Hanging Drift Clip - 1/10 Scale RWD Drift
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Hanging drift clip for 1/10 rc drift cars
- Rating
- 5 / 5
- Likes
- 123
- Downloads
- 788
- Makes
- 2
- Views
- 3,226
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- RC & Robotics
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a hanging drift clip for 1/10 RC drift tracks.
Prints in 4 parts.
1 upright - prints flat on the back with the feet pointing up. No supports needed.
1 crossbeam - prints on the side. Supports required under each interlocking tooth. Very minimal. BARELY fits on the MK3S printbed. Literally have to turn it slightly.
1 foot - prints without supports on it's side.
1 hanging drift target - use a LARGE brim inside and outside to keep it attached while it prints standing up.
EDIT: Added a “v2” version of each file.
- The clip itself has more support around the top loop. My son dropped my original…and it broke.
- The crossbeam has been shortened on the backside, and lengthened on the overhang. Less balanced, but more versatile depending on your usage.
- The upright and foot now have pre-created holes for mounting, if you need it.
EDIT #2: I have now also added a “Drift Hit Wall-Mount” alternative for tighter locations. It simply screws straight to the wall.
You can see this drift clip working on my YouTube channel: