472 models
To fix the frame with the 2.5" drive, use the original screws that are used to fix the 3.5" drive to the cabinet. K upevnění rámečku s 2,5" diskem použijte originální šrouby které se používají k upevnění 3,5" disku do skříně.
Print approx. €0.84–€1.02 excl. taxPreliminary estimate for PETGSource material: PET
Here you go a new design if you dont want to buy a garden hose nozzle, quick 3D print with only 47min. Increase the preasure water Cheap Quick Print that takes 47min Note: Please put a hose seal to prevent leaks in the threads section.
Print approx. €0.57–€0.70 excl. taxPreliminary estimate for one variant
Použito na svod okapu. Used for gutter downspouts.
Print approx. €5.61–€6.86 excl. taxPreliminary estimate for PETGSource material: PET
As a user of the WD MyCloud EX2 Ultra network drive, I was very disappointed with the noise made by the very small internal fan. At night the noise was totally unacceptable, especially when the drive was performing a sync or a large file…
Print approx. €4.83–€5.91 excl. taxPreliminary estimate for one variant
Celkový priemer 60 mm priemer čajovej sviečky 40 mm Vnútorný priemer pôvodného svietnika 23 mm Ak sa ti model páči klikni na srdiečko. Ďakujem. Overall diameter 60 mm diameter tea candle 40 mm Inner diameter of the original candlestick 23…
Print approx. €1.60–€1.95 excl. taxPreliminary estimate for one variant
I made this accessories for my friend that has big aquarium and wanted to fill it with garden hose not from outside but from kitchen tap. We added several rubber seals for leak prevention XD
Print approx. €1.44–€1.76 excl. taxPreliminary estimate for one variant
We had an old Boston model 19 sharpener that didn't work anymore. After a brief and easy disassembly (which somewhat reminded me about how much better old and simple devices used to be) I found a gear with many shredded teeth that was a…
Print approx. €0.76–€0.92 excl. taxPreliminary estimate for PETGSource material: PET
This is hose reduction from Herkules HDS 400 belt sander to parkside dust collector Category: Parts
Print approx. €2.49–€3.04 excl. taxPreliminary estimate for one variant
Om dat er in de handel geen verloop bestaat van groot naar 14.2mm heb ik het zelf geprint. Ik had wel een rubberen verloop van 50 naar 30 maar dat was nog niet genoeg. Ik had het hele verloop kunnen printen van 50 naar 41.2mm en dan beide…
Print approx. €0.94–€1.15 excl. taxPreliminary estimate for one variant
I saw that nobody made any low profile squashball feet for prusa mini so i did. The design is inspired by some other creators, with my own spin. Legs are push to fit, so no screws or bolts needed. i recommend printing 4 feet total for…
This design is specifically aimed at reducing vibrations on the Y-axis, particularly the bed, which carries the most inertia and tends to resonate at higher harmonic frequencies. In my tests using Klipper and an ADXL345 sensor, I've been…
Flash Forge Adventurer 5M (AD5M) Fan noise reduction Hot end. Best Modification Reinforced weak areas in the print. (fail areas) Can be printed in standard PLA. The front section thickness increased. Front-facing plate has room for your…
This reduction gearbox is a great way to demonstrate to students how gear ratios compound (it's also just fun to have as a desk toy). Each compound gear has a 32-tooth and 8-tooth gear stacked resulting in a 4:1 gear ratio. With 9 gears…
Hi I've reworked the universal mount model I remixed earlier to make it natively compatible with the Neptune 3 and 4 series, I can guarantee the dimensions will fit the 4 and 4 Pro with 20x38.5mm feet, and I think they should fit the rest…
Made to fit an Ender 3 V2 print bed (235mmx235mm) when rotated to face a corner. How to Print Scaling Scale to 10000% for a ~140mm wide head (or 9750% w/ heat gun to reshape the back) roughly 200mm x 229mm x 166mm (xyz) w/ opening facing…
This is the first release of a model that I intend to refine further. Help test this out, provide your feedback. This assembly reduces auxiliary fan noise and improves chamber heat retention. While also preventing the buildup of hot spots…
Planetary reduction gear for belted z-axis driven by NEMA 17 stepper motor. It has a reduction ratio of 5:1 and 25 GT2 teeth. This results in 10 mm/rotation. It may be mounted as a drop-in extension/replacement if your current drive has…
First I have to give credit to Synthetic Electron 3D for the original concept and design. He really did most of the work! This mod re-uses the stock 'auxiliary' cooling fan, blowing through the flat horizontal blower in the rear of the…
Hey there! So, for this print, make sure the layer height is more than 0.2 mm , or the connection won't work. Also, use 10-20% infill and don't bother with supports
My need was to automatically water up to 10 plants per raised bed. The commercial Gardena Micordrip lends itself very well to this, but it is relatively expensive and the philosophy is a ring-shaped distribution of water. However, I…
Inspired by the Little Ouchies pain fidget on Tiktok, this design is so those with a 3D Printer can make themselves or a loved one a pain roller to reduce anxiety and reduce self inflicted harm. Please do not sell these, this is only for…
Pipe reduction D 50 mm on the vacuum cleaner hose 32/40. I print the thread without supports, after a slight cleaning works well. It is possible to try with supports. PET-G Nozzle - 0.4 Layer - 0.3 Fill 15%
This model is compatible with the lego system.
This is a fan adapter that reduces from 120mm to 92mm and is only 5mm thick. I wanted to install an 92mm PC fan in the rear of a pc case with provision for a 120mm fan, the adapter had to be as thin as possible. And since I only found…
Model height is cut down in half.
This is a fan adapter that reduces from 92mm to 80mm and is only 5mm thick. I wanted to install an 80mm PC fan in the rear of a pc case with provision for a 92mm fan, the adapter had to be as thin as possible. And since I only found…
Reduction of a 120x120mm fan to a diameter of 50mm (outer diameter of the tube). Print instructions I recommend printing in the position as shown.
Thread reduction for pipe G1/2 to G3/4. I created it to connect garden water cooling.
This is a remix of https://www.thingiverse.com/thing:53451 , although the remix search box seems not to be able to find it. It's a reduction gear based on a planetary gear arrangement that can get fairly high ratios in a fairly compact…
The new phone went to the happy hunting grounds, and I needed to insert a SIM card into the old to make it a bit stuck: D Resolution: 0,1 mm, Infill: 100%
I needed a way to mount a 100mm ventilation hose to my printer enclosure. The (silent) fan I had on hand was a Noiseblocker Ultra Quiet XL1 (120mm), so I designed this simple and sturdy reduction duct. Mounting hole distance (center to…
A different take on the compound planetary gearbox. This time, we use split sun gears, synchronize the ring and planet gears. One sun gear will be fixed to the threaded shaft of the potentiometer (or some kind of tuning capacitor), the…
This model is compatible with the lego system.
Update your Robak 2 with this 19:1 gear reduction mod, which increases torque at the expense of top speed. Benefits include: Higher acceleration Improved climbing capacity Reduced motor startup hesitation with sensorless setups More…
Fits front and back of the QS138 90H V3. I designed and 3d printed this model before sending it to a laser cutting service who cut a thick sheet of mild steel and bent it in the right spot. I will end up welding this onto a plate on my…
I needed to inflate a raft and I had a Ryobi 40V blower. FTIJPI! I printed the first couple of layers to resize the part. I suggest you do the same and simply scale the part. I have also included the STEP and SolidWorks files as well. I…
This is another 120mm fan guard. where the most important thing is not to reduce the flow, after downloading and printing several models, which protect very well, the perimeter of the protection is covered, which is where the propeller…
If you like my work. I will be happy if you support me by donating a few bucks. PayPal Donation . ---------------------------------------------- Hello everyone, i designed this water reduction nozzle to save water while having a shower.…
The connection of some wooden rails is too tight, it is possible to use this reduction track. Printable without supports. Complete extended set contains: Straight Tracks Medium Straight Track - A Short Straight Track - A1 Mini Straight…
UPDATE 2024/04/21: Here is the promised link to the Limited Slip Torsen differential , for which this study was a test. UPDATE 2024/04/17: I have learned a lot while printing this. With the Bambu Lab P1S and 3DJakes PCTG Filament I can…
This model is compatible with the lego system.
reduction the vacuum cleaner tube please share with me your creations and result!!! :-) Thanks Print instructions material PETG
Like my 12:1 speed reducer for TT type motors this is a 21:1 ration version. Simple to print and compact in size. Great for sequencing.The video is here. https://youtu.be/WvyS8wwAOy0 The video for the 12:1 ration unit is here.…
Description I couldn't find a free reduction gearbox design for a Nema 17 stepper - so I made one myself! My design only requires 2 608 skateboard bearings and a bunch of m3 screws. The drive works with the cycloidal reduction principle…
I built a sim rig out of 8040 and 4040 aluminum extrusions and wanted my vacuum robot (Roborock S7) to clean below it. Therefor I designed feet in FreeCAD to raise the entire construction 10.8 cm from the ground. The corner feet are a…
Printsettings: Nozzle 0,4 No raft 20% infill 0,2mm layer height ironing - off
Isso é apenas um modelo 3d de um motor muito comum usado em projetos, e senti a falta de um modelo pronto para facilitar, enta decidi fazer um para solucionar esse problema para mais criadores. This is just a 3d model of a very common…
With this charging station you can charge the Airpod 4 and Apple watch
Reducer for use of large spools on Singer machines. Supplement with 1.5mm diameter wire.
Nema 17 stepper motor timing belt reduction, ratio 1: 4. Required hardware: 2 x F686ZZ ball bearing 2 x threaded inserts M3 2 x Socket Set Screw M3 6mm 4 x Nuts M3 4 x Screws M3 35 mm 1 x GT2 Timing Belt 6mm Belt 200 mm 1 x GT2 Timing…
This model was made for Lego Duplo with normal Lego.
I despise M2 screws. They're impossible to install. They use a 1.3mm hex that strips if you look at it wrong. This remix gets rid of the M2 screws and uses 2x of the existing screws from the OEM assembly. The intake and fan mount slide…
This model is compatible with the lego system.
This is a tiny cycloidal drive designed to fit a NEMA17 stepper motor Reduction: 19:1 The cycloidal ring has been designed to be interchangeable, so if you want to fit a higher/lower ratio cycloidal setup, you only have to print the disk…
Simple for connecting two pipes 38 and 40mm.
Hello there, I've created an adapter for the 250ml cans. The adapter is press-fit into the old cupholder. To improve grip, I designed spring-loaded pins to secure the can. Enjoy!
G 1 1/2" to G 1 1/4" reduction for drain Pipe Thread
Thread reduction from G 3/4 to PG 9. Perfect fit for Hikvision IP camera junction boxes.
REDUCTION FOR A COFFEE CUP FOR SKODA OCTAVIA
This is a cycloidal drive with a 0.3 mm eccentric shaft and 2 wheels to cancel out the vibrations caused by eccentricity in the shaft. The reduction ratio is 1 to 80 .
This is the WD My Cloud EX2 Ultra fan cover replacement modified for 80mm fan. 70mm version and additional details are avaible here: https://www.printables.com/pl/model/107553-wd-mycloud-ex2-ultra-fan-cover-replacement-noise-r…
Redukce pro připojení Hadice z Lidl vysavače k ponorné pile Festool TS 55 REBQ, vše tištěno PLA, je třeba tisknout od ústí, kde jsou drážky pro připojení koncovky festool. drážky nedoléhají na tiskouvou podložku proto jsem použil podpěry.
reduction 1/2 to 1/4 -drip irrigation
Redukce pro napojení pneumatické hadičky na zahradní hadici. Skvělé pro napojení vody do trysek vodní mlhy.
Gridfinity 1x2 bin for holding a sae 1/2" cardan joint and a 3/8" reduction step socket Here's a gridfinity bin size 1x2, where you You can stash a 1/2" cardan joint and a ½" to 3/8 reduction step socket. Used with 1/2" drive ratchet.…
These herringbone spur gears fit the National Geographic Professional 2 Pound Rock Tumbler Kit , which is known for being much too fast compared to other popular tumblers on the market. This gear reduction slows the speed from about 80-85…
Parkside battery reduction vs Riwall mower
During the 2024 FRC season, I needed a gear reducer for the NEO motors. All of the commercial options were either too expensive or out of stock so I developed my own planetary actuator. 4:1 planetary gearbox Neo motor bolt mount pattern…
Redukce dřevěných kolejí Lidl Playtive / IKEA na Lego Duplo. Ideální pro stavění mostů. Reduction of wooden train rails Lidl Playtive / IKEA to Lego Duplo. Ideal for building bridges.
na tisk použitý brim 8mm a suport nad 85°.
I needed a reduction for my EV800D to a mobile phone, and there it is. As any owner of these glasses know, the display can be removed and the second part is loupe, so the idea was to use it not just for self builded drones but also for…
I tried to find a easy solution to reduce the needed force to unspool the filament. With plastic spool it is no problem, but with cardboard spool the filament needs really much force. With this tube between spool and holder, it is much…
Phone holder on wireless charger pad for Volkswagen Golf Mk8. Holds iPhone mini on the centre of the charger. Without this holder is iPhone mini too small to stay on right charging position. The most suitable material for printing is…
Reduce from 50mm outside to 35mm inside to fit Kärscher WD3 to the dust cyclone
## 🇬🇧 English Description # 🔐 Smart Lock Offset Adapter with 75% Gear Reduction (Tested with Nuki) ## ✨ Short Description Adapter for smart locks on outward-opening doors – with 75% gear reduction for increased torque. Tested with Nuki…
Hi I remixed the model from emreerokyar on Thingiverse to make it compatible with any type of 3D Printer feet or even any appliance. Basically you can print them and use them straight away. The purpose of them is mainly to reduce noise…
update 22/05: Added reduction_plate_60t.stl file for pulleys with up to 60 teeth This reduction box supports reductions of up to 2: 1 or 1: 2 I'm creating another one for reductions of up to 3: 1 but that will unfortunately be a little…
https://www.thingiverse.com/thing:4441076 presented a thumb screw to replace the wing nut on the front-left corner of the BIBO bed. It is too wide for the other two positions. I have created a smaller version to fit the right-front corner…
If you are as handy as me and your smartphone falls into the toilet, you may need this NanoSIM to MicroSIM card reduction for your older phone ;-) I recommend printing with a layer height of 0.15 mm.
This is the WD My Cloud EX2 Ultra fan cover replacement modified for 120mm fan. 70mm version and additional details are avaible here: https://www.printables.com/pl/model/107553-wd-mycloud-ex2-ultra-fan-cover-replacement-noise-r…
I slightly reduced the opening of the door so that not much heat escapes, but so that it is enough to remove moisture. The PTFE tube is a little visible from above, but that doesn't matter at all, it's around the corner. The reduction is…
reduction/pass through the enclosure wall for example for this heater: https://a.aliexpress.com/_mPlGPcS I didn't want the heater touching the wooden wall. So I created a reduction and at the same time a passage through the wooden wall.…
Adapter für Jayo Filamentspulen um den großen Innenduchmesser auf einen kleineren zu reduzieren. Mit diesem Adapter läuft die Spule auf dem originalen Prusa MK4 Spulenhalter ruhiger und leichter. Das Gewinde schmiert man am besten mit…
The Intex pool skimmer got a 40mm hose. My pool hoses are all 32mm. Intex only provides connectors for the pool directly. No adapters for other hoses, so here a quick fix. O-Rings gaskets can be sourced from the provided Intex pool…
M24 to 3/4'' thread reduction/redukce závitů For bottle cleaner./Pro vyplachovač lahví. No support and with 100% infill
IBC reduction thread 2.21mm 2.34"/32mm
Print ASA/ABS or PETG I printed ABS. print 0.2mm structrural ABS 6 perimeters printed with supports printed on CORE ONE with MK4S speed profiles saved in 3mf file. (set the print profile according to your printer) model dimensions pin…
I've recreated an inversed belt reduction first seen here: As I wanted to build this on my own I had to go through several iteration to get it to work. My goal was to get it as close as possible to the original one, but while I was…
It is absolutely not perfect but it is a easy way to reduce shadows a bit. Use at least two of them, one on each side.
This is the reduction of fan 4020 to 3/8 inch for the smokehouse, which is used for the dymbox.
This is a fairly high precision model. Your printer should be accurate to 1/10th of a mm or less for best results. You may want to print at 40% infill and 3 perimeters for strength. You will need to print 6 of the planet gear, 2 of the…
Print Petg 0,15mm structural 0,4n 5 perimeters further default prusaslicer settings print 5 perimeters dimension I recommend smoothing the thread with P220 sandpaper or abrasive wool, then the thread can be easily screwed in.
Reduction for famous Czech gas mask M10/M10M. Reduction allows mount CM-4 filter. Use rubber seals for contact surfaces as photos shows. Paint reduction from outer side for sure that It is gas tight. (It close gaps between layers). USE AT…
reduction makita BO5030 to parkside vacuum cleaner
This is a simple remix of Henlor's extruder cover, optimized for SLS and SLM printing.
Silence your Rise Garden! This sound reduction kit significantly minimizes the water flow sounds. After installing, the sounds from the flowing and draining water will be so quiet you'll barely notice them. The quiet hum of the electric…
https://www.vaude.com/de/de/12502-qmr-reduction-parts-2-0-ersatzreduktionsgummis.html Printed in TPU. If you need the Freecad file or different sizes, hit me up in dm's.
This model is really nice for reducing dust outlets from Metabo thicknesser/ planer to normal Kärcher shop vac.
Reduction for water tap which you can use for sanitation of your beer tap or other stuff. Thread reduction: G 5/8-G 1-2 For tightening you can use a 10 mm Allen key. Iam normally using this tool for sanitation with warm water.
EN: This is a reduction for a peugeot 308 I (2007-2013) can or cup holder with the possibility to use it as a coin organizer. CS: Toto je redukce pro držák plechovky nebo kelímku do vozidla peugeot 308I (2007-2013) s možností využítí jako…
