Search results: sant

Sort order

2,228 models

P
PrintablesPeter Farell

Santa Muerte & Requiem for the Sketchfab

As the Sketchfab store is set to shut down in just days, we're facing an uncertain future. In a few months, it may become impossible to share 3D models freely. This community holds a special place in my heart, and I plan to continue…

Print approx. €5.52–€6.75 excl. taxPreliminary estimate for one variant

Downloads
1,926
Likes
285
Rating
5
P
PrintablesRichard

Christmas Card Snap-Together Santa’s sleigh

This kitcard is designed in Fusion360. The model from fotos is printed on Prusa mini+ with nozzle 0,4mm. Material is Prusament PLA vanilla white. You can check the print file for more info but its easy and fast print. Please share your…

Print approx. €1.16–€1.42 excl. taxPreliminary estimate for one variant

Downloads
1,679
Likes
322
Rating
5
P
PrintablesJP3D

Santa Hat for your Benchy

Turn all your benchys into festive christmas benchys with this santa hat. Print - Paint - Push on - Share your Make Important note: Load the file into prusa slicer. Fuzzy skin will be active for the two white parts of the hat. Just change…

Print approx. €0.90–€1.10 excl. taxPreliminary estimate for one variant

Downloads
603
Likes
90
Rating
5
P
PrintablesMonster Made

Christmas Glasses - Santa

Print with PLA 0.2mm QUALITY Infill 15% Bed Temperature 70 for without printer enclosure No support needed Printing orientation please check with gcode file

Print approx. €0.08–€0.10 excl. taxPreliminary estimate for one variant

Downloads
572
Likes
190
Rating
5
P
PrintablesMiniWorld3D

Santiago de Compostela Cathedral, Obradoiro Facade - Galicia, Spain

🇪🇸 ¡Bienvenidos a Santiago de Compostela! This model was created in collaboration with 3D artist Marc Mons . NOTE - This model cannot be sold physically or digitally, even if you are a subscriber of the MiniWorld Reseller License tier. It…

Print approx. €2.09–€2.55 excl. taxPreliminary estimate for one variant

Downloads
477
Likes
64
Rating
5
P
PrintablesRevaĵo

Santa Hat for vvk187 Lego Man Toilet Paper Holder

We love the giant lego toilet roll holder created by vvk187 - https://www.thingiverse.com/thing:1996077 However, we wanted to have him festive at Christmas! Friction fit, easily remove with a little force, no glue required. STEP can be…

Print approx. €5.24–€6.41 excl. taxPreliminary estimate for one variant

Downloads
458
Likes
144
Rating
5
P
PrintablesLudo B

schuifmaat klepje, battery caliper cover, soupape à étrier coulissant, válvula de pinza deslizante.

Na het proberen van de cover van 4D_printer heb ik er zelf 1tje getekend. Mijn schuifmaat heeft een andere vorm. After trying the cover of 4d_Printer I drew one myself. My caliper has a different shape.

Print approx. €0.09–€0.12 excl. taxPreliminary estimate for one variant

Downloads
257
Likes
21
Rating
5
P
Printablesfifindr

Mini Santa Buddy

Meet the Mini Santa Buddy — the jolliest member of the Mini Buddies collection! 🧠 Be extra careful when removing supports — the little pom-pom on the hat is fragile! 🎅 Height: only 12.5 mm ✨ Full of festive details — tiny hat, belt, and…

Print approx. €0.13–€0.16 excl. taxPreliminary estimate for one variant

Downloads
219
Likes
35
Rating
5
P
Printablesfifindr

Sitting Santa

Meet the Sitting Santa — a cheerful Christmas edge-sitter bringing instant holiday joy! 🎅 Height: 60 mm 🎁 Designed to sit perfectly on shelves, tables, or window sills A fun and heartwarming decoration that fits right into any festive…

Print approx. €1.27–€1.55 excl. taxPreliminary estimate for one variant

Downloads
209
Likes
26
Rating
4.33
P
Printablespaho

Santa Claus 5 color Refrigerator Magnet for MMU

I discovered a free-to-use Santa Claus clipart online and converted it into an SVG file using Adobe Illustrator. From there, I designed a multicolored 3D-printable model, specifically for use with a multicolor 3D printer. To assemble:…

Print approx. €2.47–€3.02 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
200
Likes
17
Rating
4.67
P
PrintablesPeter Farell

Santa Skulls 3 Christmas Ornament

Native American Design Elements Santa Skulls 3 Christmas Ornament

Print approx. €9.05–€11.06 excl. taxPreliminary estimate for one variant

Downloads
156
Likes
63
Rating
5
P
Printablesfifindr

Mini Santa

Meet the Mini Santa — the tiniest bringer of Christmas cheer! 🎅 Height: 22 mm 🎄 Perfect for Christmas dioramas, shelf displays, or miniature collections A small but mighty Santa ready to spread festive joy everywhere! Use tree supports on…

Print approx. €0.26–€0.32 excl. taxPreliminary estimate for one variant

Downloads
140
Likes
26
Rating
5
P
PrintablesPeter Farell

Santa Skulls 4 Christmas Ornament.

Santa Skulls 4 Christmas Tree Ornament.

Print approx. €4.06–€4.96 excl. taxPreliminary estimate for one variant

Downloads
130
Likes
42
Rating
0
P
PrintablesPeter Farell

Ukrainian Folk Design Santa Skull Ornament.

Ukrainian Folk Design Santa Skull Ornament.

Print approx. €4.37–€5.34 excl. taxPreliminary estimate for one variant

Downloads
115
Likes
46
Rating
5
P
Printables3DTimon

Cute Santa Claus – Christmas 3D Print Figure

🎬 Video: Watch how this festive 3D model comes to life, layer by layer. https://www.tiktok.com/@3dprintfactoryat/video/7540265970645110038 ℹ Description: This chibi-style Santa Claus figure was custom-designed to blend cute proportions…

Print approx. €4.66–€5.69 excl. taxPreliminary estimate for one variant

Downloads
113
Likes
11
Rating
0
P
PrintablesFC2M3D

The Chubby Santa Keychain

Design Concept The Chubby Santa Keychain captures the festive cheer associated with the Christmas season through a delightful and robust design of a friendly Santa Claus. Use This keychain is perfect for adding a touch of holiday spirit…

Print approx. €0.20–€0.25 excl. taxPreliminary estimate for one variant

Downloads
103
Likes
11
Rating
5
P
PrintablesFilcuk

Palo Santo Incense Stand [r.2]

A very simple incense stand for palo santo . Whilst the stand works for all palo santo pieces I've tried, I imagine the shapes and sizes can vary wildly. Please check the drawing prior to printing. Usage Press the piece into the grip…

Print approx. €0.45–€0.55 excl. taxPreliminary estimate for one variant

Downloads
69
Likes
13
Rating
5
P
PrintablesHannes

Pocket Santorini Meeple

I redesigned the original models to be a bit more sturdy and less likely to break. Printing Instructions: 100% infill Do not go too fast or too hot, because of the thin handles. I printed the first layer at 210°C and the subsequent ones…

Print approx. €0.50–€0.61 excl. taxPreliminary estimate for one variant

Downloads
62
Likes
7
Rating
5
P
PrintablesPolyForge

Cône souriant – Figurine amusante 3D

Ce modèle représente un cône de signalisation classique transformé en personnage rigolo grâce à un grand sourire expressif . Parfait pour décorer un bureau, une chambre ou une imprimante 3D ! Impression : Adaptée aux imprimantes FDM et…

Print approx. €1.72–€2.10 excl. taxPreliminary estimate for one variant

Downloads
41
Likes
8
Rating
0
P
PrintablesFish Guy

Articulated Big Gingerbread man with Santa hat

Big Gingerbread man with Santa hat and flexible

Print approx. €1.50–€1.83 excl. taxPreliminary estimate for one variant

Downloads
19
Likes
2
Rating
0
P
PrintablesRay Fox

Santa Face

Multi color Santa's Face using single Nozzle with three (3) color changes.

Print approx. €0.83–€1.01 excl. taxPreliminary estimate for one variant

Downloads
12
Likes
3
Rating
0
P
Printablesh2odragon

Dear Santa signs

100x160mm signs, with art of Santa and varied “Dear Santa” requests for presents: “nice and naughty is a spectrum” “please bring puppy, and take sister” “may i please have an elf?” i want a pony (and world peace) Mesh and Solid (may print…

Print approx. €1.79–€2.18 excl. taxPreliminary estimate for one variant

Downloads
11
Likes
4
Rating
0
P
PrintablesMark Hartman

Santa Claus Waving

This was an AI created sculpture of Santa because I needed a 3d Santa to go with a sleigh I printed and the whole celebration would have felt empty without Santa in the scene near the tree!! This is for personal use and not for sale. You…

Print approx. €4.46–€5.45 excl. taxPreliminary estimate for one variant

Downloads
6
Likes
2
Rating
0
P
Printablesbollibe

Moulage de tuiles pour santons - Tile molding

Moulage de tuiles pour santons - Tile molding dimensions tuiles : 28mm x 12mm x 3.5mm épaisseur 2mm

Print approx. €1.08–€1.33 excl. taxPreliminary estimate for one variant

Downloads
4
Likes
0
Rating
0
P
PrintablesMaxT

Christmas Door Trim Corner 18 - Santa Sleigh and Reindeer and Christmas Tree (Christmas ornament)

https://www.buymeacoffee.com/maxt ---------------------- 4mm thick to ensure stability The model will fit on Prusa Mini+ (180x180) Feel free to size it up or down as you wish The best quality is achieved if printed face down Print: 0.2mm…

Downloads
7,243
Likes
1,619
Rating
4.96
P
PrintablesGelap

Santa Claus - Solid

This is a remix of Santa Claus by sb43201. https://www.thingiverse.com/thing:2702723 From the orginal designer: "PLEASE remember this is a non-commercial license--make for yourself or as gifts to give-away to friends and family. If you…

Downloads
6,710
Likes
524
Rating
4.98
P
PrintablesMaxT

Christmas Door Trim Corner 60 - Santa Sleigh and Reindeer (Christmas ornament)

https://www.buymeacoffee.com/maxt ---------------------- 4mm thick to ensure stability The model will fit on Prusa Mini+ (180x180) Feel free to size it up or down as you wish I strongly suggest sizing it up to fit your entire heat bed as…

Downloads
4,453
Likes
838
Rating
5
P
PrintablesChirimorin

Mini Santa Hat (manual filament swap friendly!)

A quick print to add some festivity to small objects. Requires only a single filament change. There are two versions of the model, one with a built-in brim on the ball for easy printing and one that has no additional supports in case you…

Downloads
4,386
Likes
945
Rating
4.95
P
Printables3D MAGIC

Santa’s Winter Village Scene

Christmas Ornament – Santa’s Winter Village Scene Bring some festive cheer to your home with this beautifully detailed Christmas tree ornament ! This 3D print features a cozy winter village with snow-covered houses, pine trees topped with…

Downloads
3,867
Likes
673
Rating
4.56
P
PrintablesGradyMakes

Cute Santa

A Cute little 3d model I made for Christmas. Here's The Link For the filament I used! It Works Wonderful, and is only $13.98, Overture PLA Red: https://amzn.to/4i6sF2T If You have a Smaller Budget, Here's Some Super Smooth PLA from…

Downloads
3,511
Likes
436
Rating
4.37
P
PrintablesQuist

Big Santa Lego inspired

I have found 2 different Lego Santa models online and combined different components down to one model and scaled it to the approximately 40cm height (15.75 inches) I have used the model from this https://www.thingiverse.com/thing:3355544…

Downloads
3,330
Likes
786
Rating
4.88
P
Printables29flo

Santa Claus Geometric Design

Here is: Christmas Wall Decoration - Santa Claus Geometric Design Fast and easy 1 color print. You can adjust the scale as desired, but be mindful not to make it too thin.

Downloads
3,279
Likes
643
Rating
4.94
P
PrintablesMaxT

Santa Sleigh in a bauble (Christmas tree ornament)

https://www.buymeacoffee.com/maxt ---------------------- 2mm thick The best quality is achieved if printed face down Print: 0.2mm Nozzle: 0.4mm Support: Not needed Brim: Not needed Infill: Not needed, but I'd suggest going with 100% to…

Downloads
3,018
Likes
435
Rating
4.76
P
PrintablesSabre Design

Christmas Santa decoration (tealight compatible)

Modern and minimalistic Santa decoration, fun and stylish deco for this year's christmas season. All parts can be printed seperately, no need for MMU. The body of santa has a hole on the bottom to insert an electronic tealight, which will…

Downloads
2,483
Likes
990
Rating
4.86

resistor lead forming tool - component bender - plieur de composants

This is a 3D printable file to get a component bender (CBH5). Series Description 0.3": 2 positions 0.4": 4 positions 0.5": 8 positions 0.6": 7 positions 0.7": 7 positions For bending of electronic components to a standard pitch size Base…

Downloads
2,431
Likes
149
Rating
4.89
P
PrintablesMaxT

Christmas Door Trim Corner 57 - Santa Sleigh and Reindeer (Christmas ornament)

https://www.buymeacoffee.com/maxt ---------------------- 4mm thick to ensure stability The model will fit on Prusa Mini+ (180x180) Feel free to size it up or down as you wish I strongly suggest sizing it up to fit your entire heat bed as…

Downloads
2,280
Likes
489
Rating
4.81
P
Printableskrutooo

More figures for Prusa balance game - Darth Vader, Stormtrooper, Mandalorian, Yoda, Dwayne The Rock Johnson, Pinguin, Tux, Snowman, Christmas Tree, Gnome, Santa, Benchy, Pikachu, Cyndaquil, Totodile, Bulbasaur, Squirtle, Charmander, Moai, Football Player

If you like the model, please give a like 💟 and post your prints 📸. 💡 Prusa balance game - Darth Vader, Stormtrooper, Mandalorian, Yoda, Dwayne The Rock Johnson, Pinguin, Tux, Snowman, Christmas Tree, Gnome, Santa, Benchy, Pikachu,…

Downloads
2,251
Likes
359
Rating
5
P
PrintablesCrazy3D

Cute pinguin with santa hat

Here you have a cute pinguin with a santa hat. The white render picture shows the 3D model you can download here, the colored picture shows ONLY a painting recommendation. Would be happy to see your makes! It is partly AI generated and i…

Downloads
1,868
Likes
292
Rating
5
P
PrintablesMZ4250

Barbarian Santa Claus

Want to access even more models not found here? Interested in supporting my efforts making free models for the world to enjoy? Check out my patreon page here: https://www.patreon.com/mz4250 Patrons have access to all my files in one…

Downloads
1,856
Likes
250
Rating
5
P
PrintablesCrazy3D

Cool Santa Clause

Here you have Santa with sunglasses. The white render picture shows the 3D model you can download here, the colored picture shows ONLY a painting recommendation. Would be happy to see your makes! It is partly AI generated and i optimized…

Downloads
1,776
Likes
209
Rating
5
P
PrintablesTeraBite

Baby Penguin Love Sant Valentine Clay character kawaii 3D Model

Baby Penguin Love Sant Valentine Clay character kawaii 3D Model

Downloads
1,683
Likes
208
Rating
4.33
P
Printablesromek142

Collapsable fidget Santa's hat

Collapsable fidget Santa's hat. A cool Christmas decoration. It looks nice and is fun to play with. It's very easy to print. No supports, etc. When you print the hat in red, you should change the color to white on layer 106. Unless you…

Downloads
1,601
Likes
406
Rating
4.5
P
PrintablesMaxT

Christmas Door Trim Corner 27 - Santa Sleigh and Reindeer and Snowflake (Christmas ornament)

https://www.buymeacoffee.com/maxt ---------------------- 4mm thick to ensure stability The model will fit on Prusa Mini+ (180x180) Feel free to size it up or down as you wish The best quality is achieved if printed face down Print: 0.2mm…

Downloads
1,566
Likes
346
Rating
5
P
PrintablesNakozen

Gingerbread Santa's Sleigh Kit Cards

Merry Christmas everybody! Apologies for taking so long to bring this one out, it has been a slightly busier month than usual. Riding on a similar theme to my popular Gingerbread House kit I bring you Santa Claus' sleigh, which of course…

Downloads
1,555
Likes
585
Rating
5
P
PrintablesAk_fx

Baby Yoda Christmas - Santa Costume

Christmas baby Yoda - :) No AI was used in the making of this model. The image is a render based on the gcode from prusaslicer. Check it out on makerworld as well if you have a bambulabs 3d printer!…

Downloads
1,549
Likes
328
Rating
5
P
PrintablesMaxT

Christmas Door Trim Corner 23 - Santa Sleigh and Reindeer and Gifts (Christmas ornament)

https://www.buymeacoffee.com/maxt ---------------------- 4mm thick to ensure stability The model will fit on Prusa Mini+ (180x180) Feel free to size it up or down as you wish The best quality is achieved if printed face down Print: 0.2mm…

Downloads
1,504
Likes
328
Rating
5
P
PrintablesJayBird_25

Balancing Santa Hat

This small santa hat has a special trick: it balances! Printing Instructions (Standard): I recommend PLA with 0.2mm layer height, 5-10% infill, 2-3 walls, and no supports! Print as oriented. I printed in matte white PLA and colored the…

Downloads
1,487
Likes
486
Rating
4.93
P
Printablesgalgub

Santa sleigh with style - NO supports needed

Elegant sleigh with built-in decorative elements. most of my hard work went to make sure you'll be able to print it easily - no supports or rafts needed, just a tiny bit of glue. I made 0.5 tolerances, so the parts should easily fit, even…

Downloads
1,479
Likes
366
Rating
4.92
P
Printables29flo

Christmas Wall Decoration - Santa Claus

Here is: Christmas Wall Decoration - Santa Claus Fast and easy 1 color print. You can adjust the scale as desired, but be mindful not to make it too thin.

Downloads
1,469
Likes
244
Rating
4.4
P
PrintablesLastByte

Cruz de Santiago Sugar Stencil

This is a stencil to create the sugar cross design the Almond Cake is famous for. The stencil is 10 inches tall so you would have to scale it within Cura to fit your cake pan. Additionally it has a raised area for easy removal after the…

Downloads
1,462
Likes
10
Rating
5
P
Printables3D MAGIC

Christmas village with Santa and raindeers

This charming 3D-printed Christmas village features a cozy cluster of snow-covered houses nestled inside a crescent-moon frame. Detailed pine trees surround the tiny homes, adding to the wintry scene. Above the moon, Santa Claus and his…

Downloads
1,413
Likes
228
Rating
5
P
Printables3DPrintable

Santa Claus Low Poly Ornament

Pictures of a 4 color print of both models. Easy print without supports . COMMERCIAL LICENSE AVAILABLE: https://patreon.com/3DPA Check out our other models . Your likes and downloads support more content. Happy printing!

Downloads
1,391
Likes
388
Rating
4.88
P
PrintablesDecorartor

Santa Clause Vase

The "Santa Claus Vase" adds a delightful touch of festive spirit to your holiday decor. Crafted to resemble Santa’s jolly face with a fluffy white beard and signature red hat, this vase brings a whimsical charm to any space. The textured…

Downloads
1,353
Likes
587
Rating
4.89
P
PrintablesMatteo Pascale

Croissant

Realistic photogrammetry croissant. If you want the model with textures you can find it on cgtrader.

Downloads
1,223
Likes
59
Rating
5
P
Printablesdrodfro

Santa Hat MMU

Santa Hat to be printed with mmu. Don't try to print it to be glued, it won't work. Haven't printed this one yet but I don't see anything that can be a problem in PrusaSlicer. It's meant as decoration not to be worn but you do you XD.

Downloads
1,165
Likes
132
Rating
4.9
P
PrintablesMaxT

Christmas Window Decor - Santa Sleight above Houses Silhouettes

https://www.buymeacoffee.com/maxt ---------------------- 3D print with 5 different houses that can be placed in a window. You have the possibility to change the houses and rotate them in whatever way you please. The houses can also…

Downloads
1,163
Likes
244
Rating
5
P
PrintablesMaxT

Santa Sleigh and Snowman in a bauble (Christmas tree ornament)

https://www.buymeacoffee.com/maxt ---------------------- 2mm thick The best quality is achieved if printed face down Print: 0.2mm Nozzle: 0.4mm Support: Not needed Brim: Not needed Infill: Not needed, but I'd suggest going with 100% to…

Downloads
1,156
Likes
151
Rating
4.78
P
PrintablesRok Bukva

Christmas Santa Hat/Cap

No support needed.

Downloads
1,128
Likes
81
Rating
5
P
PrintablesDotCom Artwork

Los Santos GTA V 3D Miniature

3d miniature of Los Santos, from GTA V. Model created in Blender using the openiv software. This version is still a test phase, I will try to release a V2 that goes to fix the division of sectors, so as not to leave pieces too small to…

Downloads
1,126
Likes
105
Rating
5
P
PrintablesFire3D

Dummy 13 Santa Hat

This Santa hat will put you in the Christmas spirit and brighten up the look of your Dummy 13. I recommend printing with supports to get the best print quality. Merry Christmas!

Downloads
1,087
Likes
442
Rating
4.75
P
PrintablesCrazy3D

Santa Clause

Here you have a really cute Santa Clause. The colored picture shows a painting recommendation. The white render picture shows the 3D model you can download here, the colored picture shows ONLY a painting recommendation. Would be happy to…

Downloads
1,071
Likes
124
Rating
5
P
PrintablesMelix

Croissant Christmas ornament

Oui oui, I have croissants in my Christmas tree! This is one of my first designs I made in Fusion a couple of years ago. And every year people say how cool they think the croissant ornaments are in my Christmas tree 🥐🎄 Size…

Downloads
1,026
Likes
410
Rating
5
P
PrintablesIdea Prints

Christmas Door Trim Corner - Santa claus #4

Christmas Door Trim Corner - Santa claus🎅 ⛄Ciao sono il pupazzo che vedi nella foto, sarei molto contento se metti un like e scarichi il mio progetto per un grandissimo supporto👍 ⛄Hi I’m the puppet you see in the picture, I would be very…

Downloads
1,009
Likes
181
Rating
5
P
PrintablesWekster

Mini Santa Clause

If you like this model check my other stuff, check out my www.patreon.com/wekster or my youtube channel www.youtube.com/wekster

Downloads
1,003
Likes
217
Rating
4.89
P
PrintablesTJ78

Santa Claus supportless

Happy printing. Print Settings Supports: No Category: Art

Downloads
985
Likes
66
Rating
5
P
PrintablesThe_5thDoctor

Santa Hat For Articulated Snowman

I modified the Santa hat by Rok Bukva to fit on top of the 3D Printy snowman fidget. The hat is designed to have a lip over top of the head to help define it a bit more from just appearing like a part of the snowman head, incase you…

Downloads
980
Likes
127
Rating
4.93
P
PrintablesNinja

Santa Duck

Its a Rubber Ducky with a Santa Hat! Its a remix of a rubber duck from https://www.printables.com/model/68384-duck-duck-gray-duck/files. a remix of Santa Hat from https://www.thingiverse.com/thing:5330 **update added a version with solid…

Downloads
943
Likes
105
Rating
4.86
P
PrintablesIan Gibb

Santa Hat

Can be printed without supports but I tend to keep them on. Printed on modded cr-10 0.6mm nozzle 0.2mm layer height top/bottom layers 6

Downloads
940
Likes
67
Rating
4.8
P
PrintablesTypQxQ

Santa Hat for tow bar of car (secured). Hitch cover

Easily printable without support and attaches to a European style tow bar with a ball of 50mm. Color can be printed by manually changing filament while pausing print at specific height or in a Tool Changer, MMU or other multi material…

Downloads
909
Likes
243
Rating
4.91
P
PrintablesMioPrint

Pocket Santorini (with box)

Santorini is a 2-4 player board game that's almost completely made out of 3D shapes that stack on top of each other, which makes it perfect to 3D print. You can find the official rules of this game here:…

Downloads
894
Likes
306
Rating
4.93
P
PrintablesChess&Jesus

Knitted Snowman with Santa Hat

A Snowman I will be printing for my sister because she specifically wanted a snowman without arms but with a Santa Hat. Scarf v2 and v3 now available Can be printed without the scarf if you don't want it. Hat Brim v2 hole is now 15.4mm…

Downloads
886
Likes
306
Rating
4.75
P
PrintablesKolbi

Christmas Cookie Biscuit Gingerbread Cutters (vykrajovátka na sušenky perník Vánoce) Part_02 13Pcs, Angel, Bell, Bow, Carp, Fish, Comet, Shooting Star, Horseshoe, Christmas Tree, Church, Pig, Roll Croisant, Snowman, Star, Anděl, Zvoneček, Mašlička, Kapr

Christmas Cookie Biscuit Gingerbread Cutter (approx 55 mm) You can change scale in the Fusion 360 File in Parameters Table, for make the cutters bigger (X and Y axis), without to increase the wall thickness. (See attached picture with…

Downloads
873
Likes
111
Rating
5
P
PrintablesKONEz*347

Santa Sleigh & Reindeer Christmas Decoration

Santa Sleigh & Reindeer Christmas Decoration

Downloads
864
Likes
220
Rating
5
P
PrintablesLoyal Moses

Santa Boot

Gifted to the Moses Family by Nick Dimelow (@bugman_140) - Santa Boot! We wanted to share this with everyone who participated in the BMR 2021 Christmas Community Print Drive! Thank you! It was such a huge success, and I can't wait to see…

Downloads
860
Likes
95
Rating
5
P
PrintablesstlDenise

Fred the Frog but he's wearing a Santa Hat

A remix of our favorite 3d printed frog, Fred! The original print is on, ahem, another website, but allows remixes and oh boy, some of the remixes this frog gets! We wanted a Christmas frog – and a hat that prints without supports.

Downloads
842
Likes
154
Rating
4.8
P
Printablesgizmojim

Santa's Helper's Sleigh

Print two copies of the SleighFrame and one of the SleighBody. I may add a draft to force a stop, but the Frame fits both sides of the Body. Print instructions Category: Vehicles Summary Print two copies of the SleighFrame and one of the…

Downloads
827
Likes
141
Rating
4.8
P
PrintablesJosef Talac

Santiago Bernabeu - Real Madrid stadion

Miniature of Real Madrid stadion Print Layer high: max 0.3 mm infill: 15% material: PETG, PLA

Downloads
804
Likes
45
Rating
0
P
PrintablesSzvmkn

Funny Articulated Dachshund with Santa Hat

A festive articulated dachshund figurine made from brown filament, 3D-printed and posed lying down on a clean white background. The dog features segmented joints for flexible movement and wears a red and white Santa hat, adding a cheerful…

Downloads
802
Likes
179
Rating
5
P
PrintablesBemko

Gnome / Santa Christmas earrings

Cute Christmas themed earrings. Can be printed on any printer - no multicolor needed! Just print the 3mf elements separately in the following order: red base black shoes white beard pink/beige nose Layer height should be 0.15mm. It is…

Downloads
796
Likes
220
Rating
4.5
P
Printablesdooby

Santorini Succulent Planter (w/pool and windows!)

This is a remix of a remix. This planter captures the essence of Santorini, Greece. The drains in the bottom of the planter will drain directly into the pool, filling it. This can be printed with no supports! I added authentic looking…

Downloads
790
Likes
305
Rating
4.86
P
PrintablesFacu barbero

Adorable Minimalist Santa Claus – The Perfect 3D Printed Holiday Decor!

Bring the magic of Christmas to life with this charming minimalist Santa Claus design, crafted to add a modern yet cozy touch to your holiday decorations. This unique 3D printable model perfectly balances simplicity and festive cheer,…

Downloads
788
Likes
157
Rating
5
P
PrintablesMarko Ciganovic

Coca Cola Santa Claus Cookie Cutter

Santa Claus cookie cutter made from drawing from the internet. Sharp edges and clear details.

Downloads
787
Likes
168
Rating
5
P
Printables3DP-MAMSIH

AMUSANT ! VORON TEST CUBE (keychain)

10/01/2022 added 2 more cubes for more challange … Voron_test_cube_30x30mm Voron_test_cube_25x25mm 3 Section of 40x40mm Rotatory cube 40x40mm keychain Tolerance inside of 0.3mm (40x40mm one ) Test some overhanges / flowRate / bridges…

Downloads
772
Likes
96
Rating
4.93
P
PrintablesDimensional

Knitted Santa Claus (IN PARTS)

Knitted Santa Claus This charming model depicts a knitted Santa Claus, perfect as a festive decoration. Santa features a texture resembling knitting stitches, giving him a unique, cozy appearance. Details such as his signature hat, beard,…

Downloads
764
Likes
356
Rating
4.96
P
PrintablesLayerModels

Build a christmas santa - Standing version

Check out all versions & support my work! HERE DESCRIPTION Santa is back in town! This cute christmas miniature will warm your heart and bring a smile on your face. Just make sure he doesn't steal your christmas gifts! Print santa in…

Downloads
762
Likes
121
Rating
4.33
P
PrintablesRadek

Ellie - The Last of Us part 2 - Santa Barbara

PLA At least 15% cubic infill. Detail or ultradetail preset. Use supports. Another Last of Us models here: https://www.printables.com/cs/@RadekSiska_422917/collections/799605 Happy printing!

Downloads
753
Likes
70
Rating
5
P
PrintablesKolbi

Christmas Cookie Biscuit Gingerbread Cutters (vykrajovátka na sušenky perník Vánoce) Part_01 9Pcs, Gingerbread Man (Reindeer) Panáček Sob, Glove Rukavice, House, Christmas Sock, Lollipop, Santa Claus Mikuláš, Sleigh Saně, Snowflake Vločka, Star Hvězda

Christmas Cookie Biscuit Gingerbread Cutter (approx 85 mm) You can change scale in the Fusion 360 File in Parameters Table, for make the cutters bigger (X and Y axis), without to increase the wall thickness. (See attached picture with…

Downloads
745
Likes
66
Rating
5
P
Printablesxynon

Cute mini Santa octopus

A Santa version of the cute mini octopus file.

Downloads
732
Likes
90
Rating
4.71
P
PrintablesMaxT

Christmas Door Trim Corner 50 - Santa Hat and Ho Ho Ho (Christmas ornament)

https://www.buymeacoffee.com/maxt ---------------------- 4mm thick to ensure stability The model will fit on Prusa Mini+ (180x180) Feel free to size it up or down as you wish I strongly suggest sizing it up to fit your entire heat bed as…

Downloads
730
Likes
133
Rating
4.85
P
PrintablesBiocraftlab

Santa Dragon - Articulated Keychain Figure

Ho ho ho… Here comes the Santa Dragon! 🎅🐉🎄 Straight from the snowy skies of the North Pole, the Santa Dragon swoops in to deliver presents, cheer, and a little bit of fire-powered Christmas magic. This fully articulated flexi dragon…

Downloads
721
Likes
207
Rating
5
P
PrintablesBrickDreams

Santa Claus Brick MegaFigure (5:1 Scale)

This is a set of pieces that can be used to recreate the Santa Series 8 figure at 500% scale. This figure was included in 7 sets between 2012 - 2106, but the set we focused on when creating this design was Santa's Workshop published in…

Downloads
718
Likes
135
Rating
5
P
Printablesromek142

Big collapsable fidget Santa's Hat

Collapsable fidget Santa's hat, bigger version. Today I would like to present the second, larger version of the Santa hat.

Downloads
718
Likes
174
Rating
4
P
PrintablesRoland Brandt

Santa Claus Moon Sled

An unusual 3D printable Santa Claus silhouette riding a sleigh across a crescent moon.

Downloads
714
Likes
149
Rating
0
P
Printables3DPrintable

Santa Christmas Tree Topper

Pictures of a 4 color print sprayed with snow effect. It was cut in half and glued together for an easy print without supports. COMMERCIAL LICENSE AVAILABLE: https://patreon.com/3DPA Check out our other models . Your likes and downloads…

Downloads
709
Likes
99
Rating
5
P
PrintablesDotCom Artwork

Los Santos (GTA 5) miniature

3d miniature of the iconic city of Los Santos (GTA5) Slicing & Printing Details This model was designed to be printed with a 0.4mm nozzle and 0.16mm layer heights. Try using a 0.2mm nozzle (0.08mm layer heights) or scaling up for even…

Downloads
709
Likes
114
Rating
4.67
P
PrintablesJS-studio

Santa Bust

Bust of Santa from the movie Christmas Chronicle An improved version of my older Santa I ALSO ADDED A VERSION FOR HANGING ON A CHRISTMAS TREE MERRY CHRISTMAS 2020 Print instructions I recommend supports under his chin, nose and his cap

Downloads
696
Likes
112
Rating
5
P
PrintablesLele88

Flexi Reindeer Rex Sleigh Santa Claus (with step file)

I really like dinosaurs, and one of my favorite models to 3D print is https://www.printables.com/it/model/46241-flexi-rex-with-stronger-links . I decided to remix this file by adding Santa's sleigh to it. An unusual reindeer XDXD Mi…

Downloads
690
Likes
186
Rating
5
P
PrintablesHappy-3D

Dead Santa

Dead Santa war früher der coolste Typ am Nordpol. Er futterte so viele Plätzchen, dass selbst die Elfen meinten: „Bruder, das wird nicht gut enden.“ Tja – sie hatten recht. Eines Tages verschluckte er sich an einem XXL-Lebkuchen. Seitdem…

Downloads
679
Likes
129
Rating
5
P
PrintablesAndrew_Sink

Rodin Voronoi Sculpture / Right Hand of Pierre and Jacques de Wissant

I've wanted to create a Rodin Voronoi sculpture for several years, and this is my first! I modified the scan created by Aaron Humphreys on MyMiniFactory , and added Voronoi texturing in MeshMixer. From the Musee Rodin site : Rodin worked…

Downloads
666
Likes
162
Rating
5
P
Printables3DCraft

Santa Girl Sculpture

Elegant 3D Printed Christmas Art

Downloads
657
Likes
66
Rating
0