Millennium Falcon 3d model StarWars
Millennium Falcon Scale 1:500
Print approx. €3.20–€3.91 excl. taxPreliminary estimate for one variant
- Downloads
- 6,837
- Likes
- 211
- Rating
- 5
3,895 models
Millennium Falcon Scale 1:500
Print approx. €3.20–€3.91 excl. taxPreliminary estimate for one variant
Please click if you appreciate my work :) The power of a classic meets rebellious tuning – presenting the RWB Porsche 911 (964) Turbo as a wall-mounted 3D print. This model embodies the aggressive style of Rauh-Welt Begriff, reimagined as…
Print approx. €12.80–€15.65 excl. taxPreliminary estimate for one variant
Intro Earbuds Cleaning Tool V2 is a small, easy-to-print earwax remover tool for in-ear headphones and earbuds . It helps you safely remove earwax, dust and debris from your earbuds without damaging the speaker mesh . The first version…
Print approx. €0.10–€0.12 excl. taxPreliminary estimate for one variant
I recreated the design of well known [BRAND NAME] plastic anchors, making one side of the thread flat for easier printing. I used 100% infill to maximize strength, but you might achieve sufficient durability with a lower infill setting.…
Print approx. €2.31–€2.82 excl. taxPreliminary estimate for one variant
Hier das Feuerwehrlogo für Colorchange Farbdruck. The german firefighters logo for colorchange.
Print approx. €1.81–€2.21 excl. taxPreliminary estimate for one variant
This is a hanging drift clip for 1/10 RC drift tracks. Prints in 4 parts. 1 upright - prints flat on the back with the feet pointing up. No supports needed. 1 crossbeam - prints on the side. Supports required under each interlocking…
Print approx. €0.33–€0.40 excl. taxPreliminary estimate for one variant
Minnesota Timberwolves NBA Basketball Team Logo
Print approx. €16.89–€20.65 excl. taxPreliminary estimate for one variant
The source marked this model as adult content.
Print approx. €1.91–€2.34 excl. taxPreliminary estimate for one variant
Bollard key with longer handle and triangular insert. For more comfortable use on bollards with jammed mechanism. Print in PETG or ABS for good durability. Thanks to rflrkn for pointing out that the initial print file had too few infill.…
Print approx. €2.78–€3.40 excl. taxPreliminary estimate for PETGSource material: PET
Ein Schlüsselanhänger für alle Feuerwehr-Fans egal ob groß oder klein. Am besten zweifarbig drucken ;)
Print approx. €0.47–€0.57 excl. taxPreliminary estimate for one variant
Hier eine mehrteilige Überwurfmutter (17mm) für den Gasschlauch von meinem Grill. Die Mutter kann auf dem Schlauch bleiben so das sie nicht verloren geht.
Print approx. €0.90–€1.10 excl. taxPreliminary estimate for PETGSource material: PET
This is a basic wallmount for a Dyson Airwrap. The back face is flat to accomodate 3M adhesive strips which are easily removed without damaging the wall. Printed in PLA with a 0.4mm nozzle.
Print approx. €4.00–€4.88 excl. taxPreliminary estimate for one variant
Design is from Daniel Lilygreen (https://www.myminifactory.com/object/3d-print-star-wars-the-force-awakens-3832) based on it i scaled it to 15% (about 12 cm ball size) and sliced it for 0.4 and 0.6 nozzle size, have fun!
Print approx. €2.30–€2.82 excl. taxPreliminary estimate for one variant
This is a remix of a remix! Asdesign's remix of MakerBot's flamingo is quite charming, but I didn't like its splayed-sideways leg position. I decided to remix it to put the legs in a forward/backward “walking” position. The flamingo…
Print approx. €0.89–€1.08 excl. taxPreliminary estimate for one variant
It´s a centering L-Bar for marking the center on square or round posts, why spend Eur 18 on Amazon (even a printed one) when you can print it yourself? Print instructions I used 0.4mm nozzle
Print approx. €1.99–€2.43 excl. taxPreliminary estimate for one variant
Calibration Cube - Furniture knob Simply print one of the two variants (with printed M4 thread or for threaded inserts). Suitable M4 screws are required, the length of which depends on the thickness of the furniture fronts. The print file…
Print approx. €0.88–€1.08 excl. taxPreliminary estimate for one variant
Das ist eine Halterung für das Zubehör vom Dyson-Airwrap. Diese bietet Platz für 4 Stk. Lockenaufsätze und die Föhn-Düse. Auf der Rückseite sind zwei Schraubenhalterungen angebracht. Somit sind die Montageschrauben nicht sichtbar.
Print approx. €8.60–€10.51 excl. taxPreliminary estimate for one variant
Brändi Dog Erweiterung für 3 Spieler - das Brettspiel wird eigentlich immer zu viert gespielt. Mit dieser Erweiterung kannst du das Spielbrett auf 3 Personen anpassen und zu dritt - alle gegen alle spielen. Print Settings Printer Brand:…
Print approx. €0.81–€0.98 excl. taxPreliminary estimate for one variant
A super easy print to keep your battery away from the gears on your Redcat Ascent. Here is where I installed it: No supports needed. I printed in PLA and it worked fine!
Print approx. €0.66–€0.81 excl. taxPreliminary estimate for one variant
Stackable, holds 16 Featherweight bobbins measuring 7.5x22mm, fits inside Model 68 cabinet
Print approx. €4.38–€5.36 excl. taxPreliminary estimate for one variant
Does your child's ride need an upgrade? Do they drive their favorite power wheels all around the neighborhood, but don't have room for all their tag-along toys? Look no further than this awesome tow hitch receiver system (and adapter…
Print approx. €11.26–€13.76 excl. taxPreliminary estimate for PETGSource material: PET
This nozzle is to make DM Air Freshener refill work in an Airwick auto dispenser. It is made with conically narrowing inside, to make it dispense the aerosol as best as possible. It can even replace the original Airwick nozzle on an…
Print approx. €0.12–€0.14 excl. taxPreliminary estimate for one variant
Luthen Raels Fondor Haulcraft : Andor : StarWars
Print approx. €8.67–€10.60 excl. taxPreliminary estimate for one variant
I wanted to create a Pokemon themed checkers piece for a gift and came across the mandalorian checker piece by nat_a_cyborg and really loved the textured outer ring they used on their design. So I started with their design and removed all…
Print approx. €4.66–€5.69 excl. taxPreliminary estimate for one variant
This is a sign to tell unwanted visitors of your property, that you have active CCTV cameras running. The sign is in German telling “property video monitored”. This model is optimized for a 0.3mm layer height. This keeps your print time…
Print approx. €2.84–€3.48 excl. taxPreliminary estimate for PETGSource material: PET
I don't enjoy having an actual cover attached to my kindle while reading, but I'm also not comfortable throwing it in my backpack coverless, so I quickly designed this case. It has quite a snug fit but it does slide easily, so I added an…
Print approx. €3.70–€4.52 excl. taxPreliminary estimate for PETGSource material: PET
This basic roman column container measures 34.8 mm x 40 mm and is 56 mm high. You can use it as a stand to add importance to any small object, as a container, or as the start for a miniature Vaporwave party. The lid and the bottom of the…
Print approx. €1.66–€2.03 excl. taxPreliminary estimate for one variant
Gardena union nut (custom thread) sparepart for garden shower. Sparepart from Gardena: https://www.gardena.com/de/produkte/sparepartscategory/009540010217/ Gardena Überwurfmutter (spezielles Gewinde) Ersatzteil für Gartendusche Ersatzteil…
Print approx. €0.86–€1.05 excl. taxPreliminary estimate for one variant
This is a very easy fixture for the Dyson Airwrap. You can use it to attach the Airwrap to anything in your bath- or dressing room. The printable file includes both parts. The lower part is tilted by 15° and printed inclined. Using this…
Print approx. €2.81–€3.44 excl. taxPreliminary estimate for one variant
Zentrierwinkel für Rundmaterial und Rechtecke Für kleine Rundmaterialien oder Rechtecke. Rechteck max.: 80x80mm Rundmaterial max.: 80mm
Print approx. €0.52–€0.63 excl. taxPreliminary estimate for PETGSource material: PET
Level Holder for Systainer This holder is designed for a Stabila Level (60 x 30 mm) and works perfectly with Systainers. Details: Printed in PETG with 5 perimeters for added durability. The clip-in version can be printed without supports.…
Print approx. €2.85–€3.48 excl. taxPreliminary estimate for PETGSource material: PET
Seit einigen Jahren haben wir für unsere Weihnachtsgeschenke Stoffbeutel statt Geschenkpapier verwendet. Die Beutel konnten jedes Jahr wieder verwendet werden, sind mit Kordeln verschlossen und hatten jeweils ein Anhänger mit Namen. Diese…
Print approx. €0.22–€0.27 excl. taxPreliminary estimate for one variant
I purchased some 775 motors with a 19 tooth pinion gear from online with the objective to mount it to my kids' PowerWheels. Didn't get around to it until recently. The 19T pinion doesn't line up with the stock gears and as such it needs…
Print approx. €0.32–€0.39 excl. taxPreliminary estimate for PETGSource material: PET
found on thingiverse print settings: Prusa mini+ No Rafts No Supports Resolution: 0.2 Infill 15% Prusa PETG
Print approx. €3.05–€3.73 excl. taxPreliminary estimate for PETGSource material: PET
Ständer für Handschuhe, dadurch lassen sich gerade die Torwarthandschuhe sehr gut trocknen und lüften!
Print approx. €10.32–€12.62 excl. taxPreliminary estimate for PETGSource material: PET
EN: This is a dock I have designed for our ABC Design Stroller “Salsa 4” or better said for the carrycot that is part of the set. I wanted to build a table for the living room with the docks attached on the top to easily use the carrycot…
Print approx. €1.94–€2.37 excl. taxPreliminary estimate for PETGSource material: PET
Show your love for the iconic Tupperware Salad Bowl with this adorable keychain! This meticulously designed, miniature replica captures all the details of the beloved container. Perfect for Tupperware enthusiasts, collectors, or anyone…
Print approx. €0.30–€0.37 excl. taxPreliminary estimate for PETGSource material: PET
Blood Group Keychain (all types) + Your Information Text / Brelok z Grupą krwi i informacjami do kontaktu. A+ , A-, B+, B-, AB+, AB-, 0+, 0- Below are videos on how to edit the inscription on the back of the keychain How to ADD any Text…
Print approx. €0.19–€0.23 excl. taxPreliminary estimate for one variant
This calibration cube has a chamfer on the edges and no letters on the sides. Advantage is, that you can precisely measure it with a caliper. After the print you have to write the axis on it with a pen. Size is 20 mm by 20 mm by 20 mm.
Print approx. €0.38–€0.47 excl. taxPreliminary estimate for PETGSource material: PET
Dyson Airwrap Clamp
Print approx. €0.38–€0.46 excl. taxPreliminary estimate for one variant
I offer a set of parts for holding the phone more securely. New parts are fully compatible with original parts. The presented set includes two arm.stl options (for a large phone in a case and for a thinner phone) and two options for the…
Print approx. €1.93–€2.36 excl. taxPreliminary estimate for one variant
Centring angle for marking the centre or a 45 degree angle on round or square workpieces. There are two hexagonal holes on the underside for pressing in or gluing Ø7x1 magnets. Zentrierwinkel zum Anzeichnen der Mitte oder eines…
Print approx. €2.37–€2.90 excl. taxPreliminary estimate for one variant
I created this try to help me stay organized and balance finding, putting away and space efficiency. Large, readable size labels allow wrenches to be stored on edge, you can tell at a glance when a wrench is missing. Generous finger slot…
Print approx. €5.09–€6.22 excl. taxPreliminary estimate for PETGSource material: PET
Für Rundmagnete 8 mm x 3 mm
Print approx. €0.09–€0.11 excl. taxPreliminary estimate for one variant
Auf dem Deckel ist das Symbol und der Titel eingeprägt, sodass durch einen Farbwechsel auf Höhe 0,5mm das Symbol farbig hinterlegt werden kann. Die zweite Variante kann mithilfe der MMU farbig ausgedruckt werden. Im Boden der Dose ist die…
Print approx. €1.18–€1.44 excl. taxPreliminary estimate for one variant
Just a simple clamp to "get a hold" on the Vorwerk Kobold 300s vacuum arm. The inlay of the clamp is coated with foram. The clamp itself is fixed with long M3 screws (but also can be customized). Foam:…
Print approx. €2.57–€3.14 excl. taxPreliminary estimate for one variant
Auf dem Deckel ist das Symbol und der Titel eingeprägt, sodass durch einen Farbwechsel auf Höhe 0,5mm das Symbol farbig hinterlegt werden kann. Die zweite Variante kann mithilfe der MMU farbig ausgedruckt werden. Im Boden der Dose ist die…
Print approx. €1.56–€1.91 excl. taxPreliminary estimate for one variant
I have bought a Makita battery powered vacuum since I already had the batteries. Since I have a lot of Vorwerk accessories I needed an adapter but none of the available ones would fit. Therefore I combined the models by parkis and…
Print approx. €3.23–€3.95 excl. taxPreliminary estimate for one variant
Hier das Model zur praktischen Lagerung der einzelnen Karten. Die Karten findet ihr unter Wewölfe vom Düsterwald hier bei Printables. Gedruckt mit Prusa PETG in der Druckeinstellung schnell, alles Standardeinstellungen
Print approx. €2.31–€2.82 excl. taxPreliminary estimate for PETGSource material: PET
I absolutely hate loose pencil sharpeners! They make a huge mess, are hard to get a great grip on, and are easy to misplace. Sometimes it's not so simple as grabbing a different sharpener either; Derwent Pastel Pencils are a unique size…
Print approx. €2.22–€2.72 excl. taxPreliminary estimate for one variant
A little box for four sugar cubes. I designed it für cubes in the size of 16 mm x 16.5 mm x 11 mm. I uploaded also the *.f3d file, thus you can adjust it. You have to print it twice.
Print approx. €0.58–€0.70 excl. taxPreliminary estimate for PETGSource material: PET
A magent sized 30x30x6,89mm with the logo from a german soccer club (Rot Weiss Essen). In the BGCODE is a pause for a 15mmx2mm magnet and a colour change at the end for the logo finish. Printed on a Prusa Core One
Print approx. €0.20–€0.24 excl. taxPreliminary estimate for one variant
I used a 6 mm metal rod I had lying around and redid the round part as well to make it fit well… editable flies included in case you need to adapt in some way…
Print approx. €1.17–€1.43 excl. taxPreliminary estimate for one variant
Adapter um an den 160mm Flex-Schlauch einen vernünftigen Abschluss hat um den schlauch in die Wärmepumpe zu stecken. Dieser wir im Herbst und Frühling immer gedreht daher sollte es schon gut zu händeln sein.. auf den letzten zwei Bildern…
Print approx. €4.23–€5.17 excl. taxPreliminary estimate for one variant
Gedruckt in PLA mit MK4
Print approx. €7.60–€9.29 excl. taxPreliminary estimate for one variant
The tool holder has an indicator on top to show how to lock the different tools. Works with the newest Dyson AirWrap i.d. model. Tools sit tight. The holder can be attached to a wall using double sided tape. The spare on the backside…
Print approx. €0.93–€1.14 excl. taxPreliminary estimate for one variant
This model is a great way to organize all of your silverware items!
Print approx. €23.83–€29.12 excl. taxPreliminary estimate for one variant
Aufsatz für Bauhaus Wasserwage zum leichten anzeichnen der Nagel oder Schraubenposition
Print approx. €0.62–€0.75 excl. taxPreliminary estimate for one variant
The source marked this model as adult content.
Print approx. €0.35–€0.42 excl. taxPreliminary estimate for one variant
Make sure you push in the two triangles close to the short end of the command strip first and tilt down towards the long end to snap into place. Compatable with all the channel models that David D has created. If you have any issues…
Print approx. €0.30–€0.36 excl. taxPreliminary estimate for PETGSource material: PET
Model of the safety plug used to arm the nuclear weapon that was dropped on Hiroshima. Made as a reminder of the tragedy that the human lust for innovation can spawn (Also as a paperweight). Print details: Pretty much any orientation you…
Print approx. €4.89–€5.98 excl. taxPreliminary estimate for PETGSource material: PET
This astronomical adapter allows the use of 1" 1/4 (31.75 mm) internal diameter astronomical mount counterweights on 1" (25.4 mm) diameter rods. The adapter is drilled to allow passage for the counterweight locking screw on the rod. The…
Print approx. €0.81–€1.00 excl. taxPreliminary estimate for PETGSource material: PET
Premier jet pour le poussoir moulin de tupperware
Print approx. €4.95–€6.05 excl. taxPreliminary estimate for one variant
Ausschnitt/Relief der Stadt Bigge/Olsberg - NRW - Germany
Print approx. €2.69–€3.29 excl. taxPreliminary estimate for one variant
EN: The stand or paperweight has a built-in M16 nut that is inserted inside the model during printing. Recommended printer settings: - the first layer and all subsequent layers must be 0.2mm - the supports must be switched off - it is…
Print approx. €0.82–€1.00 excl. taxPreliminary estimate for PETGSource material: PET
A protective plastic cover for the body mount of a PowerWheels Jeep.
Print approx. €1.97–€2.41 excl. taxPreliminary estimate for PETGSource material: PET
EN: Just a paperweight... created out of leisure. It has been treated/patinated with “TIFOO” blue patina. Caution: corrosive, follow instructions for use! The size can be varied depending on the required weight and available material. The…
Print approx. €2.81–€3.44 excl. taxPreliminary estimate for one variant
Vogel-Futterhaus mit Auffangschale. Da die Vögel oft eine ziemliche Schweinerei ums Futterhaus machen, kann hier eine Auffangschale angehängt werden. Oft ist das Futter qualitativ noch einwandfrei und dann darum wieder eingefüllt werden.…
Print approx. €17.87–€21.84 excl. taxPreliminary estimate for PETGSource material: PET
A bumper for Adafruit's FeatherWing Quad 2x2.
Print approx. €1.87–€2.28 excl. taxPreliminary estimate for one variant
Mesoamerican Goddess of Underworld
Print approx. €6.72–€8.21 excl. taxPreliminary estimate for one variant
Underware is the universal, open-source, modular, extensible and re-usable solution for managing cables, mini-pcs, usb devices…pretty much anything, anywhere! Watch this video to find out more: Key Points Open-source design - The whole…
Holder for Tupperware lids (for kitchen organisation). Big and small versions. Should fit most kinds of lids, but obviously YMMV. Can be printed without any supports if your printer can handle a little bridging (I printed the ones in the…
A Christmas Update | V4 is Here! 🎄 12/09/2024 This update marks the final version of my iPhone Standby Dock Remix, and I couldn’t be prouder to share it with you all. Creating this has been a monumental task—I went through and completely…
A few years ago I made this as a rendering for my kitchen backsplash. At some point I thought, why not print it out and put it on a shelf? It's a tribute to the legendary photo from the New York Times "Lunch atop a skyscraper" and of…
A lamp with a lithopane of the deathstar from starwars This is a remix of the "Designer lithophane moon lamp", it use the same stand or adapter. Print instructions Deathstar Infill: 100 % or solid 4-5 perimeters Layer: 0,2 mm Supports:…
Intro A super-simple 3D-printed cleaning tool designed specifically for earbuds and in-ear headphones . It removes accumulated earwax and debris quickly and safely, helping restore sound quality and hygiene — all with a very short print…
Cute spider on a web in the corner on his print-in-place web. Space for (4) 12mm (1/2") magnets to stick to a metal door frame, or just tape/command strip in place. Mine also stuck to the metal corner beads of unframed openings at my…
Use the pliers to separate the parts and then assemble the car. The model is on a scale of 1:64. To scale a model from 1:64 to 1:43, you need to use a scaling factor of 148.8% in the slicer Printing this model with multicolor produces a…
This 3D model was originally created by Scott Yu-Jan and is shared under the CC BY-NC 4.0 license. You can find the original file on Makerworld: https://makerworld.com/en/models/615378#profileId-538769 License:…
Fan made Star Wars chess set. Made with my students in class (grade 8). We used existing models we found online to create chess pieces out of them in tinkercad. Some are exceptionally good, some could do better. But somebody else might…
This is the openGrid adaption of the Underware system by Hands on Katie . The channels can be directly snapped onto the openGrid base board - the lite board version increases print speed and reduces filament usage. See my introduction…
Die 3D-gedruckte Abfalltonne im Maßstab 1:6 für ein Puppenhaus ist ein beeindruckendes Miniaturmodell. Dieser Bausatz enthält eine detaillierte Tonne mit folgenden Merkmalen: Öffnender Deckel: Die Abfalltonne verfügt über einen…
Create your own DT series Sentry Droid and take over the galaxy! Description: This is a KIT CARD of a DT series Sentry Droid. After a long time I felt like designing a kit card again. This will be a great gift for friends who love Star…
After printing both versions of the center case that supported the addition of the hydrometer, I realized that while the second case looked better aesthetically it did not function well due to the lack of airflow around the unit. Remixed…
Japanese pattern bookmark (5 patterns + STARWARS pattern) Recommended settings are : X:30mm Y:60mm Z:1mm <In order from the top left> ・Asanoha Pattern ( Nezuko Pattern from Demon slayer ) → It contains the wish for the healthy growth of…
Tupperware lid holder for 12 lids.
Version 2 of the Airwolf model. This model is based on the basic design by Hans Meyer at Grabcad, remixed, STL's fixed, updated, missing parts added. The front fuselage needs to be printed heavier (30% infill) as opposed to the rear parts…
This is a customizable silverware holder that fits your specific silverware like a glove. No more sloppy generic buckets. As an added feature, it can stack with other gridfinity modules to make even better use of the drawer space. Note:…
This REMIX Was made to fit an iPhone 13 pro and an iPhone 14 with a standard case. This may fit other iPhone models, but will need to test it at your own risk. DISCLAIMER: Please be careful when ejecting your iPhone. Always have your…
''I'm a one-man apocalypse.'' I present you Roadhog in his tuckered out emote pose. Roadhog is one of the heroes in Overwatch. He is a bodyguard and an international criminal who is infamous for being an unforgiving cutthroat with a…
Model of the Elder Wand from the Harry Potter series. This is a 2-part wand which goes together without magnets or glue. The joint isn't noticeable. The assembled wand is 15" / 38cm long. .02mm layers 2 walls 15% Infill The print profile…
The Unicorn of the sea now comes you a printer near you! This cute little narwhal comes in three different styles: Alone - They are just out here catching some sun living their best life On a rock - Relaxing on a rock trying to do their…
MechWarrior Online Timberwolf, roughly 130mm tall. Fully articulated, and tested, all parts should be 100% printer friendly and error free. Most of the joints are the same as the Articulated MWO Timberwolf by 7Fish (…
this whistle contanis major improvements compared to my V29.1 whistle. please be careful and use it responsibly. The whistle responds very easily due to an improved labium. It provides lesser air consumption aswell I built in reflectors…
This is one of the toroidal propellers we've tested in this video: https://youtu.be/w90gM7bGdvk This is the right propeller. To get the left version, simply reflect it in the slicer. We've achieved the avg max speed of 2.26 m/s, at 1079W…
EDIT ------------------------------------------------------- 2023.08.10. On request from Chris Ondrovic added frame parts without side ventilation (holes only on front side) 2023.03.26. Added STL for Alu profiles caps. Printed from…
Good results without any support-structures. Print needs 25h with a Creality Ender 3 S1 Pro and 60mm speed (via Klipper). Because of the enormous number of edges, you should do some fine-tuning in optimizing the speed at corners and the…
Summon the Spirit of the Frozen Sea – the Arctic Narwhal! 🐋🦄❄ Rising from the icy depths beneath shimmering auroras, the Arctic Narwhal glides silently into your world. With its elegant spiral horn and smooth articulated body, this…
Click connector plate for attaching power supply units or power strips to Multiboard with cable ties. (Matching the “Underware” cable management system from HandsOnKatie.)
Thanks Black Tie, that worked a treat ; ) Hopefully this is what your after : ) I sharpened one with more defined lines and left the other smooth, so your choice : ) As always check the sizing suits your needs and post some picks if you…