Sony WH-H910N, MDR1000X, WH-1000XM2 Replacement
Tested it on my headphones, a tight fit but will surely work. I have added working height adjustment brackets too.
- Downloads
- 787
- Likes
- 47
- Rating
- 4.8
Counting matching models…
Tested it on my headphones, a tight fit but will surely work. I have added working height adjustment brackets too.
Edit 06/07/25: Added smooth versions of the grip without the finger slots and uploaded the fusion360 files to make life easier for anyone that wants to remix, I didn't realize in all this time that I didn't upload it :( Post your make if…
This model has been ripped from the RIDE 5 games files. All credit/ support should be directed to Milestone s.r.l.
Wall mount a Verizon CR1000A router. If you don't have a M10 bolt to secure the router to the stand, a printed version is provided. I use the printed version. WIFI sign is provided as a separate part to change up the color and make it…
1:10 Ladder, steps to the roof PLA, 210°C/60°C
1:10 Roof guard PLA 210°C/60°C
The Netgear MR 1100 hotspot gets hot very easily, and shuts down. This Cooling case is designed to keep it cool even when under heavy load. A small 40mm noctua fan is attached to the bottom of the case and is powered by the USB A output…
SC77 2017-2020 Honda Fireblade CBR1000RR Mirror Blanking Plates Provided a left and right file. Printed in PLA due to short term usage. If long term consider UV stable filaments like ASA. Setting used. 0.2mm layer height, 10% infill, 4…
Spare blade for Makita UR100D cordless grass trimmer
Nach dem meine defekt waren habe ich diese Räder entworfen. Das Design ist nicht ganz frei erfunden, sondern habe mich da an welchen aus dem Internet orientiert. Das ganze ist mein erstes Modell, bei Änderungsvorschlägen oder sonstigem…
Chainguard Honda CBR1000RR '04/'07, was mandatory for racing, printed in PETG, lasted even after crashing with it. Printed at 100% infill, 0.2 layer height.
The Canyon Aeroad cockpit mount has the option to fit an action-camera-compatible mount on the bottom side. This adapter makes it possible to fit your Ravemen Bike Light there which neatly cleans up your handlebars. The light slides into…
Low profile wall mount stand for the CR1000a wifi router. The stand is 155mm deep, 80mm high and 120mm wide. The is a whole in the bottom for the M10 bolt to hold down the router. The two mounting holes are sized for #10 screws. Recommend…
Messercheibe für den Smart Sileno von Gardena 19060 R100LIC für 5 C-Klingen 5x M5 Mutter selbstsichernd 5x M5x10 Linsenkopf Gedruckt in ASA CF10 Carbon Blade disk for the Smart Sileno from Gardena 19060 R100LIC for 5 C-blades 5x M5…
Good luck to everyone and good printing
About model Optimised and prolonged inner handle for Mitsubishi Delica's sliding doors. Made for a friend's offroadsafari.cz orange Delica. ASSEMBLY ! You need to put your original steel nut into plastic insert first, rounded side in.…
This is a high-performance, integrated Garmin mount specifically designed for the Syncros ST-R100-AL stem. It mounts directly under the stem faceplate for a clean, aerodynamic "pro-cockpit" look. The geometry is specifically optimized for…
The watch strap for my Timex fell apart and i needed a new watch strap. I found richmitch watch strap and liked the design. Sadly, it didn't fit my Timex so i decided to make it fit. I had to redesign both ends and i kept the pattern…
Remixed Belt Guides to make them fit for my Sparco R100 seat.
Remixed brainzels thing https://www.thingiverse.com/thing:3552714 in order to support the Husqvarna Automower wheel brushes (PartNumber 505132803 (Kit) or 581982002 (only Brushes)). Can be printed w/o supports. No modifications on the…
Endcaps for Ironridge XR100 extruded aluminum rails used for mounting solar panels. left and right included. I recommend PETG or some other UV/weather resistant material, also consider where these will be used and what temperature they…
Required accessories: 1 x M5 Screw; 60 to 80 millimeters 4 x M3 12 millimeter 1 x M5 hot melt nut 4 x M3 hot melt nut 1 x M5 nut Locktite and plastic glue ¼ " screw Print settings: PLA 0,4 mm nozzle 0,2 mm layer no supports best 4 or more…
Because the original rear wheels of Neato and VR100 are very hard they make a big noise on tiled floor crossing the gaps between the tiles. If you print the attached file with white TPE and replace the hard wheels with the new ones, you…
These are models for the two little wheels in front of the Vorwerk 100 vacuum robot (just behind the roller).
shortened VVER1000 fuel assembly for LR-0 reactor
The dirtbin by LazyOdin fits perfect in my VR100 robot but looks a bit strange. That's why I added a lid to cover the whole bin bay. Like the source by LazyOdin it also uses the roomba 880/900 dirt bin filter. Edit: After four months of…
the r100 is a small camera and a grip felt like a necessity, this one is great however my fingies dont fit so i reverted the grip to the original smooth one while retaining the changes to the mount screw and battery cutout.
I just designed this cylinder surface to try Spiral Printing. Its 200mm x 200mm so you have to scale into desired proportion. Just 1 perimeter. It can be used for circle calibration. Print Settings Printer Brand: Prusa Printer: Prusa…
Simple holder for the GraphGear1000 Pen. Can be mounted to a flat surface using double sided tape. The tip of the pen has to be retracted to fit into the holder. Prints without supports/brim.
EDIT: The first version I uploaded should work with a bit of filing or sanding. The issue is that the thread engaged into the carburetor is too long. The base of the thread sets the most retracted position of the choke needle. Mine pushes…
Citizen Eco-Drive AW1150-07E WR100M Replacement Watch Straps Meant to be printed with TPU Print them laying flat on the build plate No supports needed To finish assembly you need all the original metal pieces from the old straps just…
Material doesn't matter. This one was printed with R-PLA from Fiberlogy.
Support de tournevis VARO – Support vertical avec rangement embouts Support spécialement conçu pour le tournevis électrique VARO VAR10080/25 . Idéal pour organiser ton poste de travail et garder tous tes embouts à portée de main. ✅…
I designed this case riser for my Thermaltake TR100 to improve cooling and also direct the air out on a specific side. I felt there was a lot of “stagnant” hot air below the case which often was blew towards my keyboard and it didn't feel…
Because xecutor was so kind to attach his OpenScad-File of his wheel I was able to modify this wheel (even if I'm not so familiar with OpenScad). It now can be mounted on Vorwerks VR100 in the same direction like the original wheel,…
Das ist das Innenleben für den Schalldämpfer für das Gewehr SR 1000 S. PLA, PETG & TPU möglich. Eine Große Druckkammer um den beginnenden Schall auf zu fangen und weitere kleine um den Schall weiter zu schwächen bevor er austritt. Ist für…
HueForge Honda Fireblade/CBR1000rr This was my first HueForge and first upload - it's a photo taken of me riding my Fireblade at Fish Hill. Please feel free to use it for any motorbike fans in your life. The instructions are for BambuLab…
replacement side panel tab for Honda CBR1000F. these often get broken and lost causing loose side panels. Print in ABS, coat in plasti-dip rubber coating or similar. 2 versions of the file: one is a copy of the original tab V2 has extra…
I built these so that I could sandblast an engine that I am rebuilding. These may need a bit of drilling on the screw holes to make them fit, depending on your printer's accuracy. Mine bolted right up, but it was a tight fit. The thicker…
The stock side brush belt of the VR100 and Neato vacuum cleaner robots tears off after about two years. This part can replace the defective belt. Printed with printable rubber the belt will never rip again. Print Settings Printer Brand:…
I designed this to replace a missing Ironridge XR1000 rail end cap. This part is used on my ground mount solar array. There were already XR100 and XR10 rail end cap designs, but I could not find one for the XR1000 so I designed one…
Wall support for TP-Link MR-100. Need to secure this router to a wall, so i made this design. Is not slim fit, have no need for that. Uses a M4 screw on the top, no need extra force. Printed with this settings: - Layer heigth: 020mm-…
It is designed for 2 or 3 9 x 18 x 5mm magnets designed
I had to undo a “custom” rear subframe and I was missing the seat lock. Tested on 1993 BMW R100GS. Should fit other 247E-framed BMW models as well. That part is no longer available from BMW directly. And it is not that comlicated. It…
hihihihihiihihiihh
NEW ITEM ACQUIRED! Item Name: The "Stop Being a Clumsy Noob" BMW Airhead /7 or Whatever Tank Throne Quality: Uncommon (Because you actually used logic. Mostly.) Description: Oh, look . The Owner has evolved past utilizing raw timber for…
I got an used VR100 as spare parts donor that was completely intact apart from a broken display and a the missing green handle that you need to lift the dustbin. So I re-created that little piece to complement the dustbin. Update: added a…
Of course, cats are cute. But two of them with much, much fur killed my vacuum cleaner robot meanwhile three times. There is a constructive issue on the main brush motor. There is a wide gap between the motors case and the output drive…
Just a quick bracket that i designed for conversion of your hall style ignition to the Enduralast digital ignition. Feel free to change it to suit your needs, its a press fit (so it wont vibrate out) I printed this in PC. (for heat…
Curved train track piece. Female to male connectors. 30 degrees, R100mm. Fits standard wooden train track sets.
After a few years of undeniable joy my "IR100" (made by Hama) Internet Radios buttons became more and more sticky (silicon surface). I designed these buttons to replace the original ones which can be removed by gently pulling them off…
Cambridge Audio AXR100 remote holder with room for 1.26 inch x 1/8 inch disk magnet 1.26 inch x 1/8 inch magnets Printed on a MK3.5S 0.6mm nozzle Orca Slicer 2.3.0 0.35mm layer height textured powder-coated Print Sheet
Its just a simple Mount for LED Signallight on an BMW R100GS. M8 Mount.
This is an adapter for the google fitbit air to fit casio wr100m watch
A stand for a Tascam DR100 field recorder on it's side. It has enough height for Micro USB to be plugged in while in use. Maybe a little too chunky for some people, but I wanted it to be durable. This may fit other field recorders or…
Model of power distribution in nuclear reactor core (mockup VVER1000/LR0) Print Settings Printer Brand: Prusa Printer: i3 MK3 Rafts: No Supports: No Resolution: 0.2mm Infill: 0% Category: Math Art
Curved reversible train track piece, compatible with standard wooden style tracks. Female-to-male configuration, 90 degrees, radius 100mm from center.
Brake cushion for Land Cruiser Part number 90541-06063 Print in PETG to increase durability
Dieses Teil ersetzt die Gummikappen am Aux- und Netzanschluss. Passt auf mein BMR100. Ob es auch für andere Radios von Makita passt kann ich nicht sagen. Gedruckt wurde mit TPU.
30 degree curved female-to-female track. Radius 100mm. Fits standard wooden train track sets.
This a lid for Weck Jars with 100mm opening, friction fit. I initially designed this lid to store and display small giveaway items at fairs and swap meets. The wood pattern seen in the photo is wood modifier by jattie , please see his…
I needed some intake boots due to cracking and having vacuum issues with my 1991 motorcycle. The parts would need to come from Japan and would take 2 month minimum to arrive. I had made this model completely on my own so it only has one…
This USB Dongle Organizer / MicroSD and SD card holder will fit snugly on the side or top grills of Thermaltake's TR100. IF they fit on other ThermalTake cases, Let me know! I'm including the STEP file of the grill pattern in case you…
Zur Montage des Zylinders müssen die Kolbenringe komprimiert werden, damit der Zylinder aufgesetzt werden kann. Es werden 2 Ringe benötigt. Besser jedoch 4 Stück. Das macht die Montage noch einfacher. Bei der Verwendung von 2 Ringen…
Snap lugs in the tray of the dust compartment on a Vorwerk Kobold VR100 vacuum cleaner robot were broken, so it was not possible to use the cleaner anymore, which was otherwise still working fine. There are no official solutions and it's…
Curved track piece with double male connectors. 30 degrees, R100mm. Fits standard wooden track sets.
Recommend PETG Material Print with Support x2 per Set is required
This compact mount gives your VARO Var10080/25 cordless precision screwdriver a dedicated spot on the IKEA Skådis pegboard. Slide the screwdriver in from the top and it stands upright in the holder, with the inserted bit sticking out…
I designed a small, space-saving box for my power drill that’s ready to use right away, where I can store both the drill and its bits. The lid can be locked with a magnet and doesn’t take up much space. I printed it on my 3D printer using…
A synchronization tester for a 2-cylinder boxer engine (R100GS), built with an Arduino Nano and two pressure sensors (5V, MPXH6115AC6U). The reset button is accessible externally to reload the program at any time for a neutral…
A mount for a Hella (HELLA LED Lightbar Black Magic Zusatzscheinwerfer 6,2 Zoll mit Zulassung) auxiliary headlight on a BMW R100GS. The mount clips onto the crash bar rather than being screwed on, making it easily removable. It needs to…
Printed with ABS, 100% infill. Could be PETG or ASA but I haven’t tested it. If the filament is susceptible to shrinking or expansion then allow for it in the slicer I found it to be a little too snug, but a tap with the hammer put it in…
Overview This is a functional replacement for the factory plastic seat mounting bracket/insert used on 1990s BMW Paralever Airhead roadsters. Over decades of heat cycles and vibration, the original BMW nylon inserts become brittle and…
This is a high-performance, integrated Garmin mount specifically designed for the Syncros ST-R100-AL stem. It mounts directly under the stem faceplate for a clean, aerodynamic "pro-cockpit" look. The geometry is specifically optimized for…
Support de tournevis VARO – Support vertical avec rangement embouts Support spécialement conçu pour le tournevis électrique VARO VAR10080/25 . Idéal pour organiser ton poste de travail et garder tous tes embouts à portée de main. ✅…
Dieses Teil ersetzt die Gummikappen am Aux- und Netzanschluss. Passt auf mein BMR100. Ob es auch für andere Radios von Makita passt kann ich nicht sagen. Gedruckt wurde mit TPU.
NEW ITEM ACQUIRED! Item Name: The "Stop Being a Clumsy Noob" BMW Airhead /7 or Whatever Tank Throne Quality: Uncommon (Because you actually used logic. Mostly.) Description: Oh, look . The Owner has evolved past utilizing raw timber for…
Recommend PETG Material Print with Support x2 per Set is required