206 models
My uncle and my little cousin recently got into model railway again. Since it is not very easy to put these H0 gauge trains with 3 el. conductors onto the tracks, I designed this little aid. You put the aid onto the track (in my case…
einfaches Geländer für die H0-Modellbahn - einfacher Druck
In the MG4 there is the Problem, that, when you drive curves fast, the Mobile phone can fly away from the Mat. This railing keeps it safe. Print in PETG or ABS, because of the temperatures in the Car in Summer.
Flowerpots/Planters to fit between the rails of our balcony railings. OpenSCAD file is included so you can easily make it fit yours! There are two variants of the pot (measures in mm ): a smaller one that fits between two rails:…
This model consists of the railing portions of the Apollo Launcher / Umbilical Tower used to launch the Saturn V rocket. This is part of the Apollo Umbilical Tower model. See the parts spreadsheet of that model for a complete list of…
This is a custom written G-code file for printing miniature railings for the Revell 100th anniversary Titanic set (scale 1:400). I did not like the original as it was not too realistic. You can read the code yourself in notepad or any…
Duplo compatible railing/fence generator in OpenScad. You can easily tweak any parameter you want. Turn on or off middle cross-section or Y offset. Make it extra long, short or high or without vertical planks. Original Duplo brick…
This is an add-on set of Railings and Rain Gutters for the 1/60th scale Mobile Launch Platform MLP/LUT model. These are installed on Level 0 around the parameter of the deck. Glue the railings to the outside edge of the top decking.
Three railing compatible with Zone Mortalis platforms (4mm). 48mm long single 48mm long with some tubes 68mm long single I printed theses with a resin printer. They are too thin for filament printers.
A 3d scan of a cast iron ornament for gates scanned with a creality scan ferret please print with supports everywhere
In Teile zerlegt, um den Druck auf fdm-Druckern zu erleichtern. Die Teile müssen zusammengeklebt werden / Spitted into parts to make it easier to print on fdm printers. Parts have to be glued together
A set of railings that fit to replace missing railings on a PlaySkool 1991 model doll house. Needs supports 20% infill .20 mm resolution
Using my prusa mini to make my lady happy :D (once again) Wooden rods: https://www.amazon.es/gp/product/B082QTRNC6/ref=ppx_yo_dt_b_asin_title_o01_s00?ie=UTF8&psc=1 Update: I recommend you to use some glue to hold fix the stick to the…
Originally printed the railing from the original design but it was a little too fragile for my kids. Designed this one to be stronger. All I did was glue it around the circumference of the platform as the holes were full of plastic from…
5 parts that extend your MN-128 RC Rock Crawler front axel by 5mm to make room for larger tires. The servo mount is designed to be modular and adapt to different servo sizes. I have these on my Etsy store:…
Einfache Aufgleishilfe, es wird Support benötigt, kann auch über eine Weiche verwendet werden Simple rerailing aid, support is required, can also be used over a turnout Category: 3D Printing
Filament: PETG Print orientation: Horizontal with support. Min 12walls 100% infill
Here are the railing, pillar, arch and beam pieces for the magnetic tile haunted house. General information for all these pieces: PLA Filament Layer height 0.2mm Infill 15-20% No supports needed (see recommendations for brims below)…
Merged and resized so I can print multiples in one go. smaller for size as well. The back is slilced so that it can be printed flat in one go on a printer. Wider version that matches the width of the girder…
This hanger is custom designed for the aluminum railing on our deck. It is a single print and snaps into place. Supports are needed on the baluster clip. The railing has the following dimensions that apply to this design: Railing: 35.2mm…
Join to Unlock All STL Files FOR FREE: https://starforgekits.com/ StarForge Kits is the largest producer of STL files for 3D printing. We specialize in true-to-scale models, especially in 28mm. All models are correctly scaled and easy to…
Add your own custom logo to the back of your vespa GTS with this clip. The clip is printed in three parts The clip itself (Should be printed from PETG with 3 perimeters) The logo holder The logo (in this case an apple logo or a vespa…
A common upgrade for 1st gen MINI Coopers is to swap out the steel trailing arms for the cast aluminum arms on the 2nd gen cars. In order to continue using your first gen speed sensor that inserts into the new trailing arm, you need a…
This is just a quick replacement for the handrails from the Playmobil Dollhouse 70891.
Dies ist ein einfaches Geländer in H0 Größe (z. B. für Brücken).
Trellis/railing holder / Halter für Rankgitter
It is a remix of the original spoolholder that uses printed roller arms and springs to press the spool down. To improve the stability of the arm, the profile was divided into two halves, the lower one containing the bushing and separated…
Friend of mine builds railings for offices and homes. Mostly in stainless steel. A post, a mounted cylinder with Ø12mm pin. Stainless tube on top and weld it. Now the purchased jig was worn out and he needed replacement. As the…
4 parts, glued together CAD Model: https://cad.onshape.com/documents/841ac78b5130b0b2708a7109/w/418d48fb317b9dffb41e2527/e/f111d9d5fadbcaf2e4770d9f?renderMode=0&uiState=6570db5f15a438445618ca4b
This is a simple old timber set of rails that you can use as you like in your model scenery creations. Having built scalecast ( www.scalecast.co.uk ) over the past 12 years, I love making 3d stuff and just want to keep sharing stuff to…
This are endcaps for a balcony railing to prevent wasp building their nest inside the steel tubes. Rectangular Version: Size: 50 mm x 30 mm (outside), 45 mm x 25 mm (inside) It is designed to fit into a 50x30 profile with 2 mm wall…
This consists of the Railings for the MLP. This are part of the larger Shuttle Mobile Launcher Platform model.
Railing for scale models of ships (3 options). The diameter is 1 mm. The length is 10 cm. Bends in place by slight heating. PETG is better to print because it is more elastic.
Aufgleisungshilfe für Spur G mit Langer Auflage Sie ermöglicht das einfache Aufgleisen von Wagen mit Drehgestellen und mehreren Radsätzen. Rerailing aid for G gauge with long support It enables easy rerailing of wagons with bogies and…
This is a simple railing add-on to an existing track piece when used as a bridge part. Two variants provided for the two standard track piece lengths; 13cm and 19cm. Holes are suitable for 3mm screws. Drilling needed in track part to…
FINGER BOARDS ONLY!!! this is a ramp and a rail all in one so you can do tricks
While I was building my first Dollhouse I found some leftover pieces of plexiglass laying around. I designed some poles and just like that I got some cute balkony railing for this dollhouse. The poles can be screwed to the dollhouse with…
My wife wanted a quick and easy way to string up some xmas lights on the front porch railing. She found some plastic clips online, and of course I immediately said “I can do better than that!” I modeled these clips from scratch in…
Join to Unlock All STL Files FOR FREE: https://starforgekits.com/ StarForge Kits is the largest producer of STL files for 3D printing. We specialize in true-to-scale models, especially in 28mm. All models are correctly scaled and easy to…
Small hooks for hanging trailing plants on walls.
Baluster Connector for aluminum deck railing balusters.
There are three versions 2x3 cm 3x3 cm 3x5 cm the photos are currently with red filament because the white is still being delivered
Works really well. With two of these you can mount umbrellas with a cylindrical main shafts onto your balcony railing. The railing has two have two or more horizontal rectangular bars whichs inside edges line up vertically. Rubber inlets…
I made this piece to finish off my custom deck railing using painted electrical conduit. This is designed to be held in with #8 wood screws. Printed in ASA at 4 walls and 15% infill on my Voron 2.4 350mm
1:48 Scale Concrete Steps with Metal Railing
EN: With this adapter, an Ecowitt WS90 weather station can be mounted on pipes or railings up to 45mm in diameter using a standard M8 pipe clamp. The adapter has a diameter of 25mm and a recess especially for the WS90 power connection…
You screw the bottom connector (u shaped) into your top and bottom 2x4 of your railing, slid two tops onto the the baluster facing oposite directions, snap the baluster into the u-shaped connectors then screw the tops onto the u-shaped…
I designed these brackets to fixate the bird feeder having a 70x70mm wooden pole at my railing in winter time. Basically you can use just 2 screws for each bracket if you want to remove the pole more often. But additional 2 screws can be…
I used this to replace the balcony flower pot attachments for balcony railings that were lost over the years. Slices well, at least in Cura. The size of the mesh should be 16.8 x 64.3 x 12.2 mm. Print Settings Printer Brand: Snapmaker…
Merged more sturdy rail from @FuncPrintGuy_175668 with the original rail from @kth0. Liked the more sturdy rail but wanted the pins for assembly. Print settings don't really matter for this one but here's what I used: Print Upside down…
Instruction manual There are no instructions
Roof/Railing Patch -Repair _____________________________________________________________________________________________ This Customizable patch can repair your broken corrugated roof or railing. You can set your own dimensions with FCStd…
UPDATE 9/15/25 A user did a test print and found the old model sizing was off, I've remade the bushing to exact fit per his measurements so it should be good now, if you downloaded the previous version you'll want to redownload the new…
The modular porch rail planting system lets you artistically and safely add garden space to your existing deck or porch railings. The system consists of “platforms” that fit onto the railing, and the platforms expose a stylized French…
General This clip was designed to pin clothes to a bar, such as a balcony railing. It is supposed to keep the clothes from being blown off on a windy day. The included .3mf file was designed for a tight fit of a 100mm railing, but you…
Fishing rod holder for mounting on a vertical railing shaft with a diameter of 25 mm, as often found on sailing boats. The fishing rod can simply be slid in and is hold with slight tilt. This means that the rod can also be used as a…
VW Tiguan 1 railing clip (N0200321) TPU A95 layer 0.2
CROW & BIRD REPELLENT FOR BALCONY RAILINGS Here is a simple solution to get rid of crows and other birds which perch on your balcony railings and wake you up early in the morning with their noisy voices or dirty your balcony with their…
Constructing these I/T beams can be tricky as sometimes lumber is warped a little bit. These jigs can be used to ensure the beams are always in the right place as you construct them. Instructions for using this jig: Fit the boards into…
This probably won't be of any use to you if you don't have a rail with the same dimensions as mine (see the photos and images for specific dimensions in millimeters), but for the sake of posterity I have decided to upload these cad…
Printed with these settings: 3 walls 5 bottom and top layers 0.2 mm PETG
Mount a 3x4" downspout to a hand railing Details fits hand railing width 40mm vertical railing supports must be ~8-12mm in diameter includes zip ties routing around vertical railing, though not required Print Settings Fits on a Prusa Mini…
Summary Assisting bracket for mount of parasols on balcony railings using zip ties, which enables stable mounting and reduces the need to turn the parasol. Dimensions Diameter of the pipe: 25,4mm (+- 1 mm) Maximum ziptie width: 6mm fully…
A large staircase with railing for fingerboards.
Railing for my Oscar platform. Designed to be printed in resin. Can be added to platform and printed as one piece. You will need a steady hand to paint it as an assembly.
Fixing wedge for Ebertsankey railing flower pot --- If you'd like to support my work https://www.buymeacoffee.com/bitn
Háček na odtokovou hranu pro uchycení krytu kabiny pomocí gumičky.
This pot will fit between the rails on a fairly standard apartment patio railing. The vertical rails need to be ~87.5mm apart with a depth and width of ~13.5mm. You can easily slide the mounting part of the pot between two rails while it…
This planter is designed to be used with trailing plants like ivy. The holes in the spool halves of the Prusament spools are perfect for the tiny roots of the plants to grab onto. As a bonus, the pot can accommodate an empty pot of 500ml…
A clean, modern modular fence system featuring solid low base walls, square pillar posts with capped tops, and dual horizontal tubular rails. Perfect for contemporary architectural models, urban dioramas, park borders, and tabletop gaming…
Holder for steel profile 15x15mm Material: ASA
My first attempt at editing an existing 3D model in Tinkercad. It came out as I hoped, now to find some rubber and zip ties to mount it on my bike! It works fine! With no dampening, it swings around and does splash some cola out over…
Fixation part that can hold flower boxes on the railings. Fits on Parkside PreZero (from LIDL) or Ebertsankey Mediterran (from OBI). I recommend printing in PETG, 0.2mm, 20% infill.
A simple hook design for a common sized metal railing found around my work place. Designed to clip to a metal railing measuring 1.5" wide at the top and 0.75" thick.
Trex Signature series railing mounting brackets. Includes top and bottom. Parts are designed to be used as a full set replacement, not a replacement for individual existing parts. .20mm layer No supports required Recommend ASA, ABS or PETG
Trying to learn FreeCAD. It's capable and probably the only viable option for a hobbyist. But it's hard work to (re)learn! So this is not a very polished model. Please feel free to build upon it and/or give me feedback. This is a mount…
This adapter can be used to mount a WeatherFlow Tempest weather system on horizontal pipes up to 45mm in diameter using a pipe clamp. In addition to the adapter, a suitable pipe clamp and an M8 threaded rod as well as an M8 nut and a…
Flag holder for the balcony railing (mounted on the top of the railing). For 20mm flag stick. Fastened with screws and nuts or plastic cable ties. Infill density: 20% Bed temp: 50C Nozzle temp: 200C Without support. Hole for flag: 22mm…
Just a holder for my velux remote on my railing. Story: https://www.tiktok.com/@thomaskekeisen/video/6895010028969938178
Geländer und Sitzstange für ein Vogelhaus. Lochdurchmesser für Befestigungsschrauben 3 mm Vielleicht auch noch für andere Dinge brauchbar. Liegend gedruckt mit Stützmaterial für die runden Stangen. Für die Anwendung im Außenbereich…
I used to wrap my Christmas lights around the railing beam, but now I just clip these little prints on and hook the wire. Easy to use and cheap to reprint next year. I think the 3×3 cm beam like I have is the most widespread, but I also…
Inspired by wooden planters sold at big box stores, as well as wanting a cohesive look for my garden and more space on my balcony, I made these repurposed pallet wood planters to hang over my balcony railing. List of Components: Pallets I…
Launch Complex 34 was the site built for the Saturn 1 and Saturn 1B launches. Only 1 manned Saturn/Apollo vehicle was actually launched, the rest being test launches of the various Apollo mission components. It was also the site where the…
This rounded clip holds Optix 0.09" plexiglass vertically, and is intended to be screwed to plywood. This is currently being used on an overhead HO scale model train track, to prevent derailments from becoming something truly horrific --…
A simple, sturdy balcony railing mount designed to get a Starlink dish outside with a clear view of the sky without drilling into the building. I designed this specifically for mounting a Starlink Mini to a balcony railing. It has been…
Railing support 25 mm top adapter. Print in ASA for UV resistance. Sand and smoothen the top with acetone, if needed. Use 5+ walls for strength. For a clean top, print as is, with supports. Print outer walls first (or vv) to reduce outer…
This sub-model consists of the floor grating and rails for the LUT Cross Section model. Note: Many of these parts are best printed with a 0.2mm nozzle.
A railing for soda can tank ( https://www.thingiverse.com/thing:2481387 ) from YTYTHETHINKER creation. Category: 3D Printing
material: ASA layer height: 0.2 number of walls: 6 number of ceiling + floor: 6
We recently took our twin girls to an outdoor storytime for kids at a local bookstore. While we were there, I noticed another family hauled their kids to the performance in a Radio Flyer All-Terrain Steel & Wood Wagon. We currently own a…
A big windstorm blew off several post caps from my outside decking. Some were lost, others were damaged, basically I was short 6 post caps at $12/cap. I spent a little time in F360 to come up with this replacement cap. This is designed to…
To create an additional laundry railing for the radiator, you will need: a piece of PVC pipe with a diameter of 20mm and a pair of bolts with M4 nuts.
This is a high-strength 3D-printable angled wedge clamp designed for standard 40x20mm metal balcony railings. Purpose: Securely hangs lanterns, hummingbird feeders, or small planters outside, without scratching or damaging your railing.…
If you want to combine a basket with the usage of panniers (for example by Ortlieb), this might be the solution. This is an extension to have a second railing on a given luggage rack which doesn't have one. Tested in combination with…
Simple clip to hold an 11mm hose in place, clips to the edge of a Emsa/Poetic Casa Mesh balcony-railing-pot. Great for drip-hoses and automatic plant-watering systems. There are two versions standard and simple, the simple one should be…
Created a small bamboo holder to securely hold the bamboo trellis instead of having so many zip ties to secure it onto a parapet railing. Singapore HDB BTO
Attaches an Aeotec TriSensor to 13mm square profile railing/balusters. Use M2 screws with the wall mount included with the TriSensor. Also includes a 3d-printed grub screw to allow you to slide the clamp to the height you want and then…
These are three different shoehorn holders for mounting on 34mm tubes. Two M3x10 screws with a maximum head diameter of 5.5mm are required for mounting. The 27mm wide version in particular fits perfectly for a widely used strongly curved…
This is a tray holder in the form of steps with bicycle railings. It has a cool and fashionable look suitable for table top use. It consists of two coasters that can be used for drinks, and can hold small parts for just about any small…
