Search results: rind

Sort order

2,189 models

P
PrintablesROPI

Herb Grinder ROPI

⚠ Note: This is the very first prototype of the ROPI grinder. It works, but it’s basic. If you want the latest and fully refined version with stash chamber, durability upgrades, and smoother grinding, check out 👉 Herb Grinder ROPI with…

Downloads
1,532
Likes
186
Rating
5
P
PrintablesP_B1234

Drill sharpening tool for angle grinder 125mm

With this slip-on tool you can easily sharpen you drills. it will slip-on the protector (1mm with) of your angle grinder. I printed it with PLA but i think it is better to print it with ABS. Use brim and full supports only on the bed…

Downloads
753
Likes
77
Rating
5
P
PrintablesROPI

Herb Grinder ROPI with Stash Chamber V2

⚠ Note: This is the second version of the ROPI grinder. It introduced the top stash chamber and major usability upgrades. If you want the latest and fully refined version with further durability, smoother grinding, and overall polish,…

Downloads
748
Likes
86
Rating
5
P
PrintablesDankof

Grinder drill sharpener 115mm

Description: This is a remixed version of the original drill bit sharpener, redesigned to fit a 115mm diameter grinder. It offers a compact and efficient solution for sharpening your drill bits with ease. Printing Configuration: Material:…

Downloads
680
Likes
112
Rating
5
P
Printablesramservices

TIG TUNGSTEN GRINDER for DREMEL

Re-design or Re-mix This was a new setup after trying some on else's (TIG grinder uses collet by jobstulus September 30, 2020). Not sure why so big but was a great idea to use the tig collet for support. It had merit as you just use the…

Downloads
622
Likes
86
Rating
3.33
P
PrintablesStevenVanHands

Herb Grinder Spoon/Knife

The knife spoon has a small handle to grab the knife without getting your fingers dirty. The included 3mf prusaslicer file uses an mmu2s to change the color of the handle, making it more visible if lost under the finer herb. There are two…

Downloads
563
Likes
99
Rating
5
P
PrintablesFirecactus

Herb grinder

This model has come through many iterations to become as functionally useful as it can. the sides are grippy and the grinding teeth are quite strong. You can emboss a logo or some initials on the top&bottom pieces to customize and gift it…

Downloads
527
Likes
49
Rating
4.33
P
PrintablesOndřej Hladík

Angle Grinder Discs Holder

Holder for angle grinder discs. The discs are stored in two rows, the maximum disc size is 125mm. The holder is ideally attached with 4mm screws. Printing without supports, Infill: 10%. Share your printed model.

Downloads
363
Likes
35
Rating
5
P
Printablesdirrgang

Saeco/Philips/Gaggia Grinder Adjustment Tool

Should fit the following models: Gaggia HD8749/01 - Naviglio HD8749/11 - Naviglio RI8260/01 - Velasca RI8263/01 - Velasca RI9304/01 - Platinum RI9304/11 - Platinum RI9304/21 - Platinum RI9305/01 - Brera RI9305/11 - Brera RI9700/60 -…

Downloads
248
Likes
16
Rating
5
P
PrintablesPIZZA_CAT

AUGER COUPLING FOR MEAT GRINDER

Auger safety clutch for meat grinders Zelmer, Bosch, Philips ect. I received another order for the repair of a meat grinder. As usual, the plastic part failed. The sore spots of all meat grinders are gears or clutches. Because they are…

Downloads
245
Likes
17
Rating
5
P
Printablesfns720
Downloads
167
Likes
18
Rating
5
P
PrintablesPIZZA_CAT

GEAR FOR MEAT GRINDER ZELMER, GORENJE

Gear for meat grinder Zelmer, Gorenje. Diameter - Ø32/Ø62 mm; Number of teeth - 19/74; Height - 24 mm; Landing on a shaft - Ø7 mm.

Downloads
164
Likes
16
Rating
0
P
Printablesbuchnema

Click Counter for Comandante Coffee Grinder

I love my Comandante manual coffee grinder but I always forget to how many clicks I had set my burr, especially when switching between coffees and brew methods. So I created this little counting gadget in Comandante style. It makes a nice…

Downloads
125
Likes
30
Rating
5
P
Printablesfifindr

Dust Collector for Sanding / Grinding – Vacuum

Dust Collector Attachment for vacuums with a 35/32 mm diameter . The tool features a U-shape divided into two arms, each equipped with multiple air intake holes. This design allows it to capture dust and debris efficiently across a larger…

Downloads
98
Likes
19
Rating
0
P
Printablesretired 306

Milwaukee Grinder Wrench Mount

I needed a method to mount the grinder wrench and the nut beside my grinder when not in use.

Downloads
79
Likes
15
Rating
0
P
Printableskennyd1gital

KINGrinder Replacement Lid for K0, K1, K2, K3, & K5 Models

A simple replacement lid for the KINGrinder manual coffee grinder (will fit models K0, K1, K2, K3, & K5). Useful if you have misplaced or broken the original lid, or if you would just like to customize your grinder with a different color…

Downloads
77
Likes
6
Rating
0
P
Printablesbasheer

Pepper Grinder Funnel

A simple funnel to make reloading a Peugeot u'Select Pepper Mill much easier. Prints cleanly upside-down without any support. Modeled in Onshape, view source here

Downloads
44
Likes
1
Rating
0
P
PrintablesMene

1Zpresso Q2 coffee grinder bean hopper lid

This is a replacement for the semi-clear plastic lid that is attached to the q2 handle. I measured the old part, created the model in OpenSCAD and printed it. It fits perfectly. While this is a very easy design, I am it sharing in case…

Downloads
36
Likes
1
Rating
0
P
PrintablesTomas Rendek

Grinder pipe

Pipe for coffee grinder

Downloads
17
Likes
1
Rating
0
P
PrintablesDennis

Nextgrinder 64 NextLevel Funnel

Edit: V2 with a bigger Funnel is now available! I had issues with my 3d-printed Pipe for the Nextgrinder 64. I had to power off and on the grinder multiple times, since the beans where stuck to the outside of the pipe thanks to the…

Downloads
17
Likes
0
Rating
0
P
PrintablesAltruego

AeroPress Conqueco grinder adapter

Transferring the grounds from the grinder to the AeroPress seemed like an extra and unnecessary step. This model allows the user to grind their coffee directly into the AeroPress when using the Conqueco rechargeable grinder. Works with…

Downloads
16
Likes
1
Rating
0
P
PrintablesIridium

Uťahovač matice na mlynček - Grinder nut tightener

Uťahovač / uvolňovač som navrhol pre mlynček na mäso na kuchynský robot ETA GRATUS. Možno pasuje aj na iné elektrické mlynčeky na mäso od ETA. Ak sa vám model páči, kliknite na srdiečko a pri vytlačení pridajte fotku a ohodnoťte…

Downloads
16
Likes
6
Rating
0
P
Printables3DHippo

Coaster for Salt and Pepper Grinders

I have the Problem, that my beautiful Salt and Pepper Grinder lose a little bit of Salt and Pepper while standing on my Table, my solution so far was using regulas Coasters, but this is a very unstylish solution, so I made Custom Coaster…

Downloads
13
Likes
3
Rating
0
P
PrintablesGraubart

TORMEK grinder SF 60 drive wheel repair

This SF 60 is one of the first models of Tormek grinders - a greate machine - but after nearly fourty years the friction drive wheel gave up. So i printed a new one if you download it dont forget to leave a like - thanks The wheel itself…

Downloads
11
Likes
2
Rating
0
P
Printableskevsparky

Waldwerk Coffee Grinder (Kaffeemühle) Tightening Tool

If your Waldwerk Coffee Grinder is like mine, after about 100 coffees, the nut at the top came loose! Hand tightening it doesn't work, as it comes loose again after a few uses 😢 This tool slides into the top of the coffee grinder to hold…

Downloads
11
Likes
5
Rating
0
P
Printableseloekset

Bosh PSM 150 grinder shields

The original grinder shields were broken, so I made a replacement. I tried printing new shields in transparent PETG, but I couldn't get them clear enough, so I bought a clear acrylic plate 4mm and printed frames in black ABS instead. I…

Downloads
5
Likes
0
Rating
0
P
PrintablesHarry Merckel

Replacement Glass Grinder Surface for Glastar Super Star II and Diamond Star

My dad's grinder work surface was getting increasingly worn down and hard to use - and since Glastar is unfortunately no longer in business, brand new work surfaces are increasingly hard to find. It seems a real shame to have to buy a…

Likes
12
Rating
0
P
Printablesmarsl

weed grinder

inspired by some models on thingiverse, but upgraded, some changes were made. It works great! Honestly haven't find better grinder yet. Infill 10-15% is more than enough but you can go with more, depends on how you want your grinder to be…

Downloads
10,640
Likes
558
Rating
4.59
P
PrintablesWakahiru_me

Grinder

Nozzle: 0,4 Supports: NO PLA, PETG I will be happy if you publish your printed model :)

Downloads
6,572
Likes
578
Rating
4.82
P
Printablesordnerino

+++UPDATED+++ Grind Setting Dial V2.0 Universal Fit - Eureka Mignon

The original finecoar Grind Setting Dial V2.0 for all new Eureka Mignon grinders Now also compatible with all* new Eureka Mignon models! For more information, please continue reading under Compatibility. If you'd like to buy a finished…

Downloads
4,968
Likes
364
Rating
4.86
P
PrintablesLittletrev45

Toothless weed grinder with storage

Toothless grinder with storage Now updated with inside corner chamfer PLEASE USE A FOOD SAFE MATERIAL FOR PRINTING

Downloads
4,952
Likes
519
Rating
4.81
P
PrintablesDz1adz1oSamoZlo

Decorative Herb Grinder

Hi everybody! This model is a remix of a grinder by @freightFright_8358. I was using his model and I thought of a few ways of making it better (or just more suited for myself). I present to you two decorative grinders with a hexagonal…

Downloads
3,975
Likes
678
Rating
4.17

Milwaukee M18 Grinder Mount

This will securely hold an M18 grinder or oscillating tool and should work with most other brands as well. I recommend printing with four or so parameters for strength. No supports are necessary. The included holes are sized for #6 wood…

Downloads
3,547
Likes
452
Rating
5
P
PrintablesBobo

Grinder

Hemp grinder Note: New version of this grinder design is available here This grinder was designed for ease of printing with 0.6mm nozzle. Teeth are larger than other common grinder designs. Yet it can produce finely ground herbal…

Downloads
3,405
Likes
456
Rating
4.77
P
PrintablesVC Design

Angle Grinder Disc Holder

Designed for discs with a 22.23 mm (7/8") center hole , it is compatible with a wide range of standard angle grinder discs. Mounted using 3x 4mm screws. Features Mounted using 3x 4mm screws. Prints without supports Perfect for organizing…

Downloads
3,116
Likes
1,036
Rating
4.67
P
PrintablesJohnny0518
18+

The source marked this model as adult content.

Downloads
2,874
Likes
372
Rating
4.67
P
PrintablesAndréG

Drill sharpener for Bosch angle grinder

Drill sharpeners in various sizes for DIY enthusiasts - BOSCH PWS 9-125 CE - FLEX orbital sander The drill sharpener uses high-speed rotation for grinding (FLEX orbital sander), it is set at an angle of 118 degrees in total for both…

Downloads
2,724
Likes
947
Rating
5
P
PrintablesSem

Grinder / Crusher

Herb Grinder with room for a magnet. has been working for some time now without any problems! printed at Layer height 0,15 no supports needed there is room for a small magnet (5mmx2mm) (you will need some glue to hold it in place) In my…

Downloads
2,234
Likes
131
Rating
4.83
P
PrintablesEightyeight

Herb Grinder

Small functional herb grinder, please use food safe filament if you intend on consuming the ground herbs. The small recesses in the centre are for small neodymium magnets, but they are not required for it to function. I printed this with…

Downloads
1,911
Likes
73
Rating
4.67
P
PrintablesBobo

Grinder V2

Behold this new version of my hemp grinder model . It is bigger, stronger and can hold more of your ground herbs. Instead of ⌀ 2mm magnets it now comes with slots for ⌀ 5mm magnets with height 1mm. They should be available worldwide. It…

Downloads
1,858
Likes
217
Rating
5
P

"Herb" grinder

Split the part into objects flipped them to the top and the bottom are on the build plate. printed .2 mm layer Heights. I've only tried it with PETG but since PLA is so hard I think it will work to. Has been used and works well.

Downloads
1,829
Likes
111
Rating
4.75
P
PrintablesGieljan

Angle grinder holder

This is holder/bracket to hang up an angle grinder, designed for a Bosch cordless version. Will probably fit other models as well. Printed with backside flat on the build plate, used support for the overhang. Prusa MK3S+ ; 0,6mm nozzle

Downloads
1,809
Likes
219
Rating
5
P
PrintablesDominikD

Makita 115 mm angle grinder wall mount

Simple wall mount designed to hold Makita 115 mm angle grinder - DGA452Z. Should also fit other similiar grinders with guard diameter less than 145 mm. I used three 4.5 mm countersunk wood screws to mount it MDF board. Attached template…

Downloads
1,741
Likes
202
Rating
4.8
P
PrintablesMaYo

Herb Shredder Grinder Remix

ENGLISH Now printable without support and with a crank! I modified it so that it can be printed without supports. The crank and gears were moved to the front to make it fit better in the drawer. V1 has a crank and, like the original,…

Downloads
1,624
Likes
217
Rating
4.73
P
PrintablestheRealFugazi

Herb Grinder - 4 Piece with Screen

**Plastic/microplastic will be present so I don't recommend using this for consumption.** 4 Piece functional Herb Grinder just like you'd find in store. Surprisingly strong enough for the job. Pieces screw together easy and printed screen…

Downloads
1,531
Likes
202
Rating
4.75
P
Printablesargosytech

Shroom Grinder

FIRST PUBLISHED MODEL! Go easy, y'all. TinkerCAD'd these together to practice designing and because my oldest liked the box I printed for my youngest. Kids… what can you do? It was printed on both my Prusa Mini (Base and Dots) and my…

Downloads
1,524
Likes
326
Rating
4.86
P
PrintablesUbermeisters

Hyphoon - LARGE Herb Grinder

No really its bigger than you are expecting. Print, assemble, grind, enjoy. Mods: Drum Handle - reduced print time, reduced storage, easier handle spinning (lower torque, not an issue to begin with however) Funnel Drawer - Adds sweeping…

Downloads
1,493
Likes
432
Rating
4.83
P
PrintablesSkooter

Angle Grinder Disc Holder

Simple stand to hold your angle grinders' discs in a pancake stack! I can make different heights available and/or a Gridfinity remix if there is any interest. SETTINGS Easy to print, no supports necessary. Use an outer brim if you have…

Downloads
1,488
Likes
474
Rating
5
P
PrintablesVelvia

XL herb grinder with container

A larger herb grinder based on freightFright 's design. Thank you for providing STEP files! This version is quite a bit larger in size, and has a container underneath to collect ground material. Would recommend printing in ABS or ASA and…

Downloads
1,465
Likes
80
Rating
0
P
Printablesordnerino

[finecoar] Grind Setting Dial V2.1 for Eureka Mignon

The updated original finecoar Grind Setting Dial V2.1 for all new Eureka Mignon grinders Print if yourself?! The finecoar GSD V2.1 is fully open source under CC BY-NC 4.0 DEED and the printable files are available on Printables and…

Downloads
1,447
Likes
91
Rating
4.8
P
Printablesordnerino

Grind Setting Dial for Eureka Mignon

Design The Eureka Mignon is a fantastic coffee grinder for espresso or Aeropress as well as filter coffee or French Press. It has only one flaw: The grind is well adjustable, but not well READJUSTABLE. The dial can be adjusted over…

Downloads
1,427
Likes
131
Rating
5
P
PrintablesTravis

Grinder Dust Shroud

This is a vacuum dust shroud for a 4.5in angle grinder, when using a concrete diamond grinding wheel. This cover worked great on my Dewalt 4.5" angle grinder and did a great job reducing/eliminating the dust from grinding concrete. There…

Downloads
1,323
Likes
146
Rating
5
P
PrintablesKlaxxon

Grinder

Print instructions 3x M3x8 screws 3x M3 nuts 10x 4mm steel balls suports only on the cone for the screw holes

Downloads
1,296
Likes
266
Rating
4.92
P
PrintablesMrFlippant

G&S Tire Grinder slot car tyre truing machine RSM

First, the name. G is for Gaub, or Greg, whichever you prefer. S is for Samson, as in Dennis Samson. His original design for a rotating sanding drum machine for whole axles (e.g. pressed on wheels) inspired this design to a great extent.…

Downloads
1,276
Likes
132
Rating
5
P
PrintablesMatthias

Dust extraction for Milwaukee angle grinder M18 FSAG

Designed to clip onto your existing disk guard. Stays in place with friction/clamping. Will fit most Milwaukee battery powered angle grinders (I use it on an M18 FSAG model). Keep in mind that even though my printed version has a strong…

Downloads
1,265
Likes
270
Rating
4.5
P
Printablesbaulum69

Improved Toothless Grinder

This grinder makes herbs smaller so you can smoke them. Print it without support and with PETG. I used 0.2mm layers.

Downloads
1,245
Likes
85
Rating
4.83
P
PrintablesfreightFright

Herb Grinder

This works alright, but isn't very sturdy. Or I haven't yet nailed the temps and etc Print instructions I dry my filament and do solid @0.1mm

Downloads
1,149
Likes
107
Rating
4.88
P
PrintablesThe Builder

HERB GRINDER

link to original model https://www.thingiverse.com/thing:4690330

Downloads
1,112
Likes
159
Rating
5
P
PrintablesDavid Holecko

Angle grinder disc holder

This wall mount bracket allows you to store grinder discs and easily access them when they are needed.

Downloads
1,090
Likes
274
Rating
5
P
PrintablesCarlos Bennett

Herb Grinder Scoop

Here is a perfect scoop for ground herbs and spices! Create your own blend of tea! Print 100% infill. I used PLA

Downloads
1,057
Likes
149
Rating
5
P
PrintablesEasterlightning

Rose herb grinder

I made a remix of the 'Herb Grinder' to have a beautiful rose on top! printed with PLA

Downloads
1,045
Likes
160
Rating
5
P
PrintablesMike Rainbow

Bosch 115mm angle grinder drill bit sharpener attachment

Ive designed something to clamp over the existing guard on a bosch 115mm angle grinder then clamp your angle grinder to a bench to sharpen 12mm, 10mm, 8mm, 6mm, 5mm, 4mm drill bits 2x 90mm 8mm bolts & nuts required. mine are my usual CF…

Downloads
1,026
Likes
149
Rating
5
P
PrintablesWerFra

Bosch 125 mm Angle Grinder Dust Collector

This is a dust collector for Bosch angle grinders. The collector simply slides onto the guard. I designed it for a GWS 18V-15, but it should fit all Bosch 125 mm angle grinders with its style of adjustable guard. Ensure the slot for the…

Downloads
1,012
Likes
111
Rating
4.67
P
Printableskampfwuffi

Tool for sharpening drill bits for PARKSIDE Multi-Grinder

The tool is a remix of the fantastic original model, which is super easy to print and works great. It has been redesigned to fit Parkside (Lidl brand) AC Multi-Tool "Dremel" tool and adds additional features. For small drill bits push the…

Downloads
961
Likes
473
Rating
5
P
Printablesfloblmr

Sage / Breville "the Smart Grinder Pro" Single Dose Hopper

Single Dosing tool for the Sage / Breville Smart Grinder Pro. Maybe it fits also to other machines from Sage / Breville. It minimizes the dead space of the machine to +/- 0-0.1g. Installing Install part1 like in the picture (it prevents…

Downloads
938
Likes
104
Rating
4.91
P
PrintablesMerandey

flexi mermaid fin (LEGO Frinds compatible)

My daugther loves mermaids and playing LEGO, so I modelled and sculped this flexi mermaid fin. Print instructions I optimized this creation for fdm-printer(the base side is as flat as possible). There is one file with support, thats how I…

Downloads
896
Likes
154
Rating
4.93

Tungsten grinder for dremel

When I got a TIG welder, I immediately designed and printed this little adapter for the Dremel to sharpen a perfect tip onto the tungsten. It has integrated dust collection and a feature to mount it on a fixture table with a stud or…

Downloads
890
Likes
82
Rating
0
P
Printablesjanek

angle grinder disc holder 50mm

Wall mounted angle grinder disc holder, 50mm depth. Can hold any kind of discs up to 126mm diameter. Printed with PLA, wall plug and screw required to fix it to the wall.

Downloads
887
Likes
310
Rating
5
P
PrintablesPrintArtisan

Small Pocket Toothless Grinder

⚠IMPORTANT⚠ 1- Only the grid need support 2- If u have tolerance problems adjust your horizontal expansion in your slicer 3- DONT PRINT IT WITH WALL SEAM BECOUSE THE GRINDER WONT ROTATE GOOD , you can hide the seam in wall settings like…

Downloads
878
Likes
84
Rating
5
P
PrintablesRSiCosta

Espresso 51mm Tamper & Distributor plus Grinder

Printed with tamper side to the build plate with supports.

Downloads
855
Likes
81
Rating
5
P
PrintablesSaddamCZ

Espresso GrindDozer – Coffee Funnel, Doser and Distributor

A simple tool for mess-free grinding, dosing and even distribution of coffee grounds in espresso baskets before tamping. The tool consists of two rings that are screwed together with a variable number and sizes of spacers between them to…

Downloads
847
Likes
269
Rating
5
P
Printablesadapterek

Drill Bit Sharpener – Angle Grinder Tool

Description Drill Bit Sharpening Attachment for Angle Grinders – a simple and practical tool for sharpening metal drill bits using an angle grinder. This drill bit sharpener is designed to work with many popular angle grinders. Simply…

Downloads
837
Likes
287
Rating
5
P
PrintablesElias baut was

3D Printed Belt Sander / Grinder (Free version)

I also adapted this machine to fit other sanding belts length and width ( 25×762 , 30×750 , 30×800 , 40×760 and 50×760 ): Printables: https://www.printables.com/model/869218-3d-printed-belt-sander-grinder Cults3D:…

Downloads
804
Likes
517
Rating
0
P
Printablesmanazeda

Angle grinder wallhook

A wall hook, easy to print. The design is used for a 125mm Makita angle grinder but should be compatible with other brands. Can be easily mounted by two 4mm chamfered holes.

Downloads
799
Likes
143
Rating
4.75
P
PrintablesGuido

Angle Grinder Disc Storage

For 115mm and 125mm discs. Can be screwed directly to the wall or it can be mounted to the wall with the adapter. It has holes for 6 x 5 mm magnets, so it can be placed on metal objects, like a bonnet and it doesn’t fall down all the…

Downloads
783
Likes
337
Rating
5
P
PrintablesMyrkaPerse

Makita cordless angle grinder dust cover

Connects your anglegrinder with vacuum cleaner. Lets you sand concrete dust-free with diamond stone. Tape can be used as extra sealant.

Downloads
775
Likes
100
Rating
5
P
PrintablesJorgeelfurioso

ENDER 3 V3 SE Grinding X / Y Belt Fix V1

New 3D printer, new surprises. ---X AXIS----- This piece should prevent any grinding on the X axis belt !!!!-Recommended to push a little higher the X belt catch on the X gantry, be carefull to not do it too much or the belt might come…

Downloads
768
Likes
184
Rating
4.92
P
PrintablesMaciaIT

Toothless grinder v3

INTRODUCION Almost five years ago a friend of mine asked me to print him a custom grinder. Since everything you can find on the internet works poorly i had to design my own version from scratch. This is the third iteration of the design…

Downloads
755
Likes
123
Rating
4.88
P
PrintablesShawn Gano

Grinder Angle Setup Jigs

Jigs to quickly set the angle between a grinder wheel and platform (table). These are made specifically for an 8" grinder wheel and currently come in two angles: 40 and 25 degrees (but this is easily customized in Fusion360). I…

Downloads
753
Likes
127
Rating
5
P
PrintablesCaptAngry

Angle Grinder Wall Mount

I wanted a simple wall mount for my angle grinders. This one is 100% printable without supports and works (at least for my Ridgid 18v grinder). Printed 0.2mm w/ 50% infill. I added a version 2 with additional screw holes as I noted the…

Downloads
745
Likes
95
Rating
5

Timemore chestnut C2 motorized grinder

video Timemore diy motorized 3d printed automated coffee grinder - YouTube Autodesk Fusion 360 assembly (f3z) included. Stl files and 3mf files included. Or you can generate it from Fusion 360. DC motor is available also on conrad web…

Downloads
742
Likes
59
Rating
0
P
PrintablesThibo-do-it

Ryobi angle grinder holder

Reinforced the original

Downloads
729
Likes
98
Rating
5
P
Printablesptashek

Breville / Sage Barrista Grinder Gear (BES875 / BES880)

Breville / Sage Barrista Grinder Gear. Supported models: Express (BES875) - tested Touch (BES880) - confirmed by others These are not available as a separate spare part from Breville (Sage), but are the first to fail if the grinder gets…

Downloads
725
Likes
33
Rating
4.5
P
PrintablesArsen

Herb Grinder

Remix from: https://www.thingiverse.com/thing:2088989 It may seem that a grinder with this shape does not work well, but in reality it works great and is also much more resistant than traditional ones!

Downloads
708
Likes
71
Rating
5
P
PrintablesBert

Tungsten Grinder -- no set screws, no drilling, use your collets!

I have the Eastwood tungsten grinder, but it only has two angles for two different tungsten sizes so I printed the Clough42 design. I bought the set screws, drilled them, but with my Imperial drill bits the fit to the tungsten was not…

Downloads
698
Likes
102
Rating
4.86
P
PrintablesGeorge?

Tech Deck / finger board grind rail

made it to try out my deck

Downloads
687
Likes
52
Rating
5
P
Printablesidig3D

Angle Grinder Chop Saw for EMT Conduit and 2020 Extrusion

Looking for a better way to cut 3/4" EMT conduit, I could buy an expensive blade for my reciprocating saw or find a better way. I saw an angle grinder mount and decided to make my own to fit the grinder I have. UPDATE -- added a guide for…

Downloads
673
Likes
226
Rating
5
P
PrintablesForma3

Weed Grinder XXL Large herb crusher

2 colour grinder with palm tree print. Print with min 40% infill or higher. No need to print with support. You ned to have 10mmx10mm magnet and 10mm washer for the screw (thin).

Downloads
667
Likes
47
Rating
3
P
PrintablesVash Baldeus

Disk Grinder Dust Collection (DeWALT DW4156)

Recently my family decided to remodel some parts of the house, that included cutting some walls using a grinding disk. In order to create channels to hide power cables in. I purchased a DeWALT DWE4156 along with a wall cutting disk, I was…

Downloads
660
Likes
148
Rating
5
P
PrintablesBogumił Proc

angle grinder dust remover 125

angle grinder dust remover 125/230

Downloads
657
Likes
68
Rating
4.75
P
PrintablesCEJ Ing

Angle grinder holder

Angle grinder holder. 5 screws

Downloads
647
Likes
79
Rating
4.75
P
PrintablesSzczepan

125mm Angle Grinder Wall Mount

Maximum width of the grinding wheel cover is 30mm.

Downloads
644
Likes
48
Rating
4.67
P
PrintablesTomAlbi

Grinder

1. Collection Container: Cylindrical shape, capacity of at least 10g. 2. Sieve: Round plate with medium-sized slits. 3. Lid with Grinding Structure: Lid with a simple grinding surface. 1. Auffangbehälter: Zylinderförmig, mindestens 10g…

Downloads
638
Likes
69
Rating
5
P
PrintablesSketch Me To

Angle Grinder Holder for French Cleat Wall

This is a 3D printable angle grinder holder designed for a French cleat wall. It stores the grinder vertically with space below for up to 30 thin cutting discs. After testing three designs, this version features integrated cable wrap…

Downloads
634
Likes
163
Rating
5
P

Grinder

Simple grinder, can be printed quickly, does the job

Downloads
633
Likes
32
Rating
5
P
PrintablesQuietQuacks

Gridfinity angle grinder disc storage

This bin can store any angle grinder disc that is 4.5" and 7/8" or larger arbor. Update: A v2 has been added due to bad tolerance around some grinding and flap discs

Downloads
626
Likes
120
Rating
4.33
P
PrintablesOliver

Stained Glass Grinder Puck

Use the Grinder Puck when pushing glass into the grinding wheel to save your fingers from being cut by the edges of the glass that haven't yet been ground smooth.

Downloads
609
Likes
80
Rating
5
P
PrintablesAdam Cook

Manual Coffee Grinder Conversion (J-Max)

Here is a j-max manual to electric coffee grinder conversion build. Happy printing and thank you for the support! Notes This build requires soldering and de-soldering of a component from the power supply. Soldering mains and dc side will…

Downloads
601
Likes
112
Rating
4.75
P
PrintablesBert

Angle Grinder Disc Holder

The threads on Robin Finkers' model on Thingiverse did not print well on my FlashForge. I also wanted to practice my Fusion 360 skills so I generated this from scratch. Fusion 360 threads print great. I used up several left over spools of…

Downloads
593
Likes
100
Rating
4.25
P
PrintablesCannonballKraut

Herb Grinder

A friend asked me to make him a grinder with multiple bottoms depending on how he wants to use it. So there is a bottom with holes and a catch, and two bottoms without holes for a more compact unit when carrying it around. The bottoms…

Downloads
581
Likes
106
Rating
5