Mini Recliner
Prints upright without support.
Print approx. €0.94–€1.15 excl. taxPreliminary estimate for one variant
- Downloads
- 153
- Likes
- 12
- Rating
- 0
73 models
Prints upright without support.
Print approx. €0.94–€1.15 excl. taxPreliminary estimate for one variant
This is a replacement pull handle that fits onto a steel wire cable for a La-Z-Boy sectional recliner. The steel wire needs to have a ball end that the handle will slide onto. Included is a plug that then slots into the handle to retain…
Print approx. €0.05–€0.06 excl. taxPreliminary estimate for one variant
This is a replacement handle for adjusting the tension on a vintage Ekornes Stressless recliner. This works with the friction fitting here: https://www.prusaprinters.org/prints/82858-ekornes-stressless-friction-mating Insert a 3/8" hex…
Print approx. €1.57–€1.92 excl. taxPreliminary estimate for one variant
Stressless Recliners Spare Feet to clip between the plastic and wood ring
Print approx. €0.50–€0.61 excl. taxPreliminary estimate for PETGSource material: PET
Recliner Tablet Mount These tablet mounts are designed to fit into recliners that offer a cylindrical accessory slot (but that part is printed separately so if your recliner has a different form factor for accessories you can print an…
Print approx. €1.44–€1.76 excl. taxPreliminary estimate for one variant
Back Fan support to be fixed with M3 bolt and Nut
Print approx. €2.61–€3.19 excl. taxPreliminary estimate for one variant
Recliner Large Glass Adapter This adapter is designed to fit into a recliner's cup holder and allow it to hold either larger glasses like wide-base wine glasses or beer steins with long handles. Here are the relevant dimensions to help…
Print approx. €6.90–€8.44 excl. taxPreliminary estimate for one variant
Recliner Arm Rest Holder This adapter is designed to fit between the side of a recliner and the under-the-armrest storage compartment. It's built to hold items such as video came controllers to laptops (see the photos for examples). Key…
Print approx. €18.56–€22.69 excl. taxPreliminary estimate for one variant
This is a simple angled mount, it's made of 2 pieces just for versatility since the first plate is a flat one made to just rise the whole assembly higher. The second plate is the one that angles the mount, you just need long M5 bolts that…
Like it says in the intro. . . The powertrain and basic sheetmetal of Dodge/Ram vehicles tend to outlast the plastic components. Having a ready source of replacements is key to really racking up the miles. . . . The “Repair” contest…
My recliner sofa handle broke so I modelled up and printed this, you will need to run a 5mm drill down the hole once printed but otherwise works well on my chair. I've included the fusion file so dimensions can be changed to suit your…
A replacement for the stock seat recline knob in the Hyundai ix35. The original one in my car was getting janky, so I modeled a new one. It's comfortable to grip, holds up well, and you can print it in whatever color suits your interior.…
Print it out on its smallest face or however you want. There are recessed grooves on the back for 10mm 3M VHB tape to stick it to the Lovesac Angled Cup Holder.
My Ekornes Stressless recliners were not holding in place well any longer. The issue was that the “pads” were worn out. Printer to the rescue. I designed these pads to bring new life to my recliners and I am so glad they worked! I printed…
This mousepad is 204mm wide and 217mm long. The cup part is 84mm wide and 67mm deep. Resize in your slicer as needed. Print settings: 3 walls, 3 top and bottom. 15% grid infill. Made with PLA, but PETG should work fine.
Replacement block for OKIN JLDQ-12B linear actuator. Part number: JLDQ.12.109.80 After having this part break on both our chair AND half the couch... replacement actuator assemblies are $90 on Amazon, and the block is not available as a…
Passenger Seat
The name and summary cover most of everything. If you have an Amia you have most likely been frustrated by being limited to being locked upright or going into full recline. This model gives you 4 options for recline in 8 degree…
I got tired of the broken clip on my power recliner and the missing clip on my powered standing desk, so I made this and printed it. Isn't it fun to 3d print fixes for broken things? Due to it's small size I printed it out of Anycubic…
I live overseas so when the driver's side seat recline lever broke on my 2015 Jeep Patriot, I decided to try making a replacement that would at least be functional until I could find a factory replacement. The factory part number for this…
Replacement for Nissan Cushion Assembly Knob part 87013-7S001 . Modeled from the switch on my 2007 Nissan Titan, but should work for many other models.
My recliner foot rest release pull handle broke. I glued it back together and scanned it. The original was designed to save materials. I just made it solid. You can purchase replacements: https://amzn.to/44Sru23 , but I just needed the…
Replaces the block on actuator on recliner, works good on my recliner.
Recliner Actuator Block Replacement - MotoMotion / MOTO / HHC Power Recliners What is this? A 3D-printable replacement for the arched actuator moving block (also called "slide block" or "traveling nut") found inside the linear actuator of…
The whole VAG seat recliner knob, tested and working in a Seat Ibiza 6L but should work on most of the vag group cars of that era (approx.. 2002) Please don't print this before testing the mechanism alone. I've posted the mechanism for…
Remix of BigSlowTarget's model. This is a replacement part to fix a La-Z-Boy recliner if the original plastic piece that holds the footrest mechanism together breaks. If the footrest is broken but you can visibly see the motor still…
A broken handle on our couch necessitated this build.
The cup holders in our recliner are too small for my coffee cup. So I printed this tray platform to adapt the cup holder to a flat surface. There are two options, one with a rim, and one that is a lego-compatible surface. If you're…
Replacement bracket for the front legs on some "Zero Gravity Lounge Chair" recliners. I designed this for a coworker that lost the original (somehow). Here's an example of the type it fits on:…
a recliner I made following a tutorial I watched on youtube
My IKEA recliners actuator broke. Print instructions Print with high infill hollow end down with supports on hole rings only. I've printed with PETG and recently PC Blend.
My dad was replacing a recliner slide unit every time it broke to the tune of 90 bucks a pop when all he needed was the slide block so 3d printing to the rescue.
Printed flat on it's back without supports 100% infill and 4 perimeters, 0.2mm layer height. I used PETG for my print and expect it to last a while. It fit perfectly for my chair without any modifications to the part after printing.…
Well this recliner is aging, but the other day when the handle broke I didn't worry a bit, as I knew Prusa would come to the rescue. Without the handle, the recliner is just a chair as turning the mechanism without mechanical advantage is…
The reclining handle cover was missing from my SF Forester so I printed one Note: in the photos it shows a hole, however it was misaligned from taking inaccurate measurements but I found that it fits on good just with a friction fit
Just a simple recliner handle/lever replacement for when yours inevitably goes missing. Designed for a Ashley Furniture Rocker Recliner, but will work with most recliners with a square pegged leg riser handle. Print Settings Rafts: No…
Hello, this is a replacement for the plastic grip found at the tip of the Trabant P601 Seat Recliner.This is a replacement for the plastic grip found at the tip of the Trabant P601 Seat Recliner. Its not a perfect match for the original…
I could not find a mug holder for my recliner that I liked so I designed my own. I needed it big enough to fit various sizes of mugs as well as fit my recliners existing cup holders. Hopefully it fits others too but if not, please let me…
The plastic protective floor protectors on the feet of a recliner/rocker in our den have started to crack and come apart. We have wood flooring, definitely needed replacements to protect the flooring. These protectors are triangular…
Don't know what it's called but if you have one of those vintage chairs with the vinyl straps an the part that let's it reclines breaks, you can print another one. I printed in white PET with pretty thick walls and low infill and it…
my mom got a recliner gave to her that was like new except the frame was twisted an wouldn't rock or recline anymore due to the rocker surface breaking an letting the other surface that rides along it slide off causing it to twist it all…
Seat Recliner Knob Made for Seat Ibiza 6L (2002) but should work on most VAG group cars of that generation This is only the mechanism so you can make the knob to your liking I will also post a full knob design but if you don't like that…
This handle should fit most GM trucks from 1995 to 2001, although I’m not certain of the exact years. It fits very well and holds up well. I printed my original one over two years ago, and the passenger side OEM recently broke, so I…
Includes spots for: Prescription Bottle Headphones A5 size notepad Pencils/Pens Roku Remote Control Extra area (I used it for a 8bitdo game controller)
Both of the original factory drive connectors broke on the powered recliner sections of our couch in our last move. Searching the internet for a replacement was like asking a teenager for a logical response of any kind. Took out the…
Save yourself $70 when the cheap plastic housing on your Ashley Power Recline furniture inevitably cracks. I reverse engineered the housing, made slight modifications to adapt it to FDM, and printed it out of PETG, which seems less…
These feet were designed for my recliner of an unidentified brand (similar to the one in the picture). The pipe diameter is ⌀22mm, and it has an internal ⌀6mm nubbin to fit into a pre-existing hole. I printed it in PETG, at 0.2 layer…
The remote control has very sensitive capacitive buttons. You can hardly touch them without one of the motors starting up. Operation without looking is not possible as the buttons cannot be felt. This cover eliminates the above-mentioned…
Angle side dual remote holder for recliner remote.
My kids keep yanking or knocking cups and bottles out of the cupholders in the recliner and couch. I made this flexible insert to grip cups and stabilize smaller bottles and cans. I printed it with a .6mm nozzle and all walls. Feel free…
I found a free Challenger seat on marketplace for my sim rig. It was only missing a reclining lever. In the spirit of keeping it free I mocked up a replacement to print. The fit was perfect and it feels nice so I figured I would share it.…
Recline adjuster for Livarno (Lidl) garden chairs.
Phone in the picture: iPhone 15 Pro. It will fit even with case. Supports both portrait and landscape orientation. Materials: TPU recommended - soft, will help prevent slipping
This is a lever for a recliner release assembly which fits a cutout of approximately 70mm x 55mm. I had trouble with the cheap plastic lever and its Amazon replacements breaking, so I decided to reverse engineer it and print a…
some intentation for 2mm foam
Sectional couch manual open recliner pull mount.
Made this because the lift-up doors that are on my movie theatre recliner get pushed out by my elbows, which in time is going to cause them to break off or just become loose. This is just a simple design that keeps them from doing that…
Seat recliner gear for R34 - CAD'd from dimensions from a photo - not tested yet on a car for fitment. Please feel free to let me know if any issues and I can change CAD
A low tray for a toolbox or workbench drawer that holds one drive size of hand sockets, shallow and deep side by side , one column per size. Shallow sockets stand on round pins sized from the ISO drive square. Deep sockets that would hit…
My hyken chairs recline function was getting a bit too soft and easy to push back. I designed these to sit between the tilt arm and the backrest to increase tension and make the back rest harder to push. The name formats are: Bendy V3…
Background I recently bought a used Fiat 500 and the driver's seat adjuster wheel/knob to adjust the tilt of the seatback wasn't working. I pulled the knob off carefully using a trim removal tool and noticed the plastic socket that grabs…
The clasp that holds my power cord together for my electric power lift recliner broke, so I made this one in tinkercad. Hopefully it can help someone else solve this problem quickly, without having to fork out $70 for a new power adapter…
We got the extra wide recliner from Ashley Furniture, and while it's a great recliner, it is indeed wide. It makes it difficult to reach an end table on either side. So I designed a cupholder and some storage for the left and right sides.…
Maybe it also fits for other similar models like "Bredsten, "Sirdal", "Larvik" or "Mysen". I cannot verify it.
Hi. This is a replacement knob for my 2012 Nissan Titan with electric seats. This should be compatible wit: Nissan Titan 1st Gen (A60: 2004-2015) Nissan Armada 1st Gen (WA60: 2004-2015) Infinity QX56 1st Gen (JA60: 2004-2010) Model…
Replacement for broken roller bushings in older La-Z-Boy recliners (circa 2007-ish). Two halves connected with M3x16mm bolts and accompanying nuts. I recommend using loctite so the screws don't work loose over time.
Hello, this is a replacement for the plastic grip found at the tip of the Trabant P601 Seat Recliner.This is a replacement for the plastic grip found at the tip of the Trabant P601 Seat Recliner. Its not a perfect match for the original…
Phone in the picture: iPhone 15 Pro. It will fit even with case. Supports both portrait and landscape orientation. Materials: TPU recommended - soft, will help prevent slipping
This is a lever for a recliner release assembly which fits a cutout of approximately 70mm x 55mm. I had trouble with the cheap plastic lever and its Amazon replacements breaking, so I decided to reverse engineer it and print a…
My kids keep yanking or knocking cups and bottles out of the cupholders in the recliner and couch. I made this flexible insert to grip cups and stabilize smaller bottles and cans. I printed it with a .6mm nozzle and all walls. Feel free…
Maybe it also fits for other similar models like "Bredsten, "Sirdal", "Larvik" or "Mysen". I cannot verify it.