62 models
Chopper: Star Wars Rebels Updated (Fixed arms with .4 selective offset 10/10/2023) Thanks TrippleGWorkshop for the keen eye!!
Print approx. €29.14–€35.61 excl. taxPreliminary estimate for one variant
Any feedback would be greatly appreciated . Could be use as a planter, pen holder, etc Nozzle: 0.4-0.8mm Layer: 0.24-0.4 (Recommended) Supports needed Scale it as you like :)
Print approx. €21.96–€26.84 excl. taxPreliminary estimate for one variant
Star Wars Rebels Little Green Army Men/Women Set. Yoda Added (1/22/2026) single figure not saved on plate or part of gcode. (Print Separate) You can find the Empire Set Below in MyClub I have uploaded all the individual pieces as .obj…
Print approx. €9.61–€11.75 excl. taxPreliminary estimate for one variant
A replica of the Phantom I shuttle from Star Wars Rebels. It has foldable print-in-place wings. The scale is at 1:270 with a length of 43.1mm and a wingspan of 36mm. (The hinges are 2mm in diameter.) Holder uses a small base and small pin…
Print approx. €0.19–€0.23 excl. taxPreliminary estimate for one variant
Any feedback would be greatly appreciated . Could be use as a planter, pen holder, etc Nozzle: 0.4-0.8mm Layer: 0.24-0.4 (Recommended) Supports needed (Paint-on supports recommended) Scale it as you like :)
Print approx. €14.92–€18.24 excl. taxPreliminary estimate for one variant
Gave that away as a birthday present to 7-year old twins....therefore I needed a sturdier version that could take some abuse. I basically combined chemteacher628 awesome BattleFleet version with yanew's parametric toolbox design and added…
Thanks Tony, yes I will continue to revisit my previous files, to improve on them where possible. Hopefully this will work for you now after these minor improvements ; ) Cheers Jace
Can be found here as a free .PDO upload https://www.onekura.com/
Valve Rebels is a series of character-inspired caps designed for bikes, cars, motorcycles and scooters. Each model combines a tire-tread styled base with a bold sculpted top, turning a small technical part into a unique visual statement.…
Star Wars bookmark(empire/rebels)
Hello all, here you can find a Fusion360 file of the Star Wars Rebels logo to work with (or just print it out). Have fun Deutsch: Hallo zusammen, hier findet ihr eine Fusion360-Datei des Star Wars Rebels Logos, um damit weiterzuarbeiten…
Ahsoka Tano's lightsabers from Rebels! Both of them! The main body of the primary saber is both split into two parts as "Main Body Upper and Main Body Lower" and unsplit "Full Main Body" All of the STLs are in the orientation I printed…
Star Wars The Black Series Rebels Ahsoka Tano 6 inch Action Figure Stand with lightsaber storage I wanted a stand that was unusual. Ahsoka's lightsabers can detach, and I wanted to sometimes pose her with the hilts on her holders. This…
Hi Chris here is the updated files as per your request, Cheers Jace Thanks Alec for building the ghost and posting a video, Cheers Jace
Zeb Star wars Rebels With or without base. Add your own gun… Looks like he needs some kind of 2 handed bazooka looking thing. Well, if you do add your own gun, I would love to see it.
Ahsoka's new Lightsaber and Shoto (Mini) Saber as seen in Star Wars: Rebels and Ahsoka shows.
Introducing the 'Rebel Alliance' Golf Pitchfork with Ball Marker, a perfect blend of Star Wars enthusiasm and golfing style. Available on Printables, this distinctively designed pitchfork embodies the spirit of the Rebel Alliance emblem.…
I'd had this in my saved files from donkeys ages ago. I was recently inspired by Killonious's latest release. This model is perhaps out dated now as I see Kilonious model has a neck bracket that surrounds the helmet also. Something I may…
uses a 1/4 dowel through the center, should print pretty well. Category: Props
Had a few people request if I could have a go at making a working Rebels Ring. To my surprise I did. Here is version 1. Improvements if possible may come later, Cheers Jace Check out the link to see it working ; )…
I see I forgot to remove the neck part in the chest armour. I clearly wasnt paying enough attention at the time LOL. I'll upload a fix forthat next chance I get ; ) Cheers Jace Print instructions Licence: Creative Commons - Attribution -…
note: the main body should be split in half and then the smaller square goes inside the larger one.
First attempt at prop modeling. Dark Saber taken from Star Wars Rebels Picture is printed at 85% to fit on Ender 3 bed Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: Yes Resolution: 0.2 Infill: 10 Filament:…
Ezra's first lightsaber! I had done his second, so of course I had to do the original in all of its hybrid saber/blaster glory! Personally I printed the guard with supports generated in Cura. All of the STLs are in the orientation I…
Easy to print hitch cover. Printing PETG or better No Supports Orient with face up Suggest using Brim to help with bed adhesion Can pause the print to change the color of the design
I thought someone might like the Face and hat. The rest is surplus for idea purposes. But still could be a useful model in the right hands, : ) Could look quite cool on a spike ; ) Cheers Jace
You can glue a 10 x 1.5 mm round magnet in the base. Print instructions Recommended infill angle: 45° Low speed and high temperature will create a shiny top surface. There are "holes" inside the model to make some of the top layers more…
Just something small that prints fast and wich provides easy storage for all the upgrade cards that come and will come with the game Star Wars Legion. This one is for all you Rebel players out there. :) It can be printed with the logo…
Ezra Bridger's latest lightsaber! All of the STLs are in the orientation I printed them. Personally, I printed the On/Off Outer, Inner Grip and Upper Emitter with support generated in Cura. Category: Props
The symbol of Phoenix squadron originally painted by Sabine Wren. From Star Wars Rebels.
My boys and I enjoyed the new SW TLJ the other day, so here is a little something for Xmas you may like to print off for the young ones and or the older fans ; ) Enjoy, Merry Xmas Cheers Jace
This is a remix of the OpticalNecessity - Modular Helmet Stand with the Rebel logo to be able to show my Replica of the helmet of Luke Skywalker Rebel pilot of Star Wars. I modified the base to be able to do a color change as you can see…
Sorry cant recall where I found this file, So I cant give credit where credit is due : ( It was originally converted from a .FBX file to .OBJ & .STL Print instructions Category: 3D Printing Tests
High pitched compact whistle with Star Wars Rebels Logo. Colour change at layer 8.48 through to layer 8.98 No supports required. I did turn on “Thick Bridges” in my Prusa Slicer settings.
This model is available as 1 piece or in 3 seperate ones if you want to use different materials for the grip. I used white resin on a Form 3 for the body and cap parts and then printed the grip in TPU on a Bambu X1C. If you want more Star…
*** PLEASE READ *** I’ve received notice from Printables concerning my helmet designs. I don’t agree with the notice, but have decided to move my helmets to my Patreon Platform. I’ve actually had multiple requests to offer an avenue to…
Make your own comlink from the Star Wars Rebels TV series. This was primarily designed with a Kanan Jarrus costume in mind but can be used with any Rebels character as the same model was used by everyone in the show. The files also…
Print on one side, with small support material to the logo.
Star Wars Rebels, VCX-100 Light Freighter Ghost and Phantom_Remixed and detailed (not studio accurate)
Mucking around trying different skulpting techniques and ended up with this. Cheesr Jace
Pla friendly model. Recommended to print with 0.12-0.16 mm layer, supports on (tree supports ideal). Best result at larger size and slower printing. Material: PLA Layer height: 0.12-0.16 mm (for detail) Nozzle: 0.4 mm Temperature: 200-210…
This is a badge for the Halcyon Rebels group that dedicated themselves to getting every last Rebel onto the Galactic Starcruiser in the waning days of the Halcyon. The symbol is a combination of the Chandrila Star Lines and Alliance to…
Ole Miss Rebels Alternate Oversized Necklace Logo that I designed. I hope that you enjoy!
A great, original model, now with detail/greebles added and with or without pilots and decals. This is a big model (no idea of scale) but it will fit on my Flashforge Adventure bed. The model was test printed was great and all parts fit.…
Suggested to treat as single use due to issues with cleaning 3D prints after use and keeping them food safe. I printed mine in natural PETG.
Tired of letting those boring imperials to enter your room? Print this sign and avoid those annoying disturbances :D You can scale it, but keep in mind that the top layer tolerances must be high enough to let the lower letters to fit but…
Star Wars Sign of Rebels
Accesorio para casco Libus.
Easy to print Star Wars Rebels logo earrings. Use your printer's smallest layer height.
DIals to Replace Rebels Cardcorad dials in Xwing game
Ohio Rebels Earrings. Ohio outline with a script "R" on top. My son Plays for the Ohio Rebels and my wife wanted earrings for when she is at the games. Other Ohio logos and design coming.
Here is the awesome looking University of Nevada, Las Vegas Rebels Oversized Necklace, Pendant! Hope you guys enjoy! Fits with the standard oversized chain you can find here on Makers World. Want a commercial license to sell my prints?…
Rebels talisman, ready for dual extrusion! Just klick "keep in position" for right placement when opening. Created with Microsoft 3D Builder Imperial: http://www.thingiverse.com/thing:2037078 Print Settings Printer: ctc Rafts: Doesn't…
Very simple bookstand with integrated Star Wars Rebels logo. Print the logo side towards the print bed to avoid the need for support. Print Settings Rafts: Doesn't Matter Supports: No Infill: 100% Filament: R3D PLA white Category: Decor
Rebels Logo It can be printed in multi color eather in Bambu Lab studio, or in Cura by adding a pause in the layer tool, to shift filament. It can also be printed seperately and glued together. Will recommend printing the parts upside…
Very simple bookstand with integrated Star Wars Rebels logo. Print the logo side towards the print bed to avoid the need for support. Print Settings Rafts: Doesn't Matter Supports: No Infill: 100% Filament: R3D PLA white Category: Decor
*** PLEASE READ *** I’ve received notice from Printables concerning my helmet designs. I don’t agree with the notice, but have decided to move my helmets to my Patreon Platform. I’ve actually had multiple requests to offer an avenue to…
Star Wars The Black Series Rebels Ahsoka Tano 6 inch Action Figure Stand with lightsaber storage I wanted a stand that was unusual. Ahsoka's lightsabers can detach, and I wanted to sometimes pose her with the hilts on her holders. This…
Sabine Wren’s armor from Star Wars rebels - STL files cut to fit 200 mm print beds - Assembled OBJ file for scaling or larger printers Parts list ready to print: Helmet Ankle-armor Belt Comlink Elbow-armor Left gauntlet (standart and…
