

Downloads
171
Likes
8
Rating
5
P
PrintablesAlex

Micro Table Saw for Proxxon FBS 240

super small and adjustable table saw for straight cutting, with slots on the table for additional jigs height and width adjustable from 0mm up to more than 45mm if you slide the disk mandrel out just two m3 screws needed, you may need to…

Downloads
170
Likes
36
Rating
4
P
PrintablesStefan

Einlage für (Proxxon) Ratschenkasten

Einlage für einen älteren Proxxon Ratschenkasten. Die Einlage besteht aus 3 Teilen um auch auf kleineren Druckern gedruckt werden zu können. Maße (alle 3 Teile zusammen): 430mm x 172mm x 46mm. In meinem Beispiel mit PLA gedruckt.

Downloads
167
Likes
21
Rating
5
P
PrintablesJR-3D

Proxxon Micromot 60E Stand

Based on my stand for Dremel 3000, I designed this one for Proxxon 60E upon request from Jara_454860. The base has two holes that allow it to be attached to a worktop. Or you can attach it to a piece of wood board to make the device more…

Downloads
166
Likes
16
Rating
0

Handwheel for mini lathe MD65 (Proxxon SD300)

Die Minidrehmaschine Hobbymat MD65 (baugleich Proxxon SD300) hat keine Schloßmutter an der Z-Achse, sondern nur eine durchgehende Leitspindel mit 1mm Steigung. Um den Support zu verfahren muss ordentlich gekurbelt werden - das ist mit dem…

Downloads
156
Likes
13
Rating
0
P
Printablesknives127

Gridfinity storage for Proxxon grinding and polishing tools

Gridfinity storage for Proxxon grinding and polishing tools Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: Doesn't Matter Supports: Doesn't Matter Resolution: .3 Infill: 20% Filament: eSun PLA Category: Tool Holders & Boxes

Downloads
154
Likes
35
Rating
4.33
P
PrintablesRobBaesjou

Simple stand to hold sanding arbors of Proxxon PS13 pensander

Simple stand to hold the 8 sanding arbors of Proxxon PS13 pensander

Downloads
151
Likes
10
Rating
0
P
PrintablesLeDomme

Proxxon Pengrinder PS13 Toolholder

Black Tools are original, transparent are printed with resin by me (you'll find the tools in my profile) Printed and tested in ABS (Nobufil ABSx Galaxy Blue), so your mileage may vary. I added a test piece with a single holder for you to…

Downloads
150
Likes
13
Rating
0
P
PrintablesMr.MaWe

Proxxon Micromot Maschinenschraubstock MS4 Backen

Backen für den kleinen Proxxon Micromot Schraubstock MS4 auf'nem CR10S V2 DD gedruckt 100% Infill für den Rundstab mit den Backen nach oben und Stützstruktur

Downloads
147
Likes
22
Rating
5
P
PrintablesZoid

Gridfinity Proxxon Collets

Simple holder for Proxxon collets and chuck based on templates by Zack Freedman.

Downloads
142
Likes
42
Rating
5
P
PrintablesHybridkunst

Proxxon FBS240 Turbo Fan

This is a turbo fan driven by a Proxxon FBS240. Use it for whatever you like it. If you'll leave the turbo fan unit off, you'll have a pretty nice fixture for your Proxxon Tool.

Downloads
140
Likes
23
Rating
0
P
Printablesrynn

Clamping jaws for round material for Proxxon FMS 75 (Spannbacken für Rundmaterial für Proxxon FMS 75)

Clamping jaws for the Proxxon FMS75 precision mechanics vice for clamping round material. There are jaws for round material with a diameter from 4 mm to 12 mm in 0.5 mm steps. Other diameters between 4 and 12 mm can be created with…

Downloads
135
Likes
33
Rating
0

Index wheel for minilathe Hobbymat MD65 (and Proxxon SD300)

Inspiriert durch die Indexscheibe von Tony_G ( https://www.thingiverse.com/thing:726758 ) habe ich für meine Minidrehmaschine Hobbymat MD65 (baugleich mit Proxxon SD300) eine Indexscheibe mit 5 Grad-Einteilung konstruiert. Damit kann ich…

Downloads
131
Likes
20
Rating
0
P
PrintablesKevin Chagneau

Proxxon Tool organizer

Inspired by this model of a 3D printing colleague https://www.printables.com/de/model/270144-dremel-rotary-tool-organization , which is a very good choice for Dremel tools, I drew my own smaller version especially for Proxxon tools. This…

Downloads
131
Likes
32
Rating
0
P
PrintablesoXiVanisher

Gridfinity storage for Proxxon Micromot 60E

A 1x6 gridfinity storage for Proxxon Micromot 60E Edit 2024-08-06: Uploaded correct version of the .3mf file

Downloads
130
Likes
18
Rating
4
P
Printablesdziobu

Proxxon KS230 limiter

Limiter for Proxxon saw.

Downloads
129
Likes
12
Rating
0
P
PrintablesGiorgioFoX

Proxxon 28608 FMZ vice TPU clamp support

This models can be printed in TPU and used with Proxxon Vice to better keep fragile object. Available flat or with aligned 45 degree cut. Buy me a coffee if you want to support me!

Downloads
128
Likes
29
Rating
5
P
PrintablesRPK

Router for Proxxon FBS 240/e

EN: It was one of my first tinkerings for my Proxxon machines and I had downloaded the print files from Thingiverse at the time. What bothered me, however, was that you had to unscrew the cap nut on the drill head on the machine to expose…

Downloads
128
Likes
17
Rating
0
P
PrintablesZoid

Proxxon MF70 accesories

All parts are designed for M5 screws.

Downloads
123
Likes
16
Rating
5
P
PrintablesFrantisek23

Simple PCB Cutting table for Proxxon Micromot drills with a 20mm neck

PCB Cutting table for Proxxon Micromot drills with a 20mm neck. Thi is variation of my mini cutting table Very useful mini cutting table can use to cut PCB boards. The table can not be connected to a vacuum cleaner. Use a 40mm diamond…

Downloads
120
Likes
14
Rating
0
P
PrintablesKaperkapeike

Proxxon Adapter - Soldering iron holder, Heat Set Inserts press - Schmelzmutter Presse

not a real remix but strongly inspired i have designed an adapter for a green adjustable soldering iron with which it can be used in the MICROMOT drill stand MB 200 as a press for heat set inserts. The soldering iron is available from…

Downloads
119
Likes
17
Rating
0
P
PrintablesRemy66

Support Accessoires Mini Tour Proxxon - Proxxon Mini Lathe Accessories Support

Support pour outils et accessoires pour mini tour Proxxon PD250 Les supports d'outils et accessoires sont fixé à l'extérieur du bac récupérateur

Downloads
117
Likes
15
Rating
0
P
PrintablesJS_Wa

Universalgleiter Proxxon FET

------------------------------------------------Deutsch------------------------------------------------- Universalgleiter für Nut der Proxxon FET 27070 Version 1.0 Initial Version der Nutgleiter Kommerzielle Nutzung: Dieses Model ist für…

Downloads
115
Likes
9
Rating
4
P
PrintablesPabe

Circle jig for Proxxon IBS/E

Two Jigs for cutting a circle in light material (PC, wood …) There ar two jigs, one for the diameters of 50-160mm (in 10mm increments) and the second one from 55-165mm (in 10mm increments). Use a 2mm milling cutter , with 3mm you have to…

Downloads
115
Likes
26
Rating
5
P
PrintablesJühu

Proxxon IBS/E wall mount

prints without supports (print orientation as shown in pictures) 250x200 minimum buildplate size. layer height: 0.25 or 0.2 walls: 2 I used 10% infill

Downloads
114
Likes
51
Rating
0
P
Printablescewo

Proxxon KS 230 Stop Block

This stop fits the Proxxon KS 230 mini table saw. It allows repeatable cuts with the fence. A M4x20 hex screw and a M4 heat set insert are needed for the thumb screw. Printed with PLA, 0.3 mm layer height. The knob is pre-bridged, no…

Downloads
114
Likes
9
Rating
0
P
Printablesmkeveney

Proxxon rotary tool mount and fixtures

A mount for my Proxxon rotary tool, and a few simple fixtures to go with it. More photos and complete article here: http://keveney.com/posts/rotary-tool-fixtures/

Downloads
114
Likes
32
Rating
0
P
PrintablesDan

Heatgun Proxxon Honeycomb HSW

Heatgun holder for Honeycomb Storage Wall together with M4 Screws and the M4 nut inserts

Downloads
108
Likes
16
Rating
0
P
PrintablesToFe

Small lathe improvements: proxxon to lathe mounts

Proxxon Micromot to small "hobby" lathe mounts. Only for plastic or aluminium works! (Toolpost version is for 60 x 60 mm toolpost.) Print Settings Printer: Molestock Rafts: No Supports: No Resolution: 0.2mm Infill: 80% octagonal Notes:…

Downloads
104
Likes
15
Rating
0
P
Printablesbrookito

Elbow adapter for Proxxon Micromot FET saw

The elbow adapter minimizes the space required for the suction connection. The connection diameter is 36 mm for the opening. Category: Hobby

Downloads
104
Likes
3
Rating
0
P
PrintablesAlex

Right Angle Adapter V4 for Proxxon FBS/IBS Quiet Spiral Bevel Gears, dampened

Previous versions were really loud because of the straight bevel gears, using spiral bevel gears design the noise is reduce significantly. See Video: This version also uses a bigger main shaft bearing, with a more precise assembly method…

Downloads
100
Likes
15
Rating
0
P
PrintablesLeo_xiv.

Gridfinity Tool Holder - Proxxon Ratchet wrench and Sockets

A custom made Gridfinity holder for the ratchet wrench and sockets out of my Proxxon ratchet wrench set as seen in the second image. Measurements: Length: 168mm (4 Gridfinity units) Width: 84mm (2 Gridfinity units) Height: 38mm (5…

Downloads
98
Likes
25
Rating
5
P
Printablescewo

Proxxon Fence Stop

Small stop for the Proxxon table saw KS230 lateral fence. Intended for repeatable rip cuts with the mitre fence. It needs an M3 thumb screw and an M3 heat insert. Printed with PLA, 0.3 mm layer height and variabel layer heights.

Downloads
97
Likes
10
Rating
0
P
Printables3D servis

PROXXON MICROMOT NUT

PROXXON 28500-76 redukční kroužek pro brusky Micromot

Downloads
95
Likes
8
Rating
5
P
Printablesb3n3d1k7

Proxxon drill bit sharpener base

Drill bit sharpener base for proxxon dremel (Proxxon Feinbohrschleifer FBS 240/E). Will fit other dremels with a 20mm diameter for attachments. Use the drill holder from the original model

Downloads
94
Likes
20
Rating
4
P
Printablesinfradom

Proxxon IBS/A holder

This is the base fixture. Additional custom made parts can be mounted on this base fixture. On the side, you can insert 2 M6 rivet nuts to fix additional addons. Please only tighten these rivet nuts very slightly, otherwise the plastic…

Downloads
92
Likes
19
Rating
0
P
Printablesrobwhi

Proxxon MF70 Alignment assistant

Little assistants to help align stuff on the PROXXON MF70 micro mill (and presumably the standalone X-Y table by the same manufacturer). The slot is 6mm and the hole 6mm. UPDATE 29.3.2015: I made one out of aluminium. I used a 3mm end…

Downloads
85
Likes
6
Rating
0
P
PrintablesZelenaar

Proxxon foam cutter - fence/glider - lasercut 3mm

Fence, glider to be used for the Proxxon foam cutter. 3mm MDF or plywood (example in 3mm populier multiplex) Design : fusion360 with ‘finger joint’ addin lasercutter : Roly LaserMATIC Mk2 XW, 30w some extra foam in de gliderpart can help…

Downloads
84
Likes
4
Rating
0
P
PrintablesICT Avatar

LED Light proxxon drill stand mb 140/s

Prototyp Ver 1. LED RING https://tinyurl.com/m8zy9ar 12V DC Adapter Print instructions Category: Hand Tools

Downloads
83
Likes
7
Rating
0
P
PrintablesAlex

Proxxon FBS/IBS dust shield mount

DIY dust shield, sand the mount clearance to your preference, assembles with four M3 screws I used a half liter bottle for the transparent shield, you can use whatever else you want

Downloads
83
Likes
29
Rating
4.5
P
PrintablesEdy

Halter für FLEX-DOT-Schraubendreher von PROXXON - Außensechskant-Schraubendreher

Halter für FLEX-DOT-Schraubendreher von PROXXON - Außensechskant-Schraubendreher Ich habe die ganze Kollektion der FLEX-DOT-Schraubendreher von PROXXON. Leider habe ich keine Halter dafür gefunden die mir gefallen haben, um sie an einer…

Downloads
81
Likes
13
Rating
0
P
Printablesprimo

Proxxon MF70 CNC Conversion

You can use the Endstop Limit Switch Bayonet if you are using Makerbot style endstop PCBs. I am using the BigTreeTech & Rat Rig Rodent CNC Controller running FluidNC. You can find the config for FluidNC in the rodent.txt, make sure to…

Downloads
80
Likes
9
Rating
0
P
Printablesmhwlng

Gridfinity 6x2 Proxxon IBS/E holder

Gridfinity 6x2 Holder for Proxxon IBS/E rotary tool and accessories There are two parts I used a 0.2mm layer height with a 0.4mm nozzle. Included are the f3d files

Downloads
78
Likes
16
Rating
0
P
PrintablesAlexander

Proxxon TBM 220 Speed Control Enclosure

Important: Adding a speed controller is hazardous and must only be done by well trained personell. I got a new Proxxon TBM 220 Micro drill press for small parts. Great little machine. As I often work with PLA the minimal speed is often…

Downloads
76
Likes
12
Rating
4.5
P
Printablesoe7mbt

Proxxon Heißklebepistole Halterung

Standhalterung für die Proxxon 28192 Heißklebepistole HKP 220 Print instructions Unassociated tags: glue gun, heißklebepistole, HKP 220 , hot glue Category: Hand Tools Summary Standhalterung für die Proxxon 28192 Heißklebepistole HKP 220

Downloads
76
Likes
12
Rating
0
P
PrintablesTheGreenMamba

Proxxon Tool and Power Supply Holder

Including STEP and fusion360 files. For smaller printers the model is also cut in 4 pieces

Downloads
76
Likes
21
Rating
0
P
Printablesdrei-d-w

osVAC neo M32 - Proxxon FET Adapter

osVAC neo M32 - Proxxon FET Adapter

Downloads
76
Likes
5
Rating
0
P
PrintablesPointNemo

Proxxon Soldering Iron Holder

Printing Parameters: Material: PETG Resolution: 0.2 mm Perimeters: 3 Infill: 40 % Supports: no Assembly: 1 hex screw M6x40 1 nut M6

Downloads
75
Likes
6
Rating
0
P
PrintablesAlex

Proxxon LWB 50mm Disk Guard

disk guard for the lhw conversion disk holder from here: Proxxon LWB to LHW Conversion disk holder by Alex | Download free STL model | Printables.com

Downloads
72
Likes
5
Rating
0
P
Printablesjohn3volts3

PROXXON lathe (250/e) angle gauge / calibre d'angle)

Theses are gauges for easily set the support at usual angles. Make sure your printer is on the corner ! Print Settings Printer: Any Rafts: No Supports: No Resolution: 0,2mm Infill: 25% Notes: Verry simple to print. Make sure your printer…

Downloads
72
Likes
10
Rating
0
P
PrintablesKevin Le Brun

Gridfinity supports for Dremel, Foredom, and Proxxon bits

The supports are compatible with 42mm gridfinity grid. The one with tools is made to accomodate the Proxxon collets holder. The holes should fit 2.4 mm (3/32") and 3 mm (1/8") bits. I usually print those in PET or PLA with brim to ensure…

Downloads
71
Likes
18
Rating
5
P
Printablesueda

Proxxon DB250 tool rest

A simple sparepart of the original handrest and a bigger version of the toolrest for the Proxxon DB250 micro woodtunring machine. There are two variants of the bigger version, one has the same height as the original one, the other is…

Downloads
71
Likes
8
Rating
5
P
PrintablesHenk

Clamp for Proxxon tools and Unimat 1 system

I made a remix of the Proxxon Vice Clamp (see: https://www.thingiverse.com/thing:1298491 ), so I can use it with my Unimat 1 tool set. Now it has slits for the Unimat mounting system and the centerheight is 5 cm from the bottom. Print…

Downloads
70
Likes
10
Rating
0
P
Printablesgsohler

Proxxon FBS240 Cutting Table

As described ... it works like a charm You need: Orginal Proxxon holder (thing 2123329) small wooden board 8 wooden screws Proxxon Cutting blade Assemble the parts together ... Category: Machine Tools

Downloads
69
Likes
13
Rating
0
P
Printablesreinerv333

Einpress Maschine 3D Gewinde "PROXXON"

Um Gewinde Einsätze Einpressen zu können habe ich mir den Proxxon Bohrständer angeschafft und etwas Modifiziert , Aufnahme für die Einpresstifte und ein Prisma für Runde Teile und dann noch eine Kabelführung an der Säule des Bohrständers.…

Downloads
69
Likes
5
Rating
0

Watchmaking Faceplate for Proxxon 150E

This is a functioning watchmaker's faceplate. It allows to precisely fix irregularly shaped parts to process them in a lathe. This one has M16 thread on the faceplate and fits Proxxon 150E lathe. I'm sure adaptations can be made to fit it…

Downloads
69
Likes
19
Rating
0
P
PrintablesHenk

Clamp for Proxxon Micromot and Unimat 1

This is a remix of an earlier published clamp for Proxxon micomot tools. This one fits in the 5x5x5 cm raster of the Unimat Toolset. That also means you can only use it for the smaller Proxxon Micromot series like 50E Print instructions…

Downloads
68
Likes
4
Rating
0
P
PrintablesS.ina

Proxxon Vice - Surface protector

Using your proxxon vice on the kitchen table or a random cuppord and not wanting to damage any surfaces? This is your 30min-print-time solution. Prints in pretty much any material - No supports needed. Recommendet print settings: 0.4…

Downloads
67
Likes
13
Rating
5
P
PrintablesHenk

Adapter for "DREMEL® SHAPING PLATFORM (576)" to Proxxon micromat

I have a Dremel "shaping platform" and wanted to use it with my Proxxon micromot. So I designed an adapter for it. The adapter is basically a collet that fits th 2 cm collar of the micromot. Print instructions Category: Hand Tools Summary…

Downloads
65
Likes
27
Rating
0
P
PrintablesMAKERTEAM®

MT-SYSTEM Holder: Proxxon 27130 Hot Air Gun Holder (Proxxon Heissluftfönhalter)

This holder has especially been made for the small hobbyist hot air gun 27130 from Proxxon. The gun fits very well into the 45,5mm center hole which is slightly sloped to the user to get the gun out as easy as possible. Width: 60mm It is…

Downloads
65
Likes
7
Rating
0
P
PrintablesAlex

Height adjustable router support for rotary tool proxxon remix

I wanted to design this tool similarly from scratch but I found this smart design on thingiverse and I adapted the tool mounting system to work with proxxon tools with 20mm mounting ring like the FBS 240/e

Downloads
64
Likes
11
Rating
3
P
PrintablesJára

Proxxon stand base fix

I recommend to print 4 perimeters with 0.4mm nozzle. I has been using 25% infill. The base is a little bit shortened for tight fastening. Note: Please grab remaining pieces from original model. This is only a stand, you will need more…

Downloads
64
Likes
5
Rating
1
P
PrintablesMirko

Proxxon MF70 CNC Conversion Fix for Bubblegum

The part is marked as WIP since I need to fix the face plate on the back. You can already use the parts if you install the original Proxxon plate on the back of the lower axis. The original files for the lower axis are off center on my…

Downloads
63
Likes
4
Rating
0
P
Printablesmirabatek

Proxxon MS 4 Vise Table Clamp

This is a clamp for the Proxxon MS 4 vise, designed to securely mount the vise to a table. For the main clamping screw, I'm using a metal screw and nut instead of a fully printed solution, as it provides better strength and durability.…

Downloads
62
Likes
13
Rating
5
P
PrintablesEdy

Halter für FLEX-DOT-Schraubendreher von PROXXON - Schlitz-Schraubendreher

Halter für FLEX-DOT-Schraubendreher von PROXXON - Schlitz-Schraubendreher Ich habe die ganze Kollektion der FLEX-DOT-Schraubendreher von PROXXON. Leider habe ich keine Halter dafür gefunden die mir gefallen haben, um sie an einer…

Downloads
61
Likes
5
Rating
0
P
Printablesmweisshaupt

Proxxon-Collet-Holder

The Proxxon Micromot came with a collet holder but it was not suitable to fit on the drill stand mb200. Therefore I designed this simple holder which you can put on the main pole of the stand. Might fit on other poles as well as long as…

Downloads
61
Likes
15
Rating
5
P
PrintablesS2021

Schubladeneinsätze für Proxxon Zubehör

Volumen: 60x60x35 / Boden 3 mm Dateiformate: 3mf / step gedruckt mit: Prusa MK4 verwendetes Filament: Prusament PLA Lipstick Red Düse: 0.4 Schicht: 0.2

Downloads
61
Likes
20
Rating
0
P
PrintablesSlyka

Proxxon PD250/e Way Covers

A set of magnetically attached way covers for both the lathe bed and cross slide. The bed covers are meant to hold 100mm flat bellows which can be found on ebay for pretty cheap. They consist of one bottom piece that attaches to the bed…

Downloads
61
Likes
7
Rating
0
P
PrintablesPlastikSchmied

Proxxon MF70 DIY CNC conversion

Hello everybody, this is my latest project: a CNC conversion of the Proxxon MF70 milling machine. The mill was upgraded using a combination of Ender 3 components and a few additional parts. For control, I’m using the original 3D printer…

Downloads
60
Likes
27
Rating
5
P
PrintablesStaszek Salik

Proxxon Micromot MB 200 adapter for 900M soldering iron

Attach 900M style soldering iron to your drilling station. The trilling station hole diameter is 2cm.

Downloads
60
Likes
9
Rating
0
P
PrintablesGabriele

Dremel Holder for Hobbymat MD65 or Proxxon SD 300

Dremel Holder for Hobbymat MD65 or Proxxon SD 300 with original tool post

Downloads
60
Likes
4
Rating
0
P
PrintablesMasterDisaster

Proxxon 6 -21 Gridfinity storage

I remixed the Wera Holder from @MrStolarsky for my Proxxon Slimeline. The Photo shows my Print with a little meassure error which is corrected in the printfile. You can also insert magnets (2x5mm) to hold the wrenches in place, which I…

Downloads
57
Likes
14
Rating
0