61 models
EDIT TWO YEARS LATER - I know a lot of people actually like these a lot more than I did, but really I have a much better version now - if you are interested you can find them HERE. Because the world is a wonderful place full of diverse…
Print approx. €0.16–€0.20 excl. taxPreliminary estimate for one variant
🇪🇬 أهلا و سهلا Welcome to Egypt! The only remainder of the Ancient 7 Wonders of the World ! This model depicts the Great Pyramid of Khufu/Cheops , the Pyramid of Khafre , and the Pyramid of Menkaure , as well as the smaller building…
These painter’s props (also called painter’s pyramids) let you elevate your workpiece while painting, staining, or finishing. The small pointed tips minimise surface contact, allowing you to work on both sides without sticking or marking.…
🇪🇬 أهلا و سهلا Welcome to Egypt! Print The Pyramids of Giza in their true setting with intricate detail! This model was developed in collaboration with Micropolitan , combining the MiniWorld3D detailed model of the landmark with…
A miniature interpretation of the Pyramids of Giza, reduced to their essential geometric form while preserving their iconic presence and timeless monumentality. Part of the Tiny Landmarks collection, this piece translates one of the…
Tried to make us a quality pyramid-triangle-paint-stand-thingi. FEATURES- All 3 models stack well regardless of orientation. -4 ECO stands held 95lbs of buckets without fail. -A single SUPER stand held my wight of 160lbs balancing on a…
Simple stackable painter's pyramids to print without supports. Most other I saw have circular holes on the sides, which are hard to print with no supports. This design has triangular holes for that reason.
I printed in PLA Infill: 15% Layer Height: 0.20mm Variable Height: Change height from 2 layer to the end to 0.1mm Supports: No Check other Valentine keychains https://www.printables.com/model/1162970-my-sexy-valentine-keychain…
I designed this in PrusaSlicer using 2 pyramids. It is pretty much a vase mode part and it is stackable for easy storage. I used PETG and .4mm layer heights with a .6mm nozzle X.
3D Printable Ancient Decor Sculpture
Don't let your paintwork get stuck to the table! Don't wait forever for one side to dry - do it in a single session! “But how?” I hear you cry. Use these Perky Peaks Painting Pyramids to hold up your work. The small surface area of the…
Use these to support objects you're painting, allowing you to paint both sides of the object without waiting for one side to dry. These are space saving too, as they are stackable! Four sizes are provided: 30mm (recommended for small…
Mathematical! Can be printed without infill since TPMS structures are generally self-supporting. I used two walls and two top/bottom layers and it came out great. Just print it slowly for the best results, especially the first layer for…
Five equilateral triangular pyramids interlocking with each other.
I bought a set of these at the store for eleven dollars. Then I lost them. Then I bought another set. Then I found the first set. So now I design my own, because apparently that's the lesson I took from this. What they are: painter's…
I printed this at 0.2-layer height using rectilinear infill, however if I was to do it again, I would use gyroid infill. with rectilinear infill the nozzle hits the print and makes a loud noise. It did print but I think it would be better…
This is my custom Egypt Pyramids Desert tile for catan-style boardgame 2.0 by dakanzla.
Use the model to display some of your prized golf balls from across the globe. Print in any material.
You can change the height of the needles in the slicer. A PDF with the layout is attached. You can combine with the model Heart – triangular design od autora Jakub Lattenberg
Remix of a design by ben_horner on Thingiverse . Ben I changed the design in the following ways: Removed the smallest (zero pip) pyramid as none of the Ice House Games rules use them Added pips similar to the commercially available game…
This model includes several must have features such as interlocking parts! AMAZING! Stackability! UNBELIEVABLE! Porous design! These pores not only reduce filament use but also create minimal “lift”. It will have a decreased tendency to…
Use the Fusion 360 parameters height, diameter and sides to quickly create pyramids with different sides and dimensions. Use STEP files for best speed and quality. All of my functional 3D models are available on Thangs.com…
These are compatible Pyramids for the Pyramids game series by LooneyLabs. They stack properly with the original pieces. I've changed the design for better tolerances and a consistent printable fit.…
10 by 10 inch square with 1 inch by 1 inch priamids
Printable eight-pyramid towers of Hanoi set. Prints in two alternating stacks on the printer. Preview shows the hanoi-style stack. These are intended to be played by setting up the stack and moving pyramids from stack to stack across…
pyramids securely elevate your project of the work surface with minimal contact , allowing painted, stained or glued projects to be completed in one session with less mess and great results STACKABLE Lightweight design, easy to print -…
Right-angle pyramids (tetrahedrons) with different numbers of sides for the base. The apex of the pyramid is directly above a 90º corner of the base. There are two versions—one with a 3-sided base and one with a 4-sided base. This is a…
Torture test for small surface area.
Another model with no “Purpose” as such, but I think it's neat! If you like science fiction (or the history channel) you might think it's neat too… Although not very detailed, its simplicity makes it completely scalable. Anyone with an…
My usual painter's pyramids are too large to get close enough to support small items so I created this model specifically for small parts. The Large version has three points that form a 1.25" circle. The Small version forms a 1.0" circle.…
I added a bunch of 10mm x 3mm holes in the back of the holder. Depending on how many pyramids you store you might need some. Slicers can now allow you to plug the holes and make new ones to whatever size magnets you have. The back of the…
A pyramid-like version of the Towers of Hanoi. The pieces seat inside each other to make a nice pyramid-like shape. The whole thing is about 2 inches high and 3 inches wide, so it's very portable. Print as in the STL. PETG or PLA will do.…
Design Concept The model captures the majesty of the Giza Pyramids and the Sphinx in a relief style, highlighting their historical significance. Use This piece can serve as a decorative element or educational tool emphasizing ancient…
Dont forget to print the pyramid 3 times :-)
This bookmark is easily printable, uses very few filament and takes around 10-15 minutes to be printed.
New possibilities combining pyramids and cones!
This model can be used in Geometry Class to demonstrate how the volume of a pyramid can be calculated: The base area and height of the colored pyramids corresponds to the base area and height of the (transparent) prism. All three pyramids…
A practical workbench essential designed to elevate wood, 3D prints, or craft projects off your surface for easy painting, staining, and finishing. The minimal-contact tips prevent paint pooling while keeping workpieces firmly elevated.…
A small model of the famous pyramids
Painter's Pyramids Pyramid 1 - Square x Square (35x35x38x2mm) Pyramid 2 - Square x Square (25x25x25x4mm) Pyramid 3 - Square x Square (20x20x20x6mm) Pyramid 4 - Polygon (6) x Polygon (6) (20x20x5mm) Attaching STLs, F360 file and GCODE file…
Two perspective model of population pyramids
3 color HueForge Filament Painting Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Filaments used: Devil Design PLA Black Devil Design PLA Super Blue Devil Design PLA Gold Printing instructions: Until 11…
I needed something to hold a wooden box off the workbench so I could paint all the way round without the paint sticking the box to the work bench. The first set I made without the tabs, so they moved around, when I added the tabs I could…
Bring the magic of the Pyramids of Giza to life with this unique lamp! Perfect for printing and building fun, and a stunning addition to any interior. Get inspired by the timeless beauty of Egypt as you create something truly special.…
Low poly Pyramids of Giza Pirâmides de Gizé low poly Category: Sculptures
The scene is rendered in a clever 3D relief, creating a sense of depth and perspective, especially when viewed through the warm light. The iconic, stepped and smooth pyramids are the central focus.It casts a calming and exotic glow,…
This 3D model depicts the Great Pyramids of Giza featuring realistic stone-brick textures and an engraved rectangular display base styled with "EGYPT" and ancient hieroglyphics. Sliced for standard 0.4mm nozzles at a 0.2mm layer height, 2…
This is a perfect print when you're nearing the end of your filament spool. I made these for drying my cutting board. I place the cutting board on 4 of them and this allows air to dry the bottom. They stack for compact storage. I modelled…
My hollow spheres are popular so I decided to work on other shapes as well. Basically made pyramids in tinkercad going up in 5 mm increments then cut a hole inside with a pyramid that was 5 mm smaller and centered inside. The size of the…
Original model, but with the ability to hang on a pegboard! printed in pla 15% infill with tree slim support.
3D-Printed Painting Pyramids for Clean Work If you’re painting, spraying, or staining boards, moldings, or small pieces of furniture, you know the problem: By the time you get to the edges, you often don’t know how to lift or set the…
Box for Stackable Painter Pyramids. This box can hold up to 18 pyramids of the following by VCdesign: https://www.printables.com/model/1290405-painters-pyramid-stackable
This model is designed to store painters' pyramids on the IKEA Skadis wall. My pyramids are from BGS (article no. 85211). I'm not sure if it fits other brands as well. To mount it to the IKEA Skadis, simply use two of the awesome T-clips…
A practical and lightweight painter's pyramid set designed to minimize filament usage and print time. Perfect for elevating items while painting, staining, or gluing (doors, boards, craft models, panels), allowing both sides to dry…
A desk model of the Giza plateau: the Great Pyramid, the Pyramid of Khafre and the Pyramid of Menkaure, three little queens' pyramids and the Sphinx, laid out on a sandy base roughly as they stand. For history projects, Ancient Egypt…
Little stands that hold a door, a shelf, a chair or a model off the bench while you paint or varnish it, so you can do both sides in one go and nothing sticks to the bench. The narrow tips leave only tiny marks. Twelve on a plate: eight…
🇪🇬 أهلا و سهلا Welcome to Egypt! Print The Pyramids of Giza in their true setting with intricate detail! This model was developed in collaboration with Micropolitan , combining the MiniWorld3D detailed model of the landmark with…
My hollow spheres are popular so I decided to work on other shapes as well. Basically made pyramids in tinkercad going up in 5 mm increments then cut a hole inside with a pyramid that was 5 mm smaller and centered inside. The size of the…
Places Art - Egyptian Pyramids Scene 3D printable model.
