Search results: rand

Sort order

2,431 models

P
PrintablesExtrutim

Filament Clip | Grandma's Favorite Filament Clip

A simple filament clip which prevents the filament from unwinding reliably! I've tested many filament clips in the past, but couldn't find one that I was 100% satisfied with. Out of this need I have designed this small clip! Since I read…

Print approx. €0.07–€0.08 excl. taxPreliminary estimate for one variant

Downloads
156,735
Likes
33,578
Rating
4.86
P
Printablesmarroquino

Car brand's Logo (BMW,Mercedes,Toyota,Citroen,VW)

In this model we have the top 5 car brands sold in portugal. This design is just wall art althought it can be used for other purposes. Download your car logo and stun everyone with your 3D print! More car brands will come in the next…

Print approx. €0.39–€0.48 excl. taxPreliminary estimate for one variant

Downloads
311
Likes
9
Rating
0
P
PrintablesLNPprints

VW Grand California 600/680 Sieb - Sinkstrainer Volkswagen

The remixed model fits snuggly and does not “swim” or have any uplift, in the sink or shower of the VW Grand California 680 Van. It also sits flush with the surface of the sink bottom. The original seemed a little to high, probably…

Print approx. €0.15–€0.19 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
135
Likes
4
Rating
0
P
PrintablesRJ

Drive mode selector cover for WK2 2011-2021 Jeep Grand Cherokee

My little dogs push the buttons and upset my jeep. This cover stops that. It’s a tough print, and may need some tweaking because the “clips” need to be small enough to click in, but are also fragile. I would print vertically because it…

Print approx. €0.59–€0.72 excl. taxPreliminary estimate for one variant

Downloads
124
Likes
9
Rating
0
P
Printablesgeorgestephanis

Grand Inquisitor Badge / Kenobi / Star Wars

As seen in Episode 5 of Kenobi! Included gcode has two stops -- start as a silver/grey, switch to black, then finish in a red.

Print approx. €0.94–€1.15 excl. taxPreliminary estimate for one variant

Downloads
115
Likes
20
Rating
0
P
PrintablesFranziska

Vitamin effervescent tablet modular holder/stand. Very small print. Fits most brands.

My effervescent tablet tubes kept falling over on the shelf, so I just needed something simple to keep them standing up. I remixed an egg holder to fit the purpose, allowing me to add as many holders as I need in various configurations. I…

Print approx. €0.28–€0.35 excl. taxPreliminary estimate for one variant

Downloads
107
Likes
16
Rating
5
P
PrintablesVINC3D

■ GEWÜRZGURKE | grandma's christmas pickle

Good settings: 0.4 mm nozzle 0.2 mm layer height random seam position no support no brim 70°C bed temperature fuzzy skin outside walls 0.2 mm fuzzy skin thickness 0.4 mm fuzzy skin point distance Prusament PLA Pistachio Green

Print approx. €0.87–€1.06 excl. taxPreliminary estimate for one variant

Downloads
102
Likes
14
Rating
0
P
PrintablesDamir Perisa

Touchless Carabiner (by Oscar Miranda) 110 % sized

trying different tools helping not to touch buttons and levers. the touchless carabiner looks promising, but it was too small for my hands, so i increased it to 110 %. Print instructions see gcode file below - no supports, no rafts, no…

Print approx. €1.34–€1.64 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
50
Likes
2
Rating
0
P
PrintablesMarcinPaska

For My Beloved Grandpa

I wrote this poem after the death of my beloved Grandpa. A wonderful man who gave me everything, but most of all, he gave me love. In this poem, there is a constant, immense, deep longing for my Grandpa. I would like to know the answers…

Print approx. €8.91–€10.89 excl. taxPreliminary estimate for one variant

Downloads
40
Likes
33
Rating
0
P
Printablesjryanhamilton

Haba Brandon the Brave Component Tray

This is a component tray for the pieces to the Haba game "Brandon the Brave" in english. It is a fun little kids game, and I wanted to keep the pieces more organized and not just have them travel around in the box. There is space for the…

Print approx. €16.05–€19.62 excl. taxPreliminary estimate for one variant

Downloads
5
Likes
0
Rating
0
P
PrintablesNils Kal

Desk Stranding - The Death Stranding Desk Lamp

I'm currently playing death stranding on my PC and came up with the idea of recreating the „Odradek“ scanner as a desk light so I'd like to present you the "Desk Stranding" lamp (thanks to reddit user u/Typh_R who came up with the name).…

Downloads
13,480
Likes
8,420
Rating
4.94
P
Printables3DeeMagic

Unbranded TIC TAC Gun 2

Introducing the unbranded version of the amazing TIC TAC GUN 2 by dylcro2! How to build: Install a standard pen spring on the little tab near the back of the gun. Place the 4mm spring barrel into the slot. Line up the trigger with the…

Downloads
4,658
Likes
1,583
Rating
4.86
P
Printablesalecs.form

Twisted vase with strands

Twisted vase with strands. An experiment on introducing stiffness into a thin wall structure by adding strands of filament on both sides of a shell. The shell itself is a parametric modell, the strands are attached to specific points in a…

Downloads
3,799
Likes
854
Rating
4.78
P
PrintablesLoboCNC

Easy Strandbeest

This wind-driven version of Theo Jansen's Strandbeest is considerably simpler than most of the designs posted, using only 4 basic parts for the body of the beest. The first simplification is that the leg units print-in-place,…

Downloads
3,127
Likes
428
Rating
5
P

Grandpa's Greatest Nested Star Fidget

Here's a fun design that is super entertaining to play with! This is one of my fidgets in the nested set. Be sure to check out my Three-Legged Nested Fidget and this Little Guy , too! Pro tip: Do not print this with a raft or brim. You…

Downloads
2,887
Likes
230
Rating
4.79
P
PrintablesNinja3dPrinting

Oni Cyber Punk Mask by 3DPrintGeneral original post SeanAranda

Oni Cyber Punk Mask by SeanAranda From Thingiverse. Posted here due to Thingiverse losing popularity and Creator being MIA for over a year. I have also added the remixed version that is preassembled. A brilliant design i wanted to share…

Downloads
2,809
Likes
814
Rating
4.91
P
PrintablesMiniWorld3D

Brandenburg Gate - Berlin , Germany

🇩🇪 Willkommen in Deutschland! Welcome to Germany! The Brandenburg Gate ( Brandenburger Tor in German) is an 18th-century neoclassical monument in Berlin, built on the orders of Prussian king Frederick William II. Throughout its existence,…

Downloads
2,735
Likes
357
Rating
4.91
P
PrintablesMichal Fanta

Racing Circuits - Let's build all Formula 1 Grand Prix tracks

Racing circuits building kit This is a part of a kit of racing circuits for all fans of motor racing, especially Formula 1 fans. Build all the Formula 1 Grand Prix race tracks. There are more than fifty different roads available. The set…

Downloads
2,695
Likes
1,826
Rating
4.89
P
PrintablesLoopForm

Grand Theft Auto - Keychain Set

Set of compact GTA inspired keychains. Design Highlights Reinforced Loop: Extra-thick attachment point to ensure the keychain survives daily wear and tear on your keys, clothes or gear Low Material Cost: Each keychain uses approximately…

Downloads
2,609
Likes
632
Rating
5
P
PrintablesDIY_CYBERPUNK

Universal Plastic Lid Hanger/Holder (IKEA 365+, Lidl, No Brand, etc.)

I had a collection of no brand silicone and glass containers with plastic lids like in IKEA 365+ containers and wanted to print one of the existing hanger models. I couldn't find much on printables but found some good examples on…

Downloads
2,500
Likes
564
Rating
4.92
P
Printablespwmodder1027

Bambu Labs Tool Box : Alt Brands

New Designs will be added as I make them. Keep an eye out for more. Wanted to include some options for branding on this box. I'll continue to add more. If there's something you'd like, leave me a comment or send a message. I will continue…

Downloads
2,251
Likes
795
Rating
4.96
P
Printablesjanth

Universal Plastic Lid Hanger/Holder (IKEA 365+, Lidl, No Brand, etc.) without Screw Holes

For detailed information, please check the original model . Please only comment here regarding the missing screw holes; anything else should be commented with the original model here .

Downloads
2,153
Likes
907
Rating
4.63
P
PrintablesPapryko0

Honeycomb-style keychains with car brand logos. part1

I designed a series of honeycomb-style keychains featuring various car brand logos. Each keychain combines a lightweight and modern honeycomb pattern with the distinctive emblem of the chosen car brand. The design is both stylish and…

Downloads
1,906
Likes
554
Rating
5
P
PrintablesMuth

Huge Moon Rocket / Grande Fusée lunaire

For smaller prints use the previous version : https://www.printables.com/model/163971-moon-rocket A famous comics character's moon rocket. No need for screw, no extra part, no support, no gluing, self assembling and self standing. This…

Downloads
1,624
Likes
366
Rating
4.91
P
Printablesdmbaio

Chiral Crystal Formation - Death Stranding

In-game model of a chiral crystal formation from Death Stranding

Downloads
1,623
Likes
225
Rating
5
P
PrintablesBrave 3D

Grandpa UP Valentine Love Heart Balloons Carl Fredricksen

Grandpa UP Valentine Love Heart Balloons Carl Fredricksen For best results and minimal layer lines, use a fine layer height (around 0.1–0.12 mm) and slower print speeds to capture small details—particularly in the face and hair. PLA or…

Downloads
1,516
Likes
562
Rating
0
P
PrintablesMaximus Printus

Death Stranding - Ludens

Death Stranding Kojima Ludens Mini Action Figure. Ludens, the company icon and mascot of Kojima Productions, as a Nendoroid Mini! This miniaturized version of your favorite Nendoroid makes for a great hanging piece or standalone…

Downloads
1,507
Likes
155
Rating
4.83
P
PrintablesMartin

Reliant - Miranda Class

This is 3D printable model of the MirandaClass NCC-1864 Reliant from the Star Trek. It is a kit. The different colored parts are separated for easier printing. Pieces of the necelles and some details need to be separated into separate…

Downloads
1,467
Likes
328
Rating
4.86
P
Printablessamudge

Super Glue/CA Adhesive Bottle Nozzle & Cap [Stick Fast/Rockler Brand]

This is a replacement nozzle and replacement nozzle cap for Super Glue/CA Adhesive bottles. It's possible multiple brands use this type, but this one was specifically modeled after the Rockler/Stick Fast brand, for the 4.5 Oz bottles. In…

Downloads
1,336
Likes
136
Rating
4.83
P
PrintablesLBcosplay

SPIDERMAN BRAND NEW DAY FACESHELL

New spiderman faceshell from the new spiderman movie, you can download the two file and print them, if you use the support block on the facheshell upside down you can print in 8 hour.

Downloads
1,333
Likes
82
Rating
5
P

Grand Piano Kit Card (1:24) with chair (open or closed possible!)

Summary This is a 1:24 scale model of a grand piano with chair in a kit / gift card style. Some characteristic details can be discovered. Even the keys are recognizable! After printing, the model can be assembled with the help of…

Downloads
1,331
Likes
263
Rating
5
P
Printablesvandragon_de

Brandenburg Gate - Berlin

The Brandenburg Gate is one of the landmarks of Berlin and one of the most important symbols of Germany. It stood like no other for the division of two states and became a symbol of unity. Its history, however, dates back to the reign of…

Downloads
1,292
Likes
134
Rating
4.93
P
PrintablesPorta 427

1/64 model car wall display (branded)

Design Concept 1/64 Hex Display Shelf Show off your 1/64 collection in style with this custom 3D-printed hexagonal display rack! It holds 9 cars in a unique honeycomb layout, topped with a bold brand logo. Perfect for collectors who want…

Downloads
1,275
Likes
527
Rating
0
P
PrintablesJAKU

Car brand logos

Cca. diameter 63mm Write a comment if you would like to edit something on the model.

Downloads
1,241
Likes
179
Rating
5
P
Printablesicefox

Grand piano with moving parts

I love Larrym95's grand piano model, but the model is incomplete (no hinges, no wheels, etc.) and the designer isn't responding. So I took things in my own hands and revised the model to feature fully printed moving parts. I also made…

Downloads
1,237
Likes
205
Rating
4.17
P

Grandpa's Greatest Worry Stone Fidget

Let me help alleviate your stress. Did you know that stress is the leading cause of “early onset old-person death”?! It's true! You and I can remedy the situation with this easy-to-make print! I love this simple print; I've used 0% infill…

Downloads
1,188
Likes
269
Rating
5
P
PrintablesN3XT3D

Ground Screw for Automower (Husqvarna, Gardena and Other Brands)

Longer Version (13.04.2026): Upon request, I created a longer version that is better suited for loose soil. Despite its height, this screw can still be printed on the Prusa Mini. As with all models, no supports are required. Please note…

Downloads
1,183
Likes
154
Rating
5
P
Printables3dplay

BT (beached thing) from Death Stranding

Hello, this is my sculpt of BT from Death Stranding. I use Oculus medium for a sculpt. Hope you enjoy my work, and if you like DS too, feel free to download stl and print one BT for yourself. :) Here is video from creating…

Downloads
1,129
Likes
162
Rating
4.85
P
Printablesdaver18qc

1/10 Scale Toolbox (One Piece)(2 Brands)

This is a solid 1/10 scale toolbox with your choice of SnapOn or Mastercraft brand on it. Simple to print, no supports. Print it on its back, with the drawers and text facing up. You can request your own brand or text on it in the…

Downloads
1,121
Likes
200
Rating
4.88
P
Printablesdodasch

Bike Fork Seal Tool / All Diameter All Brands

Use plenty of solid top/bottom layers when printing. I used 6 solid layers PETG, then 60% full honeycomb infill and had no issues with durability. The models are all tested!

Downloads
1,001
Likes
208
Rating
5
P
PrintablesBastla Fidli

Corner pads for clamps - Action (brand) Clamps 43 x 30 mm

Clamp mounting pads for precise right angle assembly. Made for Action (brand) clamps, but this size will fit other similar ones. Internal dimensions are 30.5 x 43.5 x 2 mm. There are two sizes. The larger one for large parts has a height…

Downloads
968
Likes
484
Rating
5
P
PrintablesPapryko0

Honeycomb-style keychains with car brand logos. part3

I designed a series of honeycomb-style keychains featuring various car brand logos. Each keychain combines a lightweight and modern honeycomb pattern with the distinctive emblem of the chosen car brand. The design is both stylish and…

Downloads
966
Likes
215
Rating
0
P
PrintablesVanessa

Grand Theft Auto San Andreas Decor

Grand Theft Auto San Andreas Decor

Downloads
961
Likes
221
Rating
5
P
PrintablesMakerCameron

Full Size Tissue Box (Kleenex Brand)

Why This Remix? The author created a great model and I really liked the stone look. But unfortunately after waiting many hours for the print, I discovered it was just a bit too small for the Kleenex brand full size tissue boxes that we…

Downloads
954
Likes
129
Rating
5
P
Printablesineichen

Grandma's Angle Ruler

This print in place design contains a ruler with metric scale and more. The following features are integrated: Stencil for angles of 30°, 45° and 60° - That can be used on edges by bending. Ruler with metric scale Round holes for checking…

Downloads
949
Likes
507
Rating
4.67
P
PrintablesHappyPrinter

Doll House Grand Piano

Add a touch of luxury to any miniature building with this mini model. Its piano lid even closes! Fast print (~1.5h), no supports needed, and simple assembly with no glue . Printed in PLA. Keys were colored black with a permanent marker.…

Downloads
943
Likes
225
Rating
3.67
P
Printablesjack@meow

PARAMETRIC Key Cap Tags multiple Brands

these key caps can fit most regular key heads. Suitable for tagging your keys for quick identification or for a better ergonomics.

Downloads
906
Likes
325
Rating
4.86
P
PrintablesMZ4250

Grand Piano Mimic

Want to access even more models not found here? Interested in supporting my efforts making free models for the world to enjoy? Check out my patreon page here: https://www.patreon.com/mz4250 Patrons have access to all my files in one…

Downloads
905
Likes
73
Rating
0
P
PrintablesWernerIsDed

GrandMA3 Notebook stand

This Notebook stand allows you to place a notebook on top of the playback section of a grandMA3 lighting console. It is large enough for my 15'' thinkpad but small enough to fit on the P1P print bed. Printed out of about 110g PETG Also…

Downloads
887
Likes
47
Rating
5
P
PrintablesPhrat

fiat grande punto, punto evo rear parcel shelf clip (gancio cappelliera) left and right

replacement part for a fiat grande punto or punto evo Printing settings: Print in PETG or higher temperature material 4+ perimeters Supports everywhere print laying on its side

Downloads
869
Likes
52
Rating
5
P

Grandma's doily coasters

Intro Will future Grandma 3d print her doilies? Only time will tell! :D I had this spontaneously… just though about my and other grandparents and about things they would use as coasters. From there I modeled these simple forms that remind…

Downloads
867
Likes
244
Rating
4.9
P
PrintablesMaksym Mihovk

The ultimate spool clip that works with almost all brands

Of all the filament clips I have received and printed, I have always been happy with the filament clips supplied by Sunlu although they are not compatible with all brands of filament. That is why I've made a Filament Clip from Sunlu's but…

Downloads
827
Likes
147
Rating
5
P
PrintablesMatthijz98

Gravitrax randomizers 2/3/6 ways

Not fully tested yet but wanted to share anyway. The goal of the design was to randomize the way the marbels are coming out.

Downloads
791
Likes
137
Rating
5
P
Printables969493CD10A4

vacuum adapter for Milwaukee random orbit sander

I think the sander came with an adapter but not sure where it is. This is designed to fit the m18 vacuum, so it's smaller than a normal shop vac. There's some tuning to make the vacuum nozzle offset from the sander port, so it'll take…

Downloads
758
Likes
95
Rating
0
P
PrintablesZRex

Strandbeest

Full credit should go to @Snelon for a really great model! I spent some time scratching my head and reading through comments trying to figure out how many of what i needed in order to print my own, and thought I'd save the next person…

Downloads
750
Likes
123
Rating
5
P
Printablestig33r

Magnetic encoder mount for hoverboard wheel motor (FFBeast, OpenFFBoard) - all in one solution (drill guide, assembly guide, encoder holder), even your grandmother can do it

If you appreciate my work and like it, you can buy me a coffee ;) but this is absolutely not expected. Short introduction: The alignment of the magnet and encoder is the most critical factor for the mechanical precision of the steering…

Downloads
737
Likes
95
Rating
5
P
PrintablesSkeletalPrints

Super Grandma's Favorite Filament Clip

Compatible with the Mk4 Fillment Guide! Also, Stronger, Smother, Faster! (sort of) A more sturdy filament clip that keeps the critical dimensions of the original while taking inspiration from @alexan_e's remix to nearly eliminate friction…

Downloads
737
Likes
92
Rating
4.86
P
Printablestimetitans
18+

The source marked this model as adult content.

Downloads
725
Likes
38
Rating
4
P
PrintablesBRIM

Adapter for vinyl single records with multiple changable car brand logo

Use the file DisCore38 and put on top the car brand of your preferrence. Printing with PLA no support, 0.2mm resolution. For printig two colour version stop the first colour at 2mm of the brand logo change colour and continue to print…

Downloads
720
Likes
122
Rating
4.75
P
PrintablesSmidt Builds

Bosch 5 inch Random orbit sander wall hanger

I remixed this random orbital sander wall mount so that it fits my corded 5 inch random orbital bosch sander. The mounting holes have also been changed, so that it can be mounted with only two screws into a single wall stud. ☕ Enjoying…

Downloads
718
Likes
83
Rating
5
P
PrintablesPeter Farell

R'ong - Dragons in the Grand Imperial City of Hue

The bronze dragon was cast in 1842, in front of Duyet Thi Duong gate, Hue Imperial Citadel.

Downloads
710
Likes
199
Rating
0
P
PrintablesJorge

SpoolBox 4 all Brands with Filament Feed

Introduction and contextualization Letting the filament out in the open air is something that bothered me; having the material permanently exposed to moisture, something that won't be so bad in the area where I live. However, I felt that…

Downloads
679
Likes
537
Rating
4.4
P
Printablesseasick

Random Hexagon Wall Panel

Customizeable Hexagon Wall Panel. Print as many as you like and arrange them together on the wall.

Downloads
661
Likes
175
Rating
0
P
PrintablesMechanistic

Grand Piano Action Model

The piano action consists of a set of levers that is activated simultaneously when a key is pressed. A series of chain reactions will push the hammer to strike the rod (strings) and raise the damper head simultaneously. This action model…

Downloads
637
Likes
113
Rating
5
P
PrintablesWright4TheJob

Theo Jansen Strandbeest Desktop Mechanism

This desktop moving sculpture adds beauty and interest to the daily grind. Based on the ratios of Theo Jansen's Strandbeest creations (http://www.strandbeest.com/), this mechanism is an interactive way of visualizing the motion of a…

Downloads
636
Likes
106
Rating
4.5
P
PrintablesReal_Prints

Car logos all brands 40+

Most world-wide known car vehicle brands at one place. Same size, and colored. I have prepared a collection that is diversified, no all logos looks the same, so its more fun. Almost all brand logos can be directly printed when having AMS.…

Downloads
628
Likes
100
Rating
4
P
PrintablesNando

Stranded Benchy || Benchy Holder

Print with 0.15 mm layer height max. or even thinner layers for better results lower it -1.5 mm on z.

Downloads
618
Likes
97
Rating
3.67
P
PrintablesMKLand

Grandma Keychain

Change the color at layer 20 or 3.24mm.

Downloads
614
Likes
36
Rating
5
P
PrintablesLightBringer

Redbrand Sarcophagus

This is the sarcophagus for a 3D map I'm building of the Redbrand Hideout. The Redbrand Hideout is a location for the 5e D&D Lost Mine of Phandelver campaign. This is one of many objects I'm creating using Mike Schley's original art as…

Downloads
606
Likes
148
Rating
4.57
P
PrintablesLuvter

BB pod - Death Stranding

Modelled before the release the game from trailers and other pictures; I've already noticed some differences. I've never tried to 3d print it, if you want to try out and encounter some problems, I could try to fix them. I have also…

Downloads
605
Likes
177
Rating
4
P
PrintableseSeL

H0 1:87 allotment garden cabin with porch/veranda - "Schrebergarten" Laube mit Vordach

Print all pieces and glue it together. Use transparent filament for the porch/veranda roof for the best appearance. Door and window frame with 2x in filename will be needed twice. Can be painted before or after gluing. I printed it with…

Downloads
596
Likes
72
Rating
5
P
Printablesboothyboothy

Ivan Maranda`s Tiny CNC MK2 2080 Remix Issue 1

Ivan Maranda`s Tiny CNC MK2 2080 Remix Issue 1. Ivan Maranda has created a awesome 3D printed Mini CNC machine that cuts metal. This mini machine is perfect for my needs and provides me with many modding opportunities. Initially I really…

Downloads
594
Likes
42
Rating
0
P
PrintablesAndrew

Mini Brands Book Shelf

This is just a resized version of an existing shelf, this one fits Zuru Mini Books Brands

Downloads
589
Likes
81
Rating
0
P
PrintablesSebastianDruckt

Random Orbital Sander wall mount for 150 mm sanding discs

This is a wall-mount for orbital sanders with 150 mm sanding discs. I made it for the Menzer ETS 150, but it should work the same for Mirka Deros or similar sanders. One big benefit of this design is, that the force is on the top-side of…

Downloads
583
Likes
75
Rating
5
P
PrintablesLWC

Meshtastic Muzi H1 REMIX - 1100mAh Version (No branding+ No Keyhole + optional Buzzer+ navigation switch + Belt clip)

See changelog to see all the updates and changes I did. __________________________________________________________________________ Original Muzi text for his Original H1: Case for the Heltec V3 Lora board. Recommended to print in a Matte…

Downloads
582
Likes
145
Rating
5
P
PrintablesRadek

Sam Porter Bridges / Death Stranding

3D Printable statue of Sam Porter Bridges from Death Stranding. For changed print settings take a look in uploaded 3MF file. Uploaded Gcode contains manual fillament changes, which doesnt need MMU. For right color order put the gcode into…

Downloads
581
Likes
55
Rating
4.5
P
PrintablesVexta TOM

Brand of Sacrifice keychain

Keychain of the brand of sacrifice from the manga/anime Berserk As you can see in the picture I printed it with 2 colors making the base black and the actual brand in red, using the prusaslicers color change function. As all the detail is…

Downloads
576
Likes
49
Rating
5
P
PrintablesT3CHKOMMIE

Rope Machine 4 Strand/Hooks

Made a 4 hook rope maker for a local BSA troop. I had one of these as a kid made of wood, figured I would try to print one for others that might want to keep one in their pack. This design is 100% printable no supports. There is no…

Downloads
568
Likes
104
Rating
4.8
P
Printablesthomaspsk

Strandberg Boden Body Template

An accurate template of a Strandberg Boden guitar body, with center line and locating holes for electronics and neck bolts. For those DIYers who might want to take a stab at building their own version of one of these phenomenal…

Downloads
562
Likes
18
Rating
0
P
PrintablesPapryko0

Honeycomb-style keychains >part4< dirtbike brand logos

I designed a series of honeycomb-style keychains featuring various dirtbike brand logos and more in other parts. Each keychain combines a lightweight and modern honeycomb pattern with the distinctive emblem of the chosen car brand. The…

Downloads
550
Likes
116
Rating
0
P
PrintablesLloyd Keays

Grandma's TAGs - Favorite filament clip

Remixed of two -I used a stencil font to punch the type of filament into the tag. It will print at 0.2mm ok, but at 0.16mm you'll get better quality and surprisingly for me, it was about 1% faster ;) Print is solid - it's small and fast…

Downloads
550
Likes
92
Rating
4.7
P
PrintablesVertex

Formula 1 Miami Grand Prix Track

This is an outline of the Miami International Autodrome track for the 2022 Formula 1 Miami Grand Prix

Downloads
547
Likes
19
Rating
0
P
PrintablesING-engineering

Photo Holder-I Love Grandma

Print dit, verwijder de steun (ondersteuning is inbegrepen in de stl), voeg een foto van 4x6" toe.

Downloads
547
Likes
53
Rating
4.67
P
Printableskorean14

Keycaps "Car Brand"

🏎 Keycaps "Legendary Drive" Passez à la vitesse supérieure et transformez votre clavier mécanique en un véritable tableau de bord de prestige. Cette série de touches personnalisées célèbre les constructeurs automobiles les plus iconiques…

Downloads
535
Likes
82
Rating
5
P
PrintablesBluPhant

Forge-X branded shelf for AD5M Flashforge Adventurer 5M Printer

This shelf is designed to replace the near-worthless trim piece that is part of the offical Flashforge enclosure kit. As with the model this was remixed from, it has a hole in the center for a M4 bolt/nut to hold it firmly in place. This…

Downloads
528
Likes
84
Rating
5
P
PrintablesPapryko0

Honeycomb-style keychains with car brand logos. part2

I designed a series of honeycomb-style keychains featuring various car brand logos. Each keychain combines a lightweight and modern honeycomb pattern with the distinctive emblem of the chosen car brand. The design is both stylish and…

Downloads
518
Likes
114
Rating
0

modulo barandilla finger board

barandilla finger board recomienda hacerlo un poco mas grande de las medidas originales del modelo o al gusto

Downloads
506
Likes
47
Rating
5
P
PrintablesMMMcgyver

Elegoo Logo Branded Centauri Carbon PTFE tube guide

A propaganda logo embeded PTFE Tube guide. It pairs well with my other Elegoo branded stuff :) I simply booleaned in the elegoo logo to help with some venting. These added holes add cooling to the tube guide. Enjoy!

Downloads
505
Likes
68
Rating
4.5
P
PrintablesKepler

Filament reel trackball [fits any brand]

Turn your old empty filament reel into a trackball toy for your cat! Tracks fit any filament reel size, just use the connector to join and hide any gaps. You can use any ball that's ~53-55mm large. A heavier ball seems to be more…

Downloads
502
Likes
172
Rating
5
P
PrintablesTL3D-Printing

beach chair / Strandkorb

I hope you like the model. The beach chair has two drawers where you can store small folded banknotes for e.g. can fit in the next vacation. Unfortunately it is not yet printable in multiple colors, but this will be added later in the…

Downloads
496
Likes
33
Rating
4.25
P
PrintablesR.M Journey

Bambu Lab X1 Gridfinity Base remix without switch cutout plus Bambu branding addition ( still LED lights compatible)

Remix, no top switch cutout and Bambu branding addition. Only right side of the model was modified.

Downloads
495
Likes
145
Rating
5
P
Printablesjs500

Grand Austria Hotel and Let's Waltz Insert / Organizer - Holds Meeple Source Food Upgrades

This is an insert / organizer for Grand Austria Hotel with the Let’s Waltz expansion (retail versions of both) and the Meeple Source upgraded wooden food across the base and expansion boxes. It supports premium sleeves (Gamegenic Prime…

Downloads
494
Likes
58
Rating
5
P
Printablespavel benes

SILENT HILL BRAND

SILENT HILL BRAND

Downloads
488
Likes
56
Rating
0
P
PrintablesSlanman Customs

1:64 Grandstand

Print at .2mm layer height or lower to avoid artifacts on stairs. each piece should print flat, and no supports required.

Downloads
477
Likes
96
Rating
2
P
Printablesensoniq2k

Strandberg Boden Wall Mount / Hanger

Since commercial solutions are either overpriced or just plain ugly I designed my own wall hanger for Strandberg Boden 6 string guitars. The hanger itself is perfectly secure, but there is very little material on the head so I had to work…

Downloads
473
Likes
17
Rating
5
P
PrintablesDivideby0

Wall mount for DeWalt DCW210 20v random orbit sander

Wall mount for DeWalt DCW210 20v random orbit sander

Downloads
465
Likes
60
Rating
5
P
Printablescbmx

Death Stranding BT

crude BT without the watermark

Downloads
453
Likes
64
Rating
4.83
P
PrintablesSmidt Builds

Bosch 6 inch Random orbit sander wall hanger GET75-6N

I designed this wall hanger to fit my Bosch 6'' random orbital sander Bosch GET75-6N. It is printed in two pieces to allow it to be easily printed on most 3d printers. With the screw holes being inline with each other this can be screwed…

Downloads
447
Likes
66
Rating
5
P
PrintablesThomas

7 inch screen case 'CUQI' brand

hardware required besides panel: 4 M3x10 socket head screws 4 M3 threaded inserts Updated front part STL for improved fit. update: added a protective cover for storage

Downloads
436
Likes
32
Rating
4.5
P
PrintablesNEYLANDER

BLtouch spacer (2mm,5mm and 10mm)(off brand)

This is my first post on Prusa Printers. Print Settings: infill 45%, no supports, draft mode Just a simple spacer as I needed one hope it helps you any feed back let me know at: [email protected] want to support me:

Downloads
434
Likes
13
Rating
2.6