35 models
Simple model buil with thinkercad. I tested with PLA and with a Creality Enver V3 se. I made 3 models for my 3 Mini PCs dreamquest at home. Any question, send me a email with the subject: “Mini-PC Dreamquest Fan” to [email protected]
Print approx. €1.93–€2.36 excl. taxPreliminary estimate for one variant
Similar to https://www.printables.com/model/657470-tesla-air-freshener-clip , but I remade it narrower and added a thicker tongue, deeper groove, and a rounded end so that it fits perfectly with the REFRESH style air fresheners. This…
*** Thanks for checking out this model! *** If you appreciate what I'm doing, consider buying me a coffee , and check out my other models for something else you might like! ********** The summer is in full swing, but my 14 year-old grill…
There was a notable change where the design of the Bento Box Receiver Box no longer fit into the "L" slot in the bottom in the a refresh of the Bambu Lab X1C. Additionally the underside of the machine also changed, which necessitated a…
This sign honors friendship. It was printed flat and does not need any support material. PETG was used with a 10% infill. The .3mf and .gcode files contain a color change for the words.
Introducing a practical solution for storing your drinks in your Tesla Model Y. This 3D printed insert fits perfectly in this under-seat storage box from Temu (https://share.temu.com/BY8kgFcX30A), holding up to six cans securely. Whether…
Player Marker and Victory Point tokens and Round Tracker token for Star Wars Legion Rules Refresh 2024
Every one of us knows the problem: You are planning your project on a whiteboard and suddenly the Sharpie doesn't want to paint anymore . Well, what we do next is that we throw that poor Sharpie frustrated and as hard as possible in the…
What is it good for? I use this bowl to refresh my silica gel in the microwave. Put some kitchen paper in the bowl to avoid melting the plastic when the silica gel gets hot. Put it in the microwave at lowest power for a minute. Get it out…
There are lots of similiar trays that are well designed but the ones i liked either missed some features or where poorly edited from other stl's and/or designed to thick with to long print times. I made this one thin enough that you print…
I have a couple of play&charge kits for my 360 controllers, but all the batteries don't hold any charge. Print instructions Using a more efficient charger like these designed for lipo/nicd/nimh you can refresh the battery and they hold at…
FFXIV and MtnDew are doing a promotional event where you can exchange codes from real bottles for in-game items, including this “Sparkling Citrus Refreshment” bottle. So of course I decided to 3D print one for fun & now so can you.
The new FlightFender v2 changed the layout of the base and no longer fits in the FlightFins cutouts on the TFL footpads. FlightFins sells their official adapter here … But if you wanna save a few bucks (or FF's adapter is unavailable),…
Please note the accuracy of this code can not be guaranteed and should always be validated against a known good sensor.
I like using the Refresh Optive Lubricant Eye Drops for my dry eyes. The tube has more in it than a single use, but the tubes don't “stand up” to store for later. I created 2 designs to hold the tubes. One for a single tube, and one that…
Re-modeled so you don't have to use supports Here is a link to the Onshape CAD: https://cad.onshape.com/documents/6e9e4b0d9f345ba37c29c696/w/0564738dc06b977c9cfd0f3a/e/24dcf5e2dabfb4677b4f5e08
Deutsch: Kleine und handliche Box für gepresste Mini-Handtücher. Zusätzlich habe ich gleich ein kleines Fläschchen (30 ml) für das benötigte Wasser eingebaut. Damit die Handtücher aufquellen, betreufelt man sie mit dem Wasser aus dem…
Refresh Tears Bottle (0.17 oz) Holder
This kit is designed to replace the ageing plastic bushings that make up the 1st gen RX-7 wiper assembly. It currently contains the mounts where the linkage mounts to the body under the front windshield and the larger round socket for the…
GIRA System 55 Alternative Rocker Holder (Post-2024 Refresh) This is a 3D-printable alternative holder for the GIRA System 55 light switch ecosystem, specifically designed to fit the updated system released from 2024 onwards . The Problem…
I have designed a version of the Hero Me Base Gen2d, from scratch, in Fusion 360. It is a very close replica of the Gen2d. Thank you MediaMan, and Kelokera, for all your work on the original design. Pulling measurements off of the STL…
Parts to help make a caliburn v1 refresh. Front tube cut jig is to help make the cuts on a 1 ½ tube easier than gluing the paper cutouts on. May have to use some blue tape to hold the tube still while cutting. The ½ od ¼ id tube is for…
Using my Fusion 360 refresh of the Hero Me Base I have created a refresh of the Teaching Techs remix of the original Hero Me Base, but using the Gen2d design, for use with the DD E3 Direct Drive mount from Basaraba Innovations. Thanks…
This is a spacer to fix worn-out locking mechanism on Polish VIS vernier calipers. Possibly resizable for other vernier calipers as well. Install as pictured by first separating the caliper parts. Can't do it wrong.
K1 Side Fan round style LED Light holder some refresh v3. I want to prevent shadow of Side fan, raise LED up as possible as I can…
This container is designed to keep coriander fresh for longer by providing a protective shell with controlled ventilation and moisture retention. Simply place the coriander inside, and the structure helps reduce dehydration and external…
A unique 3D printable creation — this Home Refresh & Styling Bundle of 6 complete 3D printable model packages. Save $14.95 (50% OFF) compared to buying individually! **Models Included:** - Cloud Shelf Bracket - Mountain Range Bookend -…
Background When my Bose MediaMate PC speakers stopped working last year, I decided to try and open them up and repair them. Unfortunately the old plastic shells were impossible to open without cracking them. I took this as an opportunity…
Complete video instructions in the .pdf file. It has better performance and a longer extension. Additionally it has been optimized for the Mark III, Mark IV and Com8 frames. This will fit in any tool bay in the Mark IV. See…
This kit is designed to replace the ageing plastic bushings that make up the 1st gen RX-7 wiper assembly. It currently contains the mounts where the linkage mounts to the body under the front windshield and the larger round socket for the…
This container is designed to keep coriander fresh for longer by providing a protective shell with controlled ventilation and moisture retention. Simply place the coriander inside, and the structure helps reduce dehydration and external…
Deutsch: Kleine und handliche Box für gepresste Mini-Handtücher. Zusätzlich habe ich gleich ein kleines Fläschchen (30 ml) für das benötigte Wasser eingebaut. Damit die Handtücher aufquellen, betreufelt man sie mit dem Wasser aus dem…
As OEM BMW vent air re freshener comes with 2 clips for the vent, and it stay a little wonky. I have created a file to print an additional one as the body has places to move the original two for better positioning. Adding third fixed all…
🛠 3D Printable Tools – Created to create This is a 3D-printable tool , designed for refreshing Parkside tools design, for repairability and ease of assembly. Compatible with Parkside screwdriver components:…
Complete video instructions in the .pdf file. It has better performance and a longer extension. Additionally it has been optimized for the Mark III, Mark IV and Com8 frames. This will fit in any tool bay in the Mark IV. See…
![#0171 BBQ Grill Refresh [New Knob]](https://media.printables.com/media/prints/924993/images/7220902_9e60f6ce-b8c3-4b90-bec1-789ab48be3be_3dfc4af6-7946-4e52-bf2e-3f0d3ed2c1de/20240716_084944.jpg)
