76 models
Optional upgrade for your RepRack or RepBox storage systems. Add a flange rollers to your slip rod setup for enhanced rolling as needed. Print directly from your RepRack or use in a standalone configuration. Snap fits cleanly over slip…
Print approx. €0.12–€0.14 excl. taxPreliminary estimate for PETGSource material: PET
Optional addition to RepRack , default configuration comes standard on all RepBoxes v2.3.1 and up . The slip rod allows for much more lubricity than just trying to pull a filament spool on a piece of pipe alone. In addition the ribbed…
Print approx. €0.69–€0.84 excl. taxPreliminary estimate for PETGSource material: PET
This model is heavily based off the RepBox stands from Kyle and MakoDaShark. I really enjoyed the stands they created however they didnt fit the Repbox 2.5 that I have. I used the printed models I had from MakoDaShark's design to create a…
Print approx. €12.26–€14.99 excl. taxPreliminary estimate for PETGSource material: PET
This fitting replaces the exit fittings that come with the repbox to add PC4-M10 pneumatic couplings to connect PTFE tubes directly to the repbox. This is a remix that compared to the original: extends the passthrough at the top to fix a…
Print approx. €0.50–€0.61 excl. taxPreliminary estimate for PETGSource material: PET
I created these exit plugs to replace the ones that Repkord provides for their RepBox filament management box because the originals are very difficult to insert, even more difficult to remove, and often crack on the outer flange after…
Print approx. €0.12–€0.14 excl. taxPreliminary estimate for one variant
For RepBox version 2.5.1 and up that include the new twist lock style ports only. These new printable twist lock plugs are way easier to install and exert less stress on the acrylic panels when being installed. Print as many as you need…
Print approx. €0.63–€0.77 excl. taxPreliminary estimate for PETGSource material: PET
You can either print the Zwinder-Model and only replace the side-parts of the stand with my remixed version. Or you can use my pre-arranged 3mf and bcode files to print everything you need at once. Sheet 01 needs to be printed once per…
Print approx. €3.04–€3.71 excl. taxPreliminary estimate for PETGSource material: PET
This is an upgrade for users of MMU and who has (un)original drybox (also works with the Slim version). This system replaces the filament buffers. It's a project in development that I try to improve with the time, thanks for your…
RackStand option for RepBox and RepRack systems. Also compatible with RepWinder and now allows you to use with v2.3.1 and up RepBox with slip-rod system. Open source 3D printable, laser cuttable, or cnc files and original Fusion 360 files…
PLEASE BE SURE TO LOOK AT THE READ ME FIRST FILES BEFORE PRINTING FOR IMPORTANT NOTES! Print your own set of parts for RepBox v2.5 and truly make it your own! Includes STLs and gcode for full part set and a separate set for the slip rod…
This a remix of VincentGroenhuis's Integrated Auto Rewinder, sized to fit jterranella's RepRewind stand so five of them can fit inside the RepBox 2. The scad is the work of VincentGroenhuis, I merely changed the dimensions to fit the…
This is to use PC4M10 PTFE tubing on my Repbox exit ports for my MMU. I wanted a more secure connection than the stock fitting. You can use the stock nut, but I've included a printed version.
Newer repboxes don't come with spool holders, but use a slip rod - which has way too much friction. Repkord has a spool roller model to fix that - but it takes way too many screws to assemble, is still rather wobbly without adding even…
Fully 3D printable. All you need are four 608 style skate bearings and your printer. Print and snap together. Optional 10mm x 3mm disc magnet pocket for adhering to the top of metal surfaces. Sides are symmetrical. Print two per roller…
MK3S+ and MK3S FS Cover 6mm OD 4MM ID Adapter For PolyBox or RepBox with 6MM Tube (PTFE) based on the Original Prusa MK3S+ and MK3S FS Cover. Note: This GCode is for the MK3S+ the GCode for the MK3S is located under the User Print Files…
I wanted rollers where the bearings were a bit wider apart as I had a spool pull off when they're closer together, also doubled them up for spools next to each other on the RepRack to feed the Palette. I used 8x20mm metal pins (Amazon aff…
I found the TUSH style spool rollers in the RepBox to be a bit fidgety. While holding a spool and trying to slide them to align, I was always knocking them over. Since I never have more than 5 spools in the box at a time, and the vast…
This is a remix between three different styles of Spool Auto Rewinders. There are multiple options for the side brackets depending on your needs/preference. Changes: Updated Shana 's sidebracket.stl to support the slightly larger axle in…
The new fittings/connectors for the Repkord Repbox version 1.5 are very unreliable. Not only are the connector threads insecure but the fittings barely hold on to 4mm ptfe tubing without serious force. Additionally if you have the sealed…
Author : Zcubed https://www.prusaprinters.org/prints/68407-repbox-15-fittings-for-pc4-m10-pneumatic-couplings Minor modification to facilitate filament insertion. 07-02-2025 - Add version for PC4M8 connector
I've tried the original rollers and found them too short and too much sideways play. I decided to rework the original roller STL and added 6mm to the length.
Assembly instructions are mostly the same as for the single version ( https://www.prusaprinters.org/prints/134806-flange-rollers-for-repbox-231 ), you just need to print the additional 2-part spacers for in between the bearings as well.
Here's some Star Wars day fun. Add a little style with a Millenium Falcon inspired spool holder setup! RepRack, RepBox, and RepWinder Compatible. May the fourth be with you! Check out the X-Wing Style Rack Stand too! Bill of Materials…
English: Silica gel box and filament plates for auto rewinder adapter. Print lid with no bottom and top layers and preferred infill (in my case grid with 30% infill). Filament plates can be printed with multicolor. print Settings: layer…
Support free remix of the following, this version will have clean holes without the use of supports. RepBox PC4-M10 adapter with large hole https://www.thingiverse.com/thing:3939989 by Forfelet which is a remix of RepBox PC4-M10 adapter…
I really liked Kyle's mounting on his RepBox, but I have the hinged lid add-on for easier access to the MMU itself and it would've both not fit and interfered. I think this is for the RepBox v2.3, I'm not sure on the wall thicknesses on…
Simple holder for the dessicant that came with the RepBox humidity kit. I used Command strips to hang it on the inside under the top of the box for clearance. Print instructions Category: 3D Printer Accessories Summary Simple holder for…
Simple printable wall mount for the RepBox https://www.repkord.com/products/repbox-2-the-3d-printing-spool-management-solution Print instructions Category: 3D Printer Accessories
The nipples that came with the repbox didn't always hold on to my PTFE tubes very well, and sometimes I came back to find the PTFE tube wrapped halfway around the spool (PTFE is very slippy, that is why we use it :P ) So I designed these…
i made these stands for the repbox, i didnt want to mount to the wall. i used a 20mm m3 to pinch and secure the repbox to the stand if doing on a mk3, you will need to use 0 skirts or it wont fit painted supports on the top groove also…
English below Bei den RepBox-Kästen schlackert das Hygrometer locker an der Frontwand herum. Da gibt es die Empfehlung, alle Ecken und Kanten mit Silikon abzudichten und hier kann der Wasserdampf nach Belieben einströmen. Ich wollte das…
Prevents the spool from slipping on the substrate, print with TPU, 3 perimeters and tick Irregular surface/ outer walls. Position of the join : random Just cover the rewind with the sock The model is for the standard 70mm rewind support…
Here's some Star Wars day fun. Add a little style with an X-Wing inspired spool holder setup! RepRack, RepBox, and RepWinder Compatible. May the fourth be with you! Check out our Millenium Falcon version of this stand too! Bill of…
Big funnel on the inside to help with loading of the filament. Modeled for a M5 Festo fitting instead of the M10's Zcubed and Regis use for the PTFE..
Automaticky navíjení filamentu při výměně u MMU3 Není potřba Buffer. Složeni : Do Crossbean v5 nacvakneme Inclined ramp v1 nakloněné směrem od dvířek. Do center cylinder budem potřebovat Šroubek M3x4 X2, slouží jako oska.
Designed these boxes to store silica gel beads between the Repbox2 spool feet. Should work with most 1KG spools. Used modified block feet to avoid supports for the base. The lid fits tightly, and has a beveled edge to help lift it. Take…
Made a smooth version to set the rackroolers where i want them eaiser. Use a brim when you print.
General Info These Panels attach pretty securely to the side of the Repbox without bolts, but if you prefer you can bolt them in place (you won't be drilling holes into the filament storage area, so you won't be impacting your humidity…
The Zwinder stand, crossmembers, and axel are remixes of several parts towards accomdating an MMU filament spool rewind assembly. This combination allows for a better fit within the Repkord RepBox2. Print in PETG or PLA, at .20 layer…
Better rollers in all aspects than the original. Fits better, rolls smoother.
support raccourci pour passer sous la boite repbox 2.5
Due to slight variances in the housing diameter of round hygrometers sometimes they don't fit as snugly in the lid opening as hoped so we've developed this optional clamping ring to better fasten the hygrometer to your RepBox if it feels…
A plug for the Repbox cable glands. they’re long enough to be easy to pull out, and they can grip 1.75mm filament making it easy to change filament without opening the Repbox door. Fusion source is included if you want to tweak them.…
Filament passthrough for RepBox. Did not like the ones that come with the Box and I wanted to populate all outlets in one row. I don't need PTFE whole way to the printer, my printer is in really dry environment. But, if I get request for…
Bought Prusa RepBox, it came with Filament slide bars. Did not like the friction. This roller is designed to be used with the bearings (608Z) that came with Prusa MMU2S for the spools and the aluminium rods (diameter 7.8mm). Bearing is…
This is a replacement for the Prusa Repbox black PTFE connector. This will allow you to connect a PTFE tube to the box without the PTFE tube coming loose or pushing it back into the box. Prusa Slicer: Default settings Required Parts:…
General Info A big ole' box for keeping your filament dry and your spools turning makes life super easy but if you need to load a filament spool into tiny PTFE tube in a high, dark area, it can be a challenge. This is a small little…
Humidity sensor ring for RepBox 2.3 "PRUSA EDITION" Centers the humidity sensor and keeps it in place. Place the ring between the sensor and the acrylic lid. RepBox Hum Meter 1mm.3mf : Just a ring, slice it in 0.2mm. Easy to print. RepBox…
I tried the flange rollers but I had a problem with them when I wanted to use full spools so I went back to using the rollers I made for another dry box. They should work with most spools under 74mm in width. For the rod holders scale it…
This is a simple option for the RepKord RepBox filament organizer to attach your bowden tubes directly to the plug for each filament. It replaces the PG7 strain relief devices which are horrible at holding the PTFE tubing used in bowden…
Side-Mount Print Sheet Holder for Your RepBox and Prusa i3 Printer A variation of the Print Sheet Holder that is mountable to either side of a RepBox by Repkord . The holder can store one each of the smooth, textured, and satin sheets for…
A tool to make loading your RepWinders , with a pretensioned rewind spring, into your RepBox much easier. Pretensioning your RepWinder rewind spring/axle before placing it in your RepBox allows the filament spool to retract/rewind right…
Bought Prusa RepBox, it came with Filament slide bars. Did not like the friction. This roller is designed to be used with the bearings that came with Prusa MMU2S for the spools. No screws needed. Layer height: 0.2mm After print is done,…
This provides replaces the sides for Repwinder to use modified sides (inspired by RackStand). The sides are small enough that two will fit on the build plate (see 3mf - if using the STL split it into objects and rotate one side by 180…
The setup in the photo shows a MK4 MMU3 in a Prusa Enclosure. I would like to add some more stiffing across the front (past the handle) and back (Between the hinges) of the lid
You can assemble and adjust the width of the spool rollers according to your needs. The holder fits inside the box tray. Printed with 15% infill, no supports needed. PLA or PETG are suitable materials. Used bearings 608z.
I recently purchased a Polyphemus filament drier and found that getting filament into/out of it was a bit ‘clunky' especially in comparison to my RepBox. However, the RepBox didn't provide filament drying or humidity control. While…
Fixed the axle to ensure the wheels are not scarping against the sides of the holder and fixed the axle so it locks the spring properly. It all works nicely now! Many many thanks to Joe Mike Terranella for his original remix of the…
Mounts to allow for safe stacking of Repkord Repboxes on top of each other. Since Repkord has discontinued the Stax mounting kit, I needed a method of safely stacking my two Repboxes atop on another. The mounts come in front and back…
This model is heavily based on the Original Prusa Enclosure RepBox 2.5 Stand by techis, which is, in turn, heavily based on the RepBox stands from Kyle and MakoDaShark. Updates: 2024-04-01: Added two optional posts for the back of the…
2 sizes of storage tray designed to attach to the front wall under the door of the RepBox2. Printed in PETG but could realistically be printed in any material you choose. 3 screw holes are located on the bottom if you want to attach them…
The model is very easy to put together. All you have to do is print the slicer file or laminate from the STL files. It is important to position the parts and use supports.
Pretty self-explanatory. While it would theoretically work on any honeycomb wall, it's oriented sideways and at an angle to match the repbox. Labels are included if you're using an MMU and want the sizes to pop a bit
13 Full Size and 12 Micro Slots
Plug that fits the clamps on a Repbox 2.5 for PTFE Tubing
Filamentrollen-Innenringscheibe für "Repbox Auto-Rewind Spool Holder". Abhilfe für zu sehr haftende Rollen (z.B. bei Pappe) und in folge zu hoher Zugkraft. # Printinfos * Printprofile: MK4S IS 0.20mm Speed (with MMU3) * Nozzle: 0.4mm…
A companion to the MK3 RepBox side-mounted print sheet holder , for the MINI/MINI+ print sheets. There are two versions: one for MMU printing (pictured) and one with debossed sheet label text for single material printing. This print sheet…
A 3D printable French cleat to mount a Repbox to the wall. The left and right screw holes are 16 inches apart to easily attach to studs. The Fusion 360 file is included to more easily modify the models. Prints without supports If you like…
I found that the nylon tubes would sometimes slip down when using the original tube feedthroughs when loading filament. I designed these adaptors to be used with push on BIQU PC4-M10 connectors. They hold the filament in place well and…
Needed a way to manage the ptfe tubes going to my buffer for the ERCF. Made this up to help keep things tidy
The hexwall models add enough space to fit on the side with this enclosure honeycomb wall model. https://www.printables.com/model/540299-prusa-enclosure-honeycomb-wall-interlocking-panels If you like things to be symmetrical I added…
REMIX of Integrated Auto-Rewinder Spool Holder for Repbox by fluffysucculent https://www.thingiverse.com/thing:3920468 and RepRewind - Auto-Rewind Spool Holder for The Repbox and Repbox 2 by jterranella…
This will work for any version of the repbox I got tired of the ptfe tubes shifting in and out of the weatherproof connectors that are supplied with the repbox. The stock fittings aren't really designed for ptfe anyhow, so I came up with…
So I do not use my box like the original model. I only use 1 spool per printer, two printers, and the box is a bit high an hard to reach. Any time I loaded or unloaded a spool the original rollers would pop loose or slide around making it…
This will work for any version of the repbox I got tired of the ptfe tubes shifting in and out of the weatherproof connectors that are supplied with the repbox. The stock fittings aren't really designed for ptfe anyhow, so I came up with…
